CIENA-CES-IP-INTERFACE-MIB

All MIBs › CIENA-CES-IP-INTERFACE-MIB

Organization: Ciena Corp.

Last Updated: 2018-12-11

Description: Ciena CES MIB defining IP interface configuration objects and link-up/link-down notifications for IP management interfaces on Ciena packet networking equipment

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-CES-IP-INTERFACE-MIB?

CIENA-CES-IP-INTERFACE-MIB is part of Ciena's Carrier Ethernet Solutions (CES) MIB family for Ciena packet-networking/service-aggregation platforms. It defines IP data interface configuration objects and, notably, link-up/link-down style notifications for the device's IP management/data interfaces. Its monitoring role centers on interface operational-status tracking and fault detection—operators use it to watch an IP interface's operational state going up or down and to see how an interface's state depends on an associated Layer-2 VPN service. It builds on and complements standard interface MIBs (IF-MIB) and Ciena's broader CES/Waveserver MIB suite, since it is scoped narrowly to IP interface notifications rather than full interface statistics. It is deployed in carrier/service-provider packet-optical networks where Ciena CES equipment provides IP-based management or service interfaces that must be monitored for connectivity faults. Network engineers evaluating or troubleshooting this functionality can download the CIENA-CES-IP-INTERFACE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-CES-IP-INTERFACE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena CES (Carrier Ethernet Solutions) packet networking platforms

Monitoring Examples

An admin would watch cienaCesIpDataInterfaceOperState transition (e.g., up to down) as a link-state notification, and check cienaCesIpDataInterfaceL2VpnDependency to understand whether the down state also affects a dependent L2VPN service. A flurry of down-state notifications on an IP interface with an active L2VPN dependency would indicate a service-impacting fault requiring immediate attention rather than a benign management-plane blip.

What Can Be Monitored

IP interface operational state (up/down)
IP interface L2VPN dependency
link-state change events

Imported Objects

From CIENA-GLOBAL-MIB

cienaGlobalMacAddress	OBJECT-TYPE
cienaGlobalSeverity	OBJECT-TYPE

From CIENA-SMI

cienaCesConfig	OBJECT-IDENTITY
cienaCesNotifications	OBJECT-IDENTITY

From CIENA-TC

CienaGlobalState

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cienaCesIpInterfaceMIB	1.3.6.1.4.1.1271.2.1.8			This module defines the IP interface related notifications.
cienaCesIpInterfaceMIBObjects	1.3.6.1.4.1.1271.2.1.8.1
cienaCesIpInterface	1.3.6.1.4.1.1271.2.1.8.1.1
cienaCesIpMgmtInterfaceTable	1.3.6.1.4.1.1271.2.1.8.1.1.1		not-accessible	Table of management IP addresses and their associated attributes.
cienaCesIpMgmtInterfaceEntry	1.3.6.1.4.1.1271.2.1.8.1.1.1.1		not-accessible	Each entry represents a management interface configuration parameter.
I32 cienaCesIpMgmtInterfaceIndex	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.1	Integer32	not-accessible	Unique identifier of this interface.
STR cienaCesIpMgmtInterfaceName	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.2	DisplayString	read-only	The friendly and unique name for the IP interface.
IP cienaCesIpMgmtInterfaceOperIpAddr	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.3	IpAddress	read-only	The operational IP address associated with this interface.
IP cienaCesIpMgmtInterfaceOperSubnet	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.4	IpAddress	read-only	The operational subnet mask associated with this IP address/interface.
INT cienaCesIpMgmtInterfaceAdminState	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.5	INTEGER	read-only	The admin status of each interface. A value of: - enabled(1) indicates that this interface is administratively enabled - disabled(2) indicates that this interface is administratively disabled - shutdown(3) indicates a shutdown state of DCN interface
INT cienaCesIpMgmtInterfaceOperState	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.6	INTEGER	read-only	The operational status of each interface. A value of: - enabled(1) indicates that this interface is operationally enabled - disabled(2) indicates that this interface is operationally disabled
INT cienaCesIpMgmtInterfaceType	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.7	INTEGER	read-only	The type of management IP interface.
I32 cienaCesIpMgmtInterfaceVirtualSwitchIndex	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.8	Integer32	read-only	The virtual switch index associated with this interface (zero if none).
I32 cienaCesIpMgmtInterfaceParentInterfaceIndex	1.3.6.1.4.1.1271.2.1.8.1.1.1.1.9	Integer32	read-only	The parent interface index associated with this interface (zero if none).
IP cienaCesIpGatewayAddr	1.3.6.1.4.1.1271.2.1.8.1.1.2	IpAddress	read-only	The gateway address.
cienaCesIpDataInterfaceTable	1.3.6.1.4.1.1271.2.1.8.1.1.3		not-accessible	Data Interface entry.
cienaCesIpDataInterfaceEntry	1.3.6.1.4.1.1271.2.1.8.1.1.3.1		not-accessible	Each entry represents a data interface configuration parameter.
I32 cienaCesIpDataInterfaceIndex	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.1	Integer32	not-accessible	Unique index into the table.
STR cienaCesIpDataInterfaceName	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.2	DisplayString	read-only	The name for this Data IP interface.
IP cienaCesIpDataInterfaceIpAddr	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.3	IpAddress	read-only	IP address associated with this interface. Deprecated in lieu of cienaCesIpDataInterfaceInetAddr.
IP cienaCesIpDataInterfaceMask	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.4	IpAddress	read-only	The subnet mask associated with this ip address/interface. Deprecated in lieu of cienaCesIpDataInterfaceInetAddrPrefixLength.
I32 cienaCesIpDataInterfaceVsIndex	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.5	Integer32	read-only	The vIndex associated with this Data IP interface.
INT cienaCesIpDataInterfaceType	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.6	INTEGER	read-only	The type of Data IP interface.
I32 cienaCesIpDataInterfaceIfIndex	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.7	Integer32	read-only	The unique interface index assigned by INET.
MAC cienaCesIpDataInterfaceMac	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.8	MacAddress	read-only	MAC address assigned by the device to this Data interface.
I32 cienaCesIpDataInterfaceIfMtu	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.9	Integer32	read-only	The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
CIE cienaCesIpDataInterfaceAdminState	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.10	CienaGlobalState	read-only	The Admin State of Data IP interface.
CIE cienaCesIpDataInterfaceOperState	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.11	CienaGlobalState	read-only	The Oper State of Data IP interface.
T/F cienaCesIpDataInterfaceIpForwarding	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.12	TruthValue	read-only	The Ip Forwarding State of Data IP interface.
T/F cienaCesIpDataInterfaceLdpEnable	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.13	TruthValue	read-only	Determines if LDP is enabled on the Data IP interface.
T/F cienaCesIpDataInterfaceRsvpEnable	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.14	TruthValue	read-only	Determines if RSVP is enabled on the Data IP interface.
T/F cienaCesIpDataInterfaceTunnelDependency	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.15	TruthValue	read-only	Determines if Tunnel entities using the interface.
T/F cienaCesIpDataInterfaceL2VpnDependency	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.16	TruthValue	read-only	The L2Vpn association of the interface.
T/F cienaCesIpDataInterfaceOspfEnable	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.17	TruthValue	read-only	The OSPF attachment to the Data interface.
T/F cienaCesIpDataInterfaceIsisEnable	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.18	TruthValue	read-only	The ISIS attachment to the Data interface.
T/F cienaCesIpDataInterfaceStaticArpEnable	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.19	TruthValue	read-only	The Static ARP attachment to the Data interface.
T/F cienaCesIpDataInterfaceVccvDependency	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.20	TruthValue	read-only	The VCCV Profile association to the Data interface.
T/F cienaCesIpDataInterfacePtpEnable	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.21	TruthValue	read-only	The PTP attachment to the Data interface.
U32 cienaCesIpDataInterfaceIfNum	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.22	Unsigned32	read-only	This represent interface number.
IP cienaCesIpDataInterfaceStaticArpDestinationIp	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.23	IpAddress	read-only	The static ARP attachment destination IP address to the data interface. IpAddress value returned is only valid if cienaCesIpDataInterfaceStaticArpEnable is true.
MAC cienaCesIpDataInterfaceStaticArpDestinationMac	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.24	MacAddress	read-only	The static ARP attachment destination MAC address to the data interface. MacAddress value returned is only valid if cienaCesIpDataInterfaceStaticArpEnable is true.
INT cienaCesIpDataInterfaceRole	1.3.6.1.4.1.1271.2.1.8.1.1.3.1.25	INTEGER	read-only	The Role State of the IP Interface. The default role is control-plane, which is the regular MPLS L3 interface. When role is specified as connectivity, it is used for EVC Ping feature. When role is specified as benchmark it is used for RFC 2544 Benchmark feature.
MAC cienaCesIpInterfaceL3InterfaceBaseMac	1.3.6.1.4.1.1271.2.1.8.1.1.4	MacAddress	read-only	The base MAC address for L3 interfaces.
cienaCesIpDataInterfaceInetTable	1.3.6.1.4.1.1271.2.1.8.1.1.5		not-accessible	Table of ip-interface IP addresses and their associated attributes.
cienaCesIpDataInterfaceInetEntry	1.3.6.1.4.1.1271.2.1.8.1.1.5.1		not-accessible	Each entry represents an ip-interface configuration parameter.
IPt cienaCesIpDataInterfaceInetIndexAddrType	1.3.6.1.4.1.1271.2.1.8.1.1.5.1.1	InetAddressType	not-accessible	This OID specifies the Inet address type of the OIDs cienaCesIpDataInterfaceInetIndexAddr. When representing: ipv4 : cienaCesIpDataInterfaceInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : cienaCesIpDataInterfaceInetAddr should be compliant with InetAddressIPv6 from RFC 4001
IP cienaCesIpDataInterfaceInetIndexAddr	1.3.6.1.4.1.1271.2.1.8.1.1.5.1.2	InetAddress	not-accessible	Inet address associated with this interface. This OID should be used in conjuction with cienaCesIpDataInterfaceInetIndexAddrType. This value should be compliant with RFC 4001 InetAddressType.
ADR cienaCesIpDataInterfaceInetAddrPrefixLength	1.3.6.1.4.1.1271.2.1.8.1.1.5.1.3	InetAddressPrefixLength	read-only	Specifies the address prefix length. This OID should be used in conjuction with cienaCesIpDataInterfaceInetAddrType. This OID should be compliant with RFC 4001 InetAddressPrefixLength.
IPt cienaCesIpDataInterfaceInetAddrType	1.3.6.1.4.1.1271.2.1.8.1.1.5.1.4	InetAddressType	read-only	This OID specifies the Inet address type of the OIDs cienaCesIpDataInterfaceInetAddr and cienaCesIpDataInterfaceInetAddrPrefixLength. When representing: ipv4 : cienaCesIpDataInterfaceInetNotifAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : cienaCesIpDataInterfaceInetNotifAddr should be compliant with InetAddressIPv6 from RFC 4001
IP cienaCesIpDataInterfaceInetAddr	1.3.6.1.4.1.1271.2.1.8.1.1.5.1.5	InetAddress	read-only	Inet address associated with this interface. This OID should be used in conjuction with cienaCesIpDataInterfaceInetAddrType. This value should be compliant with RFC 4001 InetAddressType.
cienaCesIpInterfaceMIBConformance	1.3.6.1.4.1.1271.2.1.8.3
cienaCesIpInterfaceMIBCompliances	1.3.6.1.4.1.1271.2.1.8.3.1
cienaCesIpInterfaceMIBGroups	1.3.6.1.4.1.1271.2.1.8.3.2
cienaCesIpInterfaceMIBNotificationPrefix	1.3.6.1.4.1.1271.2.2.8
cienaCesIpInterfaceMIBNotifications	1.3.6.1.4.1.1271.2.2.8.0
NTF cienaCesIpMgmtInterfaceAddrChgNotification	1.3.6.1.4.1.1271.2.2.8.0.1			A cienaCesIpMgmtInterfaceAddrChgNotification is sent when the IP address of an interface changes. To enable the device to send this notification, cienaCesIPMgmtInterfaceAddrChangeTrapState needs to be set to enabled. The cienaCesIPMgmtInterfaceAddrChangeTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesIpMgmtInterfaceName, cienaCesIpMgmtInterfaceOperIpAddr, and cienaCesIpMgmtInterfaceOperSubnet.
NTF cienaCesIpMgmtInterfaceGatewayChgNotification	1.3.6.1.4.1.1271.2.2.8.0.2			A cienaCesIpMgmtInterfaceGatewayChgNotification is sent when the IP address of an interface gateway changes. To enable the device to send this notification, cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState needs to be set to enabled. The cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesIpGatewayAddr.
NTF cienaCesIpInterfaceUpNotification	1.3.6.1.4.1.1271.2.2.8.0.3			A cienaCesIpInterfaceUpNotification trap signifies that the SNMP entity, acting in an agent role, has detected the interface's status has become operationally up. This object is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesIpDataInterfaceName, cienaCesIpDataInterfaceIfIndex, cienaCesIpDataInterfaceAdminState, cienaCesIpDataInterfaceOperState.
NTF cienaCesIpInterfaceDownNotification	1.3.6.1.4.1.1271.2.2.8.0.4			A cienaCesIpInterfaceDownNotification trap signifies that the SNMP entity, acting in an agent role, has detected the interface's status has become operationally up. This object is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesIpDataInterfaceName, cienaCesIpDataInterfaceIfIndex, cienaCesIpDataInterfaceAdminState, cienaCesIpDataInterfaceOperState.

RFC description

Manages IP interface configuration and status including notifications for IP interface link up/down events on Ciena equipment.

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-CES-IP-INTERFACE-MIB

What Is CIENA-CES-IP-INTERFACE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description