All MIBs › CIENA-CES-IP-INTERFACE-MIB › cienaCesIpDataInterfaceInetAddrType
cienaCesIpDataInterfaceInetAddrType
Module: CIENA-CES-IP-INTERFACE-MIB
OID (symbolic): CIENA-CES-IP-INTERFACE-MIB::cienaCesIpDataInterfaceInetAddrType
OID (numeric): 1.3.6.1.4.1.1271.2.1.8.1.1.5.1.4
Node type: OBJECT-TYPE
Type: InetAddressType
Access: read-only
Description: This OID specifies the Inet address type of the OIDs cienaCesIpDataInterfaceInetAddr and cienaCesIpDataInterfaceInetAddrPrefixLength. When representing: ipv4 : cienaCesIpDataInterfaceInetNotifAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : cienaCesIpDataInterfaceInetNotifAddr should be compliant with InetAddressIPv6 from RFC 4001
What is cienaCesIpDataInterfaceInetAddrType?
This specifies whether the address reported by cienaCesIpDataInterfaceInetAddr, and the prefix length alongside it, should be interpreted as an IPv4 or IPv6 address, per RFC 4001 conventions. An admin polling this table via automated tooling needs to check this type field first, since parsing the InetAddr value incorrectly, treating an IPv6 address as IPv4-length bytes for example, would produce garbage results. A value of ipv6(2) tells the polling tool to interpret the accompanying address as a 16-byte IPv6 address rather than a 4-byte IPv4 one.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.8.1.1.5.1.4 snmpwalk -v2c -c public <target> CIENA-CES-IP-INTERFACE-MIB::cienaCesIpDataInterfaceInetAddrType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.8.1.1.5.1.4.1 snmpget -v2c -c public <target> CIENA-CES-IP-INTERFACE-MIB::cienaCesIpDataInterfaceInetAddrType.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-IP-INTERFACE-MIB::cienaCesIpDataInterfaceInetAddrType OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.8 | cienaCesIpInterfaceMIB | CIENA-CES-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.1271.2.1.8.1 | cienaCesIpInterfaceMIBObjects | CIENA-CES-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.1271.2.1.8.1.1 | cienaCesIpInterface | CIENA-CES-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.1271.2.1.8.1.1.5 | cienaCesIpDataInterfaceInetTable | CIENA-CES-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.1271.2.1.8.1.1.5.1 | cienaCesIpDataInterfaceInetEntry | CIENA-CES-IP-INTERFACE-MIB |
| 1.3.6.1.4.1.1271.2.1.8.1.1.5.1.4 | cienaCesIpDataInterfaceInetAddrType | CIENA-CES-IP-INTERFACE-MIB |