CCPOWER-MIB

All MIBs › CCPOWER-MIB

Category: DOCSIS and Cable

Description: Manages cable and carrier power supply monitoring including power levels, battery backup status, and power event notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CCPOWER-MIB?

CCPOWER-MIB is a private proprietary MIB (enterprise OID 18642) reporting DC rectifier power-plant status, including scheduled load-shedding (disconnect) control. Its objects cover float voltage, overload current, high/low voltage alarms, and up to several disconnect groups each with voltage/temperature thresholds and per-day-of-week (Sunday through Saturday) load-shed-off schedule flags. As a configuration/status MIB it lets an administrator confirm rectifier float voltage and audit which days a load-shed disconnect group is scheduled to remain off. It is deployed on DC rectifier/power-plant equipment implementing this private MIB. Engineers can download the CCPOWER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CCPOWER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DC rectifier/power-plant equipment (enterprise OID 18642)

Monitoring Examples

An administrator checks floatVoltage against highVoltageAlarm/lowVoltageAlarm thresholds to confirm a DC rectifier power plant is operating within normal range.

What Can Be Monitored

rectifier float voltage and scheduled load-shed disconnects

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT acFailureAlarmStatus	1.3.6.1.4.1.18642.1.2.4.5	INTEGER	read-only	AC failure alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF acFailureTrap	1.3.6.1.4.1.18642.0.16			Rectifier has lost AC input power. Return value: AC failure.
NTF acFailureTrapClear	1.3.6.1.4.1.18642.0.116			AC failure alarm been cleared.
alarmStatus	1.3.6.1.4.1.18642.1.2.4
batteries	1.3.6.1.4.1.18642.1.2.2
INT batteryCurrent	1.3.6.1.4.1.18642.1.2.2.1	INTEGER	read-only	Battery current. Return value is XXXX representing XXXX amps. Valid ranges are 0000 to 1000 amps.
INT batteryCurrentAlarmStatus	1.3.6.1.4.1.18642.1.2.4.16	INTEGER	read-only	Battery resistance alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT batteryCycles1	1.3.6.1.4.1.18642.1.2.2.6	INTEGER	read-only	Number of discharge/recharge cycles less than 1 minute. Return value is XXX representing XXX cycles. Valid ranges are 000 to 255 cycles.
INT batteryCycles15	1.3.6.1.4.1.18642.1.2.2.9	INTEGER	read-only	Number of discharge/recharge cycles greater than 15 minutes. Return value is XXX representing XXX cycles. Valid ranges are 000 to 255 cycles.
STR batteryCycles15LastCycleDate	1.3.6.1.4.1.18642.1.2.2.10	DisplayString	read-only	Last cycle date of batteryCycles15. Return value is MM-DD-YY, HH-MM.
INT batteryCycles15LastDuration	1.3.6.1.4.1.18642.1.2.2.11	INTEGER	read-only	Duration of batteryCycles15 last cycle. Return value is XXXX representing XXXX minutes.
INT batteryCycles1to5	1.3.6.1.4.1.18642.1.2.2.7	INTEGER	read-only	Number of discharge/recharge cycles from 1 to 5 minutes. Return value is XXX representing XXX cycles. Valid ranges are 000 to 255 cycles.
INT batteryCycles5to15	1.3.6.1.4.1.18642.1.2.2.8	INTEGER	read-only	Number of discharge/recharge cycles from 5 to 15 minutes. Return value is XXX representing XXX cycles. Valid ranges are 000 to 255 cycles.
INT batteryDisconnectAlarmStatus	1.3.6.1.4.1.18642.1.2.4.20	INTEGER	read-only	Battery disconnect alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF batteryDisconnectTrap	1.3.6.1.4.1.18642.0.2			Battery disconnect has operated.
NTF batteryDisconnectTrapClear	1.3.6.1.4.1.18642.0.102			Battery disconnect alarm has been cleared.
INT batteryFloatCurrent	1.3.6.1.4.1.18642.1.1.1.61	INTEGER	read-write	Battery float current. Return value is XXX representing XXX amps.
STR batteryFloatCurrentPresets	1.3.6.1.4.1.18642.1.2.3.36	DisplayString	read-only	Battery float current factory settings. Return value is XXX amps min, XXX amps max.
NTF batteryFloatCurrentTrap	1.3.6.1.4.1.18642.0.7			Battery float current has exceeded preset value. Return value: Battery float current alarm XXXX amps.
NTF batteryFloatCurrentTrapClear	1.3.6.1.4.1.18642.0.107			Battery float current alarm has been cleared.
INT batteryResistanceAlarmStatus	1.3.6.1.4.1.18642.1.2.4.15	INTEGER	read-only	Battery resistance alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT batteryResistanceChange	1.3.6.1.4.1.18642.1.2.2.5	INTEGER	read-only	Percent change from last battery resistance reading. Return value is XXX representing XXX %. Valid ranges are 001 to 999 %.
INT batteryResistancePercentChange	1.3.6.1.4.1.18642.1.1.1.58	INTEGER	read-write	Resistance percentange change that when reached will cause an alarm. Return value is XXX representing XXX %.
STR batteryResistancePresets	1.3.6.1.4.1.18642.1.2.3.39	DisplayString	read-only	Battery resistance percent change factory setting range. Return value is XXX % min, XXX % max.
INT batteryResistanceReading	1.3.6.1.4.1.18642.1.2.2.4	INTEGER	read-only	Last battery resistance reading. Return value is XXXXX representing X.XXXX ohms. Valid ranges are 0.0000 to 5.0000 ohms.
INT batteryResistanceReference	1.3.6.1.4.1.18642.1.2.2.3	INTEGER	read-only	Initial battery resistance. Return value is XXXXX representing X.XXXX ohms. Valid ranges are 0.0000 to 5.0000 ohms.
INT batteryResistanceTestInterval	1.3.6.1.4.1.18642.1.1.1.59	INTEGER	read-write	Battery resistance test interval. Return value is XX representing XX weeks.
NTF batteryResistanceTrap	1.3.6.1.4.1.18642.0.18			Battery resistance has increased by a programmed percentage. Return value: Battery resistance alarm X.XXXX ohms, XXX %.
NTF batteryResistanceTrapClear	1.3.6.1.4.1.18642.0.118			Battery resistance alarm has been cleared.
INT batteryTemperature	1.3.6.1.4.1.18642.1.2.2.2	INTEGER	read-only	Battery temperature. Return value is XX representing XX ?C. Valid ranges are -40 to 99 ?C.
NTF batteryTestAbort1Trap	1.3.6.1.4.1.18642.0.19			Battery failure abort 1 has occured during battery resistance test. Return value: Battery test failure: Abort 1.
NTF batteryTestAbort1TrapClear	1.3.6.1.4.1.18642.0.119			Battery test abort 1 alarm has been cleared.
NTF batteryTestAbort2Trap	1.3.6.1.4.1.18642.0.20			Battery failure abort 2 has occured during battery resistance test. Return value: Battery test failure: Abort 2.
NTF batteryTestAbort2TrapClear	1.3.6.1.4.1.18642.0.120			Battery test abort 2 alarm has been cleared.
NTF batteryTestAbort3Trap	1.3.6.1.4.1.18642.0.21			Battery failure abort 3 has occured during battery resistance test. Return value: Battery test failure: Abort 3.
NTF batteryTestAbort3TrapClear	1.3.6.1.4.1.18642.0.121			Battery test abort 3 alarm has been cleared.
INT batteryTestAbortCondition1AlarmStatus	1.3.6.1.4.1.18642.1.2.4.17	INTEGER	read-only	Battery test abort condition 1 alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT batteryTestAbortCondition2AlarmStatus	1.3.6.1.4.1.18642.1.2.4.18	INTEGER	read-only	Battery test abort condition 2 alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT batteryTestAbortCondition3AlarmStatus	1.3.6.1.4.1.18642.1.2.4.19	INTEGER	read-only	Battery test abort condition 3 alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT batteryTestFault	1.3.6.1.4.1.18642.1.2.2.12	INTEGER	read-only	Battery failure has occured during battery restistance test. Return value: 1 = Abort 1, 2 = Abort 2, 3 = Abort 3, 4 = None.
STR batteryTestIntervalPresets	1.3.6.1.4.1.18642.1.2.3.40	DisplayString	read-only	Battery resistance test interval factory setting range. Return value is XX weeks min, XX weeks max.
INT breakerAlarmStatus	1.3.6.1.4.1.18642.1.2.4.4	INTEGER	read-only	Breaker alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF breakerTrap	1.3.6.1.4.1.18642.0.0			Breaker has tripped.
NTF breakerTrapClear	1.3.6.1.4.1.18642.0.100			Breaker alarm has been cleared.
ccpower	1.3.6.1.4.1.18642
dcSystem	1.3.6.1.4.1.18642.1
digitalSensorAlarmClears	1.3.6.1.4.1.18642.1.2.7
digitalSensorAlarms	1.3.6.1.4.1.18642.1.2.5
STR disconnect1LoadShedFridayOff	1.3.6.1.4.1.18642.1.1.1.12	DisplayString	read-write	Time on Friday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect1LoadShedFridayPresets	1.3.6.1.4.1.18642.1.2.3.11	DisplayString	read-only	Disconnect 1 load shed Friday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect1LoadShedMondayOff	1.3.6.1.4.1.18642.1.1.1.8	DisplayString	read-write	Time on Monday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect1LoadShedMondayPresets	1.3.6.1.4.1.18642.1.2.3.7	DisplayString	read-only	Disconnect 1 load shed Monday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect1LoadShedSaturdayOff	1.3.6.1.4.1.18642.1.1.1.13	DisplayString	read-write	Time on Saturday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect1LoadShedSaturdayPresets	1.3.6.1.4.1.18642.1.2.3.12	DisplayString	read-only	Disconnect 1 load shed Saturday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect1LoadShedSundayOff	1.3.6.1.4.1.18642.1.1.1.7	DisplayString	read-write	Time on Sunday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect1LoadShedSundayPresets	1.3.6.1.4.1.18642.1.2.3.6	DisplayString	read-only	Disconnect 1 load shed Sunday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect1LoadShedThursdayOff	1.3.6.1.4.1.18642.1.1.1.11	DisplayString	read-write	Time on Thursday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect1LoadShedThursdayPresets	1.3.6.1.4.1.18642.1.2.3.10	DisplayString	read-only	Disconnect 1 load shed Thursday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect1LoadShedTuesdayOff	1.3.6.1.4.1.18642.1.1.1.9	DisplayString	read-write	Time on Tuesday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect1LoadShedTuesdayPresets	1.3.6.1.4.1.18642.1.2.3.8	DisplayString	read-only	Disconnect 1 load shed Tuesday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect1LoadShedWednesdayOff	1.3.6.1.4.1.18642.1.1.1.10	DisplayString	read-write	Time on Wednesday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect1LoadShedWednesdayPresets	1.3.6.1.4.1.18642.1.2.3.9	DisplayString	read-only	Disconnect 1 load shed Wednesday time settings. Return value is XX:Xx off, XX:XX on.
INT disconnect1Temperature	1.3.6.1.4.1.18642.1.1.1.6	INTEGER	read-write	Temperature which when exceeded will cause a specific load to disconnect. Return value is XX representing XX ?C.
STR disconnect1TemperaturePreset	1.3.6.1.4.1.18642.1.2.3.5	DisplayString	read-only	Disconnect temperature 1 factory setting. Return value is XX ?C.
INT disconnect1Voltage	1.3.6.1.4.1.18642.1.1.1.5	INTEGER	read-write	Voltage which when exceeded will cause a specific load to disconnect. Return value is XXX representing XX.X volts.
STR disconnect1VoltagePresets	1.3.6.1.4.1.18642.1.2.3.4	DisplayString	read-only	Disconnect voltage 1 factory setting range. Return value is XX.X volts min, XX.X volts max.
STR disconnect2LoadShedFridayOff	1.3.6.1.4.1.18642.1.1.1.21	DisplayString	read-write	Time on Friday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect2LoadShedFridayPresets	1.3.6.1.4.1.18642.1.2.3.21	DisplayString	read-only	Disconnect 2 load shed Friday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect2LoadShedMondayOff	1.3.6.1.4.1.18642.1.1.1.17	DisplayString	read-write	Time on Monday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect2LoadShedMondayPresets	1.3.6.1.4.1.18642.1.2.3.17	DisplayString	read-only	Disconnect 2 load shed Monday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect2LoadShedSaturdayOff	1.3.6.1.4.1.18642.1.1.1.22	DisplayString	read-write	Time on Saturday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect2LoadShedSaturdayPresets	1.3.6.1.4.1.18642.1.2.3.22	DisplayString	read-only	Disconnect 2 load shed Saturday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect2LoadShedSundayOff	1.3.6.1.4.1.18642.1.1.1.16	DisplayString	read-write	Time on Sunday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect2LoadShedSundayPresets	1.3.6.1.4.1.18642.1.2.3.16	DisplayString	read-only	Disconnect 2 load shed Sunday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect2LoadShedThursdayOff	1.3.6.1.4.1.18642.1.1.1.20	DisplayString	read-write	Time on Thursday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect2LoadShedThursdayPresets	1.3.6.1.4.1.18642.1.2.3.20	DisplayString	read-only	Disconnect 2 load shed Thursday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect2LoadShedTuesdayOff	1.3.6.1.4.1.18642.1.1.1.18	DisplayString	read-write	Time on Tuesday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect2LoadShedTuesdayPresets	1.3.6.1.4.1.18642.1.2.3.18	DisplayString	read-only	Disconnect 2 load shed Tuesday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect2LoadShedWednesdayOff	1.3.6.1.4.1.18642.1.1.1.19	DisplayString	read-write	Time on Wednesday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect2LoadShedWednesdayPresets	1.3.6.1.4.1.18642.1.2.3.19	DisplayString	read-only	Disconnect 2 load shed Wednesday time settings. Return value is XX:Xx off, XX:XX on.
INT disconnect2Temperature	1.3.6.1.4.1.18642.1.1.1.15	INTEGER	read-write	Temperature which when exceeded will cause a specific load to disconnect. Return value is XX representing XX ?C.
STR disconnect2TemperaturePreset	1.3.6.1.4.1.18642.1.2.3.15	DisplayString	read-only	Disconnect temperature 2 factory setting. Return value is XX ?C.
INT disconnect2Voltage	1.3.6.1.4.1.18642.1.1.1.14	INTEGER	read-write	Voltage which when exceeded will cause a specific load to disconnect. Return value is XXX representing XX.X volts.
STR disconnect2VoltagePresets	1.3.6.1.4.1.18642.1.2.3.14	DisplayString	read-only	Disconnect voltage 2 factory setting range. Return value is XX.X volts min, XX.X volts max.
STR disconnect3LoadShedFridayOff	1.3.6.1.4.1.18642.1.1.1.30	DisplayString	read-write	Time on Friday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect3LoadShedFridayPresets	1.3.6.1.4.1.18642.1.2.3.31	DisplayString	read-only	Disconnect 3 load shed Friday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect3LoadShedMondayOff	1.3.6.1.4.1.18642.1.1.1.26	DisplayString	read-write	Time on Monday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect3LoadShedMondayPresets	1.3.6.1.4.1.18642.1.2.3.27	DisplayString	read-only	Disconnect 3 load shed Monday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect3LoadShedSaturdayOff	1.3.6.1.4.1.18642.1.1.1.31	DisplayString	read-write	Time on Saturday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect3LoadShedSaturdayPresets	1.3.6.1.4.1.18642.1.2.3.32	DisplayString	read-only	Disconnect 3 load shed Saturday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect3LoadShedSundayOff	1.3.6.1.4.1.18642.1.1.1.25	DisplayString	read-write	Time on Sunday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect3LoadShedSundayPresets	1.3.6.1.4.1.18642.1.2.3.26	DisplayString	read-only	Disconnect 3 load shed Sunday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect3LoadShedThursdayOff	1.3.6.1.4.1.18642.1.1.1.29	DisplayString	read-write	Time on Thursday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect3LoadShedThursdayPresets	1.3.6.1.4.1.18642.1.2.3.30	DisplayString	read-only	Disconnect 3 load shed Thursday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect3LoadShedTuesdayOff	1.3.6.1.4.1.18642.1.1.1.27	DisplayString	read-write	Time on Tuesday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect3LoadShedTuesdayPresets	1.3.6.1.4.1.18642.1.2.3.28	DisplayString	read-only	Disconnect 3 load shed Tuesday time settings. Return value is XX:Xx off, XX:XX on.
STR disconnect3LoadShedWednesdayOff	1.3.6.1.4.1.18642.1.1.1.28	DisplayString	read-write	Time on Wednesday which when reached will cause a specific load to disconnect. Return value is XX:XX representing HH:MM.
STR disconnect3LoadShedWednesdayPresets	1.3.6.1.4.1.18642.1.2.3.29	DisplayString	read-only	Disconnect 3 load shed Wednesday time settings. Return value is XX:Xx off, XX:XX on.
INT disconnect3Temperature	1.3.6.1.4.1.18642.1.1.1.24	INTEGER	read-write	Temperature which when exceeded will cause a specific load to disconnect. Return value is XX representing XX ?C.
STR disconnect3TemperaturePreset	1.3.6.1.4.1.18642.1.2.3.25	DisplayString	read-only	Disconnect temperature 3 factory setting. Return value is XX ?C.
INT disconnect3Voltage	1.3.6.1.4.1.18642.1.1.1.23	INTEGER	read-write	Voltage which when exceeded will cause a specific load to disconnect. Return value is XXX representing XX.X volts.
STR disconnect3VoltagePresets	1.3.6.1.4.1.18642.1.2.3.24	DisplayString	read-only	Disconnect voltage 3 factory setting range. Return value is XX.X volts min, XX.X volts max.
INT equalizeTime	1.3.6.1.4.1.18642.1.1.1.56	INTEGER	read-write	Number of hours the equalize voltage is to be applied. Return value is XXX representing XX.X hours.
STR equalizeTimePresets	1.3.6.1.4.1.18642.1.2.3.37	DisplayString	read-only	Equalize time factory setting range. Return value is 00.0 hours min, XX.X hours max.
INT equalizeVoltage	1.3.6.1.4.1.18642.1.1.1.57	INTEGER	read-write	Equalize voltage to be applied. Return value is XXX representing XX.X volts.
STR equalizeVoltagePresets	1.3.6.1.4.1.18642.1.2.3.38	DisplayString	read-only	Equalize voltage factory setting range. Return value is XX.X volts min, XX.X volts max.
factorySettings	1.3.6.1.4.1.18642.1.2.3
INT fanFailureAlarmStatus	1.3.6.1.4.1.18642.1.2.4.6	INTEGER	read-only	Fan failure alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF fanFailureTrap	1.3.6.1.4.1.18642.0.15			Rectifier fan has failed. Return value: Fan failure.
NTF fanFailureTrapClear	1.3.6.1.4.1.18642.0.115			Fan failure alarm has been cleared.
INT floatVoltage	1.3.6.1.4.1.18642.1.1.1.1	INTEGER	read-write	Rectifier DC Output Voltage. Return value is XXX representing XX.X volts.
STR floatVoltagePresets	1.3.6.1.4.1.18642.1.2.3.1	DisplayString	read-only	Float voltage factory setting range. Return value is XX.X volts min, XX.X volts max.
INT fuseAlarmStatus	1.3.6.1.4.1.18642.1.2.4.21	INTEGER	read-only	Fuse alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF fuseTrap	1.3.6.1.4.1.18642.0.1			Fuse has opened.
NTF fuseTrapClear	1.3.6.1.4.1.18642.0.101			Fuse alarm has been cleared.
INT highVoltageAlarm	1.3.6.1.4.1.18642.1.1.1.3	INTEGER	read-write	Voltage which when exceeded will cause an alarm. Return value is XXX representing XX.X volts.
STR highVoltageAlarmPresets	1.3.6.1.4.1.18642.1.2.3.2	DisplayString	read-only	High voltage alarm factory setting range. Return value is XX.X volts min, XX.X volts max.
INT highVoltageAlarmStatus	1.3.6.1.4.1.18642.1.2.4.1	INTEGER	read-only	High voltage alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF highVoltageTrap	1.3.6.1.4.1.18642.0.4			Float voltage has exceeded preset value. Return value: High voltage alarm XX.X volts.
NTF highVoltageTrapClear	1.3.6.1.4.1.18642.0.104			High voltage alarm has been cleared.
NTF loadDisconnect1TemperatureTrap	1.3.6.1.4.1.18642.0.11			Load disconnect 1 temperature has exceeded preset value. Return value: Load disconnect 1 temperature alarm XX ?C.
NTF loadDisconnect1TemperatureTrapClear	1.3.6.1.4.1.18642.0.111			Load disconnect 1 temperature alarm has been cleared.
NTF loadDisconnect1VoltageTrap	1.3.6.1.4.1.18642.0.8			Load disconnect 1 voltage has dropped below preset value. Return value: Load disconnect 1 voltage XX.X volts.
NTF loadDisconnect1VoltageTrapClear	1.3.6.1.4.1.18642.0.108			Load disconnect 1 voltage alarm has been cleared.
NTF loadDisconnect2TemperatureTrap	1.3.6.1.4.1.18642.0.12			Load disconnect 2 temperature has exceeded preset value. Return value: Load disconnect 2 temperature alarm XX ?C.
NTF loadDisconnect2TemperatureTrapClear	1.3.6.1.4.1.18642.0.112			Load disconnect 2 temperature alarm has been cleared.
NTF loadDisconnect2VoltageTrap	1.3.6.1.4.1.18642.0.9			Load disconnect 2 voltage has dropped below preset value. Return value: Load disconnect 2 voltage XX.X volts.
NTF loadDisconnect2VoltageTrapClear	1.3.6.1.4.1.18642.0.109			Load disconnect 2 voltage alarm has been cleared.
NTF loadDisconnect3TemperatureTrap	1.3.6.1.4.1.18642.0.13			Load disconnect 3 temperature has exceeded preset value. Return value: Load disconnect 3 temperature alarm XX ?C.
NTF loadDisconnect3TemperatureTrapClear	1.3.6.1.4.1.18642.0.113			Load disconnect 3 temperature alarm has been cleared.
NTF loadDisconnect3VoltageTrap	1.3.6.1.4.1.18642.0.10			Load disconnect 3 voltage has dropped below preset value. Return value: Load disconnect 3 voltage XX.X volts.
NTF loadDisconnect3VoltageTrapClear	1.3.6.1.4.1.18642.0.110			Load disconnect 3 voltage alarm has been cleared.
NTF loadOverCurrentTrap	1.3.6.1.4.1.18642.0.6			Load current has exceeded preset value. Return value: Load over current alarm XXXX amps.
NTF loadOverCurrentTrapClear	1.3.6.1.4.1.18642.0.106			Load over current alarm has been cleared.
INT loadShedTimeControl	1.3.6.1.4.1.18642.1.1.1.60	INTEGER	read-write	Load shed time control enabled/disabled status. Return value: 1 = time control enabled, 2 = time control disabled.
INT lowVoltageAlarm	1.3.6.1.4.1.18642.1.1.1.4	INTEGER	read-write	Voltage which when exceeded will cause an alarm. Return value is XXX representing XX.X volts.
STR lowVoltageAlarmPresets	1.3.6.1.4.1.18642.1.2.3.3	DisplayString	read-only	Low voltage alarm factory setting range. Return value is XX.X volts min, XX.X volts max.
INT lowVoltageAlarmStatus	1.3.6.1.4.1.18642.1.2.4.2	INTEGER	read-only	Low voltage alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT lowVoltageDisconnect1TemperatureAlarmStatus	1.3.6.1.4.1.18642.1.2.4.9	INTEGER	read-only	Low voltage disconnect 1 high temperature alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT lowVoltageDisconnect1VoltageAlarmStatus	1.3.6.1.4.1.18642.1.2.4.12	INTEGER	read-only	Low voltage disconnect 1 low voltage alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT lowVoltageDisconnect2TemperatureAlarmStatus	1.3.6.1.4.1.18642.1.2.4.10	INTEGER	read-only	Low voltage disconnect 2 high temperature alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT lowVoltageDisconnect2VoltageAlarmStatus	1.3.6.1.4.1.18642.1.2.4.13	INTEGER	read-only	Low voltage disconnect 2 low voltage alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT lowVoltageDisconnect3TemperatureAlarmStatus	1.3.6.1.4.1.18642.1.2.4.11	INTEGER	read-only	Low voltage disconnect 3 high temperature alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT lowVoltageDisconnect3VoltageAlarmStatus	1.3.6.1.4.1.18642.1.2.4.14	INTEGER	read-only	Low voltage disconnect 3 low voltage alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF lowVoltageTrap	1.3.6.1.4.1.18642.0.5			Float voltage is below preset value. Return value: Low voltage alarm XX.X volts.
NTF lowVoltageTrapClear	1.3.6.1.4.1.18642.0.105			Low voltage alarm has been cleared.
INT majorAlarmStatus	1.3.6.1.4.1.18642.1.2.4.8	INTEGER	read-only	Major alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF majorFailureTrap	1.3.6.1.4.1.18642.0.17			Multiple failures of AC, rectififers, fans or a programmed alarm. Return value: Multiple AC, fan, rectifier or optional alarm failures has occurred.
NTF majorFailureTrapClear	1.3.6.1.4.1.18642.0.117			Major failure alarm has been cleared.
STR maximumCurrentPreset	1.3.6.1.4.1.18642.1.2.3.35	DisplayString	read-only	Maximum current factory setting. Return value is XXXX amps.
INT overloadAlarmStatus	1.3.6.1.4.1.18642.1.2.4.3	INTEGER	read-only	Overload alarm status. Return value 1 = alarm inactive, 2 = alarm active.
INT overloadCurrent	1.3.6.1.4.1.18642.1.1.1.2	INTEGER	read-write	Current which when exceeded will cause an alarm. Return value is XXXX representing XXXX amps.
STR overloadCurrentPresets	1.3.6.1.4.1.18642.1.2.3.34	DisplayString	read-only	Overload current factory setting range. Return value is XXXX amps min, XXXX amps max.
NTF programmableTrap	1.3.6.1.4.1.18642.0.3			Programmable alarm has occurred.
NTF programmableTrapClear	1.3.6.1.4.1.18642.0.103			Programmable alarm has been cleared.
readOnlyObjects	1.3.6.1.4.1.18642.1.2
readWriteObjects	1.3.6.1.4.1.18642.1.1
STR reconnect1LoadShedFridayOn	1.3.6.1.4.1.18642.1.1.1.38	DisplayString	read-write	Time on Friday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect1LoadShedMondayOn	1.3.6.1.4.1.18642.1.1.1.34	DisplayString	read-write	Time on Monday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect1LoadShedSaturdayOn	1.3.6.1.4.1.18642.1.1.1.39	DisplayString	read-write	Time on Saturday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect1LoadShedSundayOn	1.3.6.1.4.1.18642.1.1.1.33	DisplayString	read-write	Time which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect1LoadShedThursdayOn	1.3.6.1.4.1.18642.1.1.1.37	DisplayString	read-write	Time on Thursday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect1LoadShedTuesdayOn	1.3.6.1.4.1.18642.1.1.1.35	DisplayString	read-write	Time on Tuesday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect1LoadShedWednesdayOn	1.3.6.1.4.1.18642.1.1.1.36	DisplayString	read-write	Time on Wednesday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
INT reconnect1Voltage	1.3.6.1.4.1.18642.1.1.1.32	INTEGER	read-write	Voltage which when reached will cause a specific load to reconnect. Return value is XXX representing XX.X volts.
STR reconnect2LoadShedFridayOn	1.3.6.1.4.1.18642.1.1.1.46	DisplayString	read-write	Time on Friday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect2LoadShedMondayOn	1.3.6.1.4.1.18642.1.1.1.42	DisplayString	read-write	Time on Monday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect2LoadShedSaturdayOn	1.3.6.1.4.1.18642.1.1.1.47	DisplayString	read-write	Time on Saturday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect2LoadShedSundayOn	1.3.6.1.4.1.18642.1.1.1.41	DisplayString	read-write	Time on Sunday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect2LoadShedThursdayOn	1.3.6.1.4.1.18642.1.1.1.45	DisplayString	read-write	Time on Thursday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect2LoadShedTuesdayOn	1.3.6.1.4.1.18642.1.1.1.43	DisplayString	read-write	Time on Tuesday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect2LoadShedWednesdayOn	1.3.6.1.4.1.18642.1.1.1.44	DisplayString	read-write	Time on Wednesday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
INT reconnect2Voltage	1.3.6.1.4.1.18642.1.1.1.40	INTEGER	read-write	Voltage which when reached will cause a specific load to reconnect. Return value is XXX representing XX.X volts.
STR reconnect2VoltagePresets	1.3.6.1.4.1.18642.1.2.3.23	DisplayString	read-only	Reconnect voltage 2 factory setting range. Return value is XX.X volts min, XX.X volts max.
STR reconnect3LoadShedFridayOn	1.3.6.1.4.1.18642.1.1.1.54	DisplayString	read-write	Time on Friday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect3LoadShedMondayOn	1.3.6.1.4.1.18642.1.1.1.50	DisplayString	read-write	Time on Monday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect3LoadShedSaturdayOn	1.3.6.1.4.1.18642.1.1.1.55	DisplayString	read-write	Time on Saturday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect3LoadShedSundayOn	1.3.6.1.4.1.18642.1.1.1.49	DisplayString	read-write	Time on Sunday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect3LoadShedThursdayOn	1.3.6.1.4.1.18642.1.1.1.53	DisplayString	read-write	Time on Thursday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect3LoadShedTuesdayOn	1.3.6.1.4.1.18642.1.1.1.51	DisplayString	read-write	Time on Tuesday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
STR reconnect3LoadShedWednesdayOn	1.3.6.1.4.1.18642.1.1.1.52	DisplayString	read-write	Time on Wednesday which when reached will cause a specific load to reconnect. Return value is XX:XX representing HH:MM.
INT reconnect3Voltage	1.3.6.1.4.1.18642.1.1.1.48	INTEGER	read-write	Voltage which when reached will cause a specific load to reconnect. Return value is XXX representing XX.X volts.
STR reconnect3VoltagePresets	1.3.6.1.4.1.18642.1.2.3.33	DisplayString	read-only	Reconnect voltage 3 factory setting range. Return value is XX.X volts min, XX.X volts max.
STR reconnectVoltage1Presets	1.3.6.1.4.1.18642.1.2.3.13	DisplayString	read-only	Reconnect voltage 1 factory setting range. Return value is XX.X volts min, XX.X volts max.
INT rectifierFailureAlarmStatus	1.3.6.1.4.1.18642.1.2.4.7	INTEGER	read-only	Rectifier failure alarm status. Return value 1 = alarm inactive, 2 = alarm active.
NTF rectifierFailureTrap	1.3.6.1.4.1.18642.0.14			Rectifier failure. Return value: Rectifier failure.
NTF rectifierFailureTrapClear	1.3.6.1.4.1.18642.0.114			Rectififer failure alarm has been cleared.
INT rectifierFloatVoltage	1.3.6.1.4.1.18642.1.2.1.1	INTEGER	read-only	Rectifier float voltage. Return value is XXX representing XX.X volts. Valid ranges are 24.0 to 57.0 volts.
INT rectifierLoadCurrent	1.3.6.1.4.1.18642.1.2.1.2	INTEGER	read-only	Rectifier DC load current. Return value is XXXX representing XXXX amps. Valid ranges are 0000 to 5000 amps.
rectifiers	1.3.6.1.4.1.18642.1.2.1
settings	1.3.6.1.4.1.18642.1.1.1
systemAlarmClears	1.3.6.1.4.1.18642.1.2.8
systemAlarms	1.3.6.1.4.1.18642.1.2.6

RFC description

C&C Power DC system rectifier voltage, current, and alarm threshold management.

Start monitoring DC rectifier/power-plant equipment (enterprise OID 18642) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CCPOWER-MIB

What Is CCPOWER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description