AS-2000

All MIBs › AS-2000

Category: Vendor: 3Com

Description: Manages the 3Com SuperStack AS-2000 access switch for port configuration and status monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AS-2000?

AS-2000 is a private MIB (enterprise OID 1751) for a wireless Access Server platform, reporting WLAN interface configuration and SNMP access control. Its objects cover the system name and a WLAN-interface table recording network name, MAC address, medium reservation, transmit rate, operating frequency, AP density, closed-system flag, allowed transmit rates/regulatory domains/operating frequencies, capability options, profile code, and wireless-driver name/version, alongside SNMP read/read-write passwords, trap-host address/password, and a per-manager SNMP-access table. As a configuration MIB it lets an administrator confirm a WLAN interface's transmit rate and regulatory-domain settings and audit which SNMP managers have access. It is deployed on this vendor's AS-2000 wireless access server platform. Engineers can download the AS-2000 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AS-2000. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

AS-2000 wireless access server platform

Monitoring Examples

An administrator checks pliWlanIfRegulatoryDomainList to confirm an AS-2000 wireless interface is configured for the correct regulatory domain before deployment in a new country.

What Can Be Monitored

WLAN interface configuration
SNMP manager access control

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF accessServerAdminStateMadeDown	1.3.6.1.4.1.1751.2.4.3.15.4.0.5			This trap is sent when the Access Server Admin state is made 'down'
NTF accessServerAdminStateMadeUp	1.3.6.1.4.1.1751.2.4.3.15.4.0.4			This trap is sent when the Access Server Admin state is made 'up'
NTF accessServerAPMNotConfigured	1.3.6.1.4.1.1751.2.4.3.15.3.0.2			This trap is sent when the APM information is not configured in the Access Server.
NTF accessServerBootPFailed	1.3.6.1.4.1.1751.2.4.3.15.4.0.8			This trap is sent when the BootP protocol in the bootloader has failed.
accessServerConfigurationRelatedTraps	1.3.6.1.4.1.1751.2.4.3.15.3
NTF accessServerDHCPFailed	1.3.6.1.4.1.1751.2.4.3.15.4.0.9			This trap is sent when the DHCP in the application software has failed.
accessServerDiagnosticTraps	1.3.6.1.4.1.1751.2.4.3.15.4
NTF accessServerDNSIPNotConfigured	1.3.6.1.4.1.1751.2.4.3.15.3.0.7			This trap is sent when the DNS IP information is not configured in the Access Server.
NTF accessServerDuplicateIPAddressEncountered	1.3.6.1.4.1.1751.2.4.3.15.3.0.11			This trap is sent when the IP Address of the Access Server is also used by someother device in the network.
STR accessServerFailedTFTPFilename	1.3.6.1.4.1.1751.2.4.3.15.1.4	DisplayString	not-accessible	The filename configured to be retrieved/sent from/to the TFTP server for which the operation upload/download failed.
INT accessServerFailedTFTPOperation	1.3.6.1.4.1.1751.2.4.3.15.1.5	INTEGER	not-accessible	This variable used in conjunction with the different TFTP traps ( TFTPInitiated, TFTPFailed, TFTPCompleted)
IP accessServerFailedTFTPServerAddress	1.3.6.1.4.1.1751.2.4.3.15.1.3	IpAddress	not-accessible	The ip address configured as the TFTP server for which the operation upload/download failed.
NTF accessServerFlashCorrupted	1.3.6.1.4.1.1751.2.4.3.15.2.0.2			This trap is sent when the data in the FLASH is corrupted.
NTF accessServerFlashEmpty	1.3.6.1.4.1.1751.2.4.3.15.2.0.1			This trap is sent when the FLASH is empty.
accessServerFlashRelatedTraps	1.3.6.1.4.1.1751.2.4.3.15.2
STR accessServerGenericInformationMessage	1.3.6.1.4.1.1751.2.4.3.15.1.1	DisplayString	not-accessible	Any generic string information can be sent as this message.
NTF accessServerImageTooLarge	1.3.6.1.4.1.1751.2.4.3.15.5.0.3			This trap is sent when the image downloaded to the access server exceeds the size limitation of 5 MB.
accessServerImageTraps	1.3.6.1.4.1.1751.2.4.3.15.5
NTF accessServerInvalidKey	1.3.6.1.4.1.1751.2.4.3.15.3.0.1			This trap is sent when an invalid key is detected at the accessServer.
PHY accessServerMacAddress	1.3.6.1.4.1.1751.2.4.3.15.1.2	PhysAddress	not-accessible	The MAC address that is sent with the traps to identify which Access Server has the problem
NTF accessServerNBNSIPNotConfigured	1.3.6.1.4.1.1751.2.4.3.15.3.0.8			This trap is sent when the NBNS IP information is not configured in the Access Server.
NTF accessServerNonVxWorksImage	1.3.6.1.4.1.1751.2.4.3.15.5.0.2			This trap is sent when a non-VxWorks image is downloaded to the access server.
NTF accessServerRadiusAccountingNotConfigured	1.3.6.1.4.1.1751.2.4.3.15.3.0.10			This trap is sent when the radius accounting information is not configured in the Access Server.
NTF accessServerRadiusAuthenticationNotConfigured	1.3.6.1.4.1.1751.2.4.3.15.3.0.9			This trap is sent when the radius authentication information is not configured in the Access Server.
NTF accessServerRadiusNotConfigured	1.3.6.1.4.1.1751.2.4.3.15.3.0.6			This trap is sent when the radius information is not configured in the Access Server.
NTF accessServerRebootingNow	1.3.6.1.4.1.1751.2.4.3.15.4.0.6			This trap is sent when the Access Server is about to reboot.
STR accessServerSuspendedTaskName	1.3.6.1.4.1.1751.2.4.3.15.1.6	DisplayString	not-accessible	The task that was suspended, can be several tasks executed within the Access Server.
NTF accessServerTaskSuspended	1.3.6.1.4.1.1751.2.4.3.15.4.0.7			This trap is sent when a task has suspended in the Access Server.
NTF accessServerTFTPCompleted	1.3.6.1.4.1.1751.2.4.3.15.4.0.2			This trap is sent when a TFTP operation failure happens at the Access Server.
NTF accessServerTFTPFailure	1.3.6.1.4.1.1751.2.4.3.15.4.0.3			This trap is sent when a TFTP operation failure happens at the Access Server.
NTF accessServerTFTPInitiated	1.3.6.1.4.1.1751.2.4.3.15.4.0.1			This trap is sent when a TFTP operation happens at the Access Server.
accessServerTraps	1.3.6.1.4.1.1751.2.4.3.15
accessServerTrapVariables	1.3.6.1.4.1.1751.2.4.3.15.1
INT accessServerWirelessCard	1.3.6.1.4.1.1751.2.4.3.15.1.7	INTEGER	not-accessible	This trap variable is used to determine on which Wireless Card, PC Card A or PC Card B, a wireless TRAP has occured on.
NTF accessServerWLCFailure	1.3.6.1.4.1.1751.2.4.3.15.3.0.4			This trap is sent when an ORiNOCO PC Card is not present or there is a failure in the ORiNOCO PC card.
NTF accessServerWLCFirmwareDownloadFailure	1.3.6.1.4.1.1751.2.4.3.15.3.0.14			This trap is generated when a failure occurs during the firmware download process.
NTF accessServerWLCIncompatibleFirmware	1.3.6.1.4.1.1751.2.4.3.15.3.0.3			This trap is sent when an ORiNOCO PC Card plugged in the Access Server is not compatible with the firmware versions supported.
NTF accessServerWLCIncompatibleVendor	1.3.6.1.4.1.1751.2.4.3.15.3.0.13			This trap is generated when an incompatible wireless vendor card is inserted or present in the Access Server.
NTF accessServerWLCRemoval	1.3.6.1.4.1.1751.2.4.3.15.3.0.5			This trap is generated when the ORiNOCO PC Card is removed from the Access Server.
NTF accessServerWLCVoltageDiscrepancy	1.3.6.1.4.1.1751.2.4.3.15.3.0.12			This trap is sent when non 5volt card or 3.3 v card is inserted in the Access Server.
NTF accessServerZeroSizeImage	1.3.6.1.4.1.1751.2.4.3.15.5.0.1			This trap is sent when an image of size zero (0) is downloaded to the access server.
as2000	1.3.6.1.4.1.1751.2.4.3
as2000Product	1.3.6.1.4.1.1751.1.4.4
STR comment	1.3.6.1.4.1.1751.2.4.3.5.3.1.4	DisplayString	read-write	The comment for this entry, maybe the PC's owner.
IP endIPAddress	1.3.6.1.4.1.1751.2.4.3.5.15.1.3	IpAddress	read-write	This is the ending IP address of this range.
INT entryStatus	1.3.6.1.4.1.1751.2.4.3.5.3.1.5	INTEGER	read-write	Whether the entry is enabled or disabled. Used to delete the unwanted entries.
IP iPAddress	1.3.6.1.4.1.1751.2.4.3.5.3.1.3	IpAddress	read-write	The IP address corresponding to the MAC address.
STR iPComment	1.3.6.1.4.1.1751.2.4.3.5.15.1.6	DisplayString	read-write	The comment for this entry may be the PC owner.
lucent	1.3.6.1.4.1.1751
PHY mACAddress	1.3.6.1.4.1.1751.2.4.3.5.3.1.2	PhysAddress	read-write	This is the MAC address.
INT mACIPIndex	1.3.6.1.4.1.1751.2.4.3.5.3.1.1	INTEGER	read-only	This is the index for the mappping table.
INT managerIndex	1.3.6.1.4.1.1751.2.4.3.4.6.1.1	INTEGER	read-only	Management station identification number. Is the index for the table.
IP managerIPAddress	1.3.6.1.4.1.1751.2.4.3.4.6.1.2	IpAddress	read-write	IP address of the management station.
INT managerStatus	1.3.6.1.4.1.1751.2.4.3.4.6.1.4	INTEGER	read-write	Whether the manager is enabled or disabled. Used to delete the unwanted entries.
IP managerSubnetMask	1.3.6.1.4.1.1751.2.4.3.4.6.1.3	IpAddress	read-write	The IP subnet mask. Used to grant access to a complete subnet.
mibs	1.3.6.1.4.1.1751.2
INT oriLinkTestExplore	1.3.6.1.4.1.1751.2.4.3.13.4	INTEGER	read-write	When this parameter is set to 2, the access point will send out an explore request on all 802.11 interfaces and from the results build the Link Test table. This table is valid only while this parameter is 3.
INT oriLinkTestHisCurNoiseLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.20	INTEGER	read-only	The current noise level for the link test to the remote station or access point.
INT oriLinkTestHisCurSignalLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.19	INTEGER	read-only	The current signal level for the link test to the remote station or access point.
INT oriLinkTestHisCurSNR	1.3.6.1.4.1.1751.2.4.3.13.5.1.21	INTEGER	read-only	The current signal to noise ratio for the link test to the remote station or access point.
INT oriLinkTestHisHighFrameCount	1.3.6.1.4.1.1751.2.4.3.13.5.1.31	INTEGER	read-only	The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or access point.
INT oriLinkTestHisLowFrameCount	1.3.6.1.4.1.1751.2.4.3.13.5.1.28	INTEGER	read-only	The total number of frames sent at 1 Mbit/s speed during the link test to the remote station or access point.
INT oriLinkTestHisMaxNoiseLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.26	INTEGER	read-only	The maximum noise level during the link test to the remote station or access point.
INT oriLinkTestHisMaxSignalLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.25	INTEGER	read-only	The maximum signal level during the link test to the remote station or access point.
INT oriLinkTestHisMaxSNR	1.3.6.1.4.1.1751.2.4.3.13.5.1.27	INTEGER	read-only	The maximum signal to noise ratio during the link test to the remote station or access point.
INT oriLinkTestHisMediumFrameCount	1.3.6.1.4.1.1751.2.4.3.13.5.1.30	INTEGER	read-only	The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or access point.
INT oriLinkTestHisMinNoiseLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.23	INTEGER	read-only	The minimum noise level during the link test to the remote station or access point.
INT oriLinkTestHisMinSignalLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.22	INTEGER	read-only	The minimum signal level during the link test to the remote statio or access point.
INT oriLinkTestHisMinSNR	1.3.6.1.4.1.1751.2.4.3.13.5.1.24	INTEGER	read-only	The minimum signal to noise ratio during the link test to the remote station or access point.
INT oriLinkTestHisStandardFrameCount	1.3.6.1.4.1.1751.2.4.3.13.5.1.29	INTEGER	read-only	The total number of frames sent at 2 Mbit/s speed during the link test to the remote station or access point.
INT oriLinkTestInProgress	1.3.6.1.4.1.1751.2.4.3.13.5.1.2	INTEGER	read-write	When this parameter is set to 2 the access point will initiate a link test sequence with this station.
INT oriLinkTestInterface	1.3.6.1.4.1.1751.2.4.3.13.5.1.32	INTEGER	read-only	The PCMCIA Card Number to which the Client has sent the Explore Response Message.
INT oriLinkTestInterval	1.3.6.1.4.1.1751.2.4.3.13.3	INTEGER	read-write	This parameter indicates the interval (in millisec) between sending link test frames to a station. Default on 200 millisecond.
PHY oriLinkTestMACAddress	1.3.6.1.4.1.1751.2.4.3.13.5.1.4	PhysAddress	read-only	This variable represents the MAC address that will be mapped to the IP Address of the station.
INT oriLinkTestOurCurNoiseLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.7	INTEGER	read-only	The current noise level (in dB)for the link test to this station. This variable indicates the running average of the local noise level.
INT oriLinkTestOurCurSignalLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.6	INTEGER	read-only	The current signal level (in dB)for the link test from this station. This variable indicates the running average of the local signal level using the algorithm (3/4oldvalue + 1/4newvalue).
INT oriLinkTestOurCurSNR	1.3.6.1.4.1.1751.2.4.3.13.5.1.8	INTEGER	read-only	The current signal to noise ratio for the link test to this station.
INT oriLinkTestOurHighFrameCount	1.3.6.1.4.1.1751.2.4.3.13.5.1.18	INTEGER	read-only	The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 8 Mbit/s) speed during the link test to this station.
INT oriLinkTestOurLowFrameCount	1.3.6.1.4.1.1751.2.4.3.13.5.1.15	INTEGER	read-only	The total number of frames sent at 1 Mbit/s speed during the link test to this station.
INT oriLinkTestOurMaxNoiseLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.13	INTEGER	read-only	The maximum noise level during the link test to this station.
INT oriLinkTestOurMaxSignalLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.12	INTEGER	read-only	The maximum signal level during the link test to this station.
INT oriLinkTestOurMaxSNR	1.3.6.1.4.1.1751.2.4.3.13.5.1.14	INTEGER	read-only	The maximum signal to noise ratio during the link test to this station.
INT oriLinkTestOurMediumFrameCount	1.3.6.1.4.1.1751.2.4.3.13.5.1.17	INTEGER	read-only	The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to this station.
INT oriLinkTestOurMinNoiseLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.10	INTEGER	read-only	The minimum noise level during the link test to this station.
INT oriLinkTestOurMinSignalLevel	1.3.6.1.4.1.1751.2.4.3.13.5.1.9	INTEGER	read-only	The minimum signal level during the link test to this station.
INT oriLinkTestOurMinSNR	1.3.6.1.4.1.1751.2.4.3.13.5.1.11	INTEGER	read-only	The minimum signal to noise ratio during the link test to this station.
INT oriLinkTestOurStandardFrameCount	1.3.6.1.4.1.1751.2.4.3.13.5.1.16	INTEGER	read-only	The total number of frames sent at 2 Mbit/s speed during the link test to this station.
INT oriLinkTestRadioType	1.3.6.1.4.1.1751.2.4.3.13.5.1.33	INTEGER	read-only	The Wireless Standard eg. IEEE 802.11 or IEEE 802.11b used on the Radio.
STR oriLinkTestStationName	1.3.6.1.4.1.1751.2.4.3.13.5.1.3	DisplayString	read-only	This parameter identifies the name of the station whom which the link test is being performed.
INT oriLinkTestStationProfile	1.3.6.1.4.1.1751.2.4.3.13.5.1.5	INTEGER	read-only	This parameter represents the profile/capabilities for this station.
oriLinkTestTable	1.3.6.1.4.1.1751.2.4.3.13.5		not-accessible	This table contains the information for the stations currently associated with this access point.
oriLinkTestTableEntry	1.3.6.1.4.1.1751.2.4.3.13.5.1		not-accessible	This parameter represents the entry in the Remote Link Test table.This is described below.
INT oriLinkTestTableIndex	1.3.6.1.4.1.1751.2.4.3.13.5.1.1	INTEGER	read-only	This parameter represents a unique value for each stattion. The value for each station must remain constant at least from one explore to the next.
INT oriLinkTestTimeOut	1.3.6.1.4.1.1751.2.4.3.13.1	INTEGER	read-write	The value of this parameter determines the time that a link test will continue without any SNMP requests for a Link Test Table entry. When the time expires the Link Test Table is cleared.
orinoco	1.3.6.1.4.1.1751.2.4
orinocoAgent	1.3.6.1.4.1.1751.2.4.3.6
orinocoDiagnostics	1.3.6.1.4.1.1751.2.4.3.10
orinocoDriver	1.3.6.1.4.1.1751.2.4.3.3.4
orinocoIAPP	1.3.6.1.4.1.1751.2.4.3.11
orinocoInterface	1.3.6.1.4.1.1751.2.4.3.3
orinocoIPX	1.3.6.1.4.1.1751.2.4.3.12
orinocoLinkTest	1.3.6.1.4.1.1751.2.4.3.13
orinocoPHY	1.3.6.1.4.1.1751.2.4.3.3.2
orinocoPPPSetup	1.3.6.1.4.1.1751.2.4.3.5
orinocoProducts	1.3.6.1.4.1.1751.1.4
orinocoShimECPSetup	1.3.6.1.4.1.1751.2.4.3.8
orinocoSNMPSetup	1.3.6.1.4.1.1751.2.4.3.4
STR pliDriverName	1.3.6.1.4.1.1751.2.4.3.3.4.1	DisplayString	read-only	The driver name.
STR pliDriverVersion	1.3.6.1.4.1.1751.2.4.3.3.4.2	DisplayString	read-only	The driver's version number. This is a text string including the major and minor release number, and, optionally, the patch level: 'mm.nn.pp', where mm = major release number nn = point release number pp = optional patch number.
STR pliSystemName	1.3.6.1.4.1.1751.2.4.3.3.2.1	DisplayString	read-write	The sysName of the Access Server. This may be used for diagnostic purposes. This name will be the same as the sysName of the system group of MIB II
INT pliWlanIfAllowedOperatingFrequencies	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.11	INTEGER	read-only	This variables reflects the RF channels that the wavelan card supports.
INT pliWlanIfAllowedTransmitRates	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.9	INTEGER	read-only	This variables reflects the transmit rates that the wavelan card supports
INT pliWlanIfAPDensity	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.7	INTEGER	read-write	The AP density in the region.
INT pliWlanIfCapabilityOptions	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.12	INTEGER	read-only	The capabilities of the card. Indicates the support of features like WEP.
INT pliWlanIfClosedSystem	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.8	INTEGER	read-write	This flag identifies whether the Access Server will accept associate requests in this interface, from AS-Clients having a network name of 'ANY'. The Access Server should always be a closed station and such requests should always be rejected. This flag is provided for diagnostic purposes.
INT pliWlanIfIndex	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.1	INTEGER	read-only	A unique value for each interface. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
PHY pliWlanIfMACAddress	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.3	PhysAddress	read-only	The MAC address of the wavelan card present in this interface.
INT pliWlanIfMediumReservation	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.4	INTEGER	read-write	The medium reservation value. The range is 0 - 2347. Default is 2347 - means disabled. Medium reservation specifies the number of octets in a message above which a RTS/CTS handshake is performed.
STR pliWlanIfNetworkName	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.2	DisplayString	read-write	The network name of this wavelan interface
INT pliWlanIfOperatingFrequency	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.6	INTEGER	read-write	The RF channel that the Access Server is working on.
INT pliWlanIfProfileCode	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.13	INTEGER	read-only	The varible conprises of a vendor indication (Lucent or an OEM customer) and a capability indication (eg. bronze or gold).
OCT pliWlanIfRegulatoryDomainList	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.10	OCTET STRING	read-only	This variables reflects the regulatory domain the wavelan card belongs to.
INT pliWlanIfTransmitRate	1.3.6.1.4.1.1751.2.4.3.3.2.2.1.5	INTEGER	read-write	The transmit rate of this interface.
INT pPPIPIndex	1.3.6.1.4.1.1751.2.4.3.5.15.1.1	INTEGER	read-only	This is the index for the IP range table.
products	1.3.6.1.4.1.1751.1
INT psAdministrativeState	1.3.6.1.4.1.1751.2.4.3.6.6	INTEGER	read-write	The administrative state of the substation, can be Up or Down.
psASClientEntry	1.3.6.1.4.1.1751.2.4.3.12.6.1		not-accessible	An entry (conceptual row) representing a ASClient (IPX) connnected to the Access Server 2000 device.
CTR psASClientPacketsIn	1.3.6.1.4.1.1751.2.4.3.12.6.1.6	Counter	read-only	This object represents the number of packets (unicast and non-unicast)recieved for each AS Client or PPP virttual interface.
CTR psASClientPacketsOut	1.3.6.1.4.1.1751.2.4.3.12.6.1.7	Counter	read-only	This object represents the number of packets (unicast and non-unicast)sent for each AS Client or PPP virttual interface.
TIK psASClientSessionUpTime	1.3.6.1.4.1.1751.2.4.3.12.6.1.5	TimeTicks	read-only	This object represents the session up time for each AS Client or PPP virttual interface.
psASClientTable	1.3.6.1.4.1.1751.2.4.3.12.6		not-accessible	The (conceptual) table listing the ASClients (IPX) connected to the access server 2000 device.
STR psBroadcastMessage	1.3.6.1.4.1.1751.2.4.3.6.26	DisplayString	read-only	This parameter allows to set customized messages to be sent to all connected clients.
STR psBSPBootloaderVersion	1.3.6.1.4.1.1751.2.4.3.6.13	DisplayString	read-only	This object represents the BSP/Bootloader version that is currently stored in the access server device..
STR psContactEmail	1.3.6.1.4.1.1751.2.4.3.6.12	DisplayString	read-write	The textual identification of the contact person for this managed node, together with information on how to contact this person.
IP psDefaultGateway	1.3.6.1.4.1.1751.2.4.3.6.4	IpAddress	read-write	The default gateway for the Access Server.
STR psDeviceSerialNumber	1.3.6.1.4.1.1751.2.4.3.6.25	DisplayString	read-only	This parameter identifies the serial number of the system.
STR psHardwareVersionNumber	1.3.6.1.4.1.1751.2.4.3.6.28	DisplayString	read-only	This parameter identifies the Hardware version number of the system.
INT psIappAnnInterval	1.3.6.1.4.1.1751.2.4.3.11.16	INTEGER	read-write	This parameter represents interval in seconds for performing an IAPP announce operation by the device. The units for this parameter is seconds and default value should be 120 seconds.
CTR psIappAnnReqIn	1.3.6.1.4.1.1751.2.4.3.11.3	Counter	read-only	Number of ANNOUNCE.requests received.
CTR psIappAnnReqOut	1.3.6.1.4.1.1751.2.4.3.11.2	Counter	read-only	Number of ANNOUNCE.requests sent.
CTR psIappAnnRespIn	1.3.6.1.4.1.1751.2.4.3.11.5	Counter	read-only	Number of ANNOUNCE.responses received.
CTR psIappAnnRespOut	1.3.6.1.4.1.1751.2.4.3.11.4	Counter	read-only	Number of ANNOUNCE.responses sent.
INT psIappAnnRespTime	1.3.6.1.4.1.1751.2.4.3.11.17	INTEGER	read-only	This parameter indicates the amount of time in seconds the device waits to send an IAPP announce response after an announce request message is sent. This parameter is set to a default value of 2 seconds and is not configurable.
CTR psIappEndSessAckIn	1.3.6.1.4.1.1751.2.4.3.11.13	Counter	read-only	Number of IAPP End-PPP session acknowledgement PDUs received.
CTR psIappEndSessAckOut	1.3.6.1.4.1.1751.2.4.3.11.12	Counter	read-only	Number of IAPP End-PPP session acknowledgement PDUs sent.
CTR psIappEndSessIn	1.3.6.1.4.1.1751.2.4.3.11.11	Counter	read-only	Number of IAPP End-PPP session PDUs received.
CTR psIappEndSessOut	1.3.6.1.4.1.1751.2.4.3.11.10	Counter	read-only	Number of IAPP End-PPP session PDUs sent.
CTR psIappHandOvrReqIn	1.3.6.1.4.1.1751.2.4.3.11.7	Counter	read-only	Number of HANDOVER.request received.
CTR psIappHandOvrReqOut	1.3.6.1.4.1.1751.2.4.3.11.6	Counter	read-only	Number of HANDOVER.request sent.
CTR psIappHandOvrReqReSent	1.3.6.1.4.1.1751.2.4.3.11.15	Counter	read-only	Number of HANDOVER requests re-transmitted..
CTR psIappHandOvrRespIn	1.3.6.1.4.1.1751.2.4.3.11.9	Counter	read-only	Number of HANDOVER.responses received.
CTR psIappHandOvrRespOut	1.3.6.1.4.1.1751.2.4.3.11.8	Counter	read-only	Number of HANDOVER.responses sent.
INT psIappHandOvrTimeOut	1.3.6.1.4.1.1751.2.4.3.11.18	INTEGER	read-write	This parameter represents the time in milliseconds the device waits before it resends a handover response message. The default value for this parameter should be 512 milliseconds.
INT psIappMaxHandOvrRetries	1.3.6.1.4.1.1751.2.4.3.11.19	INTEGER	read-write	This parameter indicates the maximum amount of retransmission sent by the device for a handover request message. The default for this parameter should be 2.
CTR psIappPduDrops	1.3.6.1.4.1.1751.2.4.3.11.14	Counter	read-only	Number of IAPP PDUs dropped.
CTR psIappRoamingClients	1.3.6.1.4.1.1751.2.4.3.11.20	Counter	read-only	Number of roaming clients currently attached to the Access Server.
INT psIappStatus	1.3.6.1.4.1.1751.2.4.3.11.1	INTEGER	read-write	IAPP Status (whether IAPP feature should be enabled or diaabled)
IP psIPAddress	1.3.6.1.4.1.1751.2.4.3.6.2	IpAddress	read-write	The IP address to be assigned to the Access Server (to change from factory fitted IP address).
INT psIPAddressType	1.3.6.1.4.1.1751.2.4.3.6.5	INTEGER	read-write	This can be DHCP/BOOTP(dynamic) or assigned by User via CLI or AS Manager(static). The IP address of the Access Server will be assigned based on this.
PHY psIpxClientMAC	1.3.6.1.4.1.1751.2.4.3.12.6.1.3	PhysAddress	read-only	The Wireless MAC of this IPX Client.
OCT psIpxClientNetworkNumber	1.3.6.1.4.1.1751.2.4.3.12.6.1.2	OCTET STRING	read-only	The IPX Node Number assigned by the Novell Server to this IPX client.
INT psIpxClientStatus	1.3.6.1.4.1.1751.2.4.3.12.6.1.4	INTEGER	read-write	Flag to indicate whether the IPX Client is Active or Inactive. IPX Client status can also be disabled/enabled/deleted.
PHY psIpxDefaultRouterNodeNum	1.3.6.1.4.1.1751.2.4.3.12.2	PhysAddress	read-write	If the source IPX network number is not equal to the destination IPX Network number in the packet from wireless side to the wired side, then replace the destination Ether MAC addr with the value of this object (Default IPX router node number).
INT psIpxEthernetEncapsulationFormat	1.3.6.1.4.1.1751.2.4.3.12.5	INTEGER	read-write	Encapsulation type to be used for the IPX packets sent in wired side
INT psIpxStatus	1.3.6.1.4.1.1751.2.4.3.12.1	INTEGER	read-write	Which protocol is supported, i.e, IP or IPX or both IP and IPX.
CTR psIpxWiredToWlessBridged	1.3.6.1.4.1.1751.2.4.3.12.3	Counter	read-only	Number of packets bridged from wired side to wireless side.
CTR psIpxWlessToWiredBridged	1.3.6.1.4.1.1751.2.4.3.12.4	Counter	read-only	Number of packets bridged from wiredless side to wired side.
STR psPOSTVersionNumber	1.3.6.1.4.1.1751.2.4.3.6.27	DisplayString	read-only	This parameter identifies the POST version number of the system.
INT psPPPCHAPPriority	1.3.6.1.4.1.1751.2.4.3.5.10	INTEGER	read-write	This variable indicates the priority of CHAP among all authentictaion protocols enabled on the Access Server.
INT psPPPCHAPStatus	1.3.6.1.4.1.1751.2.4.3.5.9	INTEGER	read-write	This variable indicates the status of CHAP in the Access Server.
INT psPPPIPAddressAssignmentType	1.3.6.1.4.1.1751.2.4.3.5.1	INTEGER	read-write	This identifies whether the IP addresses assigned to the AS-Clients are obtained through APM (address pool manager), through DHCP or through the RADIUS server.
psPPPIPRangeTable	1.3.6.1.4.1.1751.2.4.3.5.15		not-accessible	This table contains the static mapping of MAC addresses to IP addresses.
psPPPIPRangeTableEntry	1.3.6.1.4.1.1751.2.4.3.5.15.1		not-accessible	The entry of the psPPPIPRangeTable. Described below.
INT psPPPKeepAliveInterval	1.3.6.1.4.1.1751.2.4.3.5.4	INTEGER	read-write	The keep alive interval to be notified to the PPP layer.
psPPPMACIPMappingTable	1.3.6.1.4.1.1751.2.4.3.5.3		not-accessible	This table contains the static mapping of MAC addresses to IP addresses.
psPPPMACIPMappingTableEntry	1.3.6.1.4.1.1751.2.4.3.5.3.1		not-accessible	The entry of the asPPPMACIPMappingTable Described below.
INT psPPPMaxNoOfUsers	1.3.6.1.4.1.1751.2.4.3.5.8	INTEGER	read-write	The maximum no of clients permitted to connect to this Access Server.
INT psPPPNoOfKeepAliveTimeouts	1.3.6.1.4.1.1751.2.4.3.5.5	INTEGER	read-write	The maximum number of timeouts before the session is torn down.
INT psPPPNoOfMACIPMappingEntries	1.3.6.1.4.1.1751.2.4.3.5.2	INTEGER	read-only	The number of static mapping entries.
INT psPPPPAPPriority	1.3.6.1.4.1.1751.2.4.3.5.12	INTEGER	read-write	This variable indicates the priority of PAP among all authentictaion protocols enabled on the Access Server.
INT psPPPPAPStatus	1.3.6.1.4.1.1751.2.4.3.5.11	INTEGER	read-write	This variable indicates the status of PAP in the Access Server.
IP psPPPPrimaryDNSIPAddress	1.3.6.1.4.1.1751.2.4.3.5.6	IpAddress	read-write	The IP address of the primary DNS server in the network.
IP psPPPPrimaryNBNSIPAddress	1.3.6.1.4.1.1751.2.4.3.5.13	IpAddress	read-write	The IP address of the Primary NBNS server in the network.
IP psPPPSecondaryDNSIPAddress	1.3.6.1.4.1.1751.2.4.3.5.7	IpAddress	read-write	The IP address of the secondary DNS server in the network.
IP psPPPSecondaryNBNSIPAddress	1.3.6.1.4.1.1751.2.4.3.5.14	IpAddress	read-write	The IP address of the Secondary NBNS server in the network.
INT psPPPSessionId	1.3.6.1.4.1.1751.2.4.3.12.6.1.1	INTEGER	read-only	The PPP Session ID assigned by the AS-2000 to this ASClient.
INT psPPPSessionIdleTimeOut	1.3.6.1.4.1.1751.2.4.3.5.16	INTEGER	read-write	The varible indicates the Session Idle time out.
INT psReboot	1.3.6.1.4.1.1751.2.4.3.6.10	INTEGER	read-write	This variable must be set to reboot the Access Server. The value is the number of seconds to wait to do a reboot.
INT psSecondsToAdminDown	1.3.6.1.4.1.1751.2.4.3.6.11	INTEGER	read-write	The count of seconds to go before the administrative state of the Access Server is made down.
INT psSerialBaudRate	1.3.6.1.4.1.1751.2.4.3.6.19	INTEGER	read-write	Serial interface baud rate. The default value is 9600
INT psSerialDataBits	1.3.6.1.4.1.1751.2.4.3.6.20	INTEGER	read-only	Serial interface data bits. The default value is 8
INT psSerialFlowControl	1.3.6.1.4.1.1751.2.4.3.6.23	INTEGER	read-write	Serial interface Flow control. The default value is None
INT psSerialParity	1.3.6.1.4.1.1751.2.4.3.6.21	INTEGER	read-only	Serial interface Parity check. The default value is None
INT psSerialStopBits	1.3.6.1.4.1.1751.2.4.3.6.22	INTEGER	read-only	Serial interface stop bits. The default value is 1
INT psShimECPRepeatResponseCount	1.3.6.1.4.1.1751.2.4.3.8.2	INTEGER	read-write	The number of time the transmitted response can be retransmitted.
INT psShimECPRetransmissionCount	1.3.6.1.4.1.1751.2.4.3.8.1	INTEGER	read-write	The number of retransmissions when responses are not received with the timeout period.
INT psShimECPRetransmissionTimeout	1.3.6.1.4.1.1751.2.4.3.8.3	INTEGER	read-write	The timeout interval for a response to be received.
psSNMPAccessTable	1.3.6.1.4.1.1751.2.4.3.4.6		not-accessible	The table containing the information about the managers authorised to manage this Access Server.
psSNMPAccessTableEntry	1.3.6.1.4.1.1751.2.4.3.4.6.1		not-accessible	The entry in the SNMP access table. Described next.
CTR psSNMPInBadManagers	1.3.6.1.4.1.1751.2.4.3.4.7	Counter	read-only	The no of attempts to manage this Access Server by unauthorised managers.
INT psSNMPManagerCount	1.3.6.1.4.1.1751.2.4.3.4.5	INTEGER	read-only	The number of management stations that have been authorised to manage this Access Server.
STR psSNMPReadPassword	1.3.6.1.4.1.1751.2.4.3.4.1	DisplayString	write-only	The password for reading object values from the agent.
STR psSNMPReadWritePassword	1.3.6.1.4.1.1751.2.4.3.4.2	DisplayString	write-only	The password for reading and modifying object values from the agent.
IP psSNMPTrapHostIPAddress	1.3.6.1.4.1.1751.2.4.3.4.3	IpAddress	read-write	The IP address of the host to which traps should be sent.
STR psSNMPTrapHostPassword	1.3.6.1.4.1.1751.2.4.3.4.4	DisplayString	read-write	The password sent with the trap to enable the management station to ignore unsolicited traps.
IP psSubnetMask	1.3.6.1.4.1.1751.2.4.3.6.3	IpAddress	read-write	The subnet mask of the Access Server.
INT psTelnetLoginTimeout	1.3.6.1.4.1.1751.2.4.3.6.18	INTEGER	read-write	Telnet login timeout in seconds. The default value is 30 seconds
STR psTelnetPassword	1.3.6.1.4.1.1751.2.4.3.6.15	DisplayString	write-only	Password to access Access Server from Telenet.
INT psTelnetPort	1.3.6.1.4.1.1751.2.4.3.6.16	INTEGER	read-write	The TCP/IP port for Access Server Telenet daemon.
INT psTelnetSesssions	1.3.6.1.4.1.1751.2.4.3.6.14	INTEGER	read-write	This object is used to enable or disable telnet access and to specify the number of active telnet sessions. When this object is set to 0, telnet access is disabled. When this object is set to something greater than 0, then it specifies the maximum number of active telnet sessions.
INT psTelnetTimeout	1.3.6.1.4.1.1751.2.4.3.6.17	INTEGER	read-write	Telnet inactivity timeout in minutes. The default value is 15 minutes
STR psTestSNMPReadWritePassword	1.3.6.1.4.1.1751.2.4.3.4.8	DisplayString	write-only	The password for reading and modifying object values from the agent can be verified by setting this.
STR psTFTPFilename	1.3.6.1.4.1.1751.2.4.3.6.8	DisplayString	read-write	The filename of the image in the TFTP server.
INT psTFTPFileType	1.3.6.1.4.1.1751.2.4.3.6.24	INTEGER	read-write	The type of the file to be uploaded or downloaded to/from the access server. The AllConfigFiles options shall upload or download all the configuration files supported.
IP psTFTPIPAddress	1.3.6.1.4.1.1751.2.4.3.6.7	IpAddress	read-write	The IP address of the TFTP server.
INT psTFTPOperation	1.3.6.1.4.1.1751.2.4.3.6.9	INTEGER	write-only	The operation to be done, can be upload or download.
STR psVersion	1.3.6.1.4.1.1751.2.4.3.6.1	DisplayString	read-only	The version of the Access Server software currently execuing. Would be text string including the major and minor release number, and, optionally, the patch level: 'mm.nn.pp', where mm = major release number nn = point release number pp = optional patch number.
psWlanIfEntry	1.3.6.1.4.1.1751.2.4.3.3.2.2.1		not-accessible	The entry in the wavelan interfac table. Described next.
psWlanIfTable	1.3.6.1.4.1.1751.2.4.3.3.2.2		not-accessible	The table contains the information about the wavelan interfaces present in the Access Server.
radius	1.3.6.1.4.1.1751.2.4.3.7
radiusClient	1.3.6.1.4.1.1751.2.4.3.7.2.1.1
CTR radiusClientAccessAccepts	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.8	Counter	read-only	The total number of RADIUS Access-Accept messages received since client start-up
CTR radiusClientAccessChallenges	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.9	Counter	read-only	The total number of RADIUS Access-Challenge messages received since client start-up
CTR radiusClientAccessRejects	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.12	Counter	read-only	The total number of RADIUS Access-Reject messages sent since client start-up
CTR radiusClientAccessRequests	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.6	Counter	read-only	The total number of RADIUS Access-Request messages sent since client start-up
CTR radiusClientAccessRetransmissions	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.7	Counter	read-only	The total number of RADIUS Access-Request messages retransmitted since client start-up
CTR radiusClientAccountingBadAuthenticators	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.17	Counter	read-only	The total number of RADIUS Accounting-Response messages which contained invalid authenticators received since client start-up
CTR radiusClientAccountingRequests	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.14	Counter	read-only	The total number of RADIUS Accounting-Request messages sent since client start-up
CTR radiusClientAccountingResponses	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.16	Counter	read-only	The total number of RADIUS Accounting-Response messages received since client start-up
CTR radiusClientAccountingRetransmissions	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.15	Counter	read-only	The total number of RADIUS Accounting-Request messages retransmitted since client start-up
CTR radiusClientAuthenticationBadAuthenticators	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.11	Counter	read-only	The total number of RADIUS Access-Response messages containing invalid authenticators received since client start-up
CTR radiusClientInvalidServerAddresses	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.1	Counter	read-only	The total number of RADIUS Access-Response messages received from unknown addresses since client start-up
CTR radiusClientMalformedAccessResponses	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.10	Counter	read-only	The total number of malformed RADIUS Access-Response messages received since client start-up
radiusClientMIB	1.3.6.1.4.1.1751.2.4.3.7.2
radiusClientMIBCompliances	1.3.6.1.4.1.1751.2.4.3.7.2.2.1
radiusClientMIBConformance	1.3.6.1.4.1.1751.2.4.3.7.2.2
radiusClientMIBGroups	1.3.6.1.4.1.1751.2.4.3.7.2.2.2
radiusClientMIBObjects	1.3.6.1.4.1.1751.2.4.3.7.2.1
CTR radiusClientTimeouts	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.13	Counter	read-only	The total number of timeouts since client startup
IP radiusServerAddress	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.3	IpAddress	read-write	The IP address of the RADIUS server referred to in this table entry.
INT radiusServerDestPortAcct	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.5	INTEGER	read-write	The Accounting port of the RADIUS Server.
INT radiusServerDestPortAuth	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.4	INTEGER	read-write	The Authentication port of the RADIUS Server.
INT radiusServerEnabled	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.19	INTEGER	read-write	Flag to tell whether the server is active or Inactive
radiusServerEntry	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1		not-accessible	An entry (conceptual row) representing a RADIUS server with which the client shares a secret.
INT radiusServerIndex	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.1	INTEGER	read-only	The RADIUS server with whom the client interacts.
INT radiusServerMaximumRetransmission	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.21	INTEGER	read-write	The allowed maximum no. of trials to be tried by a client to get response from the server for a request
INT radiusServerResponseTime	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.20	INTEGER	read-write	The maximum time within which the server has to respond for a request from the client
STR radiusServerSharedSecret	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.18	DisplayString	read-write	The secret string which is shared between Server and Client
radiusServerTable	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2		not-accessible	The (conceptual) table listing the RADIUS servers with which the client shares a secret.
INT radiusServerType	1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.2	INTEGER	read-only	The RADIUS server type (Authentication or Accounting or Both). For creating a server entry Server Type should be set
IP startIPAddress	1.3.6.1.4.1.1751.2.4.3.5.15.1.2	IpAddress	read-write	This is the staring IP address of this range.
INT status	1.3.6.1.4.1.1751.2.4.3.5.15.1.5	INTEGER	read-write	The status of the entry, whether to be used or not used. Setting this to delete will remove this entry.
INT width	1.3.6.1.4.1.1751.2.4.3.5.15.1.4	INTEGER	read-write	This is the withd of the range (no of addresses).

RFC description

Access Server 2000 management including IAPP, IPX, wavelan interface configuration, and console port management.

Start monitoring Lucent AS-2000 wireless access server platform (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AS-2000

What Is AS-2000?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description