A3COM-DVMRP-R1-MIB

All MIBs › A3COM-DVMRP-R1-MIB

Category: Routing Protocols, Vendor: 3Com

Description: Manages Distance Vector Multicast Routing Protocol (DVMRP) routing tables and interface statistics on 3Com devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-DVMRP-R1-MIB?

A3COM-DVMRP-R1-MIB is a vendor-specific SNMP module from 3Com covering the Distance Vector Multicast Routing Protocol (DVMRP) implementation on 3Com/H3C routing switches and brouters. It exposes multicast routing configuration and state such as prune timers, cache aging, boundary addresses, MOSPF policy interaction, and per-port and per-neighbor DVMRP tables. Rather than hardware sensors, this MIB is used to monitor the software/protocol status of the multicast routing process itself, letting an operator confirm that DVMRP neighbors, ports, and cache entries are active and updating on schedule. It is layered on the vendor's private brouterMIB tree and assumes the base IP multicast routing model, so it is typically read alongside standard IP-MIB and multicast MIBs rather than standalone. It is used in legacy 3Com/H3C enterprise campus and WAN routing deployments that still run DVMRP for IP multicast distribution, and administrators maintaining such gear can find an A3COM-DVMRP-R1-MIB download available to load into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-DVMRP-R1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

3Com/H3C multicast-capable routers and brouters

Monitoring Examples

An operator would poll a3ComDvmrpPortTable/a3ComDvmrpPortEntry to confirm which interfaces are DVMRP-enabled and check a3ComDvmrpNeighborTable to verify expected upstream/downstream neighbor adjacencies are still present. Watching a3ComDvmrpCacheTime and a3ComDvmrpUpdateTime against configured a3ComDvmrpPrune behavior can reveal a multicast forwarding cache that is aging out too quickly or a neighbor relationship that has silently dropped. The a3ComDvmrpBoundaryAddrTable is checked to ensure administrative multicast boundaries are correctly scoping traffic.

What Can Be Monitored

DVMRP neighbor adjacency status
multicast route cache aging
prune state per group
DVMRP-enabled port list
administrative multicast boundaries
MOSPF policy interaction

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress
enterprises

From RFC1213-MIB

PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
a3Com	1.3.6.1.4.1.43
a3ComDVMRP	1.3.6.1.4.1.43.2.28
a3ComDvmrpAggreExceptEntry	1.3.6.1.4.1.43.2.28.2.6.1		not-accessible	Each entry contains a range of subnets.
IP a3ComDvmrpAggreExceptIpAddr	1.3.6.1.4.1.43.2.28.2.6.1.1	IpAddress	read-write	This object specifies the IP subnet address.
INT a3ComDvmrpAggreExceptIpMask	1.3.6.1.4.1.43.2.28.2.6.1.2	INTEGER	read-write	The subnet mask of ccsIpDvmrpAggreExceptIpAddr. It is an integer value representing number of consecutive leading 1s. i.e. if the value is 1, then the subnet mask is 128.0.0.0, if the value is 8 then the subnet mask is 255.0.0.0.
ROW a3ComDvmrpAggreExceptStatus	1.3.6.1.4.1.43.2.28.2.6.1.3	RowStatus	read-write	This object is used to add and delete entries in this table. See the definition of RowStatus for detail.
a3ComDvmrpAggreExceptTable	1.3.6.1.4.1.43.2.28.2.6		not-accessible	The table contains list of subnets not to be aggregated.
a3ComDvmrpAggreRangeEntry	1.3.6.1.4.1.43.2.28.2.7.1		not-accessible	Each entry contains a range of routes.
IP a3ComDvmrpAggreRangeIpAddr	1.3.6.1.4.1.43.2.28.2.7.1.1	IpAddress	read-write	This object specifies the IP subnet address.
INT a3ComDvmrpAggreRangeIpMask	1.3.6.1.4.1.43.2.28.2.7.1.2	INTEGER	read-write	The subnet mask of ccsIpDvmrpAggreRangeIpAddr. It is an integer value representing number of consecutive leading 1s. i.e. if the value is 1, then the subnet mask is 128.0.0.0, if the value is 8 then the subnet mask is 255.0.0.0.
INT a3ComDvmrpAggreRangeMetric	1.3.6.1.4.1.43.2.28.2.7.1.3	INTEGER	read-write	This object specifies the cost to the above subnet. If set this object to value 0, the metric associated with the aggregate route to be advertised will pick up the best one among all the aggregated routes.
ROW a3ComDvmrpAggreRangeStatus	1.3.6.1.4.1.43.2.28.2.7.1.4	RowStatus	read-write	This object is used to add and delete entries in this table. See the definition of RowStatus for detail.
a3ComDvmrpAggreRangeTable	1.3.6.1.4.1.43.2.28.2.7		not-accessible	The table contains range of routes to be aggregated.
a3ComDvmrpBoundaryAddrEntry	1.3.6.1.4.1.43.2.28.2.2.1		not-accessible	Each entry contains a single or a range of multicast addresses to be scoped over a specific port or tunnel.
IP a3ComDvmrpBoundaryAddrIpAddr	1.3.6.1.4.1.43.2.28.2.2.1.2	IpAddress	read-only	This allows you to configure a single or a set of multicast addresses to be scoped that they do not get forwarded beyond a boundary router.
IP a3ComDvmrpBoundaryAddrMask	1.3.6.1.4.1.43.2.28.2.2.1.3	IpAddress	read-write	This is the subnet mask associated with a3ComDvmrpBoundaryIpAddr of this entry. If this is not specified, the value 255.255.255.255 is used.
INT a3ComDvmrpBoundaryAddrPort	1.3.6.1.4.1.43.2.28.2.2.1.1	INTEGER	read-only	The port or tunnel number to which this entry applies.
ROW a3ComDvmrpBoundaryAddrStatus	1.3.6.1.4.1.43.2.28.2.2.1.4	RowStatus	read-write	This object is used to add and delete entries in this table. See the definition of RowStatus for detail.
a3ComDvmrpBoundaryAddrTable	1.3.6.1.4.1.43.2.28.2.2		not-accessible	This table contains multicast addresses to be scoped for each port or tunnel.
INT a3ComDvmrpCacheTime	1.3.6.1.4.1.43.2.28.1.1	INTEGER	read-write	This object specifies the time in seconds a (source, group) entry is kept in the forwarding table. The entry can be kept within 5 minutes to 1 day.
a3ComDvmrpCConfig	1.3.6.1.4.1.43.2.28.2
a3ComDvmrpData	1.3.6.1.4.1.43.2.28.3
INT a3ComDvmrpDestGroupAction	1.3.6.1.4.1.43.2.28.2.8.1.3	INTEGER	read-write	This object specifies if this destination group needs to be forwarded to MOSPF domain. If set to 'accept (1)', the group is forwarded to MOSPF domain; if set to 'reject (2)' then the group is filtered out.
a3ComDvmrpDestGroupEntry	1.3.6.1.4.1.43.2.28.2.8.1		not-accessible	Each entry contains a destination group to be or not to be forwarded to MOSPF domain.
IP a3ComDvmrpDestGroupIpAddr	1.3.6.1.4.1.43.2.28.2.8.1.1	IpAddress	read-only	This object specifies the destination group IP address, the first byte in decimal must be in the range of 224 to 239.
INT a3ComDvmrpDestGroupIpMask	1.3.6.1.4.1.43.2.28.2.8.1.2	INTEGER	read-only	This is subnet mask associated with a3ComDvmrpDestGroupIpAddr. It is a number of contiguous leading 1s, i.e. if the value is 1, it indicates the subnet mask is 128.0.0.0, or if the value is 8 then the subnet mask is 255.0.0.0.
INT a3ComDvmrpDestGroupPolicy	1.3.6.1.4.1.43.2.28.1.5	INTEGER	read-write	This object is used to control data packets forward to MOSPF domain. If this object is set to destGroup(1), data packet will be checked with object a3ComDvmrpDestGroupTable, which function as a filter, before being forwarded to MOSPF domain. If this object is set to noDestGroup(2), data packet is forwarded to MOSPF domain without any checking.
ROW a3ComDvmrpDestGroupStatus	1.3.6.1.4.1.43.2.28.2.8.1.4	RowStatus	read-write	This object is used to add and delete entries in this table. See the definition of RowStatus for detail.
a3ComDvmrpDestGroupTable	1.3.6.1.4.1.43.2.28.2.8		not-accessible	The table contains destination groups to be or not to be forwarded to MOSPF domain. This table will take effect only if object a3ComDvmrpDestGroupPolicy is set to 'destGroup (1)'.
a3ComDvmrpForwardEntry	1.3.6.1.4.1.43.2.28.3.2.1		not-accessible	Each entry contains forwarding information for a specific (source, group) pair.
IP a3ComDvmrpForwardGroup	1.3.6.1.4.1.43.2.28.3.2.1.2	IpAddress	read-only	This object specifies the destination multicast group address of this (source, group) multicast distribution tree.
INT a3ComDvmrpForwardInPort	1.3.6.1.4.1.43.2.28.3.2.1.4	INTEGER	read-only	This object specifies the incoming port for the multicast datagrams from the source a3ComDvmrpForwardSource.
OCT a3ComDvmrpForwardOutPorts	1.3.6.1.4.1.43.2.28.3.2.1.5	OCTET STRING	read-only	This object specifies ports to which multicast datagrams belonging to this (source, group) pair to be forwarded. The value in each octet contains a bit maps of 8 ports, that the significant bit represents the lowest port and the least significant bit represent the highest port. The first octet represents ports 1 to 8, the next octet represents ports 9 to 16, ..., etc. If the bit value is set then the corresponding port will have multicast datagrams to be forwarded. The tunnel ports mapping is put in the next a3ComDvmrpForwardOutPortsTunnel object.
OCT a3ComDvmrpForwardOutPortsTunnel	1.3.6.1.4.1.43.2.28.3.2.1.6	OCTET STRING	read-only	This object is the same as a3ComDvmrpForwardOutPorts object but includes tunnel ports mapping only.
INT a3ComDvmrpForwardPruneSent	1.3.6.1.4.1.43.2.28.3.2.1.8	INTEGER	read-only	This object specifies if a Prune message has been sent to its upstream router. A prune message is sent when router wants to leave the multicast delivery tree associated with this (source, group) pair.
INT a3ComDvmrpForwardScoped	1.3.6.1.4.1.43.2.28.3.2.1.7	INTEGER	read-only	This object specifies if it is a boundary port. If the value of this object is yes(1), it means multicast traffic will not be forwarded on the scoped address, specified in 3ComDvmrpForwardGroup, on this port.
IP a3ComDvmrpForwardSource	1.3.6.1.4.1.43.2.28.3.2.1.1	IpAddress	read-only	This object specifies root's IP address of this (source, group) multicast distribution tree.
a3ComDvmrpForwardTable	1.3.6.1.4.1.43.2.28.3.2		not-accessible	This table contains information of each (source, group) pair.
INT a3ComDvmrpForwardTtl	1.3.6.1.4.1.43.2.28.3.2.1.3	INTEGER	read-only	This object specifies the time in seconds left for this (source, group) entry to stay in the forwarding table. When this value reaches 0, this (source, group) entry is deleted from the table.
INT a3ComDvmrpMospfAction	1.3.6.1.4.1.43.2.28.2.3.1.4	INTEGER	read-write	If this object is set to aggregate(1), then this source subnet, if learned from MOSPF, is advertised to DVMRP domain in aggregate form. If this object is set to individual(2), then this source subnet, if learned from MOSPF, is advertised to DVMRP domain as it is. Otherwise, the route will not be advertised if the object is set to reject(3).
a3ComDvmrpMospfEntry	1.3.6.1.4.1.43.2.28.2.3.1		not-accessible	Each entry contains a source subnet in MOSPF domain to be advertised or not to be advertised to the DVMRP domain.
IP a3ComDvmrpMospfIpAddr	1.3.6.1.4.1.43.2.28.2.3.1.1	IpAddress	read-only	Source subnet's IP address.
INT a3ComDvmrpMospfIpMask	1.3.6.1.4.1.43.2.28.2.3.1.2	INTEGER	read-only	This is subnet mask associated with a3ComDvmrpMospfIpAddr. It is a number of contiguous leading 1s, i.e. if the value is 1, it indicates the subnet mask is 128.0.0.0, or if the value is 8 then the subnet mask is 255.0.0.0.
INT a3ComDvmrpMospfMetric	1.3.6.1.4.1.43.2.28.2.3.1.3	INTEGER	read-write	The routing metric to this source subnet. It ranges from 1 to 31.
INT a3ComDvmrpMospfPolicy	1.3.6.1.4.1.43.2.28.1.4	INTEGER	read-write	If this object is set to mospf(1), the system will import the route source from MOSPF domain into DVMRP. The route source is controlled by the object a3ComDvmrpMospfTable
ROW a3ComDvmrpMospfStatus	1.3.6.1.4.1.43.2.28.2.3.1.5	RowStatus	read-write	This object is used to add and delete entries in this table. See the definition of RowStatus for detail.
a3ComDvmrpMospfTable	1.3.6.1.4.1.43.2.28.2.3		not-accessible	This table contains a list of source subnet in MOSPF domain.
a3ComDvmrpNbrRouterEntry	1.3.6.1.4.1.43.2.28.3.3.1		not-accessible	Each entry contains neighboring router's IP address, DVMRP version, generation ID, expiration time and status.
INT a3ComDvmrpNbrRouterGenId	1.3.6.1.4.1.43.2.28.3.3.1.3	INTEGER	read-only	The generation ID of this neighboring router.
INT a3ComDvmrpNbrRouterGenIdStatus	1.3.6.1.4.1.43.2.28.3.3.1.9	INTEGER	read-only	This object specifies if this neighboring router provides generation ID and its router list in the DVMRP probe packet.
IP a3ComDvmrpNbrRouterIpAddr	1.3.6.1.4.1.43.2.28.3.3.1.2	IpAddress	read-only	The IP address of this neighboring router.
INT a3ComDvmrpNbrRouterLeafStatus	1.3.6.1.4.1.43.2.28.3.3.1.7	INTEGER	read-only	This object specifies if this neighboring router is a leaf node.
INT a3ComDvmrpNbrRouterMtraceStatus	1.3.6.1.4.1.43.2.28.3.3.1.10	INTEGER	read-only	This object specifies if this neighboring router supports multicast trace route.
INT a3ComDvmrpNbrRouterPort	1.3.6.1.4.1.43.2.28.3.3.1.1	INTEGER	read-only	The port number or tunnel ID of which this entry applies.
INT a3ComDvmrpNbrRouterPruneStatus	1.3.6.1.4.1.43.2.28.3.3.1.8	INTEGER	read-only	This object specifies if this neighboring router supports DVMRP prune.
a3ComDvmrpNbrRouterTable	1.3.6.1.4.1.43.2.28.3.3		not-accessible	This table contains information of each neighboring router.
INT a3ComDvmrpNbrRouterTtl	1.3.6.1.4.1.43.2.28.3.3.1.6	INTEGER	read-only	The time in seconds left for this neighboring router. When the value reaches 0, this entry is deleted from the table.
INT a3ComDvmrpNbrRouterVerMrouted	1.3.6.1.4.1.43.2.28.3.3.1.5	INTEGER	read-only	The version of 'mrouted' that this neighboring router is running.
INT a3ComDvmrpNbrRouterVerProtocol	1.3.6.1.4.1.43.2.28.3.3.1.4	INTEGER	read-only	The version of DVMRP protocol that this neighboring router is running.
PHY a3ComDvmrpNeighborAddr	1.3.6.1.4.1.43.2.28.2.4.1.3	PhysAddress	read-only	This object specifies an X.25 DTE address or a Frame-Relay DLCI.
a3ComDvmrpNeighborEntry	1.3.6.1.4.1.43.2.28.2.4.1		not-accessible	Each entry contains a single X.25 DTE address or a Frame-Relay DLCI.
INT a3ComDvmrpNeighborPort	1.3.6.1.4.1.43.2.28.2.4.1.1	INTEGER	read-only	The port number to which this entry applies.
ROW a3ComDvmrpNeighborStatus	1.3.6.1.4.1.43.2.28.2.4.1.4	RowStatus	read-write	This object is used to add and delete entries in this table. See the definition of RowStatus for detail.
a3ComDvmrpNeighborTable	1.3.6.1.4.1.43.2.28.2.4		not-accessible	This table contains a list of neighbors entries for each X.25 or Frame-Relay networks.
INT a3ComDvmrpNeighborType	1.3.6.1.4.1.43.2.28.2.4.1.2	INTEGER	read-only	This object specifies the media type of the port.
INT a3ComDvmrpPortAggregateCtrl	1.3.6.1.4.1.43.2.28.2.1.1.5	INTEGER	read-write	This object controls the way to advertise routes.
INT a3ComDvmrpPortControl	1.3.6.1.4.1.43.2.28.2.1.1.2	INTEGER	read-write	This object allows the multicast routing to run with DVMRP or not.
a3ComDvmrpPortEntry	1.3.6.1.4.1.43.2.28.2.1.1		not-accessible	Each entry contains information for a spcified port or tunnel.
INT a3ComDvmrpPortIndex	1.3.6.1.4.1.43.2.28.2.1.1.1	INTEGER	read-only	The port number or tunnel ID of which this entry applies. The tunnel ID starts with 1025 and end with 1056, i.e. total tunnel number is limited to 32.
INT a3ComDvmrpPortMetric	1.3.6.1.4.1.43.2.28.2.1.1.3	INTEGER	read-write	This object specifies the cost to the given port or tunnel. A value of 32 is considered 'infinity'.
INT a3ComDvmrpPortRateLimit	1.3.6.1.4.1.43.2.28.2.1.1.4	INTEGER	read-write	This object specifies the bandwidth in Kbits/second that will be allocated for the multicast datagrams traffic. If set the value to 0 then the full bandwidth of the port will be applied.
a3ComDvmrpPortTable	1.3.6.1.4.1.43.2.28.2.1		not-accessible	This table contains entries of parameters associated with every port or tunnel.
INT a3ComDvmrpPrune	1.3.6.1.4.1.43.2.28.1.2	INTEGER	read-write	If this object is set to enabled(1), then prune is on when running multicast routing with DVMRP protocol. If is is set to disabled(2), then prune is turned off.
OCT a3ComDvmrpRouteChild	1.3.6.1.4.1.43.2.28.3.1.1.10	OCTET STRING	read-only	This object identifies ports that connect to child subtree of the multicast tree rooted at a3ComDvmrpRouteSource. Each octet, except the first one which contains a value specified length of this object, contains a bit map of 8 ports. The first (should say the second) octet specifies ports from 1 to 8, the next octet specifies ports 9 to 16, ... etc. The most significant bit in each octet represents the lowest port, the least significant bit represents the highest port among those 8 ports. If the bit is set then the corresponding port connects to a child subtree, otherwise the corresponding port does not connect to a child subtree. The tunnel ports does not include in this object, it is specified in next, a3ComDvmrpRouteChildTunnel object.
OCT a3ComDvmrpRouteChildTunnel	1.3.6.1.4.1.43.2.28.3.1.1.11	OCTET STRING	read-only	This object is the same as above but includes tunnel ports only. The first (should say the second) octet specifies ports from 1025 (for tunnel port 1) to 1032, the next octet specifies ports 1033 to 1040, ... etc.
a3ComDvmrpRouteEntry	1.3.6.1.4.1.43.2.28.3.1.1		not-accessible	Each entry contains route information to a specific subnet or source.
OCT a3ComDvmrpRouteLeaf	1.3.6.1.4.1.43.2.28.3.1.1.12	OCTET STRING	read-only	This objec identifies ports that connect to leaf subnet of the multicast tree rooted at a3ComDvmrpRouteSource. The value meaning within each octet is the same as that of a3ComDvmrpRouteChild, except the bit set means the corresponding port connects to a leaf. This object does not include tunnel ports too.
OCT a3ComDvmrpRouteLeafTunnel	1.3.6.1.4.1.43.2.28.3.1.1.13	OCTET STRING	read-only	This objec is the same as a3ComDvmrpRouteLeaf object but includes tunnel ports only.
IP a3ComDvmrpRouteMask	1.3.6.1.4.1.43.2.28.3.1.1.2	IpAddress	read-only	This object is logical-anded with the source address before comparing to the value in previous object a3ComDvmrpRouteSource.
INT a3ComDvmrpRouteMetric	1.3.6.1.4.1.43.2.28.3.1.1.4	INTEGER	read-only	The routing metric of this route. It's routing-protocol dependenable, for DVMRP, the metric should be in range 1 to 31. The value 32 is considered 'infinity' or unreachable.
INT a3ComDvmrpRoutePort	1.3.6.1.4.1.43.2.28.3.1.1.5	INTEGER	read-only	The port number identifies from which this route comes.
IP a3ComDvmrpRoutePreHop	1.3.6.1.4.1.43.2.28.3.1.1.3	IpAddress	read-only	The IP address of the upstream router of this route.
INT a3ComDvmrpRouteProtocol	1.3.6.1.4.1.43.2.28.3.1.1.8	INTEGER	read-only	The routing algorithm to which this route applies.
IP a3ComDvmrpRouteSource	1.3.6.1.4.1.43.2.28.3.1.1.1	IpAddress	read-only	The source IP address of this route.
INT a3ComDvmrpRouteStatus	1.3.6.1.4.1.43.2.28.3.1.1.7	INTEGER	read-only	The status of route.
a3ComDvmrpRouteTable	1.3.6.1.4.1.43.2.28.3.1		not-accessible	This table contains multicast route information.
INT a3ComDvmrpRouteTtl	1.3.6.1.4.1.43.2.28.3.1.1.9	INTEGER	read-only	The time in seconds this route was last updated.
INT a3ComDvmrpRouteType	1.3.6.1.4.1.43.2.28.3.1.1.6	INTEGER	read-only	The type of route.
a3ComDvmrpSConfig	1.3.6.1.4.1.43.2.28.1
a3ComDvmrpTunnelEntry	1.3.6.1.4.1.43.2.28.2.5.1		not-accessible	Each entry contains parameters associated with a specific tunnel.
INT a3ComDvmrpTunnelId	1.3.6.1.4.1.43.2.28.2.5.1.1	INTEGER	read-only	The ID number of which this entry applies. Tunnel ID starts with 1025 and ends with 1056.
IP a3ComDvmrpTunnelLocalIp	1.3.6.1.4.1.43.2.28.2.5.1.2	IpAddress	read-write	This object specifies the IP address of local end of a tunnel. It must be one of system's directly connected subnet.
IP a3ComDvmrpTunnelRemoteIp	1.3.6.1.4.1.43.2.28.2.5.1.3	IpAddress	read-write	This object specifies the IP address of remote end of a tunnel.
ROW a3ComDvmrpTunnelStatus	1.3.6.1.4.1.43.2.28.2.5.1.5	RowStatus	read-write	This object is used to add and delete entries in this table. See the definition of RowStatus for detail.
a3ComDvmrpTunnelTable	1.3.6.1.4.1.43.2.28.2.5		not-accessible	This table contains entries of tunnel.
INT a3ComDvmrpTunnelTtl	1.3.6.1.4.1.43.2.28.2.5.1.4	INTEGER	read-write	This object specifies the value to be put in IP packet's TTL field when transmits packets through a tunnel.
INT a3ComDvmrpUpdateTime	1.3.6.1.4.1.43.2.28.1.3	INTEGER	read-write	This object specifies the time interval in seconds that Route Report containing complete routing table is sent. It also derives Route Expiration time which is set to three times value of this object, Garbage Collection time which is set to five times value of this object, Neighbor Expiration time which is set to two times value of this object plus 20 seconds and Leaf Confirmation time which is set to three times value of this object plus 20 seconds.
brouterMIB	1.3.6.1.4.1.43.2

RFC description

Distance Vector Multicast Routing Protocol configuration for 3Com bridge routers.

Start monitoring 3Com/H3C multicast routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-DVMRP-R1-MIB

What Is A3COM-DVMRP-R1-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description