| OID symbolic | OID numeric | Type | Access | Description |
|---|
| a3Com | 1.3.6.1.4.1.43 | | | |
| brouterMIB | 1.3.6.1.4.1.43.2 | | | |
| a3ComMLN | 1.3.6.1.4.1.43.2.23 | | | |
| INT a3mlnMaxPorts | 1.3.6.1.4.1.43.2.23.1 | INTEGER | read-only | The maximum number of virtual and physical ports supported
by the agent. This value should be used to verify correct
port values. |
| INT a3mlnMaxPhyPorts | 1.3.6.1.4.1.43.2.23.2 | INTEGER | read-only | The maximum number of physical ports supported by the
agent. This value should be used to verify correct port
values. |
| INT a3mlnCCSsaveErr | 1.3.6.1.4.1.43.2.23.3 | INTEGER | read-only | The count of detected CCS Parameter saves that failed during
the previous set operation. A value other than zero indicates
that the running and stored configurations are not the same. |
| INT a3mlnCCSdelErr | 1.3.6.1.4.1.43.2.23.4 | INTEGER | read-only | The count of detected CCS Parameter deletes that failed during
the previous set operation. A value other than zero indicates
that the running and stored configurations are not the same. |
| INT a3mlnSetStatus | 1.3.6.1.4.1.43.2.23.5 | INTEGER | read-only | The application's result of the last SET operation. This
object is used to determine if the a3mlnLastSetMsg object
is valid, and is NOT for general SNMP errors. In order to
see warnings, this object must be polled after any set. The
error state is communicated by the agent failing the set
operation. |
| STR a3mlnSetMsg | 1.3.6.1.4.1.43.2.23.6 | DisplayString | read-only | The equalivent UI message for the previous SET operation.
Valid only if a3mlnLastSetStatus is set to a value other
than `setNoErr'. |
| a3mlnPortTable | 1.3.6.1.4.1.43.2.23.7 | | not-accessible | A table of all physical and virtual ports which may
be configured with the Logical Networks service. |
| a3mlnPortEntry | 1.3.6.1.4.1.43.2.23.7.1 | | not-accessible | Each entry in this table represents a physical or
virtual port. |
| INT a3mlnPindex | 1.3.6.1.4.1.43.2.23.7.1.1 | INTEGER | read-only | This object specifies a port entry in the table and is
specified as a value within the total port range
(a3mlnMaxPorts). |
| INT a3mlnPtype | 1.3.6.1.4.1.43.2.23.7.1.2 | INTEGER | read-only | The port's type. A value of `ppmPort' indicates that the
port has not been configured in any Logical Network. |
| INT a3mlnPowner | 1.3.6.1.4.1.43.2.23.7.1.3 | INTEGER | read-only | The port's owner (media type). If this is a Group Port, all
Member ports must have the same owner. A value of `otherMedia'
would imply a non-supported owner (media type). |
| INT a3mlnPlink | 1.3.6.1.4.1.43.2.23.7.1.4 | INTEGER | read-only | For a Group Port, this is either the value of the first
member port or, if there are no member ports, the value
negative two. For a Member port, this is the value of
Group Port. |
| INT a3mlnPstState | 1.3.6.1.4.1.43.2.23.7.1.5 | INTEGER | read-only | The Spanning Tree state of this port. For a Group Port,
this is the aggregate of all Member port states. If all
Member ports are blocking, the Group Port is blocking.
If a single Member port is forwarding, the Group Port is
forwarding. For a Member port, this is that port's state.
If the port has not been configured as an MLN port, the
value `ignore' will be returned. |
| INT a3mlnPtbState | 1.3.6.1.4.1.43.2.23.7.1.6 | INTEGER | read-only | Only valid for Member ports. This is the Transparent Bridge
CONTrol value setting of the learn parameter. If the port
has not been configured as a Logical Network port, the value
`ignore' will be returned. |
| INT a3mlnPgrpPrimaryPort | 1.3.6.1.4.1.43.2.23.7.1.7 | INTEGER | read-only | Only valid for Group Ports. This is the value of the physical
port assigned as the group's primary port. This value is
assigned by the agent and may change over time. |
| INT a3mlnPgrpSrcAdrPort | 1.3.6.1.4.1.43.2.23.7.1.8 | INTEGER | read-only | Only valid for Group Ports. This is the physical port used
to assign the group's source MAC address used for all packets
transmitted by the group. This value is assigned by the agent.
A value of negative two indicates that no source port has been
assigned or that this is not a Group Port. |
| INT a3mlnPgrpSrcAdrMedia | 1.3.6.1.4.1.43.2.23.7.1.9 | INTEGER | read-only | Only valid for Group Ports. This is the media type of the
physical port being used for the group's source address.
This value is assigned by the agent. |
| PHY a3mlnPgrpSrcAdrValue | 1.3.6.1.4.1.43.2.23.7.1.10 | PhysAddress | read-only | Only valid for Group Ports. This is the physical MAC
address of the group's source port. In the future, a profile
VARIATION should be used to further specify media formats
such as MacAddress, SMDSAddress, etc. This value is assigned
by the agent. |
| STR a3mlnPgrpDescription | 1.3.6.1.4.1.43.2.23.7.1.11 | DisplayString | read-only | Only valid for Group Ports. This is the description (name)
string for this Logical Network. |
| a3mlnGroupTable | 1.3.6.1.4.1.43.2.23.8 | | not-accessible | A table of all configured Logical Network Group
Ports. |
| a3mlnGroupEntry | 1.3.6.1.4.1.43.2.23.8.1 | | not-accessible | Each entry in this table represents a Logical Network's
Group Port. |
| INT a3mlnGrpPort | 1.3.6.1.4.1.43.2.23.8.1.1 | INTEGER | read-only | This object specifies an entry in the table, and is a
Group Port. Group Ports are virtual ports used as points
of attachment to Logical Networks by upper layer clients.
Valid values number within the virtual port range (greater
than a3mlnMaxPhyPorts and less than a3mlnMaxPorts). |
| INT a3mlnGrpPortType | 1.3.6.1.4.1.43.2.23.8.1.2 | INTEGER | read-only | This port's type. The only valid value for a Group Port is
`groupPort'. |
| INT a3mlnGrpPortState | 1.3.6.1.4.1.43.2.23.8.1.3 | INTEGER | read-only | The PPM state of this Group Port. |
| INT a3mlnGrpPrimaryPort | 1.3.6.1.4.1.43.2.23.8.1.4 | INTEGER | read-only | This is the value of the physical port assigned as
the group's primary port. This value is assigned by
the agent. |
| INT a3mlnGrpOwner | 1.3.6.1.4.1.43.2.23.8.1.5 | INTEGER | read-write | The owner of this group (which is actually the media type
for the group). All Member ports must have the same owner. |
| INT a3mlnGrpMemberCount | 1.3.6.1.4.1.43.2.23.8.1.6 | INTEGER | read-only | The number of Member ports in this group. |
| INT a3mlnGrpFirstMember | 1.3.6.1.4.1.43.2.23.8.1.7 | INTEGER | read-only | This is the value (index) of the first Member port of
this group. A value of negative two indicates that no
Member ports have been configured. |
| STR a3mlnGrpDescription | 1.3.6.1.4.1.43.2.23.8.1.8 | DisplayString | read-write | The description (name) string for this logical network. |
| ROW a3mlnGrpEntryStatus | 1.3.6.1.4.1.43.2.23.8.1.9 | RowStatus | read-write | This object is used to add and delete entries in this
table. See RowStatus description at the beginning of
this MIB. Note - A group's description may be changed
without first deleting the row. |
| a3mlnMemberTable | 1.3.6.1.4.1.43.2.23.9 | | not-accessible | A table of configured Logical Networks. |
| a3mlnMemberEntry | 1.3.6.1.4.1.43.2.23.9.1 | | not-accessible | Each entry in this table represents a Logical Network. |
| INT a3mlnMemGrpPort | 1.3.6.1.4.1.43.2.23.9.1.1 | INTEGER | read-only | This object specifies a Logical Network within the table
and is a Group Port within the virtual port range (greater
than a3mlnMaxPhyPorts and less than a3mlnMaxPorts). |
| INT a3mlnMemPort | 1.3.6.1.4.1.43.2.23.9.1.2 | INTEGER | read-only | This object specifies a Member port within a Logical Network
and is a physical port within the physical port range
(less than a3mlnMaxPhyPorts). |
| INT a3mlnMemOwner | 1.3.6.1.4.1.43.2.23.9.1.3 | INTEGER | read-write | The owner of this group (which is actually the media type
for the group). All Member ports must have the same owner. |
| ROW a3mlnMemEntryStatus | 1.3.6.1.4.1.43.2.23.9.1.4 | RowStatus | read-write | This object is used to add and delete entries in this
table. See RowStatus description at the beginning of
this MIB. |
| a3mlnStatistics | 1.3.6.1.4.1.43.2.23.10 | | | |
| INT a3mlnStatSelGrpPort | 1.3.6.1.4.1.43.2.23.10.1 | INTEGER | read-only | The number of times a Group Port has been selected. |
| INT a3mlnStatSelMacAdr | 1.3.6.1.4.1.43.2.23.10.2 | INTEGER | read-only | The number of times a MAC address has been selected. |
| a3mlnPortStatTable | 1.3.6.1.4.1.43.2.23.10.3 | | not-accessible | A table of Logical Network Member port statistics. |
| a3mlnPortStatEntry | 1.3.6.1.4.1.43.2.23.10.3.1 | | not-accessible | Each entry in this table represents statistics for a
Member port of a Logical Network. |
| INT a3mlnPStatIndex | 1.3.6.1.4.1.43.2.23.10.3.1.1 | INTEGER | read-only | This object specifies an entry in the port statistics table
and is a Member port within the physical port range (less
than a3mlnMaxPhyPorts). |
| INT a3mlnPStatRcvd | 1.3.6.1.4.1.43.2.23.10.3.1.2 | INTEGER | read-only | Count of data frames received on this port. |
| INT a3mlnPStatXmit | 1.3.6.1.4.1.43.2.23.10.3.1.3 | INTEGER | read-only | Count of data frames transmitted from this port. |
| INT a3mlnPStatStaMoveFrom | 1.3.6.1.4.1.43.2.23.10.3.1.4 | INTEGER | read-only | Count of detected stations moving away from this port. |
| INT a3mlnPStatStaMoveTo | 1.3.6.1.4.1.43.2.23.10.3.1.5 | INTEGER | read-only | Count of detected stations moving to this port. |
| INT a3mlnPStatSTAchange | 1.3.6.1.4.1.43.2.23.10.3.1.6 | INTEGER | read-only | Count of Spanning Tree state changes for this port. |
