All MIBs › AS-2000 › psIpxStatus
psIpxStatus
Module: AS-2000
OID (symbolic): AS-2000::psIpxStatus
OID (numeric): 1.3.6.1.4.1.1751.2.4.3.12.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Which protocol is supported, i.e, IP or IPX or both IP and IPX.
What is psIpxStatus?
This setting controls which network protocols the device supports: IP only, IPX only, or both IP and IPX together. It determines which network stacks are active on the Access Server. An administrator would set this to '1' for IP-only mode or '3' for dual-stack support.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.4.3.12.1 snmpwalk -v2c -c public <target> AS-2000::psIpxStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.4.3.12.1.1 snmpget -v2c -c public <target> AS-2000::psIpxStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.4.3.12.1.1 i <value>
Start monitoring Lucent AS-2000 wireless access server platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AS-2000::psIpxStatus OID value, configure state conditions and alerts, and monitor any Lucent AS-2000 wireless access server platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751.2.4 | orinoco | AS-2000 |
| 1.3.6.1.4.1.1751.2.4.3 | as2000 | AS-2000 |
| 1.3.6.1.4.1.1751.2.4.3.12 | orinocoIPX | AS-2000 |
| 1.3.6.1.4.1.1751.2.4.3.12.1 | psIpxStatus | AS-2000 |