ALCATEL-IND1-QOS-MIB

All MIBs › ALCATEL-IND1-QOS-MIB

Organization: Alcatel IND

Last Updated: 2007-04-03

Category: Quality of Service, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch QoS MIB for managing policy rules, traffic queues, scheduling, and DSCP/802.1p marking.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-QOS-MIB?

ALCATEL-IND1-QOS-MIB is an Alcatel (OmniSwitch, IND1 platform family) vendor MIB for managing Quality of Service and traffic filtering, covering QoS policy rules, traffic classification conditions and actions, queue scheduling, and DSCP/802.1p marking. It exposes a rule table defining named QoS rules with enable state, source, precedence, match condition, and resulting action, alongside separate configuration, statistics, and classification object groups. This is primarily a QoS configuration and traffic-statistics MIB: an operator monitors alaQoSStats to see how traffic is being classified and queued in practice, and checks alaQoSRuleEntry fields to confirm policy rules are enabled and correctly ordered by precedence, which is important for diagnosing why certain traffic isn't receiving expected prioritization or filtering treatment. It depends on standard 802.1p/DSCP QoS marking conventions and Alcatel's broader IND1 platform MIB family for interface/port context. It is deployed on Alcatel (later Alcatel-Lucent) OmniSwitch enterprise switches for policy-based QoS and traffic filtering. Engineers can download the ALCATEL-IND1-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel (Alcatel-Lucent) OmniSwitch enterprise switch

Monitoring Examples

An admin would poll alaQoSRuleTable/alaQoSRuleEntry to check alaQoSRuleEnabled and alaQoSRulePrecedence for a named rule, confirming alaQoSRuleCondition and alaQoSRuleAction match the intended traffic classification and marking policy. If voice traffic isn't being prioritized as expected, checking alaQoSRuleSource and alaQoSRuleReflexive settings against alaQoSStats counters would reveal whether the rule is matching traffic at all or simply not applying the intended queue action. alaQoSRuleLog would be enabled temporarily to capture which packets hit a specific rule for troubleshooting.

What Can Be Monitored

QoS rule enabled state
rule precedence/ordering
traffic match condition
rule action (queue/marking)
QoS statistics counters
rule logging state

Imported Objects

From ALCATEL-IND1-BASE

softentIND1QoS

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From IPV6-TC

Ipv6Address

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

How to Use in IPNetwork Monitor

Example using alaQoSStatsL2Events OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alaQoSStatsL2Events into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of L2 classification events. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 alaQoSAction8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.28	Integer32	read-create	802.1p value to stamp on traffic.
INT alaQoSAction8021pStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.29	INTEGER	read-create	Status field indicating whether 802.1p is specified(enabled) or not(disabled).
IP alaQoSActionAlternateGatewayIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.52	IpAddress	read-create	Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
INT alaQoSActionAlternateGatewayIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.53	INTEGER	read-create	Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
I32 alaQoSActionCBS	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.71	Integer32	read-create	Committed Burst Size - bucket size in byte.
INT alaQoSActionCBSStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.72	INTEGER	read-create	Status field indicating whether CBS value is specified(enabled) or not(disabled).
I32 alaQoSActionCIR	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.69	Integer32	read-create	Committed Information Rate - bandwidth values in kilobits per second.
INT alaQoSActionCIRStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.70	INTEGER	read-create	Status field indicating whether CIR value is specified(enabled) or not(disabled).
INT alaQoSActionCounterColor	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.77	INTEGER	read-create	Specifies the color mode for the counters which will be used for sr/trTCM.
IP alaQoSActionDestinationRewriteIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.43	IpAddress	read-create	Destination IP address to rewrite on traffic.
INT alaQoSActionDestinationRewriteIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.44	INTEGER	read-create	Status field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
IP alaQoSActionDestinationRewriteIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.45	IpAddress	read-create	Destination rewrite IP mask to determine how much of destination IP to rewrite.
STR alaQoSActionDestinationRewriteNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.46	DisplayString	read-create	Name of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition.
INT alaQoSActionDestinationRewriteNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.47	INTEGER	read-create	Status field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
INT alaQoSActionDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.3	INTEGER	read-create	Disposition of traffic using the action. Use to filter out unwanted traffic.
INT alaQoSActionDropAlgorithm	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.4	INTEGER	read-create	Which drop algorithm should be used to discard traffic when oversubscribed.
I32 alaQoSActionDscp	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.32	Integer32	read-create	TOS value to stamp on traffic. (High 6 bits of TOS byte)
INT alaQoSActionDscpStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.33	INTEGER	read-create	Status field indicating whether DSCP is specified(enabled) or not(disabled).
alaQoSActionEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1		not-accessible	Definition of QoS Action
I32 alaQoSActionJitter	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.20	Integer32	read-create	Maximum jitter to allow for traffic.
INT alaQoSActionJitterStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.21	INTEGER	read-create	Status field indicating whether jitter is specified(enabled) or not(disabled).
I32 alaQoSActionLatency	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.22	Integer32	read-create	Maximum latency to allow for traffic.
INT alaQoSActionLatencyStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.23	INTEGER	read-create	Status field indicating whether latency is specified(enabled) or not(disabled).
STR alaQoSActionLoadBalanceGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.48	DisplayString	read-create	Name of load balance group to use for traffic
INT alaQoSActionLoadBalanceGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.49	INTEGER	read-create	Status field indicating whether load balanace group is specified(enabled) or not(disabled).
INT alaQoSActionMapFrom	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.34	INTEGER	read-create	What field to use as key for mapping 802.1p/TOS/DSCP priorities
STR alaQoSActionMapGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.36	DisplayString	read-create	Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
INT alaQoSActionMapGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.37	INTEGER	read-create	Status field indicating whether a map group is specified(enabled) or not(disabled).
INT alaQoSActionMapTo	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.35	INTEGER	read-create	What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
I32 alaQoSActionMaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.13	Integer32	read-create	Maximum bandwidth (Kbits/sec) allowed for traffic
INT alaQoSActionMaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.14	INTEGER	read-create	Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
I32 alaQoSActionMaximumBuffers	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.26	Integer32	read-create	Maxmimum buffers for queues for traffic.
INT alaQoSActionMaximumBuffersStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.27	INTEGER	read-create	Status field indicating whether maximum buffers is specified(enabled) or not(disabled).
I32 alaQoSActionMaximumDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.24	Integer32	read-create	Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
INT alaQoSActionMaximumDepthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.25	INTEGER	read-create	Status field indicating whether maximum depth is specified(enabled) or not(disabled).
I32 alaQoSActionMinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.11	Integer32	read-create	Minimum bandwidth (Kbits/sec) to guarantee for traffic
INT alaQoSActionMinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.12	INTEGER	read-create	Status field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
I32 alaQoSActionMinimumDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.55	Integer32	read-create	Minimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications.
INT alaQoSActionMinimumDepthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.56	INTEGER	read-create	Status field indicating whether minimum depth is specified(enabled) or not(disabled).
INT alaQoSActionMirrorMode	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.67	INTEGER	read-create	Mirroring mode
INT alaQoSActionMirrorModeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.68	INTEGER	read-create	Status for alaQoSActionMirrorMode field
I32 alaQoSActionMirrorPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.66	Integer32	read-create	Destination physical port for mirrored traffic
I32 alaQoSActionMirrorSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.65	Integer32	read-create	Destination physical slot for mirrored traffic
STR alaQoSActionName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.1	DisplayString	not-accessible	Name of action
INT alaQoSActionNocache	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.58	INTEGER	read-create	When enabled, don't make hardware entries for matching flows.
I32 alaQoSActionPBS	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.75	Integer32	read-create	Peak Burst Size - bucket size in byte.
INT alaQoSActionPBSStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.76	INTEGER	read-create	Status field indicating whether PBS value is specified(enabled) or not(disabled).
I32 alaQoSActionPeakBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.15	Integer32	read-create	Peak bandwidth (Kbits/sec) allowed for traffic
INT alaQoSActionPeakBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.16	INTEGER	read-create	Status field indicating whether peak bandwidth is specified(enabled) or not(disabled).
IP alaQoSActionPermanentGatewayIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.50	IpAddress	read-create	Next hop gateway to use for traffic
INT alaQoSActionPermanentGatewayIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.51	INTEGER	read-create	Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
I32 alaQoSActionPIR	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.73	Integer32	read-create	Peak Information Rate - bandwidth values in kilobits per second.
INT alaQoSActionPIRStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.74	INTEGER	read-create	Status field indicating whether PIR value is specified(enabled) or not(disabled).
INT alaQoSActionPortdisable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.59	INTEGER	read-create	When enabled, disable the physical source port of the traffic.
I32 alaQoSActionPriority	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.17	Integer32	read-create	Internal and queueing priority to use for traffic.
INT alaQoSActionPriorityStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.18	INTEGER	read-create	Status field indicating whether priority is specified(enabled) or not(disabled).
I32 alaQoSActionRedirectAgg	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.63	Integer32	read-create	Destination linkagg for redirected traffic
INT alaQoSActionRedirectAggStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.64	INTEGER	read-create	Status for alaQoSActionRedirectAggStatus field
I32 alaQoSActionRedirectPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.62	Integer32	read-create	Destination physical port for redirected traffic
I32 alaQoSActionRedirectSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.60	Integer32	read-create	Destination physical slot for redirected traffic
INT alaQoSActionRedirectSlotStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.61	INTEGER	read-create	Status for alaQoSActionRedirectSlotStatus field
ROW alaQoSActionRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.54	RowStatus	read-create	Used to create/delete actions according to the RowStatus convention
INT alaQoSActionShared	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.19	INTEGER	read-create	When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
INT alaQoSActionSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.2	INTEGER	read-create	What entity created the action.
IP alaQoSActionSourceRewriteIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.38	IpAddress	read-create	Source IP address to rewrite on traffic.
INT alaQoSActionSourceRewriteIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.39	INTEGER	read-create	Status field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
IP alaQoSActionSourceRewriteIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.40	IpAddress	read-create	Source rewrite IP mask to determine how much of source IP to rewrite.
STR alaQoSActionSourceRewriteNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.41	DisplayString	read-create	Name of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condition.
INT alaQoSActionSourceRewriteNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.42	INTEGER	read-create	Status field indicating whether source rewrite network group is specified(enabled) or not(disabled).
alaQoSActionTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27		not-accessible	Table of QoS Action definitions
I32 alaQoSActionTos	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.30	Integer32	read-create	TOS value to stamp on traffic. (High 3 bits of TOS byte)
INT alaQoSActionTosStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.31	INTEGER	read-create	Status field indicating whether TOS is specified(enabled) or not(disabled).
INT alaQoSActionVPNAccess	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.57	INTEGER	read-create	How to encrypt traffic
I32 alaQoSActionWredMaximumProbability	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.9	Integer32	read-create	Probabilty that traffic will be dropped at WRED maximum threshold.
INT alaQoSActionWredMaximumProbabilityStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.10	INTEGER	read-create	Status field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
I32 alaQoSActionWredMaximumThreshold	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.5	Integer32	read-create	Bandwidth at which WRED should discard most traffic.
INT alaQoSActionWredMaximumThresholdStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.6	INTEGER	read-create	Status field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
I32 alaQoSActionWredMinimumThreshold	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.7	Integer32	read-create	Bandwidth at which WRED should start to discard traffic.
INT alaQoSActionWredMinimumThresholdStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.8	INTEGER	read-create	Status field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
I32 alaQoSAppliedAction8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.28	Integer32	read-only	802.1p value to stamp on traffic.
INT alaQoSAppliedAction8021pStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.29	INTEGER	read-only	Status field indicating whether 802.1p is specified(enabled) or not(disabled).
IP alaQoSAppliedActionAlternateGatewayIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.52	IpAddress	read-only	Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
INT alaQoSAppliedActionAlternateGatewayIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.53	INTEGER	read-only	Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionCBS	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.71	Integer32	read-create	Committed Burst Size - bucket size in byte.
INT alaQoSAppliedActionCBSStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.72	INTEGER	read-create	Status field indicating whether CBS value is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionCIR	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.69	Integer32	read-create	Committed Information Rate - bandwidth values in kilobits per second.
INT alaQoSAppliedActionCIRStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.70	INTEGER	read-create	Status field indicating whether CIR value is specified(enabled) or not(disabled).
INT alaQoSAppliedActionCounterColor	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.77	INTEGER	read-create	Specifies the color mode for the counters which will be used for sr/trTCM.
IP alaQoSAppliedActionDestinationRewriteIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.43	IpAddress	read-only	Destination IP address to rewrite on traffic.
INT alaQoSAppliedActionDestinationRewriteIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.44	INTEGER	read-only	Status field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
IP alaQoSAppliedActionDestinationRewriteIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.45	IpAddress	read-only	Destination rewrite IP mask to determine how much of destination IP to rewrite.
STR alaQoSAppliedActionDestinationRewriteNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.46	DisplayString	read-only	Name of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition.
INT alaQoSAppliedActionDestinationRewriteNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.47	INTEGER	read-only	Status field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
INT alaQoSAppliedActionDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.3	INTEGER	read-only	Disposition of traffic using the action. Use to filter out unwanted traffic.
INT alaQoSAppliedActionDropAlgorithm	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.4	INTEGER	read-only	Which drop algorithm should be used to discard traffic when oversubscribed.
I32 alaQoSAppliedActionDscp	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.32	Integer32	read-only	TOS value to stamp on traffic. (High 6 bits of TOS byte)
INT alaQoSAppliedActionDscpStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.33	INTEGER	read-only	Status field indicating whether DSCP is specified(enabled) or not(disabled).
alaQoSAppliedActionEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1		not-accessible	Definition of QoS AppliedAction
I32 alaQoSAppliedActionJitter	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.20	Integer32	read-only	Maximum jitter to allow for traffic.
INT alaQoSAppliedActionJitterStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.21	INTEGER	read-only	Status field indicating whether jitter is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionLatency	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.22	Integer32	read-only	Maximum latency to allow for traffic.
INT alaQoSAppliedActionLatencyStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.23	INTEGER	read-only	Status field indicating whether latency is specified(enabled) or not(disabled).
STR alaQoSAppliedActionLoadBalanceGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.48	DisplayString	read-only	Name of load balance group to use for traffic
INT alaQoSAppliedActionLoadBalanceGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.49	INTEGER	read-only	Status field indicating whether load balanace group is specified(enabled) or not(disabled).
INT alaQoSAppliedActionMapFrom	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.34	INTEGER	read-only	What field to use as key for mapping 802.1p/TOS/DSCP priorities
STR alaQoSAppliedActionMapGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.36	DisplayString	read-only	Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
INT alaQoSAppliedActionMapGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.37	INTEGER	read-only	Status field indicating whether a map group is specified(enabled) or not(disabled).
INT alaQoSAppliedActionMapTo	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.35	INTEGER	read-only	What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
I32 alaQoSAppliedActionMaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.13	Integer32	read-only	Maximum bandwidth (Kbits/sec) allowed for traffic
INT alaQoSAppliedActionMaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.14	INTEGER	read-only	Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionMaximumBuffers	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.26	Integer32	read-only	Maxmimum buffers for queues for traffic.
INT alaQoSAppliedActionMaximumBuffersStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.27	INTEGER	read-only	Status field indicating whether maximum buffers is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionMaximumDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.24	Integer32	read-only	Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
INT alaQoSAppliedActionMaximumDepthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.25	INTEGER	read-only	Status field indicating whether maximum depth is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionMinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.11	Integer32	read-only	Minimum bandwidth (Kbits/sec) to guarantee for traffic
INT alaQoSAppliedActionMinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.12	INTEGER	read-only	Status field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionMinimumDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.55	Integer32	read-only	Minimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications.
INT alaQoSAppliedActionMinimumDepthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.56	INTEGER	read-only	Status field indicating whether minimum depth is specified(enabled) or not(disabled).
INT alaQoSAppliedActionMirrorMode	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.67	INTEGER	read-only	Mirroring mode
INT alaQoSAppliedActionMirrorModeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.68	INTEGER	read-only	Status for alaQoSAppliedActionMirrorMode field
I32 alaQoSAppliedActionMirrorPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.66	Integer32	read-only	Destination physical port for mirrored traffic
I32 alaQoSAppliedActionMirrorSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.65	Integer32	read-only	Destination physical slot for mirrored traffic
STR alaQoSAppliedActionName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.1	DisplayString	not-accessible	Name of action
INT alaQoSAppliedActionNocache	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.58	INTEGER	read-only	When enabled, don't make hardware entries for matching flows.
I32 alaQoSAppliedActionPBS	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.75	Integer32	read-create	Peak Burst Size - bucket size in byte.
INT alaQoSAppliedActionPBSStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.76	INTEGER	read-create	Status field indicating whether PBS value is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionPeakBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.15	Integer32	read-only	Peak bandwidth (Kbits/sec) allowed for traffic
INT alaQoSAppliedActionPeakBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.16	INTEGER	read-only	Status field indicating whether peak bandwidth is specified(enabled) or not(disabled).
IP alaQoSAppliedActionPermanentGatewayIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.50	IpAddress	read-only	Next hop gateway to use for traffic
INT alaQoSAppliedActionPermanentGatewayIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.51	INTEGER	read-only	Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionPIR	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.73	Integer32	read-create	Peak Information Rate - bandwidth values in kilobits per second.
INT alaQoSAppliedActionPIRStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.74	INTEGER	read-create	Status field indicating whether PIR value is specified(enabled) or not(disabled).
INT alaQoSAppliedActionPortdisable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.59	INTEGER	read-only	When enabled, disable the physical source port of the traffic.
I32 alaQoSAppliedActionPriority	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.17	Integer32	read-only	Internal and queueing priority to use for traffic.
INT alaQoSAppliedActionPriorityStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.18	INTEGER	read-only	Status field indicating whether priority is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionRedirectAgg	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.63	Integer32	read-only	Destination linkagg for redirected traffic
INT alaQoSAppliedActionRedirectAggStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.64	INTEGER	read-only	Status for alaQoSAppliedActionRedirectAggStatus field
I32 alaQoSAppliedActionRedirectPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.62	Integer32	read-only	Destination physical port for redirected traffic
I32 alaQoSAppliedActionRedirectSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.60	Integer32	read-only	Destination physical slot for redirected traffic
INT alaQoSAppliedActionRedirectSlotStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.61	INTEGER	read-only	Status for alaQoSAppliedActionRedirectSlotStatus field
ROW alaQoSAppliedActionRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.54	RowStatus	read-only	Used to create/delete actions according to the RowStatus convention
INT alaQoSAppliedActionShared	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.19	INTEGER	read-only	When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
INT alaQoSAppliedActionSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.2	INTEGER	read-only	What entity created the action.
IP alaQoSAppliedActionSourceRewriteIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.38	IpAddress	read-only	Source IP address to rewrite on traffic.
INT alaQoSAppliedActionSourceRewriteIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.39	INTEGER	read-only	Status field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
IP alaQoSAppliedActionSourceRewriteIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.40	IpAddress	read-only	Source rewrite IP mask to determine how much of source IP to rewrite.
STR alaQoSAppliedActionSourceRewriteNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.41	DisplayString	read-only	Name of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condition.
INT alaQoSAppliedActionSourceRewriteNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.42	INTEGER	read-only	Status field indicating whether source rewrite network group is specified(enabled) or not(disabled).
alaQoSAppliedActionTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28		not-accessible	Table of QoS AppliedAction definitions
I32 alaQoSAppliedActionTos	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.30	Integer32	read-only	TOS value to stamp on traffic. (High 3 bits of TOS byte)
INT alaQoSAppliedActionTosStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.31	INTEGER	read-only	Status field indicating whether TOS is specified(enabled) or not(disabled).
INT alaQoSAppliedActionVPNAccess	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.57	INTEGER	read-only	How to encrypt traffic
I32 alaQoSAppliedActionWredMaximumProbability	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.9	Integer32	read-only	Probabilty that traffic will be dropped at WRED maximum threshold.
INT alaQoSAppliedActionWredMaximumProbabilityStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.10	INTEGER	read-only	Status field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionWredMaximumThreshold	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.5	Integer32	read-only	Bandwidth at which WRED should discard most traffic.
INT alaQoSAppliedActionWredMaximumThresholdStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.6	INTEGER	read-only	Status field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
I32 alaQoSAppliedActionWredMinimumThreshold	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.7	Integer32	read-only	Bandwidth at which WRED should start to discard traffic.
INT alaQoSAppliedActionWredMinimumThresholdStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.8	INTEGER	read-only	Status field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
I32 alaQoSAppliedCondition8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.31	Integer32	read-only	802.1p value to use for traffic classification
I32 alaQoSAppliedCondition8021pEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.117	Integer32	read-create	802.1p range end value to use for traffic classification.
INT alaQoSAppliedCondition8021pStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.32	INTEGER	read-only	Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
INT alaQoSAppliedConditionDestinationInterfaceType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.15	INTEGER	read-only	Destination physical interface type to use for traffic classification
INT alaQoSAppliedConditionDestinationInterfaceTypeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.16	INTEGER	read-only	Status field indicating whether the destination physical interface type needs to be matched(enabled) or not(disabled).
IP alaQoSAppliedConditionDestinationIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.38	IpAddress	read-only	Destination IP address to use for traffic classification
INT alaQoSAppliedConditionDestinationIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.39	INTEGER	read-only	Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
IP alaQoSAppliedConditionDestinationIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.40	IpAddress	read-only	Destination IP mask to use for traffic classification
I32 alaQoSAppliedConditionDestinationIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.58	Integer32	read-only	Destination IP port range start to use for traffic classification.
I32 alaQoSAppliedConditionDestinationIpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.74	Integer32	read-only	Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
INT alaQoSAppliedConditionDestinationIpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.59	INTEGER	read-only	Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
ADR alaQoSAppliedConditionDestinationIpv6Addr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.99	Ipv6Address	read-only	Destination IPv6 address to use for traffic classification
INT alaQoSAppliedConditionDestinationIpv6AddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.100	INTEGER	read-only	Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
ADR alaQoSAppliedConditionDestinationIpv6Mask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.101	Ipv6Address	read-only	Destination IPv6 mask to use for traffic classification
MAC alaQoSAppliedConditionDestinationMacAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.22	MacAddress	read-only	Destination MAC address to use for traffic classification
INT alaQoSAppliedConditionDestinationMacAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.23	INTEGER	read-only	Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
STR alaQoSAppliedConditionDestinationMacGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.25	DisplayString	read-only	Destination MAC group to use for traffic classification
INT alaQoSAppliedConditionDestinationMacGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.26	INTEGER	read-only	Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
MAC alaQoSAppliedConditionDestinationMacMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.24	MacAddress	read-only	Destination MAC mask to use for traffic classification
STR alaQoSAppliedConditionDestinationNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.41	DisplayString	read-only	Destination network group to use for traffic classification
INT alaQoSAppliedConditionDestinationNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.42	INTEGER	read-only	Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionDestinationPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.10	Integer32	read-only	Destination physical port range start to use for traffic classification
I32 alaQoSAppliedConditionDestinationPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.72	Integer32	read-only	Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port.
STR alaQoSAppliedConditionDestinationPortGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.11	DisplayString	read-only	Destination physical port group to use for traffic classification
INT alaQoSAppliedConditionDestinationPortGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.12	INTEGER	read-only	Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionDestinationSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.8	Integer32	read-only	Destination physical slot used for traffic classification When 0, the port identifies an aggregate
INT alaQoSAppliedConditionDestinationSlotStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.9	INTEGER	read-only	Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionDestinationTcpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.78	Integer32	read-only	Destination TCP port range start to use for traffic classification.
I32 alaQoSAppliedConditionDestinationTcpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.80	Integer32	read-only	Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
INT alaQoSAppliedConditionDestinationTcpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.79	INTEGER	read-only	Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionDestinationUdpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.84	Integer32	read-only	Destination UDP port range start to use for traffic classification.
I32 alaQoSAppliedConditionDestinationUdpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.86	Integer32	read-only	Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port.
INT alaQoSAppliedConditionDestinationUdpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.85	INTEGER	read-only	Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionDestinationVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.29	Integer32	read-only	Destination VLAN to use for traffic classification
INT alaQoSAppliedConditionDestinationVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.30	INTEGER	read-only	Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionDlci	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.68	Integer32	read-only	DLCI to use to traffic classification
INT alaQoSAppliedConditionDlciStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.69	INTEGER	read-only	Status field indicating whether the DLCI needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionDscp	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.51	Integer32	read-only	DSCP value to use for traffic classification
I32 alaQoSAppliedConditionDscpEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.110	Integer32	read-only	DSCP value to use for traffic classification
I32 alaQoSAppliedConditionDscpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.53	Integer32	read-only	DSCP mask to use for traffic classification
INT alaQoSAppliedConditionDscpStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.52	INTEGER	read-only	Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
alaQoSAppliedConditionEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1		not-accessible	Definition of QoS AppliedCondition
I32 alaQoSAppliedConditionEthertype	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.87	Integer32	read-only	Ethertype value to use for traffic classification
INT alaQoSAppliedConditionEthertypeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.88	INTEGER	read-only	Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionIcmpCode	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.66	Integer32	read-only	ICMP code to use for traffic classification
INT alaQoSAppliedConditionIcmpCodeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.67	INTEGER	read-only	Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionIcmpType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.64	Integer32	read-only	ICMP type to use for traffic classification
INT alaQoSAppliedConditionIcmpTypeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.65	INTEGER	read-only	Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionInner8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.113	Integer32	read-only	Customer 802.1p to use for traffic classification
I32 alaQoSAppliedConditionInner8021pEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.118	Integer32	read-create	Inner 802.1p range end value to use for traffic classification.
INT alaQoSAppliedConditionInner8021pStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.114	INTEGER	read-only	Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionInnerSourceVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.111	Integer32	read-only	Customer VLAN to use for traffic classification
STR alaQoSAppliedConditionInnerSourceVlanGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.121	DisplayString	read-create	Inner Source vlan group to use for traffic classification
INT alaQoSAppliedConditionInnerSourceVlanGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.122	INTEGER	read-create	Status field indicating whether to use for traffic classification (enabled) or not (disabled) for inner source vlan group.
INT alaQoSAppliedConditionInnerSourceVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.112	INTEGER	read-only	Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionIpProtocol	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.54	Integer32	read-only	IP protocol to use for traffic classification.
INT alaQoSAppliedConditionIpProtocolStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.55	INTEGER	read-only	Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionIpv6FlowLabel	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.105	Integer32	read-only	FL value to use for traffic classification
INT alaQoSAppliedConditionIpv6FlowLabelStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.106	INTEGER	read-only	Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionIpv6NH	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.103	Integer32	read-only	NH value to use for traffic classification
INT alaQoSAppliedConditionIpv6NHStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.104	INTEGER	read-only	Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
INT alaQoSAppliedConditionIpv6Traffic	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.102	INTEGER	read-only	classify IPV6 traffic
ADR alaQoSAppliedConditionMcastIpv6Addr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.107	Ipv6Address	read-create	Multicast IPv6 address to use for traffic classification
INT alaQoSAppliedConditionMcastIpv6AddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.108	INTEGER	read-create	Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
ADR alaQoSAppliedConditionMcastIpv6Mask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.109	Ipv6Address	read-create	Multicast IPv6 mask to use for traffic classification
IP alaQoSAppliedConditionMulticastIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.43	IpAddress	read-only	Multicast IP address to use for traffic classification
INT alaQoSAppliedConditionMulticastIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.44	INTEGER	read-only	Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
IP alaQoSAppliedConditionMulticastIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.45	IpAddress	read-only	Multicast IP mask to use for traffic classification
STR alaQoSAppliedConditionMulticastNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.46	DisplayString	read-only	Multicast network group to use for traffic classification
INT alaQoSAppliedConditionMulticastNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.47	INTEGER	read-only	Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
STR alaQoSAppliedConditionName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.1	DisplayString	not-accessible	Name of condition
ROW alaQoSAppliedConditionRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.70	RowStatus	read-only	Used to create/delete conditions according to the RowStatus convention
STR alaQoSAppliedConditionService	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.60	DisplayString	read-only	Name of service to use for traffic classification
STR alaQoSAppliedConditionServiceGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.62	DisplayString	read-only	Name of service group to use for traffic classification
INT alaQoSAppliedConditionServiceGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.63	INTEGER	read-only	Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
INT alaQoSAppliedConditionServiceStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.61	INTEGER	read-only	Status field indicating whether the service needs to be matched(enabled) or not(disabled).
INT alaQoSAppliedConditionSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.2	INTEGER	read-only	What entity created the condition.
INT alaQoSAppliedConditionSourceInterfaceType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.13	INTEGER	read-only	Source physical interface type to use for traffic classification
INT alaQoSAppliedConditionSourceInterfaceTypeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.14	INTEGER	read-only	Status field indicating whether the source physical interface type needs to be matched(enabled) or not(disabled).
IP alaQoSAppliedConditionSourceIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.33	IpAddress	read-only	Source IP address to use for traffic classification
INT alaQoSAppliedConditionSourceIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.34	INTEGER	read-only	Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
IP alaQoSAppliedConditionSourceIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.35	IpAddress	read-only	Source IP mask to use for traffic classification
I32 alaQoSAppliedConditionSourceIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.56	Integer32	read-only	Source IP port range start to use for traffic classification.
I32 alaQoSAppliedConditionSourceIpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.73	Integer32	read-only	Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
INT alaQoSAppliedConditionSourceIpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.57	INTEGER	read-only	Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
ADR alaQoSAppliedConditionSourceIpv6Addr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.96	Ipv6Address	read-only	Source IPv6 address to use for traffic classification
INT alaQoSAppliedConditionSourceIpv6AddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.97	INTEGER	read-only	Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
ADR alaQoSAppliedConditionSourceIpv6Mask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.98	Ipv6Address	read-only	Source IPv6 mask to use for traffic classification
MAC alaQoSAppliedConditionSourceMacAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.17	MacAddress	read-only	Source MAC address to use for traffic classification
INT alaQoSAppliedConditionSourceMacAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.18	INTEGER	read-only	Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
STR alaQoSAppliedConditionSourceMacGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.20	DisplayString	read-only	Source MAC group to use for traffic classification
INT alaQoSAppliedConditionSourceMacGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.21	INTEGER	read-only	Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
MAC alaQoSAppliedConditionSourceMacMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.19	MacAddress	read-only	Source MAC mask to use for traffic classification
STR alaQoSAppliedConditionSourceNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.36	DisplayString	read-only	Source network group to use for traffic classification
INT alaQoSAppliedConditionSourceNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.37	INTEGER	read-only	Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionSourcePort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.5	Integer32	read-only	Source physical port range start to use for traffic classification
I32 alaQoSAppliedConditionSourcePortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.71	Integer32	read-only	Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port.
STR alaQoSAppliedConditionSourcePortGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.6	DisplayString	read-only	Source physical port group to use for traffic classification
INT alaQoSAppliedConditionSourcePortGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.7	INTEGER	read-only	Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionSourceSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.3	Integer32	read-only	Source physical slot used for traffic classification When 0, the port identifies an aggregate
INT alaQoSAppliedConditionSourceSlotStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.4	INTEGER	read-only	Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionSourceTcpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.75	Integer32	read-only	Source TCP port range start to use for traffic classification.
I32 alaQoSAppliedConditionSourceTcpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.77	Integer32	read-only	Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
INT alaQoSAppliedConditionSourceTcpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.76	INTEGER	read-only	Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionSourceUdpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.81	Integer32	read-only	Source UDP port range start to use for traffic classification.
I32 alaQoSAppliedConditionSourceUdpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.83	Integer32	read-only	Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
INT alaQoSAppliedConditionSourceUdpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.82	INTEGER	read-only	Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionSourceVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.27	Integer32	read-only	Source VLAN to use for traffic classification
STR alaQoSAppliedConditionSourceVlanGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.119	DisplayString	read-create	Source vlan group to use for traffic classification
INT alaQoSAppliedConditionSourceVlanGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.120	INTEGER	read-create	Status field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group.
INT alaQoSAppliedConditionSourceVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.28	INTEGER	read-only	Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
alaQoSAppliedConditionTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4		not-accessible	Table of QoS AppliedCondition definitions
INT alaQoSAppliedConditionTcpEstablished	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.95	INTEGER	read-only	Look for established TCP sessions in classification
INT alaQoSAppliedConditionTcpFlags	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.89	INTEGER	read-only	Use any/all specifieid TCP flags for traffic classification
I32 alaQoSAppliedConditionTcpFlagsMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.93	Integer32	read-only	Mask of TCP flags bits used for traffic classification
INT alaQoSAppliedConditionTcpFlagsMaskStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.94	INTEGER	read-only	Not used
INT alaQoSAppliedConditionTcpFlagsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.90	INTEGER	read-only	Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedConditionTcpFlagsVal	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.91	Integer32	read-only	TCP flags values used for traffic classification
INT alaQoSAppliedConditionTcpFlagsValStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.92	INTEGER	read-only	Not used
I32 alaQoSAppliedConditionTos	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.48	Integer32	read-only	TOS value to use for traffic classification
I32 alaQoSAppliedConditionTosMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.50	Integer32	read-only	TOS mask to use for traffic classification
INT alaQoSAppliedConditionTosStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.49	INTEGER	read-only	Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
STR alaQoSAppliedConditionVrfName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.115	DisplayString	read-create	Name of Vrf to match traffic in
INT alaQoSAppliedConditionVrfNameStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.116	INTEGER	read-create	Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
alaQoSAppliedImportEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1		not-accessible	Definition of QoS AppliedImport
I32 alaQoSAppliedImportIndex	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.1	Integer32	not-accessible	Index of entry in import list
I32 alaQoSAppliedImportPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.6	Integer32	read-only	Starting port on which to apply imported policy(s)
I32 alaQoSAppliedImportPortend	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.7	Integer32	read-only	Ending port on which to apply imported policy(s)
STR alaQoSAppliedImportPortgroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.8	DisplayString	read-only	Portgroup on which to apply imported policy(s)
I32 alaQoSAppliedImportPrecedence	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.3	Integer32	read-only	Precedence to use for policies imported from file
STR alaQoSAppliedImportPrefix	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.4	DisplayString	read-only	Prefix for policy names that are imported
ROW alaQoSAppliedImportRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.9	RowStatus	read-only	Used to create/delete imports according to the RowStatus convention
I32 alaQoSAppliedImportSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.5	Integer32	read-only	Slot on which to apply imported policy(s)
alaQoSAppliedImportTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43		not-accessible	Table of QoS AppliedImport definitions
STR alaQoSAppliedImportText	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.43.1.2	DisplayString	not-accessible	Text or filename to import
alaQoSAppliedMACGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1		not-accessible	Definition of QoS AppliedMACGroup
MAC alaQoSAppliedMACGroupMacAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.1	MacAddress	not-accessible	MAC address for MAC group entry
MAC alaQoSAppliedMACGroupMacMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.2	MacAddress	not-accessible	MAC mask for MAC group entry
alaQoSAppliedMACGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1		not-accessible	Definition of QoS AppliedMACGroups
STR alaQoSAppliedMACGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.1	DisplayString	not-accessible	Name of MAC group
INT alaQoSAppliedMACGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.2	INTEGER	read-only	What entity created the MAC group.
ROW alaQoSAppliedMACGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.3	RowStatus	read-only	Used to create/delete MAC groups according to the RowStatus convention
alaQoSAppliedMACGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16		not-accessible	Table of QoS AppliedMACGroups definitions
ROW alaQoSAppliedMACGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.3	RowStatus	read-only	Used to create/delete MAC group entries according to the RowStatus convention
alaQoSAppliedMACGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18		not-accessible	Table of QoS AppliedMACGroup definitions
alaQoSAppliedMapGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1		not-accessible	Definition of QoS AppliedMapGroup
I32 alaQoSAppliedMapGroupKey	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.1	Integer32	not-accessible	Key range start of map group entry.
I32 alaQoSAppliedMapGroupKeyEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.2	Integer32	not-accessible	Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
alaQoSAppliedMapGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1		not-accessible	Definition of QoS AppliedMapGroups
STR alaQoSAppliedMapGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.1	DisplayString	not-accessible	Name of map group
INT alaQoSAppliedMapGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.2	INTEGER	read-only	What entity created the map group.
ROW alaQoSAppliedMapGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.3	RowStatus	read-only	Used to create/delete map groups according to the RowStatus convention
alaQoSAppliedMapGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24		not-accessible	Table of QoS AppliedMapGroups definitions
ROW alaQoSAppliedMapGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.4	RowStatus	read-only	Used to create/delete map group entries according to the RowStatus convention
alaQoSAppliedMapGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26		not-accessible	Table of QoS AppliedMapGroup definitions
I32 alaQoSAppliedMapGroupValue	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.3	Integer32	not-accessible	Value for map group entries. Value to stamp on traffic when keys in the proper range are seen.
alaQoSAppliedNetworkGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1		not-accessible	Definition of QoS AppliedNetworkGroup
IP alaQoSAppliedNetworkGroupIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.1	IpAddress	not-accessible	IP address for network group entry.
IP alaQoSAppliedNetworkGroupIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.2	IpAddress	not-accessible	IP mask for network group entry.
alaQoSAppliedNetworkGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1		not-accessible	Definition of QoS AppliedNetworkGroups
STR alaQoSAppliedNetworkGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.1	DisplayString	not-accessible	Name of network group
INT alaQoSAppliedNetworkGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.2	INTEGER	read-only	What entity created the network group.
ROW alaQoSAppliedNetworkGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.3	RowStatus	read-only	Used to create/delete network groups according to the RowStatus convention
alaQoSAppliedNetworkGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12		not-accessible	Table of QoS AppliedNetworkGroups definitions
ROW alaQoSAppliedNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.3	RowStatus	read-only	Used to create/delete network group entries according to the RowStatus convention
alaQoSAppliedNetworkGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14		not-accessible	Table of QoS AppliedNetworkGroup definitions
alaQoSAppliedPortGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1		not-accessible	Definition of QoS AppliedPortGroup
I32 alaQoSAppliedPortGroupPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.2	Integer32	not-accessible	Physical port range start for port group entry
I32 alaQoSAppliedPortGroupPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.4	Integer32	not-accessible	Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
alaQoSAppliedPortGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1		not-accessible	Definition of QoS AppliedPortGroups
I32 alaQoSAppliedPortGroupSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.1	Integer32	not-accessible	Physical slot for port group entry
STR alaQoSAppliedPortGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.1	DisplayString	not-accessible	Name of port group
INT alaQoSAppliedPortGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.2	INTEGER	read-only	What entity created the port group.
ROW alaQoSAppliedPortGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.3	RowStatus	read-only	Used to create/delete port groups according to the RowStatus convention
alaQoSAppliedPortGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20		not-accessible	Table of QoS AppliedPortGroups definitions
ROW alaQoSAppliedPortGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.3	RowStatus	read-only	Used to create/delete port group entries according to the RowStatus convention
alaQoSAppliedPortGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22		not-accessible	Table of QoS AppliedPortGroup definitions
STR alaQoSAppliedRuleAction	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.6	DisplayString	read-only	Name of the action to use
INT alaQoSAppliedRuleActive	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.12	INTEGER	read-only	Is this rule enforcable by the switch.
C64 alaQoSAppliedRuleByteCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.19	Counter64	read-only	Counter for bytes matching this rule
STR alaQoSAppliedRuleCondition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.5	DisplayString	read-only	Name of the condition to use
INT alaQoSAppliedRuleCountType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.17	INTEGER	read-only	Which rule statistics counters to update if not all are available
INT alaQoSAppliedRuleDefaultList	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.24	INTEGER	read-create	This rule belongs to the default policy list.
INT alaQoSAppliedRuleEnabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.2	INTEGER	read-only	Is this rule enabled or not
INT alaQoSAppliedRuleEnforced	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.11	INTEGER	read-only	Is this rule currenly being enforced on the switch.
alaQoSAppliedRuleEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1		not-accessible	Definition of QoS AppliedRule
C64 alaQoSAppliedRuleExcessByteCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.21	Counter64	read-only	Counter for bytes out of bandwidth parameters
C64 alaQoSAppliedRuleExcessPacketCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.20	Counter64	read-only	Counter for packets out of bandwidth parameters
C64 alaQoSAppliedRuleGreenCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.25	Counter64	read-only	Counter for the number of packets being green compliant.
C64 alaQoSAppliedRuleGroupByteCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.47.1.5	Counter64	read-only	Counter for bytes matching this rule
INT alaQoSAppliedRuleGroupCountType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.47.1.3	INTEGER	read-create	Which rule statistics counters to update if not all are available
alaQoSAppliedRuleGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.47.1		not-accessible	Definition of QoS AppliedRuleGroup
C32 alaQoSAppliedRuleGroupMatches	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.47.1.2	Counter32	read-only	Number of times this rule has been matched.
C64 alaQoSAppliedRuleGroupPacketCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.47.1.4	Counter64	read-only	Counter for packets patching this rule
STR alaQoSAppliedRuleGroupRuleName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.47.1.1	DisplayString	not-accessible	Name of rule in rule group entry
INT alaQoSAppliedRuleGroupsEnabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.45.1.4	INTEGER	read-create	Is this rule grop enabled or not
alaQoSAppliedRuleGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.45.1		not-accessible	Definition of QoS AppliedRuleGroups
STR alaQoSAppliedRuleGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.45.1.1	DisplayString	not-accessible	Name of rule group
INT alaQoSAppliedRuleGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.45.1.2	INTEGER	read-create	What entity created the service group.
ROW alaQoSAppliedRuleGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.45.1.5	RowStatus	read-only	Used to create/delete rule groups according to the RowStatus convention
alaQoSAppliedRuleGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.45		not-accessible	Table of QoS AppliedRuleGroups definitions
ROW alaQoSAppliedRuleGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.47.1.6	RowStatus	read-only	Used to create/delete rule group entries according to the RowStatus convention
INT alaQoSAppliedRuleGroupsType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.45.1.3	INTEGER	read-only	What entity created the rule group.
alaQoSAppliedRuleGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.47		not-accessible	Table of QoS AppliedRuleGroup definitions
INT alaQoSAppliedRuleLog	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.9	INTEGER	read-only	Indicator to tell whether to log matches to this rule in the QoS log.
I32 alaQoSAppliedRuleLogInterval	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.16	Integer32	read-only	How often to look for packets matching this rule when logging. When 0 log as many as possible.
C32 alaQoSAppliedRuleMatches	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.10	Counter32	read-only	Number of times this rule has been matched.
STR alaQoSAppliedRuleName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.1	DisplayString	not-accessible	Name of rule
C64 alaQoSAppliedRuleNonGreenCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.28	Counter64	read-only	Counter for the number of packets being non-green compliant.
C64 alaQoSAppliedRuleNonRedCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.29	Counter64	read-only	Counter for the number of packets being non-red compliant.
C64 alaQoSAppliedRulePacketCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.18	Counter64	read-only	Counter for packets patching this rule
I32 alaQoSAppliedRulePrecedence	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.4	Integer32	read-only	Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received.
C64 alaQoSAppliedRuleRedCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.27	Counter64	read-only	Counter for the number of packets being red compliant.
INT alaQoSAppliedRuleReflexive	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.7	INTEGER	read-only	Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
ROW alaQoSAppliedRuleRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.13	RowStatus	read-only	Used to create/delete rules according to the RowStatus convention
INT alaQoSAppliedRuleSave	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.8	INTEGER	read-only	Indicator to tell whether to write out the rule during snapshot commands.
INT alaQoSAppliedRuleSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.3	INTEGER	read-only	What entity created the rule.
alaQoSAppliedRuleTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2		not-accessible	Table of QoS AppliedRule definitions
INT alaQoSAppliedRuleTrapEvents	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.23	INTEGER	read-create	Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
I32 alaQoSAppliedRuleType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.22	Integer32	read-only	The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
STR alaQoSAppliedRuleValidityPeriod	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.14	DisplayString	read-only	Name of the validity period to use
INT alaQoSAppliedRuleValidityPeriodStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.15	INTEGER	read-only	Status field indicating whether there is a validity period associated with this rule
C64 alaQoSAppliedRuleYellowCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.26	Counter64	read-only	Counter for the number of packets being yellow compliant.
I32 alaQoSAppliedServiceDestinationIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.6	Integer32	read-only	Destination IP port range start to use for traffic classification.
I32 alaQoSAppliedServiceDestinationIpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.10	Integer32	read-only	Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
INT alaQoSAppliedServiceDestinationIpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.7	INTEGER	read-only	Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedServiceDestinationTcpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.14	Integer32	read-only	Destination TCP port range start to use for traffic classification.
I32 alaQoSAppliedServiceDestinationTcpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.16	Integer32	read-only	Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
INT alaQoSAppliedServiceDestinationTcpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.15	INTEGER	read-only	Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedServiceDestinationUdpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.20	Integer32	read-only	Destination UDP port range start to use for traffic classification.
I32 alaQoSAppliedServiceDestinationUdpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.22	Integer32	read-only	Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port.
INT alaQoSAppliedServiceDestinationUdpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.21	INTEGER	read-only	Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
alaQoSAppliedServiceEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1		not-accessible	Definition of QoS AppliedService
alaQoSAppliedServiceGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1		not-accessible	Definition of QoS AppliedServiceGroup
alaQoSAppliedServiceGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1		not-accessible	Definition of QoS AppliedServiceGroups
STR alaQoSAppliedServiceGroupServiceName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.1	DisplayString	not-accessible	Name of service in service group entry
STR alaQoSAppliedServiceGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.1	DisplayString	not-accessible	Name of service group
INT alaQoSAppliedServiceGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.2	INTEGER	read-only	What entity created the service group.
ROW alaQoSAppliedServiceGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.3	RowStatus	read-only	Used to create/delete service groups according to the RowStatus convention
alaQoSAppliedServiceGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8		not-accessible	Table of QoS AppliedServiceGroups definitions
ROW alaQoSAppliedServiceGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.2	RowStatus	read-only	Used to create/delete service group entries according to the RowStatus convention
alaQoSAppliedServiceGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10		not-accessible	Table of QoS AppliedServiceGroup definitions
STR alaQoSAppliedServiceName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.1	DisplayString	not-accessible	Name of the service
I32 alaQoSAppliedServiceProtocol	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.3	Integer32	read-only	protocol field for AppliedService
ROW alaQoSAppliedServiceRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.8	RowStatus	read-only	Used to create/delete services according to the RowStatus convention
INT alaQoSAppliedServiceSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.2	INTEGER	read-only	What entity created the service.
I32 alaQoSAppliedServiceSourceIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.4	Integer32	read-only	Source IP port range start to use for traffic classification.
I32 alaQoSAppliedServiceSourceIpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.9	Integer32	read-only	Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
INT alaQoSAppliedServiceSourceIpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.5	INTEGER	read-only	Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedServiceSourceTcpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.11	Integer32	read-only	Source TCP port range start to use for traffic classification.
I32 alaQoSAppliedServiceSourceTcpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.13	Integer32	read-only	Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
INT alaQoSAppliedServiceSourceTcpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.12	INTEGER	read-only	Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSAppliedServiceSourceUdpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.17	Integer32	read-only	Source UDP port range start to use for traffic classification.
I32 alaQoSAppliedServiceSourceUdpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.19	Integer32	read-only	Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
INT alaQoSAppliedServiceSourceUdpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.18	INTEGER	read-only	Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
alaQoSAppliedServiceTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6		not-accessible	Table of QoS AppliedService definitions
I32 alaQoSAppliedValidityPeriodDays	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.3	Integer32	read-only	Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
INT alaQoSAppliedValidityPeriodDaysStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.4	INTEGER	read-only	Status field indicating whether the validity period has specific active days of the month.
STR alaQoSAppliedValidityPeriodEndHour	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.9	DisplayString	read-only	Time of day this period becomes inactive. Format is 'hh:mm'
STR alaQoSAppliedValidityPeriodEndInterval	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.12	DisplayString	read-only	Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
alaQoSAppliedValidityPeriodEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1		not-accessible	Definition of QoS AppliedValidityPeriod
STR alaQoSAppliedValidityPeriodHour	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.7	DisplayString	read-only	Time of day this period becomes active. Format is 'hh:mm'
INT alaQoSAppliedValidityPeriodHourStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.8	INTEGER	read-only	Status field indicating whether the validity period has specific active hours of the day.
STR alaQoSAppliedValidityPeriodInterval	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.10	DisplayString	read-only	Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
INT alaQoSAppliedValidityPeriodIntervalStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.11	INTEGER	read-only	Status field indicating whether the validity period has a specific active date-time interval.
I32 alaQoSAppliedValidityPeriodMonths	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.5	Integer32	read-only	Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
INT alaQoSAppliedValidityPeriodMonthsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.6	INTEGER	read-only	Status field indicating whether the validity period has specific active days of the week.
STR alaQoSAppliedValidityPeriodName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.1	DisplayString	not-accessible	Name of validity period
ROW alaQoSAppliedValidityPeriodRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.13	RowStatus	read-only	Used to create/delete validity periods according to the RowStatus convention
INT alaQoSAppliedValidityPeriodSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.2	INTEGER	read-only	What entity created the validity period.
alaQoSAppliedValidityPeriodTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41		not-accessible	Table of QoS AppliedValidityPeriod definitions
alaQoSAppliedVlanGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.51.1		not-accessible	Definition of QoS Applied Vlan Group
alaQoSAppliedVlanGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.42			Collections of objects providing applied QoS Vlan Groups definitions.
alaQoSAppliedVlanGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.49.1		not-accessible	Definition of QoS Applied Vlan Groups
STR alaQoSAppliedVlanGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.49.1.1	DisplayString	not-accessible	Name of Applied Vlan group
alaQoSAppliedVlanGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.40			Collections of objects providing applied QoS Vlan Groups definitions.
INT alaQoSAppliedVlanGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.49.1.2	INTEGER	read-create	What entity created the Vlan group.
ROW alaQoSAppliedVlanGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.49.1.3	RowStatus	read-create	Used to create/delete Vlan groups according to the RowStatus convention
alaQoSAppliedVlanGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.49		not-accessible	Table of QoS Applied Vlan Groups definitions
ROW alaQoSAppliedVlanGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.51.1.3	RowStatus	read-create	Used to create/delete vlan group entries according to the RowStatus convention
alaQoSAppliedVlanGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.51		not-accessible	Table of QoS Applied Vlan Group definitions
I32 alaQoSAppliedVlanGroupVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.51.1.1	Integer32	not-accessible	Vlan range start for vlan group entry
I32 alaQoSAppliedVlanGroupVlanEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.51.1.2	Integer32	not-accessible	Vlan range end for vlan group entry
alaQoSClassify	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34
I32 alaQoSClassify8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.13	Integer32	read-write	802.1p value to submit when testing classifier.
INT alaQoSClassifyApplied	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.2	INTEGER	read-write	What set of policies QoS uses when testing the classifier. When yes(1) the applied policies are used. When no(2) the pending policies are used.
INT alaQoSClassifyClassify	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1	INTEGER	read-write	Which classification routine to run on the sample packet
INT alaQoSClassifyDestinationInterfaceType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.8	INTEGER	read-write	Destination interface type to submit when testing classifier.
IP alaQoSClassifyDestinationIp	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.15	IpAddress	read-write	Destination IP address to submit when testing classifier.
I32 alaQoSClassifyDestinationIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.21	Integer32	read-write	Destination IP port to submit when testing classifier.
MAC alaQoSClassifyDestinationMac	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.10	MacAddress	read-write	Destination MAC address to submit when testing classifier.
I32 alaQoSClassifyDestinationPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.7	Integer32	read-write	Destination physical port to submit when testing classifier.
I32 alaQoSClassifyDestinationSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.6	Integer32	read-write	Destination physical slot to submit when testing classifier.
I32 alaQoSClassifyDestinationVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.12	Integer32	read-write	Destination VLAN to submit when testing classifier.
I32 alaQoSClassifyDscp	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.18	Integer32	read-write	DSCP value to submit when testing classifier.
INT alaQoSClassifyExecute	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.22	INTEGER	read-write	Writing to this field tells QoS to run the classifier on the current packet headers. The classifier stores the results in result fields. The next 'set' to the table will clear all fields before actually performing the set.
INT alaQoSClassifyIGMPResultDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.30	INTEGER	read-only	Result disposition for IGMP
STR alaQoSClassifyIGMPResultRule	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.29	DisplayString	read-only	Matching rule for IGMP request
I32 alaQoSClassifyIpProtocol	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.19	Integer32	read-write	IP protocol value to submit when testing classifier.
INT alaQoSClassifyL2DestinationResultDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.26	INTEGER	read-only	Result disposition for L2 (destination)
STR alaQoSClassifyL2DestinationResultRule	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.25	DisplayString	read-only	Matching rule for L2 (destination)
INT alaQoSClassifyL2SourceResultDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.24	INTEGER	read-only	Result disposition for L2 (source)
STR alaQoSClassifyL2SourceResultRule	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.23	DisplayString	read-only	Matching rule for L2 (source)
INT alaQoSClassifyL3ResultDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.28	INTEGER	read-only	Result disposition for L3
STR alaQoSClassifyL3ResultRule	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.27	DisplayString	read-only	Matching rule for L3
IP alaQoSClassifyMulticastIp	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.16	IpAddress	read-write	Multicast IP address to submit when testing classifier.
INT alaQoSClassifyMulticastResultDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.32	INTEGER	read-only	Result disposition for multicast
STR alaQoSClassifyMulticastResultRule	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.31	DisplayString	read-only	Matching rule for multicast
INT alaQoSClassifySourceInterfaceType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.5	INTEGER	read-write	Source interface type to submit when testing classifier.
IP alaQoSClassifySourceIp	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.14	IpAddress	read-write	Source IP address to submit when testing classifier.
I32 alaQoSClassifySourceIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.20	Integer32	read-write	Source IP port to submit when testing classifier.
MAC alaQoSClassifySourceMac	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.9	MacAddress	read-write	Source MAC address to submit when testing classifier.
I32 alaQoSClassifySourcePort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.4	Integer32	read-write	Source physical port to submit when testing classifier.
I32 alaQoSClassifySourceSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.3	Integer32	read-write	Source physical slot to submit when testing classifier.
I32 alaQoSClassifySourceVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.11	Integer32	read-write	Source VLAN to submit when testing classifier.
I32 alaQoSClassifyTos	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.17	Integer32	read-write	TOS value to submit when testing classifier.
I32 alaQoSCondition8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.31	Integer32	read-create	802.1p value to use for traffic classification
I32 alaQoSCondition8021pEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.117	Integer32	read-create	802.1p range end value to use for traffic classification.
INT alaQoSCondition8021pStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.32	INTEGER	read-create	Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
INT alaQoSConditionDestinationInterfaceType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.15	INTEGER	read-create	Destination physical interface type to use for traffic classification
INT alaQoSConditionDestinationInterfaceTypeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.16	INTEGER	read-create	Status field indicating whether the destination physical interface type needs to be matched(enabled) or not(disabled).
IP alaQoSConditionDestinationIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.38	IpAddress	read-create	Destination IP address to use for traffic classification
INT alaQoSConditionDestinationIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.39	INTEGER	read-create	Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
IP alaQoSConditionDestinationIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.40	IpAddress	read-create	Destination IP mask to use for traffic classification
I32 alaQoSConditionDestinationIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.58	Integer32	read-create	Destination IP port range start to use for traffic classification.
I32 alaQoSConditionDestinationIpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.74	Integer32	read-create	Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
INT alaQoSConditionDestinationIpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.59	INTEGER	read-create	Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
ADR alaQoSConditionDestinationIpv6Addr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.99	Ipv6Address	read-create	Destination IPv6 address to use for traffic classification
INT alaQoSConditionDestinationIpv6AddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.100	INTEGER	read-create	Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
ADR alaQoSConditionDestinationIpv6Mask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.101	Ipv6Address	read-create	Destination IPv6 mask to use for traffic classification
MAC alaQoSConditionDestinationMacAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.22	MacAddress	read-create	Destination MAC address to use for traffic classification
INT alaQoSConditionDestinationMacAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.23	INTEGER	read-create	Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
STR alaQoSConditionDestinationMacGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.25	DisplayString	read-create	Destination MAC group to use for traffic classification
INT alaQoSConditionDestinationMacGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.26	INTEGER	read-create	Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
MAC alaQoSConditionDestinationMacMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.24	MacAddress	read-create	Destination MAC mask to use for traffic classification
STR alaQoSConditionDestinationNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.41	DisplayString	read-create	Destination network group to use for traffic classification
INT alaQoSConditionDestinationNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.42	INTEGER	read-create	Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionDestinationPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.10	Integer32	read-create	Destination physical port range start to use for traffic classification
I32 alaQoSConditionDestinationPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.72	Integer32	read-create	Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port.
STR alaQoSConditionDestinationPortGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.11	DisplayString	read-create	Destination physical port group to use for traffic classification
INT alaQoSConditionDestinationPortGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.12	INTEGER	read-create	Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionDestinationSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.8	Integer32	read-create	Destination physical slot used for traffic classification When 0, the port identifies an aggregate
INT alaQoSConditionDestinationSlotStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.9	INTEGER	read-create	Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionDestinationTcpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.78	Integer32	read-create	Destination TCP port range start to use for traffic classification.
I32 alaQoSConditionDestinationTcpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.80	Integer32	read-create	Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
INT alaQoSConditionDestinationTcpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.79	INTEGER	read-create	Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionDestinationUdpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.84	Integer32	read-create	Destination UDP port range start to use for traffic classification.
I32 alaQoSConditionDestinationUdpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.86	Integer32	read-create	Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port.
INT alaQoSConditionDestinationUdpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.85	INTEGER	read-create	Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionDestinationVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.29	Integer32	read-create	Destination VLAN to use for traffic classification
INT alaQoSConditionDestinationVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.30	INTEGER	read-create	Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionDlci	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.68	Integer32	read-create	DLCI to use to traffic classification
INT alaQoSConditionDlciStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.69	INTEGER	read-create	Status field indicating whether the DLCI needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionDscp	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.51	Integer32	read-create	DSCP value to use for traffic classification
I32 alaQoSConditionDscpEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.110	Integer32	read-create	DSCP value to use for traffic classification
I32 alaQoSConditionDscpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.53	Integer32	read-create	DSCP mask to use for traffic classification
INT alaQoSConditionDscpStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.52	INTEGER	read-create	Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
alaQoSConditionEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1		not-accessible	Definition of QoS Condition
I32 alaQoSConditionEthertype	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.87	Integer32	read-create	Ethertype value to use for traffic classification
INT alaQoSConditionEthertypeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.88	INTEGER	read-create	Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionIcmpCode	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.66	Integer32	read-create	ICMP code to use for traffic classification
INT alaQoSConditionIcmpCodeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.67	INTEGER	read-create	Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionIcmpType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.64	Integer32	read-create	ICMP type to use for traffic classification
INT alaQoSConditionIcmpTypeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.65	INTEGER	read-create	Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionInner8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.113	Integer32	read-create	Customer 802.1p to use for traffic classification
I32 alaQoSConditionInner8021pEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.118	Integer32	read-create	Inner 802.1p range end value to use for traffic classification.
INT alaQoSConditionInner8021pStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.114	INTEGER	read-create	Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionInnerSourceVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.111	Integer32	read-create	Customer VLAN to use for traffic classification
STR alaQoSConditionInnerSourceVlanGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.121	DisplayString	read-create	Inner Source vlan group to use for traffic classification
INT alaQoSConditionInnerSourceVlanGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.122	INTEGER	read-create	Status field indicating whether to use for traffic classification (enabled) or not (disabled) for inner source vlan group.
INT alaQoSConditionInnerSourceVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.112	INTEGER	read-create	Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionIpProtocol	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.54	Integer32	read-create	IP protocol to use for traffic classification.
INT alaQoSConditionIpProtocolStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.55	INTEGER	read-create	Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionIpv6FlowLabel	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.105	Integer32	read-create	FL value to use for traffic classification
INT alaQoSConditionIpv6FlowLabelStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.106	INTEGER	read-create	Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionIpv6NH	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.103	Integer32	read-create	NH value to use for traffic classification
INT alaQoSConditionIpv6NHStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.104	INTEGER	read-create	Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
INT alaQoSConditionIpv6Traffic	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.102	INTEGER	read-create	classify IPV6 traffic
ADR alaQoSConditionMcastIpv6Addr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.107	Ipv6Address	read-create	Multicast IPv6 address to use for traffic classification
INT alaQoSConditionMcastIpv6AddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.108	INTEGER	read-create	Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
ADR alaQoSConditionMcastIpv6Mask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.109	Ipv6Address	read-create	Multicast IPv6 mask to use for traffic classification
IP alaQoSConditionMulticastIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.43	IpAddress	read-create	Multicast IP address to use for traffic classification
INT alaQoSConditionMulticastIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.44	INTEGER	read-create	Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
IP alaQoSConditionMulticastIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.45	IpAddress	read-create	Multicast IP mask to use for traffic classification
STR alaQoSConditionMulticastNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.46	DisplayString	read-create	Multicast network group to use for traffic classification
INT alaQoSConditionMulticastNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.47	INTEGER	read-create	Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
STR alaQoSConditionName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.1	DisplayString	not-accessible	Name of condition
ROW alaQoSConditionRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.70	RowStatus	read-create	Used to create/delete conditions according to the RowStatus convention
STR alaQoSConditionService	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.60	DisplayString	read-create	Name of service to use for traffic classification
STR alaQoSConditionServiceGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.62	DisplayString	read-create	Name of service group to use for traffic classification
INT alaQoSConditionServiceGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.63	INTEGER	read-create	Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
INT alaQoSConditionServiceStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.61	INTEGER	read-create	Status field indicating whether the service needs to be matched(enabled) or not(disabled).
INT alaQoSConditionSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.2	INTEGER	read-create	What entity created the condition.
INT alaQoSConditionSourceInterfaceType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.13	INTEGER	read-create	Source physical interface type to use for traffic classification
INT alaQoSConditionSourceInterfaceTypeStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.14	INTEGER	read-create	Status field indicating whether the source physical interface type needs to be matched(enabled) or not(disabled).
IP alaQoSConditionSourceIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.33	IpAddress	read-create	Source IP address to use for traffic classification
INT alaQoSConditionSourceIpAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.34	INTEGER	read-create	Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
IP alaQoSConditionSourceIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.35	IpAddress	read-create	Source IP mask to use for traffic classification
I32 alaQoSConditionSourceIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.56	Integer32	read-create	Source IP port range start to use for traffic classification.
I32 alaQoSConditionSourceIpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.73	Integer32	read-create	Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
INT alaQoSConditionSourceIpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.57	INTEGER	read-create	Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
ADR alaQoSConditionSourceIpv6Addr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.96	Ipv6Address	read-create	Source IPv6 address to use for traffic classification
INT alaQoSConditionSourceIpv6AddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.97	INTEGER	read-create	Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
ADR alaQoSConditionSourceIpv6Mask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.98	Ipv6Address	read-create	Source IPv6 mask to use for traffic classification
MAC alaQoSConditionSourceMacAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.17	MacAddress	read-create	Source MAC address to use for traffic classification
INT alaQoSConditionSourceMacAddrStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.18	INTEGER	read-create	Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
STR alaQoSConditionSourceMacGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.20	DisplayString	read-create	Source MAC group to use for traffic classification
INT alaQoSConditionSourceMacGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.21	INTEGER	read-create	Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
MAC alaQoSConditionSourceMacMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.19	MacAddress	read-create	Source MAC mask to use for traffic classification
STR alaQoSConditionSourceNetworkGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.36	DisplayString	read-create	Source network group to use for traffic classification
INT alaQoSConditionSourceNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.37	INTEGER	read-create	Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionSourcePort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.5	Integer32	read-create	Source physical port range start to use for traffic classification
I32 alaQoSConditionSourcePortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.71	Integer32	read-create	Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port.
STR alaQoSConditionSourcePortGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.6	DisplayString	read-create	Source physical port group to use for traffic classification
INT alaQoSConditionSourcePortGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.7	INTEGER	read-create	Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionSourceSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.3	Integer32	read-create	Source physical slot used for traffic classification When 0, the port identifies an aggregate
INT alaQoSConditionSourceSlotStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.4	INTEGER	read-create	Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionSourceTcpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.75	Integer32	read-create	Source TCP port range start to use for traffic classification.
I32 alaQoSConditionSourceTcpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.77	Integer32	read-create	Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
INT alaQoSConditionSourceTcpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.76	INTEGER	read-create	Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionSourceUdpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.81	Integer32	read-create	Source UDP port range start to use for traffic classification.
I32 alaQoSConditionSourceUdpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.83	Integer32	read-create	Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
INT alaQoSConditionSourceUdpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.82	INTEGER	read-create	Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionSourceVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.27	Integer32	read-create	Source VLAN to use for traffic classification
STR alaQoSConditionSourceVlanGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.119	DisplayString	read-create	Source vlan group to use for traffic classification
INT alaQoSConditionSourceVlanGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.120	INTEGER	read-create	Status field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group.
INT alaQoSConditionSourceVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.28	INTEGER	read-create	Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
alaQoSConditionTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3		not-accessible	Table of QoS Condition definitions
INT alaQoSConditionTcpEstablished	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.95	INTEGER	read-create	Look for established TCP sessions in classification
INT alaQoSConditionTcpFlags	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.89	INTEGER	read-create	Use any/all specifieid TCP flags for traffic classification
I32 alaQoSConditionTcpFlagsMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.93	Integer32	read-create	Mask of TCP flags bits used for traffic classification
INT alaQoSConditionTcpFlagsMaskStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.94	INTEGER	read-create	Not used
INT alaQoSConditionTcpFlagsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.90	INTEGER	read-create	Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
I32 alaQoSConditionTcpFlagsVal	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.91	Integer32	read-create	TCP flags values used for traffic classification
INT alaQoSConditionTcpFlagsValStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.92	INTEGER	read-create	Not used
I32 alaQoSConditionTos	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.48	Integer32	read-create	TOS value to use for traffic classification
I32 alaQoSConditionTosMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.50	Integer32	read-create	TOS mask to use for traffic classification
INT alaQoSConditionTosStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.49	INTEGER	read-create	Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
STR alaQoSConditionVrfName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.115	DisplayString	read-create	Name of Vrf to match traffic in
INT alaQoSConditionVrfNameStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.116	INTEGER	read-create	Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
alaQoSConfig	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30
INT alaQoSConfigAppliedClassifyFragments	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.16	INTEGER	read-only	Current indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
INT alaQoSConfigAppliedClassifyl3Bridged	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.14	INTEGER	read-only	Current indicator for looking at L3/L4 parameters of bridged traffic.
INT alaQoSConfigAppliedDefaultBridgedDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.18	INTEGER	read-only	Current disposition of bridged traffic that doesn't match a policy.
INT alaQoSConfigAppliedDefaultMulticastDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.22	INTEGER	read-only	Current disposition of IGMP requests that don't match a policy
I32 alaQoSConfigAppliedDefaultQueues	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.3	Integer32	read-only	Number of default queues configured at last 'Apply' command.
INT alaQoSConfigAppliedDefaultRoutedDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.20	INTEGER	read-only	Current disposition of routed traffic that doesn't match a policy
I32 alaQoSConfigAppliedFlowTimeout	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.6	Integer32	read-only	Current flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds.
I32 alaQoSConfigAppliedFragmentTimeout	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.8	Integer32	read-only	Current fragment timeout (seconds). Packet fragments are remembered for this many seconds.
I32 alaQoSConfigAppliedNatTimeout	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.12	Integer32	read-only	Current nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in either direction.
I32 alaQoSConfigAppliedReflfexiveTimeout	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.10	Integer32	read-only	Current reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response.
I32 alaQoSConfigAppliedUserportFilter	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.45	Integer32	read-only	Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024
I32 alaQoSConfigAppliedUserportShutdown	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.47	Integer32	read-only	Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024
INT alaQoSConfigApply	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.29	INTEGER	read-write	Set to apply all pending QoS configuration/policy changes
INT alaQoSConfigAutoNMS	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.48	INTEGER	read-write	Flag to indicate whether to Prioritize NMS traffic by default.
INT alaQoSConfigAutoPhones	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.49	INTEGER	read-write	Auto configure CSBU Phones pri0-7 - will replace the priority. trusted - will allow priority from the orginator to be used. disable - will unconfigure to feature.
INT alaQoSConfigClassifyFragments	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.15	INTEGER	read-write	Pending indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
INT alaQoSConfigClassifyl3Bridged	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.13	INTEGER	read-write	Pending indicator for looking at L3/L4 parameters of bridged traffic. Does not take effect until an 'Apply' command is issued.
INT alaQoSConfigClearLog	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.28	INTEGER	read-write	Clear the QoS log
I32 alaQoSConfigDebug	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.34	Integer32	read-write	Possible debug flags for QoS
INT alaQoSConfigDefaultBridgedDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.17	INTEGER	read-write	Pending disposition of bridged traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
INT alaQoSConfigDefaultMulticastDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.21	INTEGER	read-write	Pending disposition of IGMP requests that don't match a policy Does not take effect until an 'Apply' command is issued
I32 alaQoSConfigDefaultQueues	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.2	Integer32	read-write	Pending number of default queues to create for each port. Can be overridden on a port by port basis. Does not take affect until an 'Apply' command is issued.
INT alaQoSConfigDefaultRoutedDisposition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.19	INTEGER	read-write	Pending disposition of routed traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
INT alaQoSConfigDEIMapping	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.53	INTEGER	read-create	This object specifies, in ingress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow color if that bit is set. disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow color.
INT alaQoSConfigDEIMarking	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.54	INTEGER	read-create	This object specifies, in egress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow color if that bit is set. disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow color.
INT alaQoSConfigEnabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.1	INTEGER	read-write	Is QoS enabled on the switch
I32 alaQoSConfigFlowTimeout	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.5	Integer32	read-write	Pending flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds. Does not take effect until an 'Apply' command is issued
INT alaQoSConfigFlush	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.33	INTEGER	read-write	Flush all pending policy objects
INT alaQoSConfigForwardLog	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.27	INTEGER	read-write	Whether QoS forwards logging events to PolicyManager
I32 alaQoSConfigFragmentTimeout	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.7	Integer32	read-write	Pending fragment timeout (seconds). Packet fragments are remembered for this many seconds. Does not take effect until an 'Apply' command is issued
I32 alaQoSConfigHighPriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.38	Integer32	read-create	Weight to use for high priority queue(2) on fixed queue blades
INT alaQoSConfigLogConsole	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.26	INTEGER	read-write	Whether QoS log events are logged to the console
I32 alaQoSConfigLogLevel	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.25	Integer32	read-write	The level of logging desired. The higher the level, the more verbose the logging
I32 alaQoSConfigLogLines	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.24	Integer32	read-write	Number of log lines to maintain in the QoS log
I32 alaQoSConfigLowPriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.36	Integer32	read-create	Weight to use for low priority queue(0) on fixed queue blades
I32 alaQoSConfigMediumPriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.37	Integer32	read-create	Weight to use for medium priority queue(1) on fixed queue blades
I32 alaQoSConfigNatTimeout	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.11	Integer32	read-write	Pending nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in either direction. Does not take effect until an 'Apply' command is issued
I32 alaQoSConfigQ4PriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.40	Integer32	read-create	Weight to use for COS 4 priority queue(4) on fixed queue blades
I32 alaQoSConfigQ5PriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.41	Integer32	read-create	Weight to use for COS 5 priority queue(5) on fixed queue blades
I32 alaQoSConfigQ6PriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.42	Integer32	read-create	Weight to use for COS 6 priority queue(6) on fixed queue blades
I32 alaQoSConfigQ7PriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.43	Integer32	read-create	Weight to use for COS 7 priority queue(7) on fixed queue blades
STR alaQoSConfigQMMACGroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.51	DisplayString	read-write	Group name for quarantine manager quarantined MACs.
INT alaQoSConfigQMPage	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.50	INTEGER	read-write	Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified.
STR alaQoSConfigQMPath	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.52	DisplayString	read-write	Default path for remediation server redirect.
I32 alaQoSConfigReflexiveTimeout	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.9	Integer32	read-write	Pending reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response. Does not take effect until an 'Apply' command is issued
INT alaQoSConfigReset	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.31	INTEGER	read-write	Set to reset global QoS configuration parameters to their default values
INT alaQoSConfigRevert	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.30	INTEGER	read-write	Set to revert all pending QoS configuration/policy changes
INT alaQoSConfigServicingMode	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.35	INTEGER	read-create	Servicing mode for the system
I32 alaQoSConfigStatsInterval	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.23	Integer32	read-write	Interval in seconds for how often statistics are updated
INT alaQoSConfigStatsReset	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.32	INTEGER	read-write	Set to reset global QoS statistics counters
INT alaQoSConfigStatsResetEgress	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.55	INTEGER	read-write	Set to reset global Egress QoS statistics counters
INT alaQoSConfigTrustPorts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.4	INTEGER	read-write	Flag to indicate whether to trust the 802.1p/TOS values on incoming traffic by default. Can be overridden on a port by port basis.
I32 alaQoSConfigUrgentPriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.39	Integer32	read-create	Weight to use for urgent priority queue(3) on fixed queue blades
I32 alaQoSConfigUserportFilter	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.44	Integer32	read-create	Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024
I32 alaQoSConfigUserportShutdown	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.46	Integer32	read-create	Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024
MAC alaQoSHwLoopbackDestinationMac	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1.3	MacAddress	read-create	Destination MAC address to use for Hardware Loopback profile configuration
NUM alaQoSHwLoopbackPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1.5	InterfaceIndex	read-create	Loopback Port ifindex used in Hardware Loopback Profile Config
alaQoSHwLoopbackProfileEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1		not-accessible	Definition of QoS Hw Loopback Profiles
STR alaQoSHwLoopbackProfileName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1.1	DisplayString	not-accessible	Name of Profile Name
ROW alaQoSHwLoopbackProfileRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1.8	RowStatus	read-create	Used to create/delete the Profile Config
INT alaQoSHwLoopbackProfileStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1.7	INTEGER	read-create	The status of the Hardware Profile Config
alaQoSHwLoopbackProfileTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52		not-accessible	Table of QoS Hw Loopback Profiles
MAC alaQoSHwLoopbackSourceMac	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1.2	MacAddress	read-create	Source MAC address to use for Hardware Loopback profile configuration
INT alaQoSHwLoopbackType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1.6	INTEGER	read-create	The type of Hardware Profile Config, inward and outward
I32 alaQoSHwLoopbackVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.52.1.4	Integer32	read-create	Vlan used in Hardware Loopback Profile Config
alaQoSImportEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1		not-accessible	Definition of QoS Import
I32 alaQoSImportIndex	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.1	Integer32	not-accessible	Index of entry in import list
I32 alaQoSImportPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.6	Integer32	read-create	Starting port on which to apply imported policy(s)
I32 alaQoSImportPortend	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.7	Integer32	read-create	Ending port on which to apply imported policy(s)
STR alaQoSImportPortgroup	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.8	DisplayString	read-create	Portgroup on which to apply imported policy(s)
I32 alaQoSImportPrecedence	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.3	Integer32	read-create	Precedence to use for policies imported from file
STR alaQoSImportPrefix	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.4	DisplayString	read-create	Prefix for policy names that are imported
ROW alaQoSImportRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.9	RowStatus	read-create	Used to create/delete imports according to the RowStatus convention
I32 alaQoSImportSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.5	Integer32	read-create	Slot on which to apply imported policy(s)
alaQoSImportTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42		not-accessible	Table of QoS Import definitions
STR alaQoSImportText	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.42.1.2	DisplayString	not-accessible	Text or filename to import
alaQoSMACGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1		not-accessible	Definition of QoS MACGroup
MAC alaQoSMACGroupMacAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.1	MacAddress	not-accessible	MAC address for MAC group entry
MAC alaQoSMACGroupMacMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.2	MacAddress	not-accessible	MAC mask for MAC group entry
alaQoSMACGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1		not-accessible	Definition of QoS MACGroups
STR alaQoSMACGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.1	DisplayString	not-accessible	Name of MAC group
INT alaQoSMACGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.2	INTEGER	read-create	What entity created the MAC group.
ROW alaQoSMACGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.3	RowStatus	read-create	Used to create/delete MAC groups according to the RowStatus convention
alaQoSMACGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15		not-accessible	Table of QoS MACGroups definitions
ROW alaQoSMACGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.3	RowStatus	read-create	Used to create/delete MAC group entries according to the RowStatus convention
alaQoSMACGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17		not-accessible	Table of QoS MACGroup definitions
alaQoSMapGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1		not-accessible	Definition of QoS MapGroup
I32 alaQoSMapGroupKey	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.1	Integer32	not-accessible	Key range start of map group entry.
I32 alaQoSMapGroupKeyEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.2	Integer32	not-accessible	Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
alaQoSMapGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1		not-accessible	Definition of QoS MapGroups
STR alaQoSMapGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.1	DisplayString	not-accessible	Name of map group
INT alaQoSMapGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.2	INTEGER	read-create	What entity created the map group.
ROW alaQoSMapGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.3	RowStatus	read-create	Used to create/delete map groups according to the RowStatus convention
alaQoSMapGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23		not-accessible	Table of QoS MapGroups definitions
ROW alaQoSMapGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.4	RowStatus	read-create	Used to create/delete map group entries according to the RowStatus convention
alaQoSMapGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25		not-accessible	Table of QoS MapGroup definitions
I32 alaQoSMapGroupValue	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.3	Integer32	not-accessible	Value for map group entries. Value to stamp on traffic when keys in the proper range are seen.
alaQoSMIB	1.3.6.1.4.1.6486.801.1.2.1.22.1			QoS and Filtering MIB
alaQoSMIBActionObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.27			Collections of objects providing information for Actions
alaQoSMIBAppliedActionObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.28			Collections of objects providing information for applied Actions
alaQoSMIBAppliedConditionObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.4			Collections of objects providing information for applied Conditions
alaQoSMIBAppliedMACGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.18			Collections of objects providing information for applied MACGroups
alaQoSMIBAppliedMACGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.16			Collections of objects providing information for applied MACGroupss
alaQoSMIBAppliedMapGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.26			Collections of objects providing information for applied MapGroups
alaQoSMIBAppliedMapGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.24			Collections of objects providing information for applied MapGroupss
alaQoSMIBAppliedNetworkGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.14			Collections of objects providing information for applied NetworkGroups
alaQoSMIBAppliedNetworkGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.12			Collections of objects providing information for applied NetworkGroupss
alaQoSMIBAppliedPortGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.22			Collections of objects providing information for applied PortGroups
alaQoSMIBAppliedPortGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.20			Collections of objects providing information for applied PortGroupss
alaQoSMIBAppliedRuleGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.38			Collections of objects providing information for applied RuleGroups
alaQoSMIBAppliedRuleGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.36			Collections of objects providing information for applied RuleGroupss
alaQoSMIBAppliedRuleObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.2			Collections of objects providing information for applied Rules
alaQoSMIBAppliedServiceGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.10			Collections of objects providing information for applied ServiceGroups
alaQoSMIBAppliedServiceGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.8			Collections of objects providing information for applied ServiceGroupss
alaQoSMIBAppliedServiceObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.6			Collections of objects providing information for applied Services
alaQoSMIBClassifyObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.34			Collections of objects providing information for Classifys
alaQoSMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.2.1			Compliance statement for QoS.
alaQoSMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.2			Branch for QoS Compliance Statements.
alaQoSMIBConditionObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.3			Collections of objects providing information for Conditions
alaQoSMIBConfigObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.30			Collections of objects providing information for Configs
alaQoSMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.22.1.2			Branch for QoS Managed Conformance Information.
alaQoSMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1			Branch for QoS Units of Conformance.
alaQoSMIBHwLoopBackProfileObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.43			Collections of objects providing information for Hardware Loopback
alaQoSMIBMACGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.17			Collections of objects providing information for MACGroups
alaQoSMIBMACGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.15			Collections of objects providing information for MACGroupss
alaQoSMIBMapGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.25			Collections of objects providing information for MapGroups
alaQoSMIBMapGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.23			Collections of objects providing information for MapGroupss
alaQoSMIBNetworkGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.13			Collections of objects providing information for NetworkGroups
alaQoSMIBNetworkGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.11			Collections of objects providing information for NetworkGroupss
alaQoSMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.1			Branch for QoS Managed Objects.
alaQoSMIBPortGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.21			Collections of objects providing information for PortGroups
alaQoSMIBPortGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.19			Collections of objects providing information for PortGroupss
alaQoSMIBPortObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.29			Collections of objects providing information for Ports
alaQoSMIBQueueObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.32			Collections of objects providing information for Queues
alaQoSMIBRuleGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.37			Collections of objects providing information for RuleGroups
alaQoSMIBRuleGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.35			Collections of objects providing information for RuleGroupss
alaQoSMIBRuleObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.1			Collections of objects providing information for Rules
alaQoSMIBServiceGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.9			Collections of objects providing information for ServiceGroups
alaQoSMIBServiceGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.7			Collections of objects providing information for ServiceGroupss
alaQoSMIBServiceObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.5			Collections of objects providing information for Services
alaQoSMIBSlotObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.33			Collections of objects providing information for Slots
alaQoSMIBStatsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.31			Collections of objects providing information for Statss
alaQoSNetworkGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1		not-accessible	Definition of QoS NetworkGroup
IP alaQoSNetworkGroupIpAddr	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.1	IpAddress	not-accessible	IP address for network group entry.
IP alaQoSNetworkGroupIpMask	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.2	IpAddress	not-accessible	IP mask for network group entry.
alaQoSNetworkGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1		not-accessible	Definition of QoS NetworkGroups
STR alaQoSNetworkGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.1	DisplayString	not-accessible	Name of network group
INT alaQoSNetworkGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.2	INTEGER	read-create	What entity created the network group.
ROW alaQoSNetworkGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.3	RowStatus	read-create	Used to create/delete network groups according to the RowStatus convention
alaQoSNetworkGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11		not-accessible	Table of QoS NetworkGroups definitions
ROW alaQoSNetworkGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.3	RowStatus	read-create	Used to create/delete network group entries according to the RowStatus convention
alaQoSNetworkGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13		not-accessible	Table of QoS NetworkGroup definitions
I32 alaQoSPortAppliedDefaultQueues	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.18	Integer32	read-only	Current number of default queues for the port Overrides any switch-wide default queue setting
INT alaQoSPortAppliedEnabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.4	INTEGER	read-only	Current QoS enable status for the physical port
I32 alaQoSPortAppliedMaximumDefaultBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.21	Integer32	read-only	Current maximum default bandwidth (Kbits/sec). Maximum rate for default queues this port
INT alaQoSPortAppliedMaximumDefaultBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.22	INTEGER	read-only	Current status field indicating whether to enforce maximum default bandwidth.
I32 alaQoSPortAppliedMaximumDefaultBuffers	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.29	Integer32	read-only	Current maximum buffers for egress queues. Maximum number of buffers for queues on this port
INT alaQoSPortAppliedMaximumDefaultBuffersStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.30	INTEGER	read-only	Current status field indicating whether to enforce maximum buffers.
I32 alaQoSPortAppliedMaximumDefaultDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.25	Integer32	read-only	Current maximum depth of egress queues (Kbytes). Maximum depth of queues on this port
INT alaQoSPortAppliedMaximumDefaultDepthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.26	INTEGER	read-only	Current status field indicating whether to enforce maximum depth.
I32 alaQoSPortAppliedMaximumReservedBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.11	Integer32	read-only	Current maximum reservable bandwidth on the port. Policies can reserve up to this much bandwidth.
INT alaQoSPortAppliedMaximumReservedBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.12	INTEGER	read-only	Current status field indicating whether to enforce maximum reservable bandwidth.
I32 alaQoSPortAppliedMaximumSignalledBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.15	Integer32	read-only	Current maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth.
INT alaQoSPortAppliedMaximumSignalledBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.16	INTEGER	read-only	Current status field indicating whether to enforce maximum signalled bandwidth.
I32 alaQoSPortCOS0MaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.102	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
INT alaQoSPortCOS0MaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.103	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on queue.
I32 alaQoSPortCOS0MinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.118	Integer32	read-create	Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
INT alaQoSPortCOS0MinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.119	INTEGER	read-create	Status field indicating whether to enforce minimum bandwidth on queue.
I32 alaQoSPortCOS1MaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.104	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
INT alaQoSPortCOS1MaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.105	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on queue.
I32 alaQoSPortCOS1MinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.120	Integer32	read-create	Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
INT alaQoSPortCOS1MinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.121	INTEGER	read-create	Status field indicating whether to enforce minimum bandwidth on queue.
I32 alaQoSPortCOS2MaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.106	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
INT alaQoSPortCOS2MaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.107	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on queue.
I32 alaQoSPortCOS2MinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.122	Integer32	read-create	Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
INT alaQoSPortCOS2MinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.123	INTEGER	read-create	Status field indicating whether to enforce minimum bandwidth on queue.
I32 alaQoSPortCOS3MaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.108	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
INT alaQoSPortCOS3MaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.109	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on queue.
I32 alaQoSPortCOS3MinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.124	Integer32	read-create	Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
INT alaQoSPortCOS3MinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.125	INTEGER	read-create	Status field indicating whether to enforce minimum bandwidth on queue.
I32 alaQoSPortCOS4MaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.110	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
INT alaQoSPortCOS4MaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.111	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on queue.
I32 alaQoSPortCOS4MinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.126	Integer32	read-create	Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
INT alaQoSPortCOS4MinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.127	INTEGER	read-create	Status field indicating whether to enforce minimum bandwidth on queue.
I32 alaQoSPortCOS5MaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.112	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
INT alaQoSPortCOS5MaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.113	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on queue.
I32 alaQoSPortCOS5MinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.128	Integer32	read-create	Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
INT alaQoSPortCOS5MinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.129	INTEGER	read-create	Status field indicating whether to enforce minimum bandwidth on queue.
I32 alaQoSPortCOS6MaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.114	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
INT alaQoSPortCOS6MaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.115	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on queue.
I32 alaQoSPortCOS6MinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.130	Integer32	read-create	Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
INT alaQoSPortCOS6MinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.131	INTEGER	read-create	Status field indicating whether to enforce minimum bandwidth on queue.
I32 alaQoSPortCOS7MaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.116	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
INT alaQoSPortCOS7MaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.117	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on queue.
I32 alaQoSPortCOS7MinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.132	Integer32	read-create	Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
INT alaQoSPortCOS7MinimumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.133	INTEGER	read-create	Status field indicating whether to enforce minimum bandwidth on queue.
I32 alaQoSPortCurrentBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.35	Integer32	read-only	Current measured bandwidth of port (Kbits/sec)
I32 alaQoSPortDefault8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.7	Integer32	read-create	802.1p priority value to use for untagged frames arriving on the port and tagged frames when the port is untrusted.
INT alaQoSPortDefaultClassification	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.74	INTEGER	read-create	Ingress traffic classification parameter for Firenze port What field to interpret as priority for WRED
I32 alaQoSPortDefaultDSCP	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.8	Integer32	read-create	DSCP value to stamp in frames arriving on the port when the port is untrusted
I32 alaQoSPortDefaultQidHigh	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.38	Integer32	read-only	Default high queue ID
I32 alaQoSPortDefaultQidLow	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.36	Integer32	read-only	Default low queue ID
I32 alaQoSPortDefaultQidMedium	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.37	Integer32	read-only	Default medium queue ID
I32 alaQoSPortDefaultQidUrgent	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.39	Integer32	read-only	Default urgent queue ID
I32 alaQoSPortDefaultQueues	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.17	Integer32	read-create	Pending number of default queues for the port Overrides any switch-wide default queue setting
INT alaQoSPortDEIMapping	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.138	INTEGER	read-create	This object specifies if, in ingress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in ingress traffic. disabled(2) -- the DEI/CFI bit will not be set in ingress traffic.
INT alaQoSPortDEIMarking	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.136	INTEGER	read-create	This object specifies if, in egress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in egress traffic. disabled(2) -- the DEI/CFI bit will not be set in egress traffic.
INT alaQoSPortEnabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.3	INTEGER	read-create	Pending QoS enable status for the physical port Does not take effect until an 'Apply' command is issued
I32 alaQoSPortEnqueuingThresholdP0Lower	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.81	Integer32	read-create	Priority 0 FIFO lower threshold for high density module
I32 alaQoSPortEnqueuingThresholdP0Upper	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.82	Integer32	read-create	Priority 0 FIFO upper threshold for high density module
I32 alaQoSPortEnqueuingThresholdP1Lower	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.83	Integer32	read-create	Priority 1 FIFO lower threshold for high density module
I32 alaQoSPortEnqueuingThresholdP1Upper	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.84	Integer32	read-create	Priority 1 FIFO upper threshold for high density module
I32 alaQoSPortEnqueuingThresholdP2Lower	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.85	Integer32	read-create	Priority 2 FIFO lower threshold for high density module
I32 alaQoSPortEnqueuingThresholdP2Upper	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.86	Integer32	read-create	Priority 2 FIFO upper threshold for high density module
I32 alaQoSPortEnqueuingThresholdP3Lower	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.87	Integer32	read-create	Priority 3 FIFO lower threshold for high density module
I32 alaQoSPortEnqueuingThresholdP3Upper	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.88	Integer32	read-create	Priority 3 FIFO upper threshold for high density module
INT alaQoSPortEnqueuingThresholdStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.89	INTEGER	read-create	Status field indicating whether enqueuing thresholds need to be enforced on high density module.
alaQoSPortEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1		not-accessible	Definition of QoS Port
C64 alaQoSPortFirPrio0DeqBytes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.47	Counter64	read-only	Firenze priority 0 dequeue byte count
C64 alaQoSPortFirPrio0DeqPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.49	Counter64	read-only	Firenze priority 0 dequeue packet count
C64 alaQoSPortFirPrio0EnqBytes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.46	Counter64	read-only	Firenze priority 0 enqueue byte count
C64 alaQoSPortFirPrio0EnqPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.48	Counter64	read-only	Firenze priority 0 enqueue packet count
C64 alaQoSPortFirPrio0OverflowDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.52	Counter64	read-only	Firenze priority 0 overflow discard packet count
C64 alaQoSPortFirPrio0QidDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.50	Counter64	read-only	Firenze priority 0 QID discard packet count
C64 alaQoSPortFirPrio0WredDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.51	Counter64	read-only	Firenze priority 0 WRED discard packet count
C64 alaQoSPortFirPrio1DeqBytes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.54	Counter64	read-only	Firenze priority 1 dequeue byte count
C64 alaQoSPortFirPrio1DeqPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.56	Counter64	read-only	Firenze priority 1 dequeue packet count
C64 alaQoSPortFirPrio1EnqBytes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.53	Counter64	read-only	Firenze priority 1 enqueue byte count
C64 alaQoSPortFirPrio1EnqPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.55	Counter64	read-only	Firenze priority 1 enqueue packet count
C64 alaQoSPortFirPrio1OverflowDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.59	Counter64	read-only	Firenze priority 1 overflow discard packet count
C64 alaQoSPortFirPrio1QidDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.57	Counter64	read-only	Firenze priority 1 QID discard packet count
C64 alaQoSPortFirPrio1WredDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.58	Counter64	read-only	Firenze priority 1 WRED discard packet count
C64 alaQoSPortFirPrio2DeqBytes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.61	Counter64	read-only	Firenze priority 2 dequeue byte count
C64 alaQoSPortFirPrio2DeqPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.63	Counter64	read-only	Firenze priority 2 dequeue packet count
C64 alaQoSPortFirPrio2EnqBytes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.60	Counter64	read-only	Firenze priority 2 enqueue byte count
C64 alaQoSPortFirPrio2EnqPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.62	Counter64	read-only	Firenze priority 2 enqueue packet count
C64 alaQoSPortFirPrio2OverflowDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.66	Counter64	read-only	Firenze priority 2 overflow discard packet count
C64 alaQoSPortFirPrio2QidDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.64	Counter64	read-only	Firenze priority 2 QID discard packet count
C64 alaQoSPortFirPrio2WredDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.65	Counter64	read-only	Firenze priority 2 WRED discard packet count
C64 alaQoSPortFirPrio3DeqBytes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.68	Counter64	read-only	Firenze priority 3 dequeue byte count
C64 alaQoSPortFirPrio3DeqPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.70	Counter64	read-only	Firenze priority 3 dequeue packet count
C64 alaQoSPortFirPrio3EnqBytes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.67	Counter64	read-only	Firenze priority 3 enqueue byte count
C64 alaQoSPortFirPrio3EnqPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.69	Counter64	read-only	Firenze priority 3 enqueue packet count
C64 alaQoSPortFirPrio3OverflowDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.73	Counter64	read-only	Firenze priority 3 overflow discard packet count
C64 alaQoSPortFirPrio3QidDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.71	Counter64	read-only	Firenze priority 3 QID discard packet count
C64 alaQoSPortFirPrio3WredDiscardPkts	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.72	Counter64	read-only	Firenze priority 3 WRED discard packet count
I32 alaQoSPortFloodQid	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.40	Integer32	read-only	ID of the flood queue
I32 alaQoSPortFreeFFPMasks	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.94	Integer32	read-only	Number of Free FPP mask entries
I32 alaQoSPortFreeFFPRules	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.92	Integer32	read-only	Number of Free FPP rule entries
alaQoSPortGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1		not-accessible	Definition of QoS PortGroup
I32 alaQoSPortGroupPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.2	Integer32	not-accessible	Physical port range start for port group entry
I32 alaQoSPortGroupPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.4	Integer32	not-accessible	Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
alaQoSPortGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1		not-accessible	Definition of QoS PortGroups
I32 alaQoSPortGroupSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.1	Integer32	not-accessible	Physical slot for port group entry
STR alaQoSPortGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.1	DisplayString	not-accessible	Name of port group
INT alaQoSPortGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.2	INTEGER	read-create	What entity created the port group.
ROW alaQoSPortGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.3	RowStatus	read-create	Used to create/delete port groups according to the RowStatus convention
alaQoSPortGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19		not-accessible	Table of QoS PortGroups definitions
ROW alaQoSPortGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.3	RowStatus	read-create	Used to create/delete port group entries according to the RowStatus convention
alaQoSPortGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21		not-accessible	Table of QoS PortGroup definitions
INT alaQoSPortHighDensity	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.90	INTEGER	read-only	Indicates whether this is a high-density port or not.
I32 alaQoSPortHighPriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.77	Integer32	read-create	Weight to use for high priority egress queue on fixed queue blades.
INT alaQoSPortInterfaceType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.5	INTEGER	read-only	The type of interface QoS matches for this physical port
I32 alaQoSPortLowPriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.75	Integer32	read-create	Weight to use for low priority egress queue on fixed queue blades.
I32 alaQoSPortMaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.79	Integer32	read-create	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this port
INT alaQoSPortMaximumBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.80	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on port.
I32 alaQoSPortMaximumDefaultBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.19	Integer32	read-create	Pending maximum default bandwidth (Kbits/sec). Maximum rate for default queues on this port Does not take effect until an 'Apply' command is issued
INT alaQoSPortMaximumDefaultBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.20	INTEGER	read-create	Pending status field indicating whether to enforce maximum default bandwidth on next 'Apply'
I32 alaQoSPortMaximumDefaultBuffers	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.27	Integer32	read-create	Pending maximum buffers for egress queues. Maximum number of buffers for queues on this port Does not take effect until an 'Apply' command is issued
INT alaQoSPortMaximumDefaultBuffersStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.28	INTEGER	read-create	Pending status field indicating whether to enforce maximum buffers on next 'Apply'
I32 alaQoSPortMaximumDefaultDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.23	Integer32	read-create	Pending maximum depth of egress queues (Kbytes). Maximum depth of queues on this port Does not take effect until an 'Apply' command is issued
INT alaQoSPortMaximumDefaultDepthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.24	INTEGER	read-create	Pending status field indicating whether to enforce maximum depth on next 'Apply'
I32 alaQoSPortMaximumIngBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.134	Integer32	read-create	Maximum igress bandwidth (Kbits/sec). Maximum rate to recieve traffic in on this port
INT alaQoSPortMaximumIngBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.135	INTEGER	read-create	Status field indicating whether to enforce maximum bandwidth on port.
I32 alaQoSPortMaximumReservedBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.9	Integer32	read-create	Pending maximum reservable bandwidth on the port. Policies can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued
INT alaQoSPortMaximumReservedBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.10	INTEGER	read-create	Pending status field indicating whether to enforce maximum reservable bandwidth on next 'Apply'
I32 alaQoSPortMaximumSignalledBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.13	Integer32	read-create	Pending maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued
INT alaQoSPortMaximumSignalledBandwidthStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.14	INTEGER	read-create	Pending status field indicating whether to enforce maximum signalled bandwidth on next 'Apply'
I32 alaQoSPortMediumPriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.76	Integer32	read-create	Weight to use for medium priority egress queue on fixed queue blades.
INT alaQoSPortMonitor	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.137	INTEGER	read-create	This object is used to monitor a slot/port on which user is interested to get the cos egress statistics. enabled(1) -- monitor the slot/port to gather per port cos egress statistics. disabled(2) -- reset the previously monitored slot/port.
I32 alaQoSPortNonSpoofedCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.97	Integer32	read-only	Non-spoofed packet count
alaQoSPortPdiEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1		not-accessible	Definition of QoS PortPdi
I32 alaQoSPortPdiId	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.1	Integer32	not-accessible	Used on high density module classification in the MAC. This is the index used in the PDI.
I32 alaQoSPortPdiPriorityP0	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.3	Integer32	read-only	Used on high density module classification in the MAC. This is the internal priority mapping for a P0 packet.
I32 alaQoSPortPdiPriorityP1	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.4	Integer32	read-only	Used on high density module classification in the MAC. This is the internal priority mapping for a P1 packet.
I32 alaQoSPortPdiPriorityP2	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.5	Integer32	read-only	Used on high density module classification in the MAC. This is the internal priority mapping for a P2 packet.
I32 alaQoSPortPdiPriorityP3	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.6	Integer32	read-only	Used on high density module classification in the MAC. This is the internal priority mapping for a P3 packet.
I32 alaQoSPortPdiPriorityP4	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.7	Integer32	read-only	Used on high density module classification in the MAC. This is the internal priority mapping for a P4 packet.
I32 alaQoSPortPdiPriorityP5	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.8	Integer32	read-only	Used on high density module classification in the MAC. This is the internal priority mapping for a P5 packet.
I32 alaQoSPortPdiPriorityP6	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.9	Integer32	read-only	Used on high density module classification in the MAC. This is the internal priority mapping for a P6 packet.
I32 alaQoSPortPdiPriorityP7	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.10	Integer32	read-only	Used on high density module classification in the MAC. This is the internal priority mapping for a P7 packet.
I32 alaQoSPortPdiPriorityType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39.1.2	Integer32	read-only	Used on high density module classification in the MAC. This is the classification type on the port.
alaQoSPortPdiTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.39		not-accessible	Table of QoS PortPdi definitions
I32 alaQoSPortPhysicalBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.32	Integer32	read-only	Physical bandwidth of port (Kbit/sec)
I32 alaQoSPortPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.2	Integer32	not-accessible	Physical port number
INT alaQoSPortProtocolClassification	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.2	INTEGER	read-create	Used on high density module classification in the MAC. This determines what type of classification is used to find priority.
alaQoSPortProtocolEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1		not-accessible	Definition of QoS PortProtocol
INT alaQoSPortProtocolId	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.1	INTEGER	not-accessible	Used on high density module classification in the MAC. This is the protocol id that needs to be changed.
I32 alaQoSPortProtocolPriorityP0	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.3	Integer32	read-create	Used on high density module classification in the MAC. This is the new priority for P0 to be mapped to.
I32 alaQoSPortProtocolPriorityP1	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.4	Integer32	read-create	Used on high density module classification in the MAC. This is the new priority for P1 to be mapped to.
I32 alaQoSPortProtocolPriorityP2	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.5	Integer32	read-create	Used on high density module classification in the MAC. This is the new priority for P2 to be mapped to.
I32 alaQoSPortProtocolPriorityP3	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.6	Integer32	read-create	Used on high density module classification in the MAC. This is the new priority for P3 to be mapped to.
I32 alaQoSPortProtocolPriorityP4	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.7	Integer32	read-create	Used on high density module classification in the MAC. This is the new priority for P4 to be mapped to.
I32 alaQoSPortProtocolPriorityP5	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.8	Integer32	read-create	Used on high density module classification in the MAC. This is the new priority for P5 to be mapped to.
I32 alaQoSPortProtocolPriorityP6	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.9	Integer32	read-create	Used on high density module classification in the MAC. This is the new priority for P6 to be mapped to.
I32 alaQoSPortProtocolPriorityP7	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.10	Integer32	read-create	Used on high density module classification in the MAC. This is the new priority for P7 to be mapped to.
ROW alaQoSPortProtocolRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.11	RowStatus	read-create	Used to create/delete rows according to RowStatus convention
alaQoSPortProtocolTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36		not-accessible	Table of QoS PortProtocol definitions
I32 alaQoSPortQ4PriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.98	Integer32	read-create	Weight to use for cos queue 4.
I32 alaQoSPortQ5PriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.99	Integer32	read-create	Weight to use for cos queue 5.
I32 alaQoSPortQ6PriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.100	Integer32	read-create	Weight to use for cos queue 6.
I32 alaQoSPortQ7PriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.101	Integer32	read-create	Weight to use for cos queue 7.
I32 alaQoSPortQueues	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.41	Integer32	read-only	Number of queues currently on the port
I32 alaQoSPortQueuesCreated	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.42	Integer32	read-only	Number of queue requests on the port
I32 alaQoSPortQueuesFailed	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.43	Integer32	read-only	Number of queue requests that failed on the port
I32 alaQoSPortQueuesPreempted	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.44	Integer32	read-only	Number of queues preempted on the port
I32 alaQoSPortReservedBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.33	Integer32	read-only	Bandwidth reserved by policies on port (Kbit/sec)
INT alaQoSPortReset	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.31	INTEGER	read-create	Reset all QoS parameters to default values
ROW alaQoSPortRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.45	RowStatus	read-create	Used to create/delete ports according to the RowStatus convention
INT alaQoSPortServicingMode	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.91	INTEGER	read-create	Servicing mode for the port
I32 alaQoSPortSignalledBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.34	Integer32	read-only	Bandwidth reserved by signalling on port (Kbit/sec)
I32 alaQoSPortSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.1	Integer32	not-accessible	Physical slot port resides on
I32 alaQoSPortSpoofedCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.96	Integer32	read-only	Spoofed packet count
alaQoSPortTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29		not-accessible	Table of QoS Port definitions
INT alaQoSPortTrusted	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.6	INTEGER	read-create	Status of trusting 802.1p/TOS/DSCP values. When trusted, 802.1p/DSCP values in the packet are passed through the switch. When untrusted, 802.1p/DSCP values are set to the port defaults.
I32 alaQoSPortUrgentPriorityWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.78	Integer32	read-create	Weight to use for urgent priority egress queue on fixed queue blades.
I32 alaQoSPortUsedFFPMasks	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.95	Integer32	read-only	Number of Free FPP mask enries
I32 alaQoSPortUsedFFPRules	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.93	Integer32	read-only	Number of Used FPP rule entries
I32 alaQoSQueue8021p	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.13	Integer32	read-only	802.1p value queue places on traffic
STR alaQoSQueueAction	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.19	DisplayString	read-only	Name of the action this queue was created from
I32 alaQoSQueueAverageBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.9	Integer32	read-only	Average measured bandwidth (Kbits/sec) for the queue
I32 alaQoSQueueAverageLength	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.17	Integer32	read-only	Average measured length of the queue in buffers
I32 alaQoSQueueCurrentLength	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.18	Integer32	read-only	Current measured length of the queue in buffers
alaQoSQueueEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1		not-accessible	Definition of QoS Queue
I32 alaQoSQueueId	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.1	Integer32	not-accessible	Internal queue identifier
I32 alaQoSQueueMaximumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.8	Integer32	read-only	Maximum bandwidth (Kbits/sec) given to the queue
I32 alaQoSQueueMaximumBuffers	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.12	Integer32	read-only	Maximum number of buffers for the queue
I32 alaQoSQueueMaximumDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.11	Integer32	read-only	Maximum depth (Kbytes) of the queue
I32 alaQoSQueueMaxLength	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.16	Integer32	read-only	Maximum measured length the queue has reached in buffers
I32 alaQoSQueueMinimumBandwidth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.7	Integer32	read-only	Minimum bandwidth (Kbits/sec) given to the queue
I32 alaQoSQueueMinimumDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.10	Integer32	read-only	Minimum depth (Kbytes) of the queue
I32 alaQoSQueuePacketsDropped	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.15	Integer32	read-only	Number of packets dropped trying to queue into this queue
I32 alaQoSQueuePacketsSent	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.14	Integer32	read-only	Number of packets sent through the queue
I32 alaQoSQueuePort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.3	Integer32	read-only	Physical port queue is destined to
I32 alaQoSQueuePortId	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.4	Integer32	read-only	Internal global port id of destination port
I32 alaQoSQueuePriority	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.6	Integer32	read-only	Queueing priority for the queue
I32 alaQoSQueueSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.2	Integer32	read-only	Physical slot queue is destined to
alaQoSQueueTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32		not-accessible	Table of QoS Queue definitions
INT alaQoSQueueType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.5	INTEGER	read-only	Type of queueing done on this queue
STR alaQoSRuleAction	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.6	DisplayString	read-create	Name of the action to use
INT alaQoSRuleActive	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.12	INTEGER	read-only	Is this rule enforcable by the switch.
C64 alaQoSRuleByteCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.19	Counter64	read-only	Counter for bytes matching this rule
STR alaQoSRuleCondition	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.5	DisplayString	read-create	Name of the condition to use
INT alaQoSRuleCountType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.17	INTEGER	read-create	Which rule statistics counters to update if not all are available
INT alaQoSRuleDefaultList	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.24	INTEGER	read-create	This rule belongs to the default policy list.
INT alaQoSRuleEnabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.2	INTEGER	read-create	Is this rule enabled or not
INT alaQoSRuleEnforced	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.11	INTEGER	read-only	Is this rule currenly being enforced on the switch.
alaQoSRuleEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1		not-accessible	Definition of QoS Rule
C64 alaQoSRuleExcessByteCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.21	Counter64	read-only	Counter for bytes out of bandwidth parameters
C64 alaQoSRuleExcessPacketCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.20	Counter64	read-only	Counter for packets out of bandwidth parameters
C64 alaQoSRuleGreenCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.25	Counter64	read-only	Counter for the number of packets being green compliant.
C64 alaQoSRuleGroupByteCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.46.1.5	Counter64	read-only	Counter for bytes matching this rule
INT alaQoSRuleGroupCountType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.46.1.3	INTEGER	read-create	Which rule statistics counters to update if not all are available
alaQoSRuleGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.46.1		not-accessible	Definition of QoS RuleGroup
C32 alaQoSRuleGroupMatches	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.46.1.2	Counter32	read-only	Number of times this rule has been matched.
C64 alaQoSRuleGroupPacketCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.46.1.4	Counter64	read-only	Counter for packets patching this rule
STR alaQoSRuleGroupRuleName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.46.1.1	DisplayString	not-accessible	Name of rule in rule group entry
INT alaQoSRuleGroupsEnabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.44.1.4	INTEGER	read-create	Is this rule grop enabled or not
alaQoSRuleGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.44.1		not-accessible	Definition of QoS RuleGroups
STR alaQoSRuleGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.44.1.1	DisplayString	not-accessible	Name of rule group
INT alaQoSRuleGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.44.1.2	INTEGER	read-create	What entity created the rule group.
ROW alaQoSRuleGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.44.1.5	RowStatus	read-create	Used to create/delete rule groups according to the RowStatus convention
alaQoSRuleGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.44		not-accessible	Table of QoS RuleGroups definitions
ROW alaQoSRuleGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.46.1.6	RowStatus	read-create	Used to create/delete rule group entries according to the RowStatus convention
INT alaQoSRuleGroupsType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.44.1.3	INTEGER	read-create	Type of rule group.
alaQoSRuleGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.46		not-accessible	Table of QoS RuleGroup definitions
INT alaQoSRuleLog	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.9	INTEGER	read-create	Indicator to tell whether to log matches to this rule in the QoS log.
I32 alaQoSRuleLogInterval	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.16	Integer32	read-create	How often to look for packets matching this rule when logging. When 0 log as many as possible.
C32 alaQoSRuleMatches	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.10	Counter32	read-only	Number of times this rule has been matched.
STR alaQoSRuleName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.1	DisplayString	not-accessible	Name of rule
C64 alaQoSRuleNonGreenCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.28	Counter64	read-only	Counter for the number of packets being non-green compliant.
C64 alaQoSRuleNonRedCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.29	Counter64	read-only	Counter for the number of packets being non-red compliant.
C64 alaQoSRulePacketCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.18	Counter64	read-only	Counter for packets patching this rule
I32 alaQoSRulePrecedence	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.4	Integer32	read-create	Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received.
C64 alaQoSRuleRedCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.27	Counter64	read-only	Counter for the number of packets being red compliant.
INT alaQoSRuleReflexive	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.7	INTEGER	read-create	Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
ROW alaQoSRuleRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.13	RowStatus	read-create	Used to create/delete rules according to the RowStatus convention
INT alaQoSRuleSave	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.8	INTEGER	read-create	Indicator to tell whether to write out the rule during snapshot commands.
INT alaQoSRuleSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.3	INTEGER	read-create	What entity created the rule.
alaQoSRuleTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1		not-accessible	Table of QoS Rule definitions
INT alaQoSRuleTrapEvents	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.23	INTEGER	read-create	Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
I32 alaQoSRuleType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.22	Integer32	read-only	The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
STR alaQoSRuleValidityPeriod	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.14	DisplayString	read-create	Name of the validity period to use
INT alaQoSRuleValidityPeriodStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.15	INTEGER	read-create	Status field indicating whether there is a validity period associated with this rule
C64 alaQoSRuleYellowCount	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.26	Counter64	read-only	Counter for the number of packets being yellow compliant.
I32 alaQoSServiceDestinationIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.6	Integer32	read-create	Destination IP port range start to use for traffic classification.
I32 alaQoSServiceDestinationIpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.10	Integer32	read-create	Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
INT alaQoSServiceDestinationIpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.7	INTEGER	read-create	Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSServiceDestinationTcpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.14	Integer32	read-create	Destination TCP port range start to use for traffic classification.
I32 alaQoSServiceDestinationTcpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.16	Integer32	read-create	Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
INT alaQoSServiceDestinationTcpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.15	INTEGER	read-create	Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSServiceDestinationUdpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.20	Integer32	read-create	Destination UDP port range start to use for traffic classification.
I32 alaQoSServiceDestinationUdpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.22	Integer32	read-create	Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port.
INT alaQoSServiceDestinationUdpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.21	INTEGER	read-create	Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
alaQoSServiceEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1		not-accessible	Definition of QoS Service
alaQoSServiceGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1		not-accessible	Definition of QoS ServiceGroup
alaQoSServiceGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1		not-accessible	Definition of QoS ServiceGroups
STR alaQoSServiceGroupServiceName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.1	DisplayString	not-accessible	Name of service in service group entry
STR alaQoSServiceGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.1	DisplayString	not-accessible	Name of service group
INT alaQoSServiceGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.2	INTEGER	read-create	What entity created the service group.
ROW alaQoSServiceGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.3	RowStatus	read-create	Used to create/delete service groups according to the RowStatus convention
alaQoSServiceGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7		not-accessible	Table of QoS ServiceGroups definitions
ROW alaQoSServiceGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.2	RowStatus	read-create	Used to create/delete service group entries according to the RowStatus convention
alaQoSServiceGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9		not-accessible	Table of QoS ServiceGroup definitions
STR alaQoSServiceName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.1	DisplayString	not-accessible	Name of the service
I32 alaQoSServiceProtocol	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.3	Integer32	read-create	protocol field for Service
ROW alaQoSServiceRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.8	RowStatus	read-create	Used to create/delete services according to the RowStatus convention
INT alaQoSServiceSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.2	INTEGER	read-create	What entity created the service.
I32 alaQoSServiceSourceIpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.4	Integer32	read-create	Source IP port range start to use for traffic classification.
I32 alaQoSServiceSourceIpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.9	Integer32	read-create	Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
INT alaQoSServiceSourceIpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.5	INTEGER	read-create	Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSServiceSourceTcpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.11	Integer32	read-create	Source TCP port range start to use for traffic classification.
I32 alaQoSServiceSourceTcpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.13	Integer32	read-create	Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
INT alaQoSServiceSourceTcpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.12	INTEGER	read-create	Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
I32 alaQoSServiceSourceUdpPort	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.17	Integer32	read-create	Source UDP port range start to use for traffic classification.
I32 alaQoSServiceSourceUdpPortEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.19	Integer32	read-create	Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
INT alaQoSServiceSourceUdpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.18	INTEGER	read-create	Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
alaQoSServiceTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5		not-accessible	Table of QoS Service definitions
I32 alaQoSSlotBuffersDenied	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.15	Integer32	read-only	Buffers denied on this slot
I32 alaQoSSlotBuffersDeniedAverage	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.16	Integer32	read-only	Average number of denied buffers over time
I32 alaQoSSlotBuffersDropped	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.17	Integer32	read-only	Buffers dropped on this slot
I32 alaQoSSlotBuffersDroppedAverage	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.18	Integer32	read-only	Average number of dropped buffers over time
INT alaQoSSlotCbqThresholdMode	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.29	INTEGER	read-create	Servicing mode for the CBQ thresholds for high density modules
I32 alaQoSSlotCbqThresholdP1	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.30	Integer32	read-create	Priority 1 CBQ threshold for high density module
I32 alaQoSSlotCbqThresholdP2	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.31	Integer32	read-create	Priority 2 CBQ threshold for high density module
I32 alaQoSSlotCbqThresholdP3	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.32	Integer32	read-create	Priority 3 CBQ threshold for high density module
alaQoSSlotDscpEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1		not-accessible	Definition of QoS SlotDscp
I32 alaQoSSlotDscpIndex	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.1	Integer32	not-accessible	Used on high density module classification in the MAC This is the index into the DSCP table to access.
I32 alaQoSSlotDscpPriority	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.2	Integer32	read-create	Used on high density module classification in the MAC. This is the priority of the index of the DSCP table.
alaQoSSlotDscpTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37		not-accessible	Table of QoS SlotDscp definitions
alaQoSSlotEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1		not-accessible	Definition of QoS Slot
I32 alaQoSSlotFreeBuffers1	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.5	Integer32	read-only	Current free buffers in list 1
I32 alaQoSSlotFreeBuffers2	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.6	Integer32	read-only	Current free buffers in list 2
INT alaQoSSlotHighDensity	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.33	INTEGER	read-only	Indicates whether this is a high-density slice or not.
I32 alaQoSSlotMaxBuffers	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.4	Integer32	read-only	Maximum total buffers on this slot/slice
INT alaQoSSlotPcam8023Enabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.5	INTEGER	read-only	Used on high density module classification in the MAC. This will enable 802.3 checking on the CAM entry.
I32 alaQoSSlotPcamDsap	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.3	Integer32	read-only	Used on high density module classification in the MAC. This is the destination SAP in an 802.3 packet.
INT alaQoSSlotPcamEnable8023	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.8	INTEGER	read-only	Used on high density module to indiciate if 802.3 is enabled in the pcam entry.
INT alaQoSSlotPcamEnableDsap	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.9	INTEGER	read-only	Used on high density module to indiciate if DSAP is enabled in the pcam entry.
INT alaQoSSlotPcamEnableEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.7	INTEGER	read-only	Used on high density module to enable the pcam entry.
INT alaQoSSlotPcamEnableEthertype	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.11	INTEGER	read-only	Used on high density module to indiciate if Ethertype is enabled in the pcam entry.
INT alaQoSSlotPcamEnableSsap	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.10	INTEGER	read-only	Used on high density module to indiciate if SSAP is enabled in the pcam entry.
alaQoSSlotPcamEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1		not-accessible	Definition of QoS SlotPcam
I32 alaQoSSlotPcamEthertype	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.2	Integer32	read-only	Used on high density module classification in the MAC. This is the Ethernet type in the CAM.
I32 alaQoSSlotPcamId	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.1	Integer32	not-accessible	Used on high density module classification in the MAC. This is the index used in the PCAM.
I32 alaQoSSlotPcamProtocolNumber	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.6	Integer32	read-only	Used on high density module classification in the MAC. This identifies the protocol number of the CAM entry.
I32 alaQoSSlotPcamSsap	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38.1.4	Integer32	read-only	Used on high density module classification in the MAC. This is the source SAP in an 802.3 packet.
alaQoSSlotPcamTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.38		not-accessible	Table of QoS SlotPcam definitions
INT alaQoSSlotProtocol8023Enabled	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.5	INTEGER	read-create	Used on high density module classification in the MAC. This will enable 802.3 checking on the CAM entry.
I32 alaQoSSlotProtocolDsap	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.3	Integer32	read-create	Used on high density module classification in the MAC. This is the destination SAP in an 802.3 packet.
alaQoSSlotProtocolEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1		not-accessible	Definition of QoS SlotProtocol
I32 alaQoSSlotProtocolEthertype	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.2	Integer32	read-create	Used on high density module classification in the MAC. This is the Ethernet type used between the CAM for classification.
INT alaQoSSlotProtocolId	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.1	INTEGER	not-accessible	Used on high density module classification in the MAC. This is the protocol ID used between the CAM and priority descriptors.
ROW alaQoSSlotProtocolRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.7	RowStatus	read-create	Used to create/delete slot protoocols according to the RowStatus convention
I32 alaQoSSlotProtocolSsap	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.4	Integer32	read-create	Used on high density module classification in the MAC. This is the source SAP in an 802.3 packet.
alaQoSSlotProtocolTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35		not-accessible	Table of QoS SlotProtocol definitions
INT alaQoSSlotProtocolType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.6	INTEGER	read-create	Used on high density module classification in the MAC. This positions the CAM entry in the list. Priority will put the entries in the front of the CAM, giving it priority. fallback will put the entry at the end.
I32 alaQoSSlotSlice	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.2	Integer32	not-accessible	Physical device number on slot
I32 alaQoSSlotSlot	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.1	Integer32	not-accessible	Physical slot number
alaQoSSlotTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33		not-accessible	Table of QoS Slot definitions
I32 alaQoSSlotThreshold1High	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.9	Integer32	read-only	Buffer are not given to high priority traffic from list 1 when free buffers in list 1 is less than this threshold.
I32 alaQoSSlotThreshold1Low	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.7	Integer32	read-only	Buffer are not given to low priority traffic from list 1 when free buffers in list 1 is less than this threshold.
I32 alaQoSSlotThreshold1Medium	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.8	Integer32	read-only	Buffer are not given to medium priority traffic from list 1 when free buffers in list 1 is less than this threshold.
I32 alaQoSSlotThreshold1Urgent	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.10	Integer32	read-only	Buffer are not given to urgent priority traffic from list 1 when free buffers in list 1 is less than this threshold.
I32 alaQoSSlotThreshold2High	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.13	Integer32	read-only	Buffer are not given to high priority traffic from list 2 when free buffers in list 2 is less than this threshold.
I32 alaQoSSlotThreshold2Low	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.11	Integer32	read-only	Buffer are not given to low priority traffic from list 2 when free buffers in list 2 is less than this threshold.
I32 alaQoSSlotThreshold2Medium	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.12	Integer32	read-only	Buffer are not given to medium priority traffic from list 2 when free buffers in list 2 is less than this threshold.
I32 alaQoSSlotThreshold2Urgent	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.14	Integer32	read-only	Buffer are not given to urgent priority traffic from list 2 when free buffers in list 2 is less than this threshold.
INT alaQoSSlotType	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.3	INTEGER	read-only	Type of hardware in this slot/slice
I32 alaQoSSlotWredAverageCounterWeight	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.27	Integer32	read-create	The weight used in the WRED algorithm. It is used as a negative power of 2
I32 alaQoSSlotWredThresholdP0Lower	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.19	Integer32	read-create	Priority 0 WRED lower threshold for high density module
I32 alaQoSSlotWredThresholdP0Upper	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.20	Integer32	read-create	Priority 0 WRED upper threshold for high density module
I32 alaQoSSlotWredThresholdP1Lower	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.21	Integer32	read-create	Priority 1 WRED lower threshold for high density module
I32 alaQoSSlotWredThresholdP1Upper	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.22	Integer32	read-create	Priority 1 WRED upper threshold for high density module
I32 alaQoSSlotWredThresholdP2Lower	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.23	Integer32	read-create	Priority 2 WRED lower threshold for high density module
I32 alaQoSSlotWredThresholdP2Upper	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.24	Integer32	read-create	Priority 2 WRED upper threshold for high density module
I32 alaQoSSlotWredThresholdP3Lower	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.25	Integer32	read-create	Priority 3 WRED lower threshold for high density module
I32 alaQoSSlotWredThresholdP3Upper	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.26	Integer32	read-create	Priority 3 WRED upper threshold for high density module
INT alaQoSSlotWredThresholdStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.28	INTEGER	read-create	Status field indicating whether WRED maximum thresholds are specified(enable) or not(disable).
alaQoSStats	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31
C32 alaQoSStatsBadFragments	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.14	Counter32	read-only	Number of illegal (offset = 1) fragments
C32 alaQoSStatsClassifierMaxDepth	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.20	Counter32	read-only	Length of longest path in classifier tree
C32 alaQoSStatsClassifierMaxNodes	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.19	Counter32	read-only	Highest number of nodes in classifier tree
C32 alaQoSStatsDropServicesEvents	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.28	Counter32	read-only	Total number of packets matching the DropServices group
C32 alaQoSStatsFailedNIMessages	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.25	Counter32	read-only	Number of failed message attemptes to NIs
C32 alaQoSStatsFlowHits	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.22	Counter32	read-only	Number of flow table lookup hits
C32 alaQoSStatsFlowLookups	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.21	Counter32	read-only	Number of flow table lookups
C32 alaQoSStatsFragments	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.13	Counter32	read-only	Number of fragments processed by QoS
C32 alaQoSStatsL2Drops	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.3	Counter32	read-only	Number of L2 classifications matching a drop policy
C32 alaQoSStatsL2EventsEx	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.1	Counter32	read-only	Number of L2 classification events
C32 alaQoSStatsL2Matches	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.2	Counter32	read-only	Number of L2 classifications matching a policy
C32 alaQoSStatsL3EgressDrops	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.9	Counter32	read-only	Number of L3 egress classifications matching a drop policy
C32 alaQoSStatsL3EgressEvents	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.7	Counter32	read-only	Number of L3/L4 egress classification events
C32 alaQoSStatsL3EgressMatches	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.8	Counter32	read-only	Number of L3 egress classifications matching a policy
C32 alaQoSStatsL3IngressDrops	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.6	Counter32	read-only	Number of L3 ingress classifications matching a drop policy
C32 alaQoSStatsL3IngressEvents	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.4	Counter32	read-only	Number of L3/L4 ingress classification events
C32 alaQoSStatsL3IngressMatches	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.5	Counter32	read-only	Number of L3 ingress classifications matching a policy
C32 alaQoSStatsLoadBalanceFlows	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.18	Counter32	read-only	Number of server load balanced flow entries
C32 alaQoSStatsMulticastDrops	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.12	Counter32	read-only	Number of IGMP classifications matching a drop policy
C32 alaQoSStatsMulticastEvents	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.10	Counter32	read-only	Number of IGMP classification events
C32 alaQoSStatsMulticastMatches	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.11	Counter32	read-only	Number of IGMP classifications matching a policy
C32 alaQoSStatsNonSpoofedEvents	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.27	Counter32	read-only	Total number of non-spoofed events
C32 alaQoSStatsReceivedNIMessages	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.24	Counter32	read-only	Number of messages received from NIs
C32 alaQoSStatsReflexiveCorrections	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.17	Counter32	read-only	Number of reflexive flow corrections
C32 alaQoSStatsReflexiveFlows	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.16	Counter32	read-only	Number of reflexive flow entries
C32 alaQoSStatsSentNIMessages	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.23	Counter32	read-only	Number of messages sent to NIs
C32 alaQoSStatsSpoofedEvents	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.26	Counter32	read-only	Total Number of spoofed events
C32 alaQoSStatsUnknownFragments	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.15	Counter32	read-only	Number of out of order fragment pieces
I32 alaQoSValidityPeriodDays	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.3	Integer32	read-create	Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
INT alaQoSValidityPeriodDaysStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.4	INTEGER	read-create	Status field indicating whether the validity period has specific active days of the month.
STR alaQoSValidityPeriodEndHour	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.9	DisplayString	read-create	Time of day this period becomes inactive. Format is 'hh:mm'
STR alaQoSValidityPeriodEndInterval	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.12	DisplayString	read-create	Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
alaQoSValidityPeriodEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1		not-accessible	Definition of QoS ValidityPeriod
STR alaQoSValidityPeriodHour	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.7	DisplayString	read-create	Time of day this period becomes active. Format is 'hh:mm'
INT alaQoSValidityPeriodHourStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.8	INTEGER	read-create	Status field indicating whether the validity period has specific active hours of the day.
STR alaQoSValidityPeriodInterval	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.10	DisplayString	read-create	Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
INT alaQoSValidityPeriodIntervalStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.11	INTEGER	read-create	Status field indicating whether the validity period has a specific active date-time interval.
I32 alaQoSValidityPeriodMonths	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.5	Integer32	read-create	Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
INT alaQoSValidityPeriodMonthsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.6	INTEGER	read-create	Status field indicating whether the validity period has specific active days of the week.
STR alaQoSValidityPeriodName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.1	DisplayString	not-accessible	Name of validity period
ROW alaQoSValidityPeriodRowStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.13	RowStatus	read-create	Used to create/delete validity periods according to the RowStatus convention
INT alaQoSValidityPeriodSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.2	INTEGER	read-create	What entity created the validity period.
alaQoSValidityPeriodTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40		not-accessible	Table of QoS ValidityPeriod definitions
alaQoSVlanGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.50.1		not-accessible	Definition of QoS Vlan Group
alaQoSVlanGroupObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.41			Collections of objects providing QoS Vlan Groups definitions.
alaQoSVlanGroupsEntry	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.48.1		not-accessible	Definition of QoS Vlan Groups
STR alaQoSVlanGroupsName	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.48.1.1	DisplayString	not-accessible	Name of Vlan group
alaQoSVlanGroupsObjects	1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.39			Collections of objects providing QoS Vlan Groups definitions.
INT alaQoSVlanGroupsSource	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.48.1.2	INTEGER	read-create	What entity created the Vlan group.
ROW alaQoSVlanGroupsStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.48.1.3	RowStatus	read-create	Used to create/delete Vlan groups according to the RowStatus convention
alaQoSVlanGroupsTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.48		not-accessible	Table of QoS Vlan Groups definitions
ROW alaQoSVlanGroupStatus	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.50.1.3	RowStatus	read-create	Used to create/delete vlan group entries according to the RowStatus convention
alaQoSVlanGroupTable	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.50		not-accessible	Table of QoS Vlan Group definitions
I32 alaQoSVlanGroupVlan	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.50.1.1	Integer32	not-accessible	Vlan range start for vlan group entry
I32 alaQoSVlanGroupVlanEnd	1.3.6.1.4.1.6486.801.1.2.1.22.1.1.50.1.2	Integer32	not-accessible	Vlan range end for vlan group entry

RFC description

QoS and Filtering MIB for Alcatel IND networking devices.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-QOS-MIB