ALCATEL-IGMP-SNOOPING-MIB

All MIBs › ALCATEL-IGMP-SNOOPING-MIB

Organization: Alcatel-Lucent

Last Updated: 2008-01-01

Description: Alcatel-Lucent 7x50 service router MIB for managing IGMP snooping on service access points, SDP bindings, and multicast group filter policies

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IGMP-SNOOPING-MIB?

ALCATEL-IGMP-SNOOPING-MIB is an Alcatel-Lucent proprietary MIB for the 7x50 family of service routers, covering configuration and management of IGMP snooping — the feature that lets a service router intelligently forward IP multicast traffic only to interested ports. It exposes per-service configuration objects including administrative state, query interval, robustness count, and Multicast VLAN Registration (MVR) settings, along with policy objects controlling which multicast groups are permitted. Its monitoring role centers on multicast service configuration and operational state rather than classic hardware health: operators use it to verify IGMP snooping is administratively enabled where expected, confirm query timer and robustness settings match network design, and track when configuration last changed. It is closely tied to IETF IGMP (RFC 3376) and to Alcatel-Lucent's own service/SAP object model (VPLS/TLS service framework) that it plugs into. It is deployed on Alcatel-Lucent (Nokia) 7x50 service routers in triple-play/IPTV and enterprise multicast deployments where efficient multicast distribution over Ethernet VPLS services is required, and an ALCATEL-IGMP-SNOOPING-MIB download is available for administrators who need to load it directly into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IGMP-SNOOPING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent (Nokia) 7x50 service routers

Monitoring Examples

An administrator would poll tlsIgmpSnpgConfigTable/tlsIgmpSnpgConfigEntry per service to confirm tlsIgmpSnpgCfgAdminState is enabled and that tlsIgmpSnpgCfgGenQueryIntvl and tlsIgmpSnpgCfgRobustCount are set per the network's multicast design. Checking tlsIgmpSnpgCfgLastChangeTime helps correlate a reported IPTV channel-join problem with a recent, possibly unintended, configuration change, while tlsIgmpSnpgCfgMvrAdminState and tlsIgmpSnpgCfgMvrPolicy reveal whether Multicast VLAN Registration is active and which policy governs it.

What Can Be Monitored

IGMP snooping admin state per service
query interval and robustness count
multicast VLAN registration (MVR) state/policy
configuration last-change timestamp

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-GLOBAL-MIB

alcatelCommonMIBModules	OBJECT-IDENTITY
alcatelConformance	OBJECT-IDENTITY
alcatelNotifyPrefix	OBJECT-IDENTITY
alcatelObjects	OBJECT-IDENTITY

From TIMETRA-MCAST-CAC-MIB

tmnxMcacLagPortsDown	OBJECT-TYPE
tmnxMcacLevelId	OBJECT-TYPE

From TIMETRA-SAP-MIB

sapEncapValue	OBJECT-TYPE
sapPortId	OBJECT-TYPE

From TIMETRA-SDP-MIB

sdpBindId

OBJECT-TYPE

From TIMETRA-SERV-MIB

SdpId
svcId	OBJECT-TYPE

From TIMETRA-TC-MIB

TItemDescription
TPolicyStatementNameOrEmpty
TmnxAdminState
TmnxEncapVal
TmnxIgmpGroupFilterMode
TmnxIgmpGroupType
TmnxIgmpVersion
TmnxPortID
TmnxServId
TmnxVcIdOrNone

How to Use in IPNetwork Monitor

Example using sapIgmpSnpgTxGenQueries OID:

Select an Alcatel-Lucent (Nokia) 7x50 service router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type sapIgmpSnpgTxGenQueries into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of the object sapIgmpSnpgTxGenQueries indicates the number of IGMP General Queries transmitted on this SAP. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIgmpSnoopingMIBModule	1.3.6.1.4.1.6527.1.1.5.2			This document is the SNMP MIB module to manage and provision the IGMP snooping feature protocol for the Alcatel 7x50 device. Copyright 2004-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
alxIgmpSnoopingConformance	1.3.6.1.4.1.6527.3.3.1.2
alxIgmpSnoopingNotificationObjs	1.3.6.1.4.1.6527.3.3.2.2.4
alxIgmpSnoopingNotifyPrefix	1.3.6.1.4.1.6527.3.3.3.2
alxIgmpSnoopingObjs	1.3.6.1.4.1.6527.3.3.2.2
alxIgmpSnoopingSapCompliance	1.3.6.1.4.1.6527.3.3.1.2.2.1.1			The compliance statement for management of IGMP Snooping on SAP level on Alcatel 7x50 SR series systems.
alxIgmpSnoopingSapCompliancs	1.3.6.1.4.1.6527.3.3.1.2.2.1
alxIgmpSnoopingSapConformance	1.3.6.1.4.1.6527.3.3.1.2.2
alxIgmpSnoopingSapGroups	1.3.6.1.4.1.6527.3.3.1.2.2.2
alxIgmpSnoopingSapObjs	1.3.6.1.4.1.6527.3.3.2.2.2
alxIgmpSnoopingSapPrefix	1.3.6.1.4.1.6527.3.3.3.2.1
alxIgmpSnoopingSapV5v0Compliance	1.3.6.1.4.1.6527.3.3.1.2.2.1.2			The compliance statement for management of IGMP Snooping on SAP level on Alcatel 7x50 SR series systems release R5.0.
alxIgmpSnoopingSapV6v0Compliance	1.3.6.1.4.1.6527.3.3.1.2.2.1.3			The compliance statement for management of IGMP Snooping on SAP level on Alcatel 7x50 SR series systems since release R6.0.
alxIgmpSnoopingSapV6v1Compliance	1.3.6.1.4.1.6527.3.3.1.2.2.1.4			The compliance statement for management of IGMP Snooping on SAP level on Alcatel 7x50 SR series systems since release R6.1.
alxIgmpSnoopingSapV8v0Compliance	1.3.6.1.4.1.6527.3.3.1.2.2.1.5			The compliance statement for management of IGMP Snooping on SAP level on Alcatel 7x50 SR series systems since release R8.0.
alxIgmpSnoopingSdpBindObjs	1.3.6.1.4.1.6527.3.3.2.2.3
alxIgmpSnoopingSdpBndCompliance	1.3.6.1.4.1.6527.3.3.1.2.3.1.1			The compliance statement for management of IGMP Snooping on SDP Bind level on Alcatel 7x50 SR series systems.
alxIgmpSnoopingSdpBndCompliancs	1.3.6.1.4.1.6527.3.3.1.2.3.1
alxIgmpSnoopingSdpBndConformance	1.3.6.1.4.1.6527.3.3.1.2.3
alxIgmpSnoopingSdpBndGroups	1.3.6.1.4.1.6527.3.3.1.2.3.2
alxIgmpSnoopingSdpBndPrefix	1.3.6.1.4.1.6527.3.3.3.2.2
alxIgmpSnoopingSdpBndV5v0Compliance	1.3.6.1.4.1.6527.3.3.1.2.3.1.2			The compliance statement for management of IGMP Snooping on SDP Bind level on Alcatel 7x50 SR series systems release R5.0.
alxIgmpSnoopingSdpBndV6v0Compliance	1.3.6.1.4.1.6527.3.3.1.2.3.1.3			The compliance statement for management of IGMP Snooping on SDP Bind level on Alcatel 7x50 SR series systems since release R6.0.
alxIgmpSnoopingSdpBndV6v1Compliance	1.3.6.1.4.1.6527.3.3.1.2.3.1.4			The compliance statement for management of IGMP Snooping on SDP Bind level on Alcatel 7x50 SR series systems since release R6.1.
alxIgmpSnoopingTimeStampObjs	1.3.6.1.4.1.6527.3.3.2.2.5
alxIgmpSnoopingTlsCompliance	1.3.6.1.4.1.6527.3.3.1.2.1.1.1			The compliance statement for management of IGMP Snooping on Tls level on Alcatel 7x50 SR series systems.
alxIgmpSnoopingTlsCompliancs	1.3.6.1.4.1.6527.3.3.1.2.1.1
alxIgmpSnoopingTlsConformance	1.3.6.1.4.1.6527.3.3.1.2.1
alxIgmpSnoopingTlsGroups	1.3.6.1.4.1.6527.3.3.1.2.1.2
alxIgmpSnoopingTlsObjs	1.3.6.1.4.1.6527.3.3.2.2.1
alxIgmpSnoopingTlsV5v0Compliance	1.3.6.1.4.1.6527.3.3.1.2.1.1.2			The compliance statement for management of IGMP Snooping on Tls level on Alcatel 7x50 SR series systems.
alxIgmpSnoopingTlsV6v0Compliance	1.3.6.1.4.1.6527.3.3.1.2.1.1.3			The compliance statement for management of IGMP Snooping on Tls level on Alcatel 7x50 SR series systems.
IP alxIgmpSnpgGroupAddress	1.3.6.1.4.1.6527.3.3.2.2.4.1	IpAddress	accessible-for-notify	The value of the object alxIgmpSnpgGroupAddress indicates an IP multicast group address.
STR alxIgmpSnpgMcsFailureReason	1.3.6.1.4.1.6527.3.3.2.2.4.2	DisplayString	accessible-for-notify	The value of the object alxIgmpSnpgMcsFailureReason indicates the reason why the sapIgmpSnpgMcsFailure notification is sent.
alxIgmpSnpgSapNotifications	1.3.6.1.4.1.6527.3.3.3.2.1.0
alxIgmpSnpgSdpBndNotifications	1.3.6.1.4.1.6527.3.3.3.2.2.0
IP alxIgmpSnpgSourceAddress	1.3.6.1.4.1.6527.3.3.2.2.4.3	IpAddress	accessible-for-notify	The value of the object alxIgmpSnpgGroupAddress indicates an IP multicast source address.
alxSapIgmpSnpgConfigV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.1			The group of objects that allow to configure IGMP snooping parameters per SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgConfigV5v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.6			The group of objects that allow to configure IGMP snooping parameters per SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgConfigV8v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.13			The group of objects that allow to configure IGMP snooping parameters per SAP on releease 8.0 Alcatel 7x50 SR series systems.
alxSapIgmpSnpgGroupV3v0	1.3.6.1.4.1.6527.3.3.1.2.2.2.2			The group of objects that allow to monitor the IGMP snooping information that is collected for a given SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgMaxSrcsNotV6v1Grp	1.3.6.1.4.1.6527.3.3.1.2.2.2.12			The group of notifications supporting IGMP snooping on a SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgMaxSrcsV6v1Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.11			The group of objects that allow to configure IGMP snooping parameters per SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgNotV5v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.8			The group of notifications supporting IGMP snooping on a SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgStaticV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.3			The group of objects that allow to statically configure (S,G) memberships on a SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgStatsV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.4			The group of objects that allow to view statistics for IGMP snooping on a SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgStatsV5v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.7			The group of objects that allow to view statistics for IGMP snooping on a SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgStatsV6v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.10			The group of objects that allow to view statistics for IGMP snooping on a SAP on Alcatel 7x50 SR series systems.
alxSapIgmpSnpgTimeStampGroup	1.3.6.1.4.1.6527.3.3.1.2.2.2.9			The group of last change timestamps for IGMP snooping on a SAP on Alcatel 7x50 SR series systems.
alxSapMvrV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.2.2.5			The group of objects needed to support the MVR feature on a SAP on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgConfV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.3.2.1			The group of objects that allow to configure IGMP snooping parameters per SDP bind on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgConfV5v0Group	1.3.6.1.4.1.6527.3.3.1.2.3.2.5			The group of objects that allow to configure IGMP snooping parameters per SDP bind on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgMaxSrcsV6v1Grp	1.3.6.1.4.1.6527.3.3.1.2.3.2.10			The group of objects that allow to configure IGMP snooping parameters per SDP bind on Alcatel 7x50 SR series systems added in release 6.1R6.
alxSdpBindIgmpSnpgNotV5v0Group	1.3.6.1.4.1.6527.3.3.1.2.3.2.7			The group of notifications supporting IGMP snooping on an SDP Bind on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgNotV6v1Group	1.3.6.1.4.1.6527.3.3.1.2.3.2.12			The group of notifications supporting IGMP snooping on an SDP Bind on Alcatel 7x50 SR series systems added in release 6.1R6.
alxSdpBindIgmpSnpgStatsV3v0Grp	1.3.6.1.4.1.6527.3.3.1.2.3.2.4			The group of objects that allow to view statistics for IGMP snooping on a SDP Bind on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgStatsV5v0Grp	1.3.6.1.4.1.6527.3.3.1.2.3.2.6			The group of objects that allow to view statistics for IGMP snooping on a SDP Bind on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgStatsV6v0Grp	1.3.6.1.4.1.6527.3.3.1.2.3.2.9			The group of objects that allow to view statistics for IGMP snooping on a SDP Bind on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgStatV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.3.2.3			The group of objects that allow to statically configure (S,G) memberships on a SDP Bind on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgTimeStampGroup	1.3.6.1.4.1.6527.3.3.1.2.3.2.8			The group of last change timestamps for IGMP snooping on an SDP Bind on Alcatel 7x50 SR series systems.
alxSdpBindIgmpSnpgV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.3.2.2			The group of objects that allow to monitor the IGMP snooping information that is collected for a given SDP Bind on Alcatel 7x50 SR series systems.
alxTlsIgmpSnpgConfigV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.1.2.1			The group of objects supporting management of IGMP snooping on Tls level on Alcatel 7x50 SR series systems.
alxTlsIgmpSnpgConfigV6v0Group	1.3.6.1.4.1.6527.3.3.1.2.1.2.7			The group of objects supporting management of IGMP snooping on Tls level on Alcatel 7x50 SR series systems.
alxTlsIgmpSnpgMRouterV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.1.2.4			The group of objects that allow to monitor the IGMP multicast routers in the Tls service by the IGMP snooping device on Alcatel 7x50 SR series systems.
alxTlsIgmpSnpgNotifyObjsV6v1Grp	1.3.6.1.4.1.6527.3.3.1.2.1.2.9			The group of notification objects supporting management of IGMP snooping on Alcatel 7x50 SR series systems added in the 6.1R6 release.
alxTlsIgmpSnpgNotObjV5v0Group	1.3.6.1.4.1.6527.3.3.1.2.1.2.6			The group of notification objects supporting management of IGMP snooping on Alcatel 7x50 SR series systems.
alxTlsIgmpSnpgProxyV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.1.2.3			The group of objects that allow to monitor the IGMP snooping information that is being used by the system when it performs proxy reporting to the MRouter on Alcatel 7x50 SR series systems.
alxTlsIgmpSnpgQuerierV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.1.2.2			The group of objects that allow to monitor the IGMP querier in the Tls service by the IGMP snooping device on Alcatel 7x50 SR series systems.
alxTlsIgmpSnpgTimeStampGroup	1.3.6.1.4.1.6527.3.3.1.2.1.2.8			The group of last change timestamps for IGMP snooping on Tls level on Alcatel 7x50 SR series systems.
alxTlsMvrConfigV3v0Group	1.3.6.1.4.1.6527.3.3.1.2.1.2.5			The group of objects supporting management of MVR on Tls level on Alcatel 7x50 SR series systems.
T/F sapIgmpSnpgCfgDisRtrAlertChk	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.25	TruthValue	read-write	sapIgmpSnpgCfgDisRtrAlertChk is used to enable/disable router alert checking for IGMP messages received on this sap. If this flag is set to 'true', checking is disabled.
ALX sapIgmpSnpgCfgFastLeave	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.2	AlxIgmpSnpgAdminState	read-write	The value of the object sapIgmpSnpgCfgFastLeave specifies whether fast leave is allowed on this SAP. If set to 'enabled(1)', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout.
U32 sapIgmpSnpgCfgGenQueryIntvl	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.5	Unsigned32	read-write	The value of the object sapIgmpSnpgCfgGenQueryIntvl specifies the interval (in seconds) between two consecutive general queries sent by the system on this SAP. The value of this object is only meaningful when the value of sapIgmpSnpgCfgSendQueries is 'enabled(1)'.
TPO sapIgmpSnpgCfgImportPlcy	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.1	TPolicyStatementNameOrEmpty	read-write	The value of the object sapIgmpSnpgCfgImportPlcy specifies the policy statement that must be applied to all incoming IGMP messages on this SAP.
TIM sapIgmpSnpgCfgLastChangeTime	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.23	TimeStamp	read-only	The value of the object sapIgmpSnpgCfgLastChangeTime indicates the sysUpTime at the time of the last modification of this entry.
U32 sapIgmpSnpgCfgLastMembIntvl	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.8	Unsigned32	read-write	The value of the object sapIgmpSnpgCfgLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.
INT sapIgmpSnpgCfgMaxNbrGrps	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.9	INTEGER	read-write	The value of the object sapIgmpSnpgCfgMaxNbrGrps specifies how many group addresses are allowed for this SAP. The value 0 means that no limit is imposed.
U32 sapIgmpSnpgCfgMaxNbrSrcs	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.24	Unsigned32	read-write	The value of the object sapIgmpSnpgCfgMaxNbrSrcs specifies how many source addresses are allowed per group address for this SAP. The value 0 means that no limit is imposed.
U32 sapIgmpSnpgCfgMcacAvailMandBw	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.20	Unsigned32	read-only	The value of sapIgmpSnpgCfgMcacAvailMandBw indicates the pre-reserved bandwidth in kilo-bits per second(kbps) for the mandatory channels for this interface instance.
U32 sapIgmpSnpgCfgMcacAvailOpnlBw	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.21	Unsigned32	read-only	The value of sapIgmpSnpgCfgMcacAvailOpnlBw indicates the available bandwidth in kilo-bits per second(kbps) for this interface instance.
TMN sapIgmpSnpgCfgMcacConstAdmSt	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.16	TmnxAdminState	read-write	The value of sapIgmpSnpgCfgMcacConstAdmSt specifies the administrative state of the multicast CAC policy's constraints.
U32 sapIgmpSnpgCfgMcacinUseMandBw	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.18	Unsigned32	read-only	The value of sapIgmpSnpgCfgMcacinUseMandBw indicates the in-use bandwidth in kilo-bits per second(kbps) for the mandatory channels for this protocol interface instance.
U32 sapIgmpSnpgCfgMcacinUseOpnlBw	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.19	Unsigned32	read-only	The value of sapIgmpSnpgCfgMcacinUseOpnlBw indicates the in-use bandwidth in kilo-bits per second(kbps) for the optional channels for this protocol interface instance.
TIM sapIgmpSnpgCfgMcacLagLastChangeT	1.3.6.1.4.1.6527.3.3.2.2.2.7.1.3	TimeStamp	read-only	The value of the object sapIgmpSnpgCfgMcacLagLastChangeT indicates the sysUpTime at the time of the last modification of this entry.
U32 sapIgmpSnpgCfgMcacLagLevel	1.3.6.1.4.1.6527.3.3.2.2.2.7.1.2	Unsigned32	read-create	The value of sapIgmpSnpgCfgMcacLagLevel specifies the level id to use when the value of tmnxMcacLagPortsDown matches the actual number of ports down in a lag. Using the value of sapIgmpSnpgCfgMcacLagLevel as an index, the operational SAP unconstrained bandwidth will be set to sapIgmpSnpgCfgMcacLevelBW. By default, for all lag constraints the link level will be set to 1 at row creation.
ROW sapIgmpSnpgCfgMcacLagRowStat	1.3.6.1.4.1.6527.3.3.2.2.2.7.1.1	RowStatus	read-create	The value of sapIgmpSnpgCfgMcacLagRowStat is used for creation/deletion of lag constraint in a CAC policy.
U32 sapIgmpSnpgCfgMcacLevelBW	1.3.6.1.4.1.6527.3.3.2.2.2.6.1.2	Unsigned32	read-create	The value of sapIgmpSnpgCfgMcacLevelBW specifies the bandwidth in kilo-bits per second (kbps) for the level.
TIM sapIgmpSnpgCfgMcacLevelLastChngT	1.3.6.1.4.1.6527.3.3.2.2.2.6.1.3	TimeStamp	read-only	The value of the object sapIgmpSnpgCfgMcacLevelLastChngT indicates the sysUpTime at the time of the last modification of this entry.
ROW sapIgmpSnpgCfgMcacLevelRowStat	1.3.6.1.4.1.6527.3.3.2.2.2.6.1.1	RowStatus	read-create	The value of sapIgmpSnpgCfgMcacLevelRowStat is used for creation/deletion of level constraint in a CAC policy.
TPO sapIgmpSnpgCfgMcacPolicyName	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.14	TPolicyStatementNameOrEmpty	read-write	The value of sapIgmpSnpgCfgMcacPolicyName specifies the name of the multicast CAC (Connection Admission Control) policy.
I32 sapIgmpSnpgCfgMcacPrRsvMndBW	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.17	Integer32	read-write	The value of sapIgmpSnpgCfgMcacPrRsvMndBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilo-bits per second(kbps). If the value of sapIgmpSnpgCfgMcacUnconstBW is '0', no mandatory channels are allowed. If the value of sapIgmpSnpgCfgMcacPrRsvMndBW is '-1', then all mandatory and optional channels are allowed. If the value of sapIgmpSnpgCfgMcacPrRsvMndBW is equal to the value of sapIgmpSnpgCfgMcacUnconstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of sapIgmpSnpgCfgMcacPrRsvMndBW should always be less than or equal to that of sapIgmpSnpgCfgMcacUnconstBW. An attempt to set the value of sapIgmpSnpgCfgMcacPrRsvMndBW greater than that of sapIgmpSnpgCfgMcacUnconstBW will result in inconsistent value error.
I32 sapIgmpSnpgCfgMcacUnconstBW	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.15	Integer32	read-write	The value of sapIgmpSnpgCfgMcacUnconstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilo-bits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of sapIgmpSnpgCfgMcacUnconstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface.
T/F sapIgmpSnpgCfgMcacValInTrans	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.22	TruthValue	read-only	The value of sapIgmpSnpgCfgMcacValInTrans indicates that the operational (available and in-use mandatory/optional) value for the following objects are in transition due to configuration change: sapIgmpSnpgCfgMcacinUseMandBw sapIgmpSnpgCfgMcacinUseOpnlBw sapIgmpSnpgCfgMcacAvailMandBw sapIgmpSnpgCfgMcacAvailOpnlBw When multicast CAC Policy is applied on the interface for the join of the next channel, the operational values will be recalculated and applied to the above objects and the value for sapIgmpSnpgCfgMcacValInTrans will be set to 'false(2)'. If the value of sapIgmpSnpgCfgMcacValInTrans is 'true(1)' then the values are in transition.
T/F sapIgmpSnpgCfgMRouter	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.3	TruthValue	read-write	The value of the object sapIgmpSnpgCfgMRouter specifies whether a multicast router is attached behind this SAP. If sapIgmpSnpgCfgSendQueries is set to 'enabled(1)', the system acts as if this object was set to 'false(2)'.
TMN sapIgmpSnpgCfgMvrFromVplsId	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.10	TmnxServId	read-write	The value of the object sapIgmpSnpgCfgMvrFromVplsId specifies from which Tls the multicast streams corresponding to the groups learned via this SAP are copied. Groups which cannot be joined to the corresponding MVR Tls (because MVR is not up or the configured MVR policy rejects the group) copy the multicast streams from the local Tls if IGMP snooping is up (i.e. tlsIgmpSnpgCfgAdminState is 'enabled(1)').
TMN sapIgmpSnpgCfgMvrToSapEncapVal	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.12	TmnxEncapVal	read-write	The value of the object sapIgmpSnpgCfgMvrToSapEncapVal specifies, together with sapIgmpSnpgCfgMvrToSapPortId, the SAP to which the multicast streams corresponding to the groups learned via this SAP are copied. As a consequence, the streams will not exit this SAP anymore.
TMN sapIgmpSnpgCfgMvrToSapPortId	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.11	TmnxPortID	read-write	The value of the object sapIgmpSnpgCfgMvrToSapPortId specifies, together with sapIgmpSnpgCfgMvrToSapEncapVal, the SAP to which the multicast streams corresponding to the groups learned via this SAP are copied. As a consequence, the streams will not exit this SAP anymore.
U32 sapIgmpSnpgCfgQueryRespIntvl	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.6	Unsigned32	read-write	The value of the object sapIgmpSnpgCfgQueryRespIntvl specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of sapIgmpSnpgCfgSendQueries is 'enabled(1)'.
U32 sapIgmpSnpgCfgRobustCount	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.7	Unsigned32	read-write	The value of the object sapIgmpSnpgCfgRobustCount specifies the robustness variable on this SAP. This object allows tuning for the expected packet loss on this SAP. If a SAP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of sapIgmpSnpgCfgSendQueries is 'enabled(1)'.
ALX sapIgmpSnpgCfgSendQueries	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.4	AlxIgmpSnpgAdminState	read-write	The value of the object sapIgmpSnpgCfgSendQueries specifies whether the system generates General Queries by itself on this SAP.
TMN sapIgmpSnpgCfgVersion	1.3.6.1.4.1.6527.3.3.2.2.2.1.1.13	TmnxIgmpVersion	read-write	The value of the object sapIgmpSnpgCfgVersion specifies the version of IGMP running on this SAP.
sapIgmpSnpgConfigEntry	1.3.6.1.4.1.6527.3.3.2.2.2.1.1		not-accessible	Each row contains IGMP snooping configuration parameters for a SAP within a Tls. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon creation of a new SAP (sapTlsInfoTable). The entry is destroyed when the SAP or Tls service is removed.
sapIgmpSnpgConfigTable	1.3.6.1.4.1.6527.3.3.2.2.2.1		not-accessible	The sapIgmpSnpgConfigTable contains objects to configure the IGMP snooping feature on a SAP within a Tls.
TIM sapIgmpSnpgConfigTableLastChange	1.3.6.1.4.1.6527.3.3.2.2.5.2	TimeStamp	read-only	The value of the object sapIgmpSnpgConfigTableLastChange indicates the value of sysUpTime at the time of the last modification of an entry in the sapIgmpSnpgConfigTable.
C32 sapIgmpSnpgFwdGenQueries	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.16	Counter32	read-only	The value of the object sapIgmpSnpgFwdGenQueries indicates the number of IGMP General Queries forwarded on this SAP.
C32 sapIgmpSnpgFwdGrpSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.17	Counter32	read-only	The value of the object sapIgmpSnpgFwdGrpSpecQueries indicates the number of IGMP Group-Specific Queries forwarded on this SAP.
C32 sapIgmpSnpgFwdSrcSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.18	Counter32	read-only	The value of the object sapIgmpSnpgFwdSrcSpecQueries indicates the number of IGMP Group-And-Source-Specific Queries forwarded on this SAP.
C32 sapIgmpSnpgFwdUnknownType	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.23	Counter32	read-only	The value of the object sapIgmpSnpgFwdUnknownType indicates the number of IGMP unknown type packets forwarded on this SAP.
C32 sapIgmpSnpgFwdV1Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.19	Counter32	read-only	The value of the object sapIgmpSnpgFwdV1Reports indicates the number of IGMPv1 Reports forwarded on this SAP.
C32 sapIgmpSnpgFwdV2Leaves	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.22	Counter32	read-only	The value of the object sapIgmpSnpgFwdV2Leaves indicates the number of IGMPv2 Leaves forwarded on this SAP.
C32 sapIgmpSnpgFwdV2Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.20	Counter32	read-only	The value of the object sapIgmpSnpgFwdV2Reports indicates the number of IGMPv2 Reports forwarded on this SAP.
C32 sapIgmpSnpgFwdV3Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.21	Counter32	read-only	The value of the object sapIgmpSnpgFwdV3Reports indicates the number of IGMPv3 Reports forwarded on this SAP.
sapIgmpSnpgGroupEntry	1.3.6.1.4.1.6527.3.3.2.2.2.2.1		not-accessible	Each entry in this table indicates a multicast group address learned by IGMP snooping on this SAP. If a Source list is present it is described in the corresponding entries of the sapIgmpSnpgGrpSrcTable table.
sapIgmpSnpgGroupTable	1.3.6.1.4.1.6527.3.3.2.2.2.2		not-accessible	sapIgmpSnpgGroupTable together with the table sapIgmpSnpgGrpSrcTable contains multicast group address information collected by IGMP snooping for each SAP.
IP sapIgmpSnpgGrpAddress	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.1	IpAddress	not-accessible	The value of the object sapIgmpSnpgGrpAddress indicates the IPv4 multicast group address for which this entry contains information.
U32 sapIgmpSnpgGrpCompatMode	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.6	Unsigned32	read-only	The value of the object sapIgmpSnpgGrpCompatMode indicates the IGMP version applicable on this SAP for this multicast group address. This corresponds to the lowest version seen for this group address on this SAP.
U32 sapIgmpSnpgGrpExpiryTime	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.5	Unsigned32	read-only	The value of the object sapIgmpSnpgGrpExpiryTime indicates the amount of time remaining before this entry will be aged out.
TMN sapIgmpSnpgGrpFilterMode	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.3	TmnxIgmpGroupFilterMode	read-only	The value of the object sapIgmpSnpgGrpFilterMode indicates the filter-mode for this group.
NTF sapIgmpSnpgGrpLimitExceeded	1.3.6.1.4.1.6527.3.3.3.2.1.0.1			The sapIgmpSnpgGrpLimitExceeded notification is generated when an IGMP group is dropped on a given SAP because a user configurable upper limit given by sapIgmpSnpgCfgMaxNbrGrps is reached.
TMN sapIgmpSnpgGrpMvrFromVplsId	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.9	TmnxServId	read-only	The value of the object sapIgmpSnpgGrpMvrFromVplsId indicates from which Tls the multicast streams corresponding to this group are copied. A value of 0 means that MVR is not applicable for this group and the corresponding streams are copied from the local Tls.
TMN sapIgmpSnpgGrpMvrToSapEncapVal	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.11	TmnxEncapVal	read-only	The value of the object sapIgmpSnpgGrpMvrToSapEncapVal indicates, together with sapIgmpSnpgGrpMvrToSapPortId, to which SAP the multicast streams corresponding to this group are copied. If both values are 0, the corresponding streams are copied to this local SAP.
TMN sapIgmpSnpgGrpMvrToSapPortId	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.10	TmnxPortID	read-only	The value of the object sapIgmpSnpgGrpMvrToSapPortId indicates together with sapIgmpSnpgGrpMvrToSapEncapVal, to which SAP the multicast streams corresponding to this group are copied. If both values are 0, the corresponding streams are copied to this local SAP.
IP sapIgmpSnpgGrpSrcAddr	1.3.6.1.4.1.6527.3.3.2.2.2.3.1.1	IpAddress	not-accessible	The value of the object sapIgmpSnpgGrpSrcAddr indicates the address of the Source sending multicast traffic to the group identified by sapIgmpSnpgGrpAddress. If the value of sapIgmpSnpgGrpFilterMode corresponding to this entry is 'include(1)', the receivers are interested in receiving traffic from this Source. If the value of sapIgmpSnpgGrpFilterMode corresponding to this entry is 'exclude(2)', the receivers are not interested in receiving traffic from this Source.
sapIgmpSnpgGrpSrcEntry	1.3.6.1.4.1.6527.3.3.2.2.2.3.1		not-accessible	An entry in the sapIgmpSnpgGrpSrcTable. Each entry represents a Source address from which receivers are interested/not interested in receiving multicast traffic from.
U32 sapIgmpSnpgGrpSrcExpiryTime	1.3.6.1.4.1.6527.3.3.2.2.2.3.1.4	Unsigned32	read-only	The value of the object sapIgmpSnpgGrpSrcExpiryTime indicates the minimum amount of time remaining before this entry will be aged out. If the value of sapIgmpSnpgGrpSrcExpiryTime is non-zero and the value of sapIgmpSnpgGrpFilterMode corresponding to this entry is 'include(1)', it means that there are currently one or more systems which desire to receive multicast traffic for this Source. If this timer expires and the value of sapIgmpSnpgGrpFilterMode is 'include(1)', the system concludes that traffic from this particular Source is no longer desired on the attached network, and deletes this entry. If the value of sapIgmpSnpgGrpSrcExpiryTime is non-zero and the filter-mode for the group is 'exclude(2)', it means that at least one system desires to receive multicast traffic from this source. If the value of sapIgmpSnpgGrpSrcExpiryTime is zero and the filter-mode for the group is 'exclude(2)', it means that no system desires to receive multicast traffic from this Source.
sapIgmpSnpgGrpSrcTable	1.3.6.1.4.1.6527.3.3.2.2.2.3		not-accessible	sapIgmpSnpgGrpSrcTable lists the IPv4 multicast Sources corresponding to the IPv4 multicast groups listed in the sapIgmpSnpgGroupTable.
TMN sapIgmpSnpgGrpSrcType	1.3.6.1.4.1.6527.3.3.2.2.2.3.1.2	TmnxIgmpGroupType	read-only	The value of the object sapIgmpSnpgGrpSrcType indicates how this source entry was learned. If this source entry was learned, it is set to 'dynamic(2)'. For statically configured sources, the value is set to 'static(1)'.
TIK sapIgmpSnpgGrpSrcUpTime	1.3.6.1.4.1.6527.3.3.2.2.2.3.1.3	TimeTicks	read-only	The value of the object sapIgmpSnpgGrpSrcUpTime indicates how long (in hundredths of a second) that the Source address already exists in the database for this SAP.
TMN sapIgmpSnpgGrpType	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.2	TmnxIgmpGroupType	read-only	The value of the object sapIgmpSnpgGrpType indicates whether this entry was learned dynamically or was statically configured.
TIK sapIgmpSnpgGrpUpTime	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.4	TimeTicks	read-only	The value of the object sapIgmpSnpgGrpUpTime indicates how long (in hundredths of a second) that the group address already exists in the database for this SAP.
U32 sapIgmpSnpgGrpV1HostExpTime	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.7	Unsigned32	read-only	The value of the object sapIgmpSnpgGrpV1HostExpTime indicates the time remaining until the system will assume that there are no longer any IGMPv1 members on this SAP. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership interval. While this time remaining is non-zero, the system ignores any IGMPv2 and IGMPv3 'leave' messages for this group that it receives on this SAP.
U32 sapIgmpSnpgGrpV2HostExpTime	1.3.6.1.4.1.6527.3.3.2.2.2.2.1.8	Unsigned32	read-only	The value of the object sapIgmpSnpgGrpV2HostExpTime indicates the time remaining until the system will assume that there are no longer any IGMPv2 members on the SAP. Upon hearing any IGMPv2 Membership Report, this value is reset to the group membership interval. While this time remaining is non-zero, the system ignores any IGMPv3 'leave' messages for this group that it receives on this SAP.
C32 sapIgmpSnpgImportPolicyDrops	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.31	Counter32	read-only	The value of the object sapIgmpSnpgImportPolicyDrops indicates the number of times an IGMP Group or Source is dropped because of applying an import policy on this SAP.
C32 sapIgmpSnpgMaxNumGroupsDrops	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.32	Counter32	read-only	The value of the object sapIgmpSnpgMaxNumGroupsDrops indicates the number of times an IGMP Group is dropped because of exceeding the configured maximum number of groups on this SAP.
C32 sapIgmpSnpgMaxNumSourcesDrops	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.40	Counter32	read-only	The value of the object sapIgmpSnpgMaxNumSourcesDrops indicates the number of times an IGMP Source is dropped because of exceeding the configured maximum number of sources per group on this SAP.
sapIgmpSnpgMcacLagEntry	1.3.6.1.4.1.6527.3.3.2.2.2.7.1		not-accessible	Each row entry represents a particular multicast CAC lag port constraints. Entries are created/deleted by the user.
sapIgmpSnpgMcacLagTable	1.3.6.1.4.1.6527.3.3.2.2.2.7		not-accessible	The sapIgmpSnpgMcacLagTable has an entry for each lag port configured for a multicast CAC policy bundle on this system.
TIM sapIgmpSnpgMcacLagTableLastChng	1.3.6.1.4.1.6527.3.3.2.2.5.5	TimeStamp	read-only	The value of the object sapIgmpSnpgMcacLagTableLastChng indicates the value of sysUpTime at the time of the last modification of an entry in the sapIgmpSnpgMcacLagTable.
sapIgmpSnpgMcacLevelEntry	1.3.6.1.4.1.6527.3.3.2.2.2.6.1		not-accessible	Each row entry represents a particular multicast CAC policy bundle level constraints. Entries are created/deleted by the user.
sapIgmpSnpgMcacLevelTable	1.3.6.1.4.1.6527.3.3.2.2.2.6		not-accessible	The sapIgmpSnpgMcacLevelTable has an entry for each multicast CAC policy constraint level configured on this system.
TIM sapIgmpSnpgMcacLevelTableLstCh	1.3.6.1.4.1.6527.3.3.2.2.5.4	TimeStamp	read-only	The value of the object sapIgmpSnpgMcacLevelTableLstCh indicates the value of sysUpTime at the time of the last modification of an entry in the sapIgmpSnpgMcacLevelTable.
NTF sapIgmpSnpgMcacPlcyDropped	1.3.6.1.4.1.6527.3.3.3.2.1.0.2			The sapIgmpSnpgMcacPlcyDropped notification is generated when an IGMP group is dropped on a given SAP because of applying a multicast CAC policy given by sapIgmpSnpgCfgMcacPolicyName.
C32 sapIgmpSnpgMcacPolicyDrops	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.36	Counter32	read-only	The value of the object sapIgmpSnpgMcacPolicyDrops indicates the number of times an IGMP Group is dropped because of applying a multicast CAC policy on this SAP.
NTF sapIgmpSnpgMcsFailure	1.3.6.1.4.1.6527.3.3.3.2.1.0.3			The sapIgmpSnpgMcsFailure notification is generated when an IGMP group on a given SAP could not be synced to the MCS (multi-chassis synchronization) database.
C32 sapIgmpSnpgMcsFailures	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.37	Counter32	read-only	The value of the object sapIgmpSnpgMcsFailures indicates the number of times an IGMP Group on this SAP could not be synced to the MCS (multi-chassis synchronization) database.
C32 sapIgmpSnpgMvrFromVplsCfgDrops	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.33	Counter32	read-only	The value of the object sapIgmpSnpgMvrFromVplsCfgDrops indicates the number of times an IGMP Group or Query is dropped because of applying the sapIgmpSnpgCfgMvrFromVplsId configuration on this SAP.
C32 sapIgmpSnpgMvrToSapCfgDrops	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.34	Counter32	read-only	The value of the object sapIgmpSnpgMvrToSapCfgDrops indicates the number times an IGMP Report or Query is dropped because of applying the sapIgmpSnpgCfgMvrToSapPortId and sapIgmpSnpgCfgMvrToSapEncapVal configuration on this SAP.
C32 sapIgmpSnpgRxBadEncodedPkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.27	Counter32	read-only	The value of the object sapIgmpSnpgRxBadEncodedPkts indicates the number of IGMP packets dropped on this SAP because of a bad encoding.
C32 sapIgmpSnpgRxBadIgmpChksmPkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.26	Counter32	read-only	The value of the object sapIgmpSnpgRxBadIgmpChksmPkts indicates the number of dropped IGMP packets on this SAP because of a bad IGMP header checksum.
C32 sapIgmpSnpgRxBadIpChksmPkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.25	Counter32	read-only	The value of the object sapIgmpSnpgRxBadIpChksmPkts indicates the number of dropped IGMP packets on this SAP because of a bad IPv4 header checksum.
C32 sapIgmpSnpgRxBadLenPkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.24	Counter32	read-only	The value of the object sapIgmpSnpgRxBadLenPkts indicates the number of IGMP packets dropped on this SAP because of a bad length.
C32 sapIgmpSnpgRxGenQueries	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.8	Counter32	read-only	The value of the object sapIgmpSnpgRxGenQueries indicates the number of IGMP General Queries received on this SAP.
C32 sapIgmpSnpgRxGrpSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.9	Counter32	read-only	The value of the object sapIgmpSnpgRxGrpSpecQueries indicates the number of IGMP Group-Specific Queries received on this SAP.
C32 sapIgmpSnpgRxLocalScopePkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.38	Counter32	read-only	The value of the object sapIgmpSnpgRxLocalScopePkts indicates the number of IGMP packets received on the link-local scope IPv6 multicast address.
C32 sapIgmpSnpgRxNoRtrAlertPkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.28	Counter32	read-only	The value of the object sapIgmpSnpgRxNoRtrAlertPkts indicates the number of IGMP packets dropped on this SAP because the Router Alert Option in the IP packet is not set.
C32 sapIgmpSnpgRxRsvdScopePkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.39	Counter32	read-only	The value of the object sapIgmpSnpgRxRsvdScopePkts indicates the number of IGMP packets received on the reserved scope IPv6 multicast address.
C32 sapIgmpSnpgRxSrcSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.10	Counter32	read-only	The value of the object sapIgmpSnpgRxSrcSpecQueries indicates the number of IGMP Group-And-Source-Specific Queries received on this SAP.
C32 sapIgmpSnpgRxUnknownType	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.15	Counter32	read-only	The value of the object sapIgmpSnpgRxUnknownType indicates the number of IGMP unknown type packets received on this SAP.
C32 sapIgmpSnpgRxV1Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.11	Counter32	read-only	The value of the object sapIgmpSnpgRxV1Reports indicates the number of IGMPv1 Reports received on this SAP.
C32 sapIgmpSnpgRxV2Leaves	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.14	Counter32	read-only	The value of the object sapIgmpSnpgRxV2Leaves indicates the number of IGMPv2 Leaves received on this SAP.
C32 sapIgmpSnpgRxV2Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.12	Counter32	read-only	The value of the object sapIgmpSnpgRxV2Reports indicates the number of IGMPv2 Reports received on this SAP.
C32 sapIgmpSnpgRxV3Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.13	Counter32	read-only	The value of the object sapIgmpSnpgRxV3Reports indicates the number of IGMPv3 Reports received on this SAP.
C32 sapIgmpSnpgRxWrongVersionPkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.35	Counter32	read-only	The value of the object sapIgmpSnpgRxWrongVersionPkts indicates the total number of IGMP packets with a wrong version received on this SAP.
C32 sapIgmpSnpgRxZeroSrcAdrPkts	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.29	Counter32	read-only	The value of the object sapIgmpSnpgRxZeroSrcAdrPkts indicates the number of IGMP packets dropped on this SAP because they contain a zero source IPv4 address.
C32 sapIgmpSnpgSendQueryCfgDrops	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.30	Counter32	read-only	The value of the object sapIgmpSnpgSendQueryCfgDrops indicates the number of times an IGMP Query is dropped because the object sapIgmpSnpgCfgSendQueries for this SAP is set to 'enabled(1)'.
NTF sapIgmpSnpgSrcLimitExceeded	1.3.6.1.4.1.6527.3.3.3.2.1.0.4			The sapIgmpSnpgSrcLimitExceeded notification is generated when an IGMP source is dropped dropped on a given SAP because a user configurable upper limit given by sapIgmpSnpgCfgMaxNbrSrcs is reached.
IP sapIgmpSnpgStaticGroupAddr	1.3.6.1.4.1.6527.3.3.2.2.2.4.1.1	IpAddress	not-accessible	The value of the object sapIgmpSnpgStaticGroupAddr specifies the group multicast address for this statically configured (S,G) entry for this SAP.
sapIgmpSnpgStaticGrpSrcEntry	1.3.6.1.4.1.6527.3.3.2.2.2.4.1		not-accessible	An entry in the sapIgmpSnpgStaticGrpSrcTable. Entries can be created or deleted by an SNMP SET request to sapIgmpSnpgStaticRowstatus.
sapIgmpSnpgStaticGrpSrcTable	1.3.6.1.4.1.6527.3.3.2.2.2.4		not-accessible	The table sapIgmpSnpgStaticGrpSrcTable contains statically configured (S,G) entries for each SAP.
TIM sapIgmpSnpgStaticGrpSrcTablLstCh	1.3.6.1.4.1.6527.3.3.2.2.5.3	TimeStamp	read-only	The value of the object sapIgmpSnpgStaticGrpSrcTablLstCh indicates the value of sysUpTime at the time of the last modification of an entry in the sapIgmpSnpgStaticGrpSrcTable.
TIM sapIgmpSnpgStaticLastChangeTime	1.3.6.1.4.1.6527.3.3.2.2.2.4.1.4	TimeStamp	read-only	The value of the object sapIgmpSnpgStaticLastChangeTime indicates the sysUpTime at the time of the last modification of this entry.
ROW sapIgmpSnpgStaticRowstatus	1.3.6.1.4.1.6527.3.3.2.2.2.4.1.3	RowStatus	read-create	The value of the object sapIgmpSnpgStaticRowstatus specifies the row status used for creation or deletion of sapIgmpSnpgStaticGrpSrcTable entries.
IP sapIgmpSnpgStaticSourceAddr	1.3.6.1.4.1.6527.3.3.2.2.2.4.1.2	IpAddress	not-accessible	The value of the object sapIgmpSnpgStaticSourceAddr specifies the Source IP address for this statically configured (S,G) entry for this SAP. For a (*,G) entry this object must be set to 0.0.0.0.
sapIgmpSnpgStatsEntry	1.3.6.1.4.1.6527.3.3.2.2.2.5.1		not-accessible	sapIgmpSnpgStatsEntry is an entry in the sapIgmpSnpgStatsTable. Each entry contains IGMP snooping statics for a SAP in a Tls.
sapIgmpSnpgStatsTable	1.3.6.1.4.1.6527.3.3.2.2.2.5		not-accessible	sapIgmpSnpgStatsTable contains statistics on IGMP snooping per SAP.
C32 sapIgmpSnpgTxGenQueriesEx	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.1	Counter32	read-only	The value of the object sapIgmpSnpgTxGenQueries indicates the number of IGMP General Queries transmitted on this SAP.
C32 sapIgmpSnpgTxGrpSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.2	Counter32	read-only	The value of the object sapIgmpSnpgTxGrpSpecQueries indicates the number of IGMP Group-Specific Queries transmitted on this SAP.
C32 sapIgmpSnpgTxSrcSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.3	Counter32	read-only	The value of the object sapIgmpSnpgTxSrcSpecQueries indicates the number of IGMP Group-And-Source-Specific Queries transmitted on this SAP.
C32 sapIgmpSnpgTxV1Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.4	Counter32	read-only	The value of the object sapIgmpSnpgTxV1Reports indicates the number of IGMPv1 Reports transmitted on this SAP.
C32 sapIgmpSnpgTxV2Leaves	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.7	Counter32	read-only	The value of the object sapIgmpSnpgTxV2Leaves indicates the number of IGMPv2 Leaves transmitted on this SAP.
C32 sapIgmpSnpgTxV2Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.5	Counter32	read-only	The value of the object sapIgmpSnpgTxV2Reports indicates the number of IGMPv2 Reports transmitted on this SAP.
C32 sapIgmpSnpgTxV3Reports	1.3.6.1.4.1.6527.3.3.2.2.2.5.1.6	Counter32	read-only	The value of the object sapIgmpSnpgTxV3Reports indicates the number of IGMPv3 Reports transmitted on this SAP.
sdpBindIgmpSnpgConfigEntry	1.3.6.1.4.1.6527.3.3.2.2.3.1.1		not-accessible	Each row contains IGMP snooping configuration parameters for an SDP bind within a Tls. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon creation of a new SDP Bind (sdpBindTlsEntry). The entry is destroyed when the SDP or Tls service is removed.
sdpBindIgmpSnpgConfigTable	1.3.6.1.4.1.6527.3.3.2.2.3.1		not-accessible	The table sdpBindIgmpSnpgConfigTable contains objects to configure the IGMP snooping feature on an SDP Bind within a Tls.
TIM sdpBindIgmpSnpgConfigTableLstCh	1.3.6.1.4.1.6527.3.3.2.2.5.6	TimeStamp	read-only	The value of the object sdpBindIgmpSnpgConfigTableLstCh indicates the value of sysUpTime at the time of the last modification of an entry in the sdpBindIgmpSnpgConfigTable.
sdpBindIgmpSnpgGroupEntry	1.3.6.1.4.1.6527.3.3.2.2.3.2.1		not-accessible	Each entry in this table indicates a multicast group address learned by IGMP snooping on this SDP Bind. If a Source list is present it is described in the corresponding entries of the sdpBindIgmpSnpgGrpSrcTable table.
sdpBindIgmpSnpgGroupTable	1.3.6.1.4.1.6527.3.3.2.2.3.2		not-accessible	sdpBindIgmpSnpgGroupTable together with the table sdpBindIgmpSnpgGrpSrcTable contains multicast group address information collected by IGMP snooping for each SDP Bind.
sdpBindIgmpSnpgGrpSrcEntry	1.3.6.1.4.1.6527.3.3.2.2.3.3.1		not-accessible	An entry in the sdpBindIgmpSnpgGrpSrcTable. Each entry represents a Source address from which receivers are interested/not interested in receiving multicast traffic from.
sdpBindIgmpSnpgGrpSrcTable	1.3.6.1.4.1.6527.3.3.2.2.3.3		not-accessible	sdpBindIgmpSnpgGrpSrcTable lists the IPv4 multicast Sources corresponding to the IPv4 multicast groups listed in the sdpBindIgmpSnpgGroupTable.
sdpBindIgmpSnpgStatGrpSrcEntry	1.3.6.1.4.1.6527.3.3.2.2.3.4.1		not-accessible	An entry in the sdpBindIgmpSnpgStaticGrpSrcTable. Entries can be created or deleted by an SNMP SET request to sdpBndIgmpSnpgStaticRowstatus.
sdpBindIgmpSnpgStaticGrpSrcTable	1.3.6.1.4.1.6527.3.3.2.2.3.4		not-accessible	The table sdpBindIgmpSnpgStaticGrpSrcTable contains statically configured (S,G) entries for each SDP Bind.
TIM sdpBindIgmpSnpgStaticGrpSrcTblLC	1.3.6.1.4.1.6527.3.3.2.2.5.7	TimeStamp	read-only	The value of the object sdpBindIgmpSnpgStaticGrpSrcTblLC indicates the value of sysUpTime at the time of the last modification of an entry in the sdpBindIgmpSnpgStaticGrpSrcTable.
sdpBindIgmpSnpgStatsEntry	1.3.6.1.4.1.6527.3.3.2.2.3.5.1		not-accessible	sdpBindIgmpSnpgStatsEntry is an entry in the sdpBindIgmpSnpgStatsTable. Each entry contains IGMP snooping statics for a SDP Bind in a Tls.
sdpBindIgmpSnpgStatsTable	1.3.6.1.4.1.6527.3.3.2.2.3.5		not-accessible	sdpBindIgmpSnpgStatsTable contains statistics on IGMP snooping per SDP Bind.
T/F sdpBndIgmpSnpgCfgDisRtrAlertChk	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.21	TruthValue	read-write	sdpBndIgmpSnpgCfgDisRtrAlertChk is used to enable/disable router alert checking for IGMP messages received on this sdp. If this flag is set to 'true', checking is disabled.
ALX sdpBndIgmpSnpgCfgFastLeave	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.2	AlxIgmpSnpgAdminState	read-write	The value of the object sdpBndIgmpSnpgCfgFastLeave specifies whether or not fastleave is allowed on this SDP bind. If set to 'enabled(1)', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout.
U32 sdpBndIgmpSnpgCfgGenQueryIntvl	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.5	Unsigned32	read-write	The value of the object sdpBndIgmpSnpgCfgGenQueryIntvl specifies the interval (in seconds) between two consecutive general queries sent by the system on this SDP. The value of this object is only meaningful when the value of sdpBndIgmpSnpgCfgSendQueries is 'enabled(1)'.
TPO sdpBndIgmpSnpgCfgImportPlcy	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.1	TPolicyStatementNameOrEmpty	read-write	The value of the object sdpBndIgmpSnpgCfgImportPlcy specifies a policy statement that must be applied to all incoming IGMP messages on this SDP Bind.
TIM sdpBndIgmpSnpgCfgLastChangeTime	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.19	TimeStamp	read-only	The value of the object sdpBndIgmpSnpgCfgLastChangeTime indicates the sysUpTime at the time of the last modification of this entry.
U32 sdpBndIgmpSnpgCfgLastMembIntvl	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.8	Unsigned32	read-write	The value of the object sdpBndIgmpSnpgCfgLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.
INT sdpBndIgmpSnpgCfgMaxNbrGrps	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.9	INTEGER	read-write	The value of the object sdpBndIgmpSnpgCfgMaxNbrGrps specifies how many group addresses are allowed for this SDP bind. The value 0 means that no limit is imposed.
U32 sdpBndIgmpSnpgCfgMaxNbrSrcs	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.20	Unsigned32	read-write	The value of the object sdpBndIgmpSnpgCfgMaxNbrSrcs specifies how many source addresses are allowed per group address for this SDP bind. The value 0 means that no limit is imposed.
U32 sdpBndIgmpSnpgCfgMcacAvailMndBw	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.16	Unsigned32	read-only	The value of sdpBndIgmpSnpgCfgMcacAvailMndBw indicates the pre-reserved bandwidth in kilo-bits per second(kbps) for the mandatory channels for this interface instance.
U32 sdpBndIgmpSnpgCfgMcacAvailOplBw	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.17	Unsigned32	read-only	The value of sdpBndIgmpSnpgCfgMcacAvailOplBw indicates the available bandwidth in kilo-bits per second(kbps) for this interface instance.
U32 sdpBndIgmpSnpgCfgMcacinUseMndBw	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.14	Unsigned32	read-only	The value of sdpBndIgmpSnpgCfgMcacinUseMndBw indicates the in-use bandwidth in kilo-bits per second(kbps) for the mandatory channels for this protocol interface instance.
U32 sdpBndIgmpSnpgCfgMcacinUseOplBw	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.15	Unsigned32	read-only	The value of sdpBndIgmpSnpgCfgMcacinUseOplBw indicates the in-use bandwidth in kilo-bits per second(kbps) for the optional channels for this protocol interface instance.
TPO sdpBndIgmpSnpgCfgMcacPolicyName	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.11	TPolicyStatementNameOrEmpty	read-write	The value of sdpBndIgmpSnpgCfgMcacPolicyName indicates the name of the multicast CAC policy.
I32 sdpBndIgmpSnpgCfgMcacPrRsvMndBW	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.13	Integer32	read-write	The value of sdpBndIgmpSnpgCfgMcacPrRsvMndBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilo-bits per second(kbps). If the value of sdpBndIgmpSnpgCfgMcacUnconstBW is '0', no mandatory channels are allowed. If the value of sdpBndIgmpSnpgCfgMcacUnconstBW is '-1', then all mandatory and optional channels are allowed. If the value of sdpBndIgmpSnpgCfgMcacPrRsvMndBW is equal to the value of sdpBndIgmpSnpgCfgMcacUnconstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of sdpBndIgmpSnpgCfgMcacPrRsvMndBW should always be less than or equal to that of sdpBndIgmpSnpgCfgMcacUnconstBW. An attempt to set the value of sdpBndIgmpSnpgCfgMcacPrRsvMndBW greater than that of sdpBndIgmpSnpgCfgMcacUnconstBW will result in inconsistent value error.
I32 sdpBndIgmpSnpgCfgMcacUnconstBW	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.12	Integer32	read-write	The value of sdpBndIgmpSnpgCfgMcacUnconstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilo-bits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of sdpBndIgmpSnpgCfgMcacUnconstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface.
T/F sdpBndIgmpSnpgCfgMcacValInTrans	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.18	TruthValue	read-only	The value of sdpBndIgmpSnpgCfgMcacValInTrans indicates that the operational (available and in-use mandatory/optional) value for the following objects are in transition due to configuration change: sdpBndIgmpSnpgCfgMcacinUseMndBw sdpBndIgmpSnpgCfgMcacinUseOplBw sdpBndIgmpSnpgCfgMcacAvailMndBw sdpBndIgmpSnpgCfgMcacAvailOplBw When multicast CAC Policy is applied on the interface for the join of the next channel, the operational values will be recalculated and applied to the above objects and the value for sdpBndIgmpSnpgCfgMcacValInTrans will be set to 'false(2)'. If the value of sdpBndIgmpSnpgCfgMcacValInTrans is 'true(1)' then the values are in transition.
T/F sdpBndIgmpSnpgCfgMRouter	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.3	TruthValue	read-write	The value of the object sdpBndIgmpSnpgCfgMRouter specifies whether whether a multicast router is attached behind this SDP. If sdpBndIgmpSnpgCfgSendQueries is set to 'enabled(1)', the system acts as if this object was set to 'false(2)'.
U32 sdpBndIgmpSnpgCfgQueryRespIntvl	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.6	Unsigned32	read-write	The value of the object sdpBndIgmpSnpgCfgQueryRespIntvl specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of sdpBndIgmpSnpgCfgSendQueries is 'enabled(1)'.
U32 sdpBndIgmpSnpgCfgRobustCount	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.7	Unsigned32	read-write	The value of the object sdpBndIgmpSnpgCfgRobustCount specifies the value of the Robust count. This object allows tuning for the expected packet loss on this SDP. If a SDP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of sdpBndIgmpSnpgCfgSendQueries is 'enabled(1)'.
ALX sdpBndIgmpSnpgCfgSendQueries	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.4	AlxIgmpSnpgAdminState	read-write	The value of the object sdpBndIgmpSnpgCfgSendQueries specifies whether the system generates General Queries by itself on this SDP.
TMN sdpBndIgmpSnpgCfgVersion	1.3.6.1.4.1.6527.3.3.2.2.3.1.1.10	TmnxIgmpVersion	read-write	The value of the object sdpBndIgmpSnpgCfgVersion specifies the version of IGMP running on this SDP bind.
C32 sdpBndIgmpSnpgFwdGenQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.16	Counter32	read-only	The value of the object sdpBndIgmpSnpgFwdGenQueries indicates the number of IGMP General Queries forwarded on this SDP Bind.
C32 sdpBndIgmpSnpgFwdGrpSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.17	Counter32	read-only	The value of the object sdpBndIgmpSnpgFwdGrpSpecQueries indicates the number of IGMP Group-Specific Queries forwarded on this SDP Bind.
C32 sdpBndIgmpSnpgFwdSrcSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.18	Counter32	read-only	The value of the object sdpBndIgmpSnpgFwdSrcSpecQueries indicates the number of IGMP Group-And-Source-Specific Queries forwarded on this SDP Bind.
C32 sdpBndIgmpSnpgFwdUnknownType	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.23	Counter32	read-only	The value of the object sdpBndIgmpSnpgFwdUnknownType indicates the number of IGMP unknown type packets forwarded on this SDP Bind.
C32 sdpBndIgmpSnpgFwdV1Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.19	Counter32	read-only	The value of the object sdpBndIgmpSnpgFwdV1Reports indicates the number of IGMPv1 Reports forwarded on this SDP Bind.
C32 sdpBndIgmpSnpgFwdV2Leaves	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.22	Counter32	read-only	The value of the object sdpBndIgmpSnpgFwdV2Leaves indicates the number of IGMPv2 Leaves forwarded on this SDP Bind.
C32 sdpBndIgmpSnpgFwdV2Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.20	Counter32	read-only	The value of the object sdpBndIgmpSnpgFwdV2Reports indicates the number of IGMPv2 Reports forwarded on this SDP Bind.
C32 sdpBndIgmpSnpgFwdV3Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.21	Counter32	read-only	The value of the object sdpBndIgmpSnpgFwdV3Reports indicates the number of IGMPv3 Reports forwarded on this SDP Bind.
IP sdpBndIgmpSnpgGrpAddress	1.3.6.1.4.1.6527.3.3.2.2.3.2.1.1	IpAddress	not-accessible	The value of the object sdpBndIgmpSnpgGrpAddress indicates the IPv4 multicast group address for which this entry contains information.
U32 sdpBndIgmpSnpgGrpCompatMode	1.3.6.1.4.1.6527.3.3.2.2.3.2.1.6	Unsigned32	read-only	The value of the object sdpBndIgmpSnpgGrpCompatMode indicates the IGMP version applicable on this SDP Bind for this multicast group address. This corresponds to the lowest version seen for this group address on this SDP Bind.
U32 sdpBndIgmpSnpgGrpExpiryTime	1.3.6.1.4.1.6527.3.3.2.2.3.2.1.5	Unsigned32	read-only	The value of the object sdpBndIgmpSnpgGrpExpiryTime indicates the amount of time remaining before this entry will be aged out.
TMN sdpBndIgmpSnpgGrpFilterMode	1.3.6.1.4.1.6527.3.3.2.2.3.2.1.3	TmnxIgmpGroupFilterMode	read-only	The value of the object sdpBndIgmpSnpgGrpFilterMode indicates the filter-mode for this group.
NTF sdpBndIgmpSnpgGrpLimitExceeded	1.3.6.1.4.1.6527.3.3.3.2.2.0.1			The sdpBndIgmpSnpgGrpLimitExceeded notification is generated when an IGMP group is dropped on a given SDP bind because a user configurable upper limit given by sdpBndIgmpSnpgCfgMaxNbrGrps is reached.
IP sdpBndIgmpSnpgGrpSrcAddr	1.3.6.1.4.1.6527.3.3.2.2.3.3.1.1	IpAddress	not-accessible	The value of the object sdpBndIgmpSnpgGrpSrcAddr indicates the address of the Source sending multicast traffic to the group identified by sdpBndIgmpSnpgGrpAddress. If the value of sdpBndIgmpSnpgGrpFilterMode corresponding to this entry is 'include(1)', the receivers are interested in receiving traffic from this Source. If the value of sdpBndIgmpSnpgGrpFilterMode corresponding to this entry is 'exclude(2)', the receivers are not interested in receiving traffic from this Source.
U32 sdpBndIgmpSnpgGrpSrcExpiryTime	1.3.6.1.4.1.6527.3.3.2.2.3.3.1.4	Unsigned32	read-only	The value of the object sdpBndIgmpSnpgGrpSrcExpiryTime indicates the minimum amount of time remaining before this entry will be aged out. If the value of sdpBndIgmpSnpgGrpSrcExpiryTime is non-zero and the value of sdpBndIgmpSnpgGrpFilterMode corresponding to this entry is 'include(1)', it means that there are currently one or more systems which desire to receive multicast traffic for this Source. If this timer expires and the value of sdpBndIgmpSnpgGrpFilterMode is 'include(1)', the system concludes that traffic from this particular Source is no longer desired on the attached network, and deletes this entry. If the value of sdpBndIgmpSnpgGrpSrcExpiryTime is non-zero and the filter-mode for the group is 'exclude(2)', it means that at least one system desires to receive multicast traffic from this Source. If the value of sdpBndIgmpSnpgGrpSrcExpiryTime is zero and the filter-mode for the group is 'exclude(2)', it means that no system desires to receive multicast traffic from this Source.
TMN sdpBndIgmpSnpgGrpSrcType	1.3.6.1.4.1.6527.3.3.2.2.3.3.1.2	TmnxIgmpGroupType	read-only	The value of the object sdpBndIgmpSnpgGrpSrcType indicates how this source entry was learned. If this source entry was learned, it is set to 'dynamic(2)'. For statically configured sources, the value is set to 'static(1)'.
TIK sdpBndIgmpSnpgGrpSrcUpTime	1.3.6.1.4.1.6527.3.3.2.2.3.3.1.3	TimeTicks	read-only	The value of the object sdpBndIgmpSnpgGrpSrcUpTime indicates how long (in hundredths of a second) that the Source address already exists in the database for this SDP Bind.
TMN sdpBndIgmpSnpgGrpType	1.3.6.1.4.1.6527.3.3.2.2.3.2.1.2	TmnxIgmpGroupType	read-only	The value of the object sdpBndIgmpSnpgGrpType indicates whether this entry was learned dynamically or was statically configured.
TIK sdpBndIgmpSnpgGrpUpTime	1.3.6.1.4.1.6527.3.3.2.2.3.2.1.4	TimeTicks	read-only	The value of the object sdpBndIgmpSnpgGrpUpTime indicates how long (in hundredths of a second) that the group address already exists in the database for this SDP Bind.
U32 sdpBndIgmpSnpgGrpV1HostExpTime	1.3.6.1.4.1.6527.3.3.2.2.3.2.1.7	Unsigned32	read-only	The value of the object sdpBndIgmpSnpgGrpV1HostExpTime indicates the time remaining until the system will assume that there are no longer any IGMPv1 members on this SDP Bind. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership interval. While this time remaining is non-zero, the system ignores any IGMPv2 and IGMPv3 'leave' messages for this group that it receives on this SDP Bind.
U32 sdpBndIgmpSnpgGrpV2HostExpTime	1.3.6.1.4.1.6527.3.3.2.2.3.2.1.8	Unsigned32	read-only	The value of the object sdpBndIgmpSnpgGrpV2HostExpTime indicates the time remaining until the system will assume that there are no longer any IGMPv2 members on the SDP Bind. Upon hearing any IGMPv2 Membership Report, this value is reset to the group membership interval. While this time remaining is non-zero, the system ignores any IGMPv3 'leave' messages for this group that it receives on this SDP Bind.
C32 sdpBndIgmpSnpgImportPolicyDrops	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.31	Counter32	read-only	The value of the object sdpBndIgmpSnpgImportPolicyDrops indicates the number of times an IGMP Group or Source is dropped because of applying an import policy on this SDP Bind.
C32 sdpBndIgmpSnpgMaxNumGroupsDrops	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.32	Counter32	read-only	The value of the object sdpBndIgmpSnpgMaxNumGroupsDrops indicates the number of times an IGMP Group is dropped because of exceeding the configured maximum number of groups on this SDP Bind.
C32 sdpBndIgmpSnpgMaxNumSourcesDrops	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.37	Counter32	read-only	The value of the object sdpBndIgmpSnpgMaxNumSourcesDrops indicates the number of times an IGMP Source is dropped because of exceeding the configured maximum number of sources per group on this SDP Bind.
NTF sdpBndIgmpSnpgMcacPlcyDropped	1.3.6.1.4.1.6527.3.3.3.2.2.0.2			The sdpBndIgmpSnpgMcacPlcyDropped notification is generated when an IGMP group is dropped on a given SDP bind because of applying a multicast CAC policy given by sdpBndIgmpSnpgCfgMcacPolicyName.
C32 sdpBndIgmpSnpgMcacPolicyDrops	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.34	Counter32	read-only	The value of the object sdpBndIgmpSnpgMcacPolicyDrops indicates the number of times an IGMP Group is dropped because of applying a multicast CAC policy on this SDP Bind.
C32 sdpBndIgmpSnpgRxBadEncodedPkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.27	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxBadEncodedPkts indicates the number of IGMP packets dropped on this SDP Bind because of a bad encoding.
C32 sdpBndIgmpSnpgRxBadIgmpChksmPkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.26	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxBadIgmpChksmPkts indicates the number of dropped IGMP packets on this SDP Bind because of a bad IGMP header checksum.
C32 sdpBndIgmpSnpgRxBadIpChksmPkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.25	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxBadIpChksmPkts indicates the number of dropped IGMP packets on this SDP Bind because of a bad IPv4 header checksum.
C32 sdpBndIgmpSnpgRxBadLenPkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.24	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxBadLenPkts indicates the number of IGMP packets dropped on this SDP Bind because of a bad length.
C32 sdpBndIgmpSnpgRxGenQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.8	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxGenQueries indicates the number of IGMP General Queries received on this SDP Bind.
C32 sdpBndIgmpSnpgRxGrpSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.9	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxGrpSpecQueries indicates the number of IGMP Group-Specific Queries received on this SDP Bind.
C32 sdpBndIgmpSnpgRxLocalScopePkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.35	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxLocalScopePkts indicates the number of IGMP packets received on the link-local scope IPv6 multicast address.
C32 sdpBndIgmpSnpgRxNoRtrAlertPkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.28	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxNoRtrAlertPkts indicates the number of IGMP packets dropped on this SDP Bind because the Router Alert Option in the IP packet is not set.
C32 sdpBndIgmpSnpgRxRsvdScopePkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.36	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxRsvdScopePkts indicates the number of IGMP packets received on the reserved scope IPv6 multicast address.
C32 sdpBndIgmpSnpgRxSrcSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.10	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxSrcSpecQueries indicates the number of IGMP Group-And-Source-Specific Queries received on this SDP Bind.
C32 sdpBndIgmpSnpgRxUnknownType	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.15	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxUnknownType indicates the number of IGMP unknown type packets received on this SDP Bind.
C32 sdpBndIgmpSnpgRxV1Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.11	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxV1Reports indicates the number of IGMPv1 Reports received on this SDP Bind.
C32 sdpBndIgmpSnpgRxV2Leaves	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.14	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxV2Leaves indicates the number of IGMPv2 Leaves received on this SDP Bind.
C32 sdpBndIgmpSnpgRxV2Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.12	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxV2Reports indicates the number of IGMPv2 Reports received on this SDP Bind.
C32 sdpBndIgmpSnpgRxV3Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.13	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxV3Reports indicates the number of IGMPv3 Reports received on this SDP Bind.
C32 sdpBndIgmpSnpgRxWrongVersionPkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.33	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxWrongVersionPkts indicates the total number of IGMP packets with a wrong version received on this SDP Bind.
C32 sdpBndIgmpSnpgRxZeroSrcAdrPkts	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.29	Counter32	read-only	The value of the object sdpBndIgmpSnpgRxZeroSrcAdrPkts indicates the number of IGMP packets dropped on this SDP Bind because they contain a zero source IPv4 address.
C32 sdpBndIgmpSnpgSendQueryCfgDrops	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.30	Counter32	read-only	The value of the object sdpBndIgmpSnpgSendQueryCfgDrops indicates the number of times an IGMP Query is dropped because the object sdpBndIgmpSnpgCfgSendQueries for this SDP Bind is set to 'enabled(1)'.
NTF sdpBndIgmpSnpgSrcLimitExceeded	1.3.6.1.4.1.6527.3.3.3.2.2.0.3			The sdpBndIgmpSnpgSrcLimitExceeded notification is generated when an IGMP source is dropped on a given SDP Bind because a user configurable upper limit given by sdpBndIgmpSnpgCfgMaxNbrSrcs is reached.
IP sdpBndIgmpSnpgStaticGroupAddr	1.3.6.1.4.1.6527.3.3.2.2.3.4.1.1	IpAddress	not-accessible	The value of the object sdpBndIgmpSnpgStaticGroupAddr specifies the group multicast address for this statically configured (S,G) entry for this SDP Bind.
TIM sdpBndIgmpSnpgStaticLastChange	1.3.6.1.4.1.6527.3.3.2.2.3.4.1.4	TimeStamp	read-only	The value of the object sdpBndIgmpSnpgStaticLastChange indicates the sysUpTime at the time of the last modification of this entry.
ROW sdpBndIgmpSnpgStaticRowstatus	1.3.6.1.4.1.6527.3.3.2.2.3.4.1.3	RowStatus	read-create	The value of the object sdpBndIgmpSnpgStaticRowstatus specifies the row status used for creation or deletion of sdpBindIgmpSnpgStaticGrpSrcTable entries.
IP sdpBndIgmpSnpgStaticSourceAddr	1.3.6.1.4.1.6527.3.3.2.2.3.4.1.2	IpAddress	not-accessible	The value of the object sdpBndIgmpSnpgStaticSourceAddr specifies the Source IP address for this statically configured (S,G) entry for this SDP Bind. For a (*,G) entry this object must be set to 0.0.0.0.
C32 sdpBndIgmpSnpgTxGenQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.1	Counter32	read-only	The value of the object sdpBndIgmpSnpgTxGenQueries indicates the number of IGMP General Queries transmitted on this SDP Bind.
C32 sdpBndIgmpSnpgTxGrpSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.2	Counter32	read-only	The value of the object sdpBndIgmpSnpgTxGrpSpecQueries indicates the number of IGMP Group-Specific Queries transmitted on this SDP Bind.
C32 sdpBndIgmpSnpgTxSrcSpecQueries	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.3	Counter32	read-only	The value of the object sdpBndIgmpSnpgTxSrcSpecQueries indicates the number of IGMP Group-And-Source-Specific Queries transmitted on this SDP Bind.
C32 sdpBndIgmpSnpgTxV1Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.4	Counter32	read-only	The value of the object sdpBndIgmpSnpgTxV1Reports indicates the number of IGMPv1 Reports transmitted on this SDP Bind.
C32 sdpBndIgmpSnpgTxV2Leaves	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.7	Counter32	read-only	The value of the object sdpBndIgmpSnpgTxV2Leaves indicates the number of IGMPv2 Leaves transmitted on this SDP Bind.
C32 sdpBndIgmpSnpgTxV2Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.5	Counter32	read-only	The value of the object sdpBndIgmpSnpgTxV2Reports indicates the number of IGMPv2 Reports transmitted on this SDP Bind.
C32 sdpBndIgmpSnpgTxV3Reports	1.3.6.1.4.1.6527.3.3.2.2.3.5.1.6	Counter32	read-only	The value of the object sdpBndIgmpSnpgTxV3Reports indicates the number of IGMPv3 Reports transmitted on this SDP Bind.
ALX tlsIgmpSnpgCfgAdminState	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.1	AlxIgmpSnpgAdminState	read-write	The value of the object tlsIgmpSnpgCfgAdminState specifies the administrative state of the IGMP snooping feature associated with this Tls.
U32 tlsIgmpSnpgCfgGenQueryIntvl	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.2	Unsigned32	read-write	The value of the object tlsIgmpSnpgCfgGenQueryIntvl specifies the Queriers Query Interval, on networks where the active Querier is not running IGMPv3 (meaning that the Query Interval is not sent in the Query PDU). For these networks, this object needs to be set to the same value as what is configured on the Querier.
TIM tlsIgmpSnpgCfgLastChangeTime	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.10	TimeStamp	read-only	The value of the object tlsIgmpSnpgCfgLastChangeTime indicates the sysUpTime at the time of the last modification of this entry.
ALX tlsIgmpSnpgCfgMvrAdminState	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.5	AlxIgmpSnpgAdminState	read-write	The value of the object tlsIgmpSnpgCfgMvrAdminState specifies the administrative state of the IGMP snooping Multicast VPLS Registration feature associated with this Tls.
TIT tlsIgmpSnpgCfgMvrDescription	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.6	TItemDescription	read-write	The value of the object tlsIgmpSnpgCfgMvrDescription specifies a user provided description for the IGMP snooping Multicast VPLS Registration configuration associated with this Tls.
TPO tlsIgmpSnpgCfgMvrPolicy	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.7	TPolicyStatementNameOrEmpty	read-write	The value of the object tlsIgmpSnpgCfgMvrPolicy specifies the policy statement that is applied to decide whether or not a multicast group learned on a SAP with the object sapIgmpSnpgCfgMvrFromVplsId set to this Tls can be joined to this Tls. If an empty string is provided, all groups learned on these SAPs are joined without applying a policy.
IP tlsIgmpSnpgCfgQuerySrcAddress	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.8	IpAddress	read-write	The value of the object tlsIgmpSnpgCfgQuerySrcAddress specifies, together with the value of object tlsIgmpSnpgCfgQuerySrcAddrType, the source IP address used when generating IGMP queries. The value of this object is only used when the value of tlsIgmpSnpgCfgQuerySrcAddrType is 'querySrcAddr (1)'.
INT tlsIgmpSnpgCfgQuerySrcAddrType	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.9	INTEGER	read-write	The value of the object tlsIgmpSnpgCfgQuerySrcAddrType specifies, together with the value of object tlsIgmpSnpgCfgQuerySrcAddress, the source IP address used when generating IGMP queries. When the value of this object is 'querySrcAddr (1)', the value configured in tlsIgmpSnpgCfgQuerySrcAddress is used as the query source address. When the value of this object is 'systemIpAddr (2)', the IP address of the system interface is used.
IP tlsIgmpSnpgCfgReportSrcAddress	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.4	IpAddress	read-write	The value of the object tlsIgmpSnpgCfgReportSrcAddress specifies the source IP address used when generating IGMP reports. Although a zero source address is allowed according to the IGMPv3 spec, some routers seem to drop these zero-source reports.
U32 tlsIgmpSnpgCfgRobustCount	1.3.6.1.4.1.6527.3.3.2.2.1.1.1.3	Unsigned32	read-write	The value of the object tlsIgmpSnpgCfgRobustCount specifies the Querier's Robustness Variable, on networks where the active Querier is not running IGMPv3 (meaning that the Robustness Variable is not sent in the Query PDU). For these networks, this object needs to be set to the same value as what is configured on the Querier.
tlsIgmpSnpgConfigEntry	1.3.6.1.4.1.6527.3.3.2.2.1.1.1		not-accessible	Each row represents an instance of IGMP snooping running within a Tls service. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon creation of a new Tls service (svcTlsInfoTable). The entry is destroyed when the Tls service is removed.
tlsIgmpSnpgConfigTable	1.3.6.1.4.1.6527.3.3.2.2.1.1		not-accessible	The table tlsIgmpSnpgConfigTable contains objects to configure the IGMP snooping feature within a Tls service.
TIM tlsIgmpSnpgConfigTableLastChange	1.3.6.1.4.1.6527.3.3.2.2.5.1	TimeStamp	read-only	The value of the object tlsIgmpSnpgConfigTableLastChange indicates the value of sysUpTime at the time of the last modification of an entry in the tlsIgmpSnpgConfigTable.
IP tlsIgmpSnpgMRouterAddress	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.1	IpAddress	read-only	The value of the object tlsIgmpSnpgMRouterAddress indicates the source IP address used by IGMP queries sent out by this multicast router.
TMN tlsIgmpSnpgMRouterEncapValue	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.4	TmnxEncapVal	read-only	The value of the object tlsIgmpSnpgMRouterEncapValue indicates, together with the object tlsIgmpSnpgMRouterPortId, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgMRouterLocale is 'sap(1)'.
tlsIgmpSnpgMRouterEntry	1.3.6.1.4.1.6527.3.3.2.2.1.5.1		not-accessible	Each row contains information about one specific multicast router known within a Tls service. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon detection of a multicast router in a Tls service for which IGMP snooping is enabled (via tlsIgmpSnpgCfgAdminState).
U32 tlsIgmpSnpgMRouterExpiryTime	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.8	Unsigned32	read-only	The value of the object tlsIgmpSnpgMRouterExpiryTime indicates the time in seconds after which this multicast router is no longer known in this Tls.
U32 tlsIgmpSnpgMRouterGenQueryIntvl	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.10	Unsigned32	read-only	The value of the obejct tlsIgmpSnpgMRouterGenQueryIntvl indicates the General Query Interval used by this multicast router in case of IGMPv3. For an IGMPv1 or IGMPv2 multicast router this value is a copy of tlsIgmpSnpgCfgGenQueryIntvl.
U32 tlsIgmpSnpgMRouterGenRespIntvl	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.11	Unsigned32	read-only	The value of the object tlsIgmpSnpgMRouterGenRespIntvl indicates the General Query Response interval (in 1/10 seconds) used by this multicast router in case of IGMPv3.
ALX tlsIgmpSnpgMRouterLocale	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.2	AlxIgmpSnpgLocation	read-only	The value of the object tlsIgmpSnpgMRouterLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP has the value 'sdp(2)'.
TMN tlsIgmpSnpgMRouterPortId	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.3	TmnxPortID	read-only	The value of the object tlsIgmpSnpgMRouterPortId indicates, together with the object tlsIgmpSnpgMRouterEncapValue, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgMRouterLocale is 'sap(1)'.
U32 tlsIgmpSnpgMRouterRobustCount	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.12	Unsigned32	read-only	The value of the object tlsIgmpSnpgMRouterRobustCount indicates the Robust Count value used by this multicast router in case of IGMPv3. For an IGMPv1 or IGMPv2 multicast router this value is a copy of tlsIgmpSnpgCfgRobustCount.
SDP tlsIgmpSnpgMRouterSdpId	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.5	SdpId	read-only	The value of the object tlsIgmpSnpgMRouterSdpId indicates, together with the object tlsIgmpSnpgMRouterVcId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgMRouterLocale is 'sdp(2)'.
tlsIgmpSnpgMRouterTable	1.3.6.1.4.1.6527.3.3.2.2.1.5		not-accessible	The table tlsIgmpSnpgMRouterTable contains information related to the multicast routers found in each Tls Service.
TIK tlsIgmpSnpgMRouterUpTime	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.9	TimeTicks	read-only	The value of the object tlsIgmpSnpgMRouterUpTime indicates how long (in hundredths of a second) that this multicast router has been known in this Tls.
TMN tlsIgmpSnpgMRouterVcId	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.6	TmnxVcIdOrNone	read-only	The value of the object tlsIgmpSnpgMRouterVcId indicates, together with the object tlsIgmpSnpgMRouterSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgMRouterLocale is 'sdp(2)'.
TMN tlsIgmpSnpgMRouterVersion	1.3.6.1.4.1.6527.3.3.2.2.1.5.1.7	TmnxIgmpVersion	read-only	The value of the object tlsIgmpSnpgMRouterVersion indicates the version of the IGMP protocol used by this multicast router.
IP tlsIgmpSnpgProxyGroupAddress	1.3.6.1.4.1.6527.3.3.2.2.1.3.1.1	IpAddress	not-accessible	The value of the object tlsIgmpSnpgProxyGroupAddress indicates the IP multicast group address for which this entry contains information.
tlsIgmpSnpgProxyGroupEntry	1.3.6.1.4.1.6527.3.3.2.2.1.3.1		not-accessible	Each entry in this table contains information about a multicast group address known in this Tls. If a group source list is present it is described in the corresponding entries of the tlsIgmpSnpgProxyGrpSrcTable table.
TMN tlsIgmpSnpgProxyGroupFilterMode	1.3.6.1.4.1.6527.3.3.2.2.1.3.1.2	TmnxIgmpGroupFilterMode	read-only	The value of the object tlsIgmpSnpgProxyGroupFilterMode indicates the filter-mode for this group.
tlsIgmpSnpgProxyGroupTable	1.3.6.1.4.1.6527.3.3.2.2.1.3		not-accessible	The table tlsIgmpSnpgProxyGroupTable together with the table tlsIgmpSnpgProxyGrpSrcTable contains multicast group address information collected by IGMP snooping for this Tls. The content of this table is used by the system to 'proxy-report' towards the IGMP Querier.
TIK tlsIgmpSnpgProxyGroupUpTime	1.3.6.1.4.1.6527.3.3.2.2.1.3.1.3	TimeTicks	read-only	The value of the object tlsIgmpSnpgProxyGroupUpTime indicates how long (in hundredths of a second) that the group address already exists in the database.
IP tlsIgmpSnpgProxyGrpSrcAddr	1.3.6.1.4.1.6527.3.3.2.2.1.4.1.1	IpAddress	not-accessible	The value of the object tlsIgmpSnpgProxyGrpSrcAddr indicates the IPv4 multicast Source address.
tlsIgmpSnpgProxyGrpSrcEntry	1.3.6.1.4.1.6527.3.3.2.2.1.4.1		not-accessible	tlsIgmpSnpgProxyGrpSrcEntry describes an entry in the tlsIgmpSnpgProxyGrpSrcTable. Each entry represents an IPv4 multicast Source for which the system is interested/not interested in receiving multicast traffic from.
tlsIgmpSnpgProxyGrpSrcTable	1.3.6.1.4.1.6527.3.3.2.2.1.4		not-accessible	The table tlsIgmpSnpgProxyGrpSrcTable lists the IPv4 multicast Sources corresponding to the IPv4 multicast groups listed in the tlsIgmpSnpgProxyGroupTable.
TIK tlsIgmpSnpgProxyGrpSrcUpTime	1.3.6.1.4.1.6527.3.3.2.2.1.4.1.2	TimeTicks	read-only	The value of the object tlsIgmpSnpgProxyGrpSrcUpTime indicates how long (in hundredths of a second) that the Source address already exists in the database.
IP tlsIgmpSnpgQuerierAddress	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.2	IpAddress	read-only	The value of the object tlsIgmpSnpgQuerierAddress indicates the source IP address used by IGMP queries sent out by the active Querier.
TMN tlsIgmpSnpgQuerierEncapValue	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.5	TmnxEncapVal	read-only	The value of the object tlsIgmpSnpgQuerierEncapValue indicates, together with the object tlsIgmpSnpgQuerierPortId, the SAP on which the active Querier is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgQuerierLocale is 'sap(1)'.
tlsIgmpSnpgQuerierEntry	1.3.6.1.4.1.6527.3.3.2.2.1.2.1		not-accessible	Each row represents information on the active IGMP Querier within a Tls service. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon detection of an IGMP Querier in a Tls service for which IGMP snooping is enabled (via tlsIgmpSnpgCfgAdminState).
U32 tlsIgmpSnpgQuerierExpiryTime	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.9	Unsigned32	read-only	The value of the object tlsIgmpSnpgQuerierExpiryTime indicates the time in seconds after which this Querier is no longer known as the current active IGMP Querier.
U32 tlsIgmpSnpgQuerierGenQueryIntvl	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.10	Unsigned32	read-only	The value of the object tlsIgmpSnpgQuerierGenQueryIntvl indicates the General Query Interval used by the active IGMPv3 Querier. For an IGMPv1 or IGMPv2 Querier this value is a copy of tlsIgmpSnpgCfgGenQueryIntvl.
U32 tlsIgmpSnpgQuerierGenRespIntvl	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.11	Unsigned32	read-only	The value of the object tlsIgmpSnpgQuerierGenRespIntvl indicates the General Query Response interval (in 1/10 seconds) used by the active IGMPv3 Querier.
ALX tlsIgmpSnpgQuerierLocale	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.3	AlxIgmpSnpgLocation	read-only	The value of the object tlsIgmpSnpgQuerierLocale indicates where the Querier was detected. An IGMP Querier found on a local SAP has the value 'sap(1)'. An IGMP Querier detected on an SDP has the value 'sdp(2)'.
TMN tlsIgmpSnpgQuerierPortId	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.4	TmnxPortID	read-only	The value of the object tlsIgmpSnpgQuerierPortId indicates, together with the object tlsIgmpSnpgQuerierEncapValue, the SAP on which the active Querier is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgQuerierLocale is 'sap(1)'.
U32 tlsIgmpSnpgQuerierRobustCount	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.12	Unsigned32	read-only	The value of the object tlsIgmpSnpgQuerierRobustCount indicates the Robust Count value used by the active IGMPv3 Querier. For an IGMPv1 or IGMPv2 Querier this value is a copy of tlsIgmpSnpgCfgRobustCount.
SDP tlsIgmpSnpgQuerierSdpId	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.6	SdpId	read-only	The value of the object tlsIgmpSnpgQuerierSdpId indicates, together with the object tlsIgmpSnpgQuerierVcId, the SDP Binding on which the active Querier is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgQuerierLocale is 'sdp(2)'.
tlsIgmpSnpgQuerierTable	1.3.6.1.4.1.6527.3.3.2.2.1.2		not-accessible	The table tlsIgmpSnpgQuerierTable contains information related to the active IGMP Querier found in each Tls Service.
TIK tlsIgmpSnpgQuerierUpTime	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.8	TimeTicks	read-only	The value of the object tlsIgmpSnpgQuerierUpTime indicates how long (in hundredths of a second) that this Querier has been known as the current active IGMP Querier.
TMN tlsIgmpSnpgQuerierVcId	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.7	TmnxVcIdOrNone	read-only	The value of the object tlsIgmpSnpgQuerierVcId indicates, together with the object tlsIgmpSnpgQuerierSdpId, the SDP Binding on which the active Querier is detected. The value of this object is only meaningful when the value of tlsIgmpSnpgQuerierLocale is 'sdp(2)'.
TMN tlsIgmpSnpgQuerierVersion	1.3.6.1.4.1.6527.3.3.2.2.1.2.1.1	TmnxIgmpVersion	read-only	The value of the object tlsIgmpSnpgQuerierVersion indicates the version of the IGMP protocol that is sent by the active IGMP Querier detected in this Tls.

RFC description

Alcatel-Lucent 7x50 IGMP snooping multicast protocol management and provisioning.

Start monitoring Alcatel-Lucent (Nokia) 7x50 service routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IGMP-SNOOPING-MIB