ADTRAN-AOS-VQM

All MIBs › ADTRAN-AOS-VQM

Organization: ADTRAN, Inc.

Last Updated: 2009-01-06

Category: Telephony and VoIP, Vendor: ADTRAN

Description: Manages Voice Quality Monitoring (VQM) metrics on ADTRAN AOS devices including MOS scores and jitter buffer statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ADTRAN-AOS-VQM?

ADTRAN-AOS-VQM is an ADTRAN proprietary MIB implementing VQM (Voice Quality Monitoring) on AOS (ADTRAN Operating System) platforms. Its objects cover an end-of-call trap and trap-state/severity-level/event-type configuration, global/SIP/UDP monitoring enable, international-code handling, jitter-buffer type and adaptive min/nominal/max or fixed nominal/size settings with early/late thresholds, round-trip-ping enable/type, call-history size, and history alert thresholds for listening/conversational/perceptual quality MOS (LQMOS/CQMOS/PQMOS), packet loss, out-of-order, and jitter. As a performance/notification MIB it lets an administrator get alerted when a completed VoIP call's quality metrics crossed a configured threshold. It is deployed on ADTRAN AOS platforms with VoIP/SIP trunking. Engineers can download the ADTRAN-AOS-VQM file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ADTRAN-AOS-VQM. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADTRAN AOS platforms (VoIP/SIP trunking)

Monitoring Examples

An administrator checks adVqmCfgHistoryThresholdLqmos to confirm the voice-quality alert threshold matches the organization's SLA before relying on VQM end-of-call traps for troubleshooting on an ADTRAN AOS router.

What Can Be Monitored

end-of-call voice-quality metrics and threshold alerts

Imported Objects

From ADTRAN-AOS

adGenAOSConformance	OBJECT-IDENTITY
adGenAOSVoice	OBJECT-IDENTITY

From ADTRAN-MIB

adIdentity

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
adGenAOSVqmCompliances	1.3.6.1.4.1.664.5.53.99.10.2
adGenAOSVqmConformance	1.3.6.1.4.1.664.5.53.99.10
adGenAOSVqmFullCompliance	1.3.6.1.4.1.664.5.53.99.10.2.1			The compliance statement for SNMP entities which implement version 1 of the adGenAosVQM MIB. When this MIB is implemented with support for read-only, then such an implementation can claim full compliance.
adGenAOSVqmGroups	1.3.6.1.4.1.664.5.53.99.10.1
adGenAOSVQMMib	1.3.6.1.4.1.664.6.10000.53.5.3			First Draft of ADTRAN-AOS-VQM MIB module.
adVQM	1.3.6.1.4.1.664.5.53.5.3
U32 adVqmActCallBitrate	1.3.6.1.4.1.664.5.53.5.3.8.1.1.102	Unsigned32	read-only	Actual bitrate of RTP stream, calculated using size of each RTP packet in bits and duration of audio represented in each packet, indication of required bandwidth.
C32 adVqmActCallBurstCount	1.3.6.1.4.1.664.5.53.5.3.8.1.1.55	Counter32	read-only	Number of times the stream was in a burst condition.
U32 adVqmActCallBurstLenAvgMsec	1.3.6.1.4.1.664.5.53.5.3.8.1.1.58	Unsigned32	read-only	Average burst length in miliseconds.
U32 adVqmActCallBurstLenAvgPkts	1.3.6.1.4.1.664.5.53.5.3.8.1.1.57	Unsigned32	read-only	Average burst length in packets.
PER adVqmActCallBurstRateAvg	1.3.6.1.4.1.664.5.53.5.3.8.1.1.56	Percentage	read-only	Total average percentage of frames lost or discarded while in burst condition.
U32 adVqmActCallBurstRLq	1.3.6.1.4.1.664.5.53.5.3.8.1.1.54	Unsigned32	read-only	Average listening quality R factor during burst condition.
U32 adVqmActCallCallDurationMs	1.3.6.1.4.1.664.5.53.5.3.8.1.1.16	Unsigned32	read-only	Elapsed time from start to last RTP packet on this stream.
STR adVqmActCallCallid	1.3.6.1.4.1.664.5.53.5.3.8.1.1.9	DisplayString	read-only	SIP call-ID from monitored SIP call signaling.
STR adVqmActCallCallStart	1.3.6.1.4.1.664.5.53.5.3.8.1.1.15	DisplayString	read-only	Time at which monitoring began on this RTP stream.
U32 adVqmActCallCcmid	1.3.6.1.4.1.664.5.53.5.3.8.1.1.10	Unsigned32	read-only	Internal generated call-ID.
INT adVqmActCallCodec	1.3.6.1.4.1.664.5.53.5.3.8.1.1.17	INTEGER	read-only	Last voice CODEC detected on this stream.
INT adVqmActCallCodecClass	1.3.6.1.4.1.664.5.53.5.3.8.1.1.18	INTEGER	read-only	Class to which CODEC vocoder belongs.
PER adVqmActCallDegDelay	1.3.6.1.4.1.664.5.53.5.3.8.1.1.50	Percentage	read-only	Percentage quality degradation due to delay.
PER adVqmActCallDegDiscard	1.3.6.1.4.1.664.5.53.5.3.8.1.1.47	Percentage	read-only	Percentage quality degradation due to packet discard.
PER adVqmActCallDegEcholvl	1.3.6.1.4.1.664.5.53.5.3.8.1.1.53	Percentage	read-only	Percentage quality degradation due to high echo levels.
PER adVqmActCallDegLoss	1.3.6.1.4.1.664.5.53.5.3.8.1.1.46	Percentage	read-only	Percentage quality degradation due to packet loss.
PER adVqmActCallDegNoiselvl	1.3.6.1.4.1.664.5.53.5.3.8.1.1.52	Percentage	read-only	Percentage quality degradation due to high noise levels.
PER adVqmActCallDegRecency	1.3.6.1.4.1.664.5.53.5.3.8.1.1.49	Percentage	read-only	Percentage quality degradation due to loss or discard recency in call.
PER adVqmActCallDegSiglvl	1.3.6.1.4.1.664.5.53.5.3.8.1.1.51	Percentage	read-only	Percentage quality degradation due to low speech energy signal level.
PER adVqmActCallDegVocoder	1.3.6.1.4.1.664.5.53.5.3.8.1.1.48	Percentage	read-only	Percentage quality degradation due to voice CODEC selection.
U32 adVqmActCallDelayAvgMsec	1.3.6.1.4.1.664.5.53.5.3.8.1.1.93	Unsigned32	read-only	Simulated jitter buffer delay average value.
U32 adVqmActCallDelayCurrentMsec	1.3.6.1.4.1.664.5.53.5.3.8.1.1.95	Unsigned32	read-only	Simulated jitter buffer delay current value.
C32 adVqmActCallDelayDecreaseCount	1.3.6.1.4.1.664.5.53.5.3.8.1.1.81	Counter32	read-only	Total number of SJB delay decreases (adaptive mode only).
C32 adVqmActCallDelayIncreaseCount	1.3.6.1.4.1.664.5.53.5.3.8.1.1.80	Counter32	read-only	Total number of SJB delay increases (adaptive mode only).
U32 adVqmActCallDelayMaxMsec	1.3.6.1.4.1.664.5.53.5.3.8.1.1.94	Unsigned32	read-only	Simulated jitter buffer delay maximum value.
U32 adVqmActCallDelayMinMsec	1.3.6.1.4.1.664.5.53.5.3.8.1.1.92	Unsigned32	read-only	Simulated jitter buffer delay minimum value.
STR adVqmActCallDestIntDescription	1.3.6.1.4.1.664.5.53.5.3.8.1.1.14	DisplayString	read-only	Destination interface description as defined in CLI or GUI.
STR adVqmActCallDestIntName	1.3.6.1.4.1.664.5.53.5.3.8.1.1.12	DisplayString	read-only	Destination interface name for RTP.
PER adVqmActCallDiscardRateAvg	1.3.6.1.4.1.664.5.53.5.3.8.1.1.66	Percentage	read-only	Total average percentage of frames discarded by SJB.
U32 adVqmActCallDscp	1.3.6.1.4.1.664.5.53.5.3.8.1.1.19	Unsigned32	read-only	Differentiated Services Code Point (DSCP) in RTP packet IP header.
C32 adVqmActCallDuplicatePkts	1.3.6.1.4.1.664.5.53.5.3.8.1.1.87	Counter32	read-only	Total number of duplicated packets discarded by SJB.
MSE adVqmActCallEarlyPeakJitterMs	1.3.6.1.4.1.664.5.53.5.3.8.1.1.79	MsecValue	read-only	Largest jitter encountered among packets counted as early.
C32 adVqmActCallEarlyPkts	1.3.6.1.4.1.664.5.53.5.3.8.1.1.88	Counter32	read-only	Total number of packets arriving early.
MSE adVqmActCallEarlyThreshMs	1.3.6.1.4.1.664.5.53.5.3.8.1.1.75	MsecValue	read-only	Early threshold for SJB, packets arriving under this threshold will not be discarded by SJB as early.
PER adVqmActCallEarlyThreshPc	1.3.6.1.4.1.664.5.53.5.3.8.1.1.76	Percentage	read-only	Percentage of total packets (including both early and late packets) not judged as being under the early jitter threshold.
C32 adVqmActCallEarlyTotalCount	1.3.6.1.4.1.664.5.53.5.3.8.1.1.78	Counter32	read-only	Total count of early packets arriving before the expected delay.
C32 adVqmActCallEarlyUnderThresh	1.3.6.1.4.1.664.5.53.5.3.8.1.1.77	Counter32	read-only	Count of early packets which arrived under the early jitter threshold.
U32 adVqmActCallExcessBurst	1.3.6.1.4.1.664.5.53.5.3.8.1.1.67	Unsigned32	read-only	Total length of speech lost during burst conditions not handled effectively by packet loss-concealment.
U32 adVqmActCallExcessGap	1.3.6.1.4.1.664.5.53.5.3.8.1.1.68	Unsigned32	read-only	Total length of speech lost during gap conditions not handled effectively by packet loss-concealment.
INT adVqmActCallExtRCqIn	1.3.6.1.4.1.664.5.53.5.3.8.1.1.98	INTEGER	read-only	External conversational quality R factor (in), from RTCP XR report (RFC3611).
INT adVqmActCallExtRCqOut	1.3.6.1.4.1.664.5.53.5.3.8.1.1.99	INTEGER	read-only	External conversational quality R factor (out), from RTCP XR report (RFC3611).
INT adVqmActCallExtRLqIn	1.3.6.1.4.1.664.5.53.5.3.8.1.1.96	INTEGER	read-only	External listening quality R factor (in), from RTCP XR report (RFC3611).
INT adVqmActCallExtRLqOut	1.3.6.1.4.1.664.5.53.5.3.8.1.1.97	INTEGER	read-only	External listening quality R factor (out), from RTCP XR report (RFC3611).
STR adVqmActCallFrom	1.3.6.1.4.1.664.5.53.5.3.8.1.1.7	DisplayString	read-only	From URI (originating caller) from monitored SIP call signaling.
C32 adVqmActCallGapCount	1.3.6.1.4.1.664.5.53.5.3.8.1.1.60	Counter32	read-only	Number of times the stream is in gap condition.
U32 adVqmActCallGapLenMsec	1.3.6.1.4.1.664.5.53.5.3.8.1.1.63	Unsigned32	read-only	Average gap length in milliseconds.
U32 adVqmActCallGapLenPkts	1.3.6.1.4.1.664.5.53.5.3.8.1.1.62	Unsigned32	read-only	Average gap length in packets.
PER adVqmActCallGapLossRateAvg	1.3.6.1.4.1.664.5.53.5.3.8.1.1.61	Percentage	read-only	Total average percentage of frames lost or discarded while in gap condition.
U32 adVqmActCallGapR	1.3.6.1.4.1.664.5.53.5.3.8.1.1.59	Unsigned32	read-only	Average listening quality R factor while stream is in a gap condition.
U32 adVqmActCallJbCfgMax	1.3.6.1.4.1.664.5.53.5.3.8.1.1.86	Unsigned32	read-only	Adaptive jitter buffer upper bound on delay applied to packets received, or fixed jitter buffer maximum number of packets that will be inserted in buffer.
U32 adVqmActCallJbCfgMin	1.3.6.1.4.1.664.5.53.5.3.8.1.1.84	Unsigned32	read-only	Adaptive jitter buffer minimum delay applied to packets received.
U32 adVqmActCallJbCfgNom	1.3.6.1.4.1.664.5.53.5.3.8.1.1.85	Unsigned32	read-only	Adaptive jitter buffer inital delay applied to packets received, or fixed jitter buffer delay applied to each packet.
INT adVqmActCallJitterBufferType	1.3.6.1.4.1.664.5.53.5.3.8.1.1.83	INTEGER	read-only	Configured SJB type either adaptive or fixed for this stream.
MSE adVqmActCallLatePeakJitterMs	1.3.6.1.4.1.664.5.53.5.3.8.1.1.74	MsecValue	read-only	Largest jitter encountered among packets counted as late.
C32 adVqmActCallLatePkts	1.3.6.1.4.1.664.5.53.5.3.8.1.1.89	Counter32	read-only	Total number of packets arriving late.
MSE adVqmActCallLateThresholdMs	1.3.6.1.4.1.664.5.53.5.3.8.1.1.70	MsecValue	read-only	Late threshold for SJB, packets arriving under this threshold are not discarded.
PER adVqmActCallLateThresholdPc	1.3.6.1.4.1.664.5.53.5.3.8.1.1.71	Percentage	read-only	Percentage of total packets (including both early and late packets) not judged as being under the late jitter threshold.
C32 adVqmActCallLateTotalCount	1.3.6.1.4.1.664.5.53.5.3.8.1.1.73	Counter32	read-only	Total count of late packets arriving after the expected delay.
C32 adVqmActCallLateUnderThresh	1.3.6.1.4.1.664.5.53.5.3.8.1.1.72	Counter32	read-only	Count of late packets which arrived under the late jitter threshold.
PER adVqmActCallLossRateAvg	1.3.6.1.4.1.664.5.53.5.3.8.1.1.64	Percentage	read-only	Total average percentage of frames lost or discarded.
MOS adVqmActCallMosCq	1.3.6.1.4.1.664.5.53.5.3.8.1.1.43	MOSvalue	read-only	Conversational quality MOS score.
MOS adVqmActCallMosLq	1.3.6.1.4.1.664.5.53.5.3.8.1.1.42	MOSvalue	read-only	Listening quality MOS score.
MOS adVqmActCallMosNominal	1.3.6.1.4.1.664.5.53.5.3.8.1.1.45	MOSvalue	read-only	Nominal or generally accepted maximum MOS score for this stream.
MOS adVqmActCallMosPq	1.3.6.1.4.1.664.5.53.5.3.8.1.1.44	MOSvalue	read-only	Listening quality MOS score normalized to the PESQ scale.
PER adVqmActCallNetworkLossAvg	1.3.6.1.4.1.664.5.53.5.3.8.1.1.65	Percentage	read-only	Total average percentage of frames lost in network, excludes SJB discards.
INT adVqmActCallOnewayDelayAverage	1.3.6.1.4.1.664.5.53.5.3.8.1.1.30	INTEGER	read-only	Average one-way delay including SJB delay.
INT adVqmActCallOnewayDelayInst	1.3.6.1.4.1.664.5.53.5.3.8.1.1.29	INTEGER	read-only	Instantaneous one-way delay including simulated jitter buffer (SJB) delay.
INT adVqmActCallOnewayDelayMaximum	1.3.6.1.4.1.664.5.53.5.3.8.1.1.31	INTEGER	read-only	Maximum one-way delay including SJB delay.
INT adVqmActCallOrigDelayAverage	1.3.6.1.4.1.664.5.53.5.3.8.1.1.33	INTEGER	read-only	Average origination end-point delay from RTCP XR reports.
INT adVqmActCallOrigDelayInst	1.3.6.1.4.1.664.5.53.5.3.8.1.1.32	INTEGER	read-only	Instantaneous origination end-point delay from RTCP XR reports.
INT adVqmActCallOrigDelayMaximum	1.3.6.1.4.1.664.5.53.5.3.8.1.1.34	INTEGER	read-only	Maximum origination end-point delay from RTCP XR reports.
C32 adVqmActCallOutOfOrder	1.3.6.1.4.1.664.5.53.5.3.8.1.1.23	Counter32	read-only	Total packets received out of order at simulated jitter buffer.
C32 adVqmActCallOverrunDiscardPkts	1.3.6.1.4.1.664.5.53.5.3.8.1.1.90	Counter32	read-only	Total number of packets discarded by SJB due to jitter buffer overrun.
U32 adVqmActCallPdvAverageMs	1.3.6.1.4.1.664.5.53.5.3.8.1.1.24	Unsigned32	read-only	Average Packet Delay Variation (PDV) in RTP stream in milliseconds.
U32 adVqmActCallPdvMaximumMs	1.3.6.1.4.1.664.5.53.5.3.8.1.1.25	Unsigned32	read-only	Maximum Packet Delay Variation (PDV) in RTP stream in milliseconds.
C32 adVqmActCallPktsDiscardedTotal	1.3.6.1.4.1.664.5.53.5.3.8.1.1.22	Counter32	read-only	Total packets discarded by simulated jitter buffer.
C32 adVqmActCallPktsLostTotal	1.3.6.1.4.1.664.5.53.5.3.8.1.1.21	Counter32	read-only	Total packets determined to be lost in network by simulated jitter buffer.
C32 adVqmActCallPktsRcvdTotal	1.3.6.1.4.1.664.5.53.5.3.8.1.1.20	Counter32	read-only	Total received RTP packets in this stream.
MSE adVqmActCallPpdvMsec	1.3.6.1.4.1.664.5.53.5.3.8.1.1.69	MsecValue	read-only	Packet to packed delay variation (jitter) in ms, as defined in RFC3550.
U32 adVqmActCallRCq	1.3.6.1.4.1.664.5.53.5.3.8.1.1.39	Unsigned32	read-only	Conversational quality R factor.
U32 adVqmActCallReliabilityIndex	1.3.6.1.4.1.664.5.53.5.3.8.1.1.101	Unsigned32	read-only	Reliability index for a fax or data call ranging from 0 least to 100 most reliable.
C32 adVqmActCallResyncCount	1.3.6.1.4.1.664.5.53.5.3.8.1.1.82	Counter32	read-only	Total number of SJB resynchronizations caused by discontinuous transmission (DTX), voice activity detection (VAD), or silence suppression.
U32 adVqmActCallRG107	1.3.6.1.4.1.664.5.53.5.3.8.1.1.41	Unsigned32	read-only	R factor based on ITU G.107 E Model for this stream.
U32 adVqmActCallRLq	1.3.6.1.4.1.664.5.53.5.3.8.1.1.38	Unsigned32	read-only	Listening quality R factor.
U32 adVqmActCallRNominal	1.3.6.1.4.1.664.5.53.5.3.8.1.1.40	Unsigned32	read-only	Nominal or generally accepted maximum R factor for this stream.
INT adVqmActCallRtDelayAverage	1.3.6.1.4.1.664.5.53.5.3.8.1.1.27	INTEGER	read-only	Average round-trip delay obtained from RTCP or RTCP XR reports.
INT adVqmActCallRtDelayInst	1.3.6.1.4.1.664.5.53.5.3.8.1.1.26	INTEGER	read-only	Instantaneous round-trip delay obtained from RTCP or RTCP XR reports.
INT adVqmActCallRtDelayMaximum	1.3.6.1.4.1.664.5.53.5.3.8.1.1.28	INTEGER	read-only	Maximum round-trip delay obtained from RTCP or RTCP XR reports.
IP adVqmActCallRtpDestIp	1.3.6.1.4.1.664.5.53.5.3.8.1.1.3	IpAddress	read-only	Destination IP address of RTP stream.
U32 adVqmActCallRtpDestPort	1.3.6.1.4.1.664.5.53.5.3.8.1.1.4	Unsigned32	read-only	Destination port number.
IP adVqmActCallRtpSourceIp	1.3.6.1.4.1.664.5.53.5.3.8.1.1.1	IpAddress	read-only	Source IP Address of RTP stream.
U32 adVqmActCallRtpSourcePort	1.3.6.1.4.1.664.5.53.5.3.8.1.1.2	Unsigned32	read-only	Source port number.
STR adVqmActCallRtpSourceUri	1.3.6.1.4.1.664.5.53.5.3.8.1.1.8	DisplayString	read-only	URI of sender RTP, either To URI or From URI.
STR adVqmActCallSourceIntDescription	1.3.6.1.4.1.664.5.53.5.3.8.1.1.13	DisplayString	read-only	Source interface description as defined in CLI or GUI.
STR adVqmActCallSourceIntName	1.3.6.1.4.1.664.5.53.5.3.8.1.1.11	DisplayString	read-only	Source interface name that RTP arrived inbound to unit.
U32 adVqmActCallSsrcid	1.3.6.1.4.1.664.5.53.5.3.8.1.1.5	Unsigned32	read-only	SSRC (synchronization source ID) for this stream per RFC3550.
INT adVqmActCallTermDelayAverage	1.3.6.1.4.1.664.5.53.5.3.8.1.1.36	INTEGER	read-only	Average termination end-point delay, simulated jitter buffer + codec.
INT adVqmActCallTermDelayMaximum	1.3.6.1.4.1.664.5.53.5.3.8.1.1.37	INTEGER	read-only	Maximum termination end-point delay, simulated jitter buffer + codec.
INT adVqmActCallTermDelayMinimum	1.3.6.1.4.1.664.5.53.5.3.8.1.1.35	INTEGER	read-only	Instantaneous termination end-point delay, simulated jitter buffer + codec.
U32 adVqmActCallThroughPutIndex	1.3.6.1.4.1.664.5.53.5.3.8.1.1.100	Unsigned32	read-only	Estimated throughput for fax or data call; bitrate range from 0 to 35000 bps, calculated based on gap/burst conditions and loss/discard rates.
STR adVqmActCallTo	1.3.6.1.4.1.664.5.53.5.3.8.1.1.6	DisplayString	read-only	To URI (dialed) from monitored SIP call signaling.
C32 adVqmActCallUnderrunDiscardPkts	1.3.6.1.4.1.664.5.53.5.3.8.1.1.91	Counter32	read-only	Total number of packets discarded by SJB due to jitter buffer underrun.
adVQMActive	1.3.6.1.4.1.664.5.53.5.3.8
adVQMActiveCallEntry	1.3.6.1.4.1.664.5.53.5.3.8.1.1		not-accessible	The statistics for a particular VoIP end-point device.
adVQMActiveCallGroup	1.3.6.1.4.1.664.5.53.99.10.1.7			The adVQMActiveCall group defines provides detail voice quality statistics on 'current' RTP voice streams.
adVQMActiveCallTable	1.3.6.1.4.1.664.5.53.5.3.8.1		not-accessible	The adVqmActiveCall table provides detail voice quality statistics on currently active RTP voice streams. A voice call will have two entries in this table one for each active RTP stream. A combination of Source IP Address and Port, Destination IP Address and Port, and SSRC (synchronization source ID) are necessary to uniquely identify the call session. The VQM Active Call table shares the same type of information as found in the Call History table. The VQM Manager transfers the active call statistics into the call history table database when the call completes.
U32 adVqmCallHistBitrate	1.3.6.1.4.1.664.5.53.5.3.7.1.1.102	Unsigned32	read-only	Actual bitrate of RTP stream, calculated using size of each RTP packet in bits and duration of audio represented in each packet, indication of required bandwidth.
C32 adVqmCallHistBurstCount	1.3.6.1.4.1.664.5.53.5.3.7.1.1.55	Counter32	read-only	Number of times the stream was in a burst condition.
U32 adVqmCallHistBurstLenAvgMsec	1.3.6.1.4.1.664.5.53.5.3.7.1.1.58	Unsigned32	read-only	Average burst length in miliseconds.
U32 adVqmCallHistBurstLenAvgPkts	1.3.6.1.4.1.664.5.53.5.3.7.1.1.57	Unsigned32	read-only	Average burst length in packets.
PER adVqmCallHistBurstRateAvg	1.3.6.1.4.1.664.5.53.5.3.7.1.1.56	Percentage	read-only	Total average percentage of frames lost or discarded while in burst condition.
U32 adVqmCallHistBurstRLq	1.3.6.1.4.1.664.5.53.5.3.7.1.1.54	Unsigned32	read-only	Average listening quality R factor during burst condition.
U32 adVqmCallHistCallDurationMs	1.3.6.1.4.1.664.5.53.5.3.7.1.1.16	Unsigned32	read-only	Elapsed time from start to last RTP packet on this stream.
STR adVqmCallHistCallid	1.3.6.1.4.1.664.5.53.5.3.7.1.1.9	DisplayString	read-only	SIP call-ID from monitored SIP call signaling.
STR adVqmCallHistCallStart	1.3.6.1.4.1.664.5.53.5.3.7.1.1.15	DisplayString	read-only	Time at which monitoring began on this RTP stream.
U32 adVqmCallHistCcmid	1.3.6.1.4.1.664.5.53.5.3.7.1.1.10	Unsigned32	read-only	Internal generated call-ID.
INT adVqmCallHistCodec	1.3.6.1.4.1.664.5.53.5.3.7.1.1.17	INTEGER	read-only	Last voice CODEC detected on this stream.
INT adVqmCallHistCodecClass	1.3.6.1.4.1.664.5.53.5.3.7.1.1.18	INTEGER	read-only	Class to which CODEC vocoder belongs.
PER adVqmCallHistDegDelay	1.3.6.1.4.1.664.5.53.5.3.7.1.1.50	Percentage	read-only	Percentage quality degradation due to delay.
PER adVqmCallHistDegDiscard	1.3.6.1.4.1.664.5.53.5.3.7.1.1.47	Percentage	read-only	Percentage quality degradation due to packet discard.
PER adVqmCallHistDegEcholvl	1.3.6.1.4.1.664.5.53.5.3.7.1.1.53	Percentage	read-only	Percentage quality degradation due to high echo levels.
PER adVqmCallHistDegLoss	1.3.6.1.4.1.664.5.53.5.3.7.1.1.46	Percentage	read-only	Percentage quality degradation due to packet loss.
PER adVqmCallHistDegNoiselvl	1.3.6.1.4.1.664.5.53.5.3.7.1.1.52	Percentage	read-only	Percentage quality degradation due to high noise levels.
PER adVqmCallHistDegRecency	1.3.6.1.4.1.664.5.53.5.3.7.1.1.49	Percentage	read-only	Percentage quality degradation due to loss or discard recency in call.
PER adVqmCallHistDegSiglvl	1.3.6.1.4.1.664.5.53.5.3.7.1.1.51	Percentage	read-only	Percentage quality degradation due to low speech energy signal level.
PER adVqmCallHistDegVocoder	1.3.6.1.4.1.664.5.53.5.3.7.1.1.48	Percentage	read-only	Percentage quality degradation due to voice CODEC selection.
U32 adVqmCallHistDelayAvgMsec	1.3.6.1.4.1.664.5.53.5.3.7.1.1.93	Unsigned32	read-only	Simulated jitter buffer delay average value.
U32 adVqmCallHistDelayCurrentMsec	1.3.6.1.4.1.664.5.53.5.3.7.1.1.95	Unsigned32	read-only	Simulated jitter buffer delay current value.
C32 adVqmCallHistDelayDecreaseCount	1.3.6.1.4.1.664.5.53.5.3.7.1.1.81	Counter32	read-only	Total number of SJB delay decreases (adaptive mode only).
C32 adVqmCallHistDelayIncreaseCount	1.3.6.1.4.1.664.5.53.5.3.7.1.1.80	Counter32	read-only	Total number of SJB delay increases (adaptive mode only).
U32 adVqmCallHistDelayMaxMsec	1.3.6.1.4.1.664.5.53.5.3.7.1.1.94	Unsigned32	read-only	Simulated jitter buffer delay maximum value.
U32 adVqmCallHistDelayMinMsec	1.3.6.1.4.1.664.5.53.5.3.7.1.1.92	Unsigned32	read-only	Simulated jitter buffer delay minimum value.
STR adVqmCallHistDestIntDescription	1.3.6.1.4.1.664.5.53.5.3.7.1.1.14	DisplayString	read-only	Destination interface description as defined in CLI or GUI.
STR adVqmCallHistDestIntName	1.3.6.1.4.1.664.5.53.5.3.7.1.1.12	DisplayString	read-only	Destination interface name for RTP.
PER adVqmCallHistDiscardRateAvg	1.3.6.1.4.1.664.5.53.5.3.7.1.1.66	Percentage	read-only	Total average percentage of frames discarded by SJB.
U32 adVqmCallHistDscp	1.3.6.1.4.1.664.5.53.5.3.7.1.1.19	Unsigned32	read-only	Differentiated Services Code Point (DSCP) in RTP packet IP header.
C32 adVqmCallHistDuplicatePkts	1.3.6.1.4.1.664.5.53.5.3.7.1.1.87	Counter32	read-only	Total number of duplicated packets discarded by SJB.
MSE adVqmCallHistEarlyPeakJitterMs	1.3.6.1.4.1.664.5.53.5.3.7.1.1.79	MsecValue	read-only	Largest jitter encountered among packets counted as early.
C32 adVqmCallHistEarlyPkts	1.3.6.1.4.1.664.5.53.5.3.7.1.1.88	Counter32	read-only	Total number of packets arriving early.
MSE adVqmCallHistEarlyThreshMs	1.3.6.1.4.1.664.5.53.5.3.7.1.1.75	MsecValue	read-only	Early threshold for SJB, packets arriving under this threshold will not be discarded by SJB as early.
PER adVqmCallHistEarlyThreshPc	1.3.6.1.4.1.664.5.53.5.3.7.1.1.76	Percentage	read-only	Percentage of total packets (including both early and late packets) not judged as being under the early jitter threshold.
C32 adVqmCallHistEarlyTotalCount	1.3.6.1.4.1.664.5.53.5.3.7.1.1.78	Counter32	read-only	Total count of early packets arriving before the expected delay.
C32 adVqmCallHistEarlyUnderThresh	1.3.6.1.4.1.664.5.53.5.3.7.1.1.77	Counter32	read-only	Count of early packets which arrived under the early jitter threshold.
U32 adVqmCallHistExcessBurst	1.3.6.1.4.1.664.5.53.5.3.7.1.1.67	Unsigned32	read-only	Total length of speech lost during burst conditions not handled effectively by packet loss-concealment.
U32 adVqmCallHistExcessGap	1.3.6.1.4.1.664.5.53.5.3.7.1.1.68	Unsigned32	read-only	Total length of speech lost during gap conditions not handled effectively by packet loss-concealment.
INT adVqmCallHistExtRCqIn	1.3.6.1.4.1.664.5.53.5.3.7.1.1.98	INTEGER	read-only	External conversational quality R factor (in), from RTCP XR report (RFC3611).
INT adVqmCallHistExtRCqOut	1.3.6.1.4.1.664.5.53.5.3.7.1.1.99	INTEGER	read-only	External conversational quality R factor (out), from RTCP XR report (RFC3611).
INT adVqmCallHistExtRLqIn	1.3.6.1.4.1.664.5.53.5.3.7.1.1.96	INTEGER	read-only	External listening quality R factor (in), from RTCP XR report (RFC3611).
INT adVqmCallHistExtRLqOut	1.3.6.1.4.1.664.5.53.5.3.7.1.1.97	INTEGER	read-only	External listening quality R factor (out), from RTCP XR report (RFC3611).
STR adVqmCallHistFrom	1.3.6.1.4.1.664.5.53.5.3.7.1.1.7	DisplayString	read-only	From URI (originating caller) from monitored SIP call signaling.
C32 adVqmCallHistGapCount	1.3.6.1.4.1.664.5.53.5.3.7.1.1.60	Counter32	read-only	Number of times the stream is in gap condition.
U32 adVqmCallHistGapLenMsec	1.3.6.1.4.1.664.5.53.5.3.7.1.1.63	Unsigned32	read-only	Average gap length in milliseconds.
U32 adVqmCallHistGapLenPkts	1.3.6.1.4.1.664.5.53.5.3.7.1.1.62	Unsigned32	read-only	Average gap length in packets.
PER adVqmCallHistGapLossRateAvg	1.3.6.1.4.1.664.5.53.5.3.7.1.1.61	Percentage	read-only	Total average percentage of frames lost or discarded while in gap condition.
U32 adVqmCallHistGapR	1.3.6.1.4.1.664.5.53.5.3.7.1.1.59	Unsigned32	read-only	Average listening quality R factor while stream is in a gap condition.
U32 adVqmCallHistJbCfgMax	1.3.6.1.4.1.664.5.53.5.3.7.1.1.86	Unsigned32	read-only	Adaptive jitter buffer upper bound on delay applied to packets received, or fixed jitter buffer maximum number of packets that will be inserted in buffer.
U32 adVqmCallHistJbCfgMin	1.3.6.1.4.1.664.5.53.5.3.7.1.1.84	Unsigned32	read-only	Adaptive jitter buffer minimum delay applied to packets received.
U32 adVqmCallHistJbCfgNom	1.3.6.1.4.1.664.5.53.5.3.7.1.1.85	Unsigned32	read-only	Adaptive jitter buffer inital delay applied to packets received, or fixed jitter buffer delay applied to each packet.
INT adVqmCallHistJitterBufferType	1.3.6.1.4.1.664.5.53.5.3.7.1.1.83	INTEGER	read-only	Configured SJB type either adaptive or fixed for this stream.
MSE adVqmCallHistLatePeakJitterMs	1.3.6.1.4.1.664.5.53.5.3.7.1.1.74	MsecValue	read-only	Largest jitter encountered among packets counted as late.
C32 adVqmCallHistLatePkts	1.3.6.1.4.1.664.5.53.5.3.7.1.1.89	Counter32	read-only	Total number of packets arriving late.
MSE adVqmCallHistLateThresholdMs	1.3.6.1.4.1.664.5.53.5.3.7.1.1.70	MsecValue	read-only	Late threshold for SJB, packets arriving under this threshold are not discarded.
PER adVqmCallHistLateThresholdPc	1.3.6.1.4.1.664.5.53.5.3.7.1.1.71	Percentage	read-only	Percentage of total packets (including both early and late packets) not judged as being under the late jitter threshold.
C32 adVqmCallHistLateTotalCount	1.3.6.1.4.1.664.5.53.5.3.7.1.1.73	Counter32	read-only	Total count of late packets arriving after the expected delay.
C32 adVqmCallHistLateUnderThresh	1.3.6.1.4.1.664.5.53.5.3.7.1.1.72	Counter32	read-only	Count of late packets which arrived under the late jitter threshold.
PER adVqmCallHistLossRateAvg	1.3.6.1.4.1.664.5.53.5.3.7.1.1.64	Percentage	read-only	Total average percentage of frames lost or discarded.
MOS adVqmCallHistMosCq	1.3.6.1.4.1.664.5.53.5.3.7.1.1.43	MOSvalue	read-only	Conversational quality MOS score.
MOS adVqmCallHistMosLq	1.3.6.1.4.1.664.5.53.5.3.7.1.1.42	MOSvalue	read-only	Listening quality MOS score.
MOS adVqmCallHistMosNominal	1.3.6.1.4.1.664.5.53.5.3.7.1.1.45	MOSvalue	read-only	Nominal or generally accepted maximum MOS score for this stream.
MOS adVqmCallHistMosPq	1.3.6.1.4.1.664.5.53.5.3.7.1.1.44	MOSvalue	read-only	Listening quality MOS score normalized to the PESQ scale.
PER adVqmCallHistNetworkLossAvg	1.3.6.1.4.1.664.5.53.5.3.7.1.1.65	Percentage	read-only	Total average percentage of frames lost in network, excludes SJB discards.
INT adVqmCallHistOnewayDelayAverage	1.3.6.1.4.1.664.5.53.5.3.7.1.1.30	INTEGER	read-only	Average one-way delay including SJB delay.
INT adVqmCallHistOnewayDelayInst	1.3.6.1.4.1.664.5.53.5.3.7.1.1.29	INTEGER	read-only	Instantaneous one-way delay including simulated jitter buffer (SJB) delay.
INT adVqmCallHistOnewayDelayMaximum	1.3.6.1.4.1.664.5.53.5.3.7.1.1.31	INTEGER	read-only	Maximum one-way delay including SJB delay.
INT adVqmCallHistOrigDelayAverage	1.3.6.1.4.1.664.5.53.5.3.7.1.1.33	INTEGER	read-only	Average origination end-point delay from RTCP XR reports.
INT adVqmCallHistOrigDelayInst	1.3.6.1.4.1.664.5.53.5.3.7.1.1.32	INTEGER	read-only	Instantaneous origination end-point delay from RTCP XR reports.
INT adVqmCallHistOrigDelayMaximum	1.3.6.1.4.1.664.5.53.5.3.7.1.1.34	INTEGER	read-only	Maximum origination end-point delay from RTCP XR reports.
adVQMCallHistoryEntry	1.3.6.1.4.1.664.5.53.5.3.7.1.1		not-accessible	The statistics for a particular VoIP end-point device.
adVQMCallHistoryGroup	1.3.6.1.4.1.664.5.53.99.10.1.6			The adVQMCallHistory group defines provides detail voice quality statistics on 'completed' RTP voice streams.
adVQMCallHistoryTable	1.3.6.1.4.1.664.5.53.5.3.7.1		not-accessible	The adVqmCallHistory table provides detail voice quality statistics on completed RTP voice streams. A voice call will typically have two entries in this table one for each RTP stream. A combination of Source IP Address and Port, Destination IP Address and Port, and SSRC (synchronization source ID) are necessary to uniquely identify the call session. One management option is to configure VQM to only save call history information for poor quality calls that exceed threshold limits. Threshold limit settings are available for MOS scores and packet statistics for loss, out-of-order, and jitter. Setting the maximum call history buffer size to a lower value (default is 100 streams) can reduce the amount of data transfer to the NMS during a SNMP query.
C32 adVqmCallHistOutOfOrder	1.3.6.1.4.1.664.5.53.5.3.7.1.1.23	Counter32	read-only	Total packets received out of order at simulated jitter buffer.
C32 adVqmCallHistOverrunDiscardPkts	1.3.6.1.4.1.664.5.53.5.3.7.1.1.90	Counter32	read-only	Total number of packets discarded by SJB due to jitter buffer overrun.
U32 adVqmCallHistPdvAverageMs	1.3.6.1.4.1.664.5.53.5.3.7.1.1.24	Unsigned32	read-only	Average Packet Delay Variation (PDV) in RTP stream in milliseconds.
U32 adVqmCallHistPdvMaximumMs	1.3.6.1.4.1.664.5.53.5.3.7.1.1.25	Unsigned32	read-only	Maximum Packet Delay Variation (PDV) in RTP stream in milliseconds.
C32 adVqmCallHistPktsDiscardedTotal	1.3.6.1.4.1.664.5.53.5.3.7.1.1.22	Counter32	read-only	Total packets discarded by simulated jitter buffer.
C32 adVqmCallHistPktsLostTotal	1.3.6.1.4.1.664.5.53.5.3.7.1.1.21	Counter32	read-only	Total packets determined to be lost in network by simulated jitter buffer.
C32 adVqmCallHistPktsRcvdTotal	1.3.6.1.4.1.664.5.53.5.3.7.1.1.20	Counter32	read-only	Total received RTP packets in this stream.
MSE adVqmCallHistPpdvMsec	1.3.6.1.4.1.664.5.53.5.3.7.1.1.69	MsecValue	read-only	Packet to packed delay variation (jitter) in ms, as defined in RFC3550.
U32 adVqmCallHistRCq	1.3.6.1.4.1.664.5.53.5.3.7.1.1.39	Unsigned32	read-only	Conversational quality R factor.
U32 adVqmCallHistReliabilityIndex	1.3.6.1.4.1.664.5.53.5.3.7.1.1.101	Unsigned32	read-only	Reliability index for a fax or data call ranging from 0 least to 100 most reliable.
C32 adVqmCallHistResyncCount	1.3.6.1.4.1.664.5.53.5.3.7.1.1.82	Counter32	read-only	Total number of SJB resynchronizations caused by discontinuous transmission (DTX), voice activity detection (VAD), or silence suppression.
U32 adVqmCallHistRG107	1.3.6.1.4.1.664.5.53.5.3.7.1.1.41	Unsigned32	read-only	R factor based on ITU G.107 E Model for this stream.
U32 adVqmCallHistRLq	1.3.6.1.4.1.664.5.53.5.3.7.1.1.38	Unsigned32	read-only	Listening quality R factor.
U32 adVqmCallHistRNominal	1.3.6.1.4.1.664.5.53.5.3.7.1.1.40	Unsigned32	read-only	Nominal or generally accepted maximum R factor for this stream.
INT adVqmCallHistRtDelayAverage	1.3.6.1.4.1.664.5.53.5.3.7.1.1.27	INTEGER	read-only	Average round-trip delay obtained from RTCP or RTCP XR reports.
INT adVqmCallHistRtDelayInst	1.3.6.1.4.1.664.5.53.5.3.7.1.1.26	INTEGER	read-only	Instantaneous round-trip delay obtained from RTCP or RTCP XR reports.
INT adVqmCallHistRtDelayMaximum	1.3.6.1.4.1.664.5.53.5.3.7.1.1.28	INTEGER	read-only	Maximum round-trip delay obtained from RTCP or RTCP XR reports.
IP adVqmCallHistRtpDestIp	1.3.6.1.4.1.664.5.53.5.3.7.1.1.3	IpAddress	read-only	Destination IP address of RTP stream.
U32 adVqmCallHistRtpDestPort	1.3.6.1.4.1.664.5.53.5.3.7.1.1.4	Unsigned32	read-only	Destination port number.
IP adVqmCallHistRtpSourceIp	1.3.6.1.4.1.664.5.53.5.3.7.1.1.1	IpAddress	read-only	Source IP Address of RTP stream.
U32 adVqmCallHistRtpSourcePort	1.3.6.1.4.1.664.5.53.5.3.7.1.1.2	Unsigned32	read-only	Source port number.
STR adVqmCallHistRtpSourceUri	1.3.6.1.4.1.664.5.53.5.3.7.1.1.8	DisplayString	read-only	URI of sender RTP, either To URI or From URI.
STR adVqmCallHistSourceIntDescription	1.3.6.1.4.1.664.5.53.5.3.7.1.1.13	DisplayString	read-only	Source interface description as defined in CLI or GUI.
STR adVqmCallHistSourceIntName	1.3.6.1.4.1.664.5.53.5.3.7.1.1.11	DisplayString	read-only	Source interface name that RTP arrived inbound to unit.
U32 adVqmCallHistSsrcid	1.3.6.1.4.1.664.5.53.5.3.7.1.1.5	Unsigned32	read-only	SSRC (synchronization source ID) for this stream per RFC3550.
INT adVqmCallHistTermDelayAverage	1.3.6.1.4.1.664.5.53.5.3.7.1.1.36	INTEGER	read-only	Average termination end-point delay, simulated jitter buffer + codec.
INT adVqmCallHistTermDelayMaximum	1.3.6.1.4.1.664.5.53.5.3.7.1.1.37	INTEGER	read-only	Maximum termination end-point delay, simulated jitter buffer + codec.
INT adVqmCallHistTermDelayMinimum	1.3.6.1.4.1.664.5.53.5.3.7.1.1.35	INTEGER	read-only	Instantaneous termination end-point delay, simulated jitter buffer + codec.
U32 adVqmCallHistThroughPutIndex	1.3.6.1.4.1.664.5.53.5.3.7.1.1.100	Unsigned32	read-only	Estimated throughput for fax or data call; bitrate range from 0 to 35000 bps, calculated based on gap/burst conditions and loss/discard rates.
STR adVqmCallHistTo	1.3.6.1.4.1.664.5.53.5.3.7.1.1.6	DisplayString	read-only	To URI (dialed) from monitored SIP call signaling.
C32 adVqmCallHistUnderrunDiscardPkts	1.3.6.1.4.1.664.5.53.5.3.7.1.1.91	Counter32	read-only	Total number of packets discarded by SJB due to jitter buffer underrun.
adVQMCfg	1.3.6.1.4.1.664.5.53.5.3.2
U32 adVqmCfgCallHistorySize	1.3.6.1.4.1.664.5.53.5.3.2.15	Unsigned32	read-only	Size of Call History buffer.
INT adVqmCfgClear	1.3.6.1.4.1.664.5.53.5.3.2.22	INTEGER	read-write	Clear all VQM statistics. This is a write-only variable. A read will result in no action being taken.
INT adVqmCfgClearCallHistory	1.3.6.1.4.1.664.5.53.5.3.2.23	INTEGER	read-write	Clear only call history buffer. This is a write-only variable. A read will result in no action being taken.
INT adVqmCfgEnable	1.3.6.1.4.1.664.5.53.5.3.2.1	INTEGER	read-only	VQM feature global enable/disable.
adVQMCfgGroup	1.3.6.1.4.1.664.5.53.99.10.1.1			The adVQMCfg group contains read-only VQM system configuration information for global enable/disable, type of RTP stream detection, jitter buffer emulator settings, ping settings for measuring delay, and call history buffer filter threshold values. Network Management System may read these values to augment their charts and graphs of VQM performance statistics. Clear write-only controls provide the NMS the ability to clear VQM performance statistics.
MOS adVqmCfgHistoryThresholdCqmos	1.3.6.1.4.1.664.5.53.5.3.2.17	MOSvalue	read-only	Store history statistics if below CQ MOS threshold value.
U32 adVqmCfgHistoryThresholdJitter	1.3.6.1.4.1.664.5.53.5.3.2.21	Unsigned32	read-only	Store history statistics if Jitter exceeds threshold value.
U32 adVqmCfgHistoryThresholdLoss	1.3.6.1.4.1.664.5.53.5.3.2.19	Unsigned32	read-only	Store history statistics if loss packets are greater than threshold value.
MOS adVqmCfgHistoryThresholdLqmos	1.3.6.1.4.1.664.5.53.5.3.2.16	MOSvalue	read-only	Store history statistics if below LQ MOS threshold value.
U32 adVqmCfgHistoryThresholdOutOfOrder	1.3.6.1.4.1.664.5.53.5.3.2.20	Unsigned32	read-only	Store history statistics if Out of Order packets are greater than threshold value.
MOS adVqmCfgHistoryThresholdPqmos	1.3.6.1.4.1.664.5.53.5.3.2.18	MOSvalue	read-only	Store history statistics if below PESQ MOS threshold value.
INT adVqmCfgInternationalCode	1.3.6.1.4.1.664.5.53.5.3.2.4	INTEGER	read-only	Regional scoring adjustment for VQM calculations.
U32 adVqmCfgJitterBufferAdaptiveMax	1.3.6.1.4.1.664.5.53.5.3.2.8	Unsigned32	read-only	Adaptive maximum jitter buffer delay (40-320 ms).
U32 adVqmCfgJitterBufferAdaptiveMin	1.3.6.1.4.1.664.5.53.5.3.2.6	Unsigned32	read-only	Minimum adaptive jitter buffer delay (10-240 ms).
U32 adVqmCfgJitterBufferAdaptiveNominal	1.3.6.1.4.1.664.5.53.5.3.2.7	Unsigned32	read-only	Adaptive starting delay applied to packets (10-240 ms).
U32 adVqmCfgJitterBufferFixedNominal	1.3.6.1.4.1.664.5.53.5.3.2.9	Unsigned32	read-only	Fixed jitter buffer constant delay applied to packets (4-250 ms).
U32 adVqmCfgJitterBufferFixedSize	1.3.6.1.4.1.664.5.53.5.3.2.10	Unsigned32	read-only	Number packets fixed jitter buffer can hold (10-500 pkts).
U32 adVqmCfgJitterBufferThresholdEarlyMs	1.3.6.1.4.1.664.5.53.5.3.2.11	Unsigned32	read-only	Jitter buffer threshold for early arriving packets.
U32 adVqmCfgJitterBufferThresholdLateMs	1.3.6.1.4.1.664.5.53.5.3.2.12	Unsigned32	read-only	Jitter buffer threshold for late arriving packets.
INT adVqmCfgJitterBufferType	1.3.6.1.4.1.664.5.53.5.3.2.5	INTEGER	read-only	Regional scoring adjustment for VQM calculations.
INT adVqmCfgRoundTripPingEnabled	1.3.6.1.4.1.664.5.53.5.3.2.13	INTEGER	read-only	Ping use for measuring round-trip delay between end-points.
INT adVqmCfgRoundTripPingType	1.3.6.1.4.1.664.5.53.5.3.2.14	INTEGER	read-only	ICMP Ping or ICMP Timestamp used for delay measurements.
INT adVqmCfgSipEnable	1.3.6.1.4.1.664.5.53.5.3.2.2	INTEGER	read-only	VQM uses SIP signaling to monitor for RTP traffic.
INT adVqmCfgUdpEnable	1.3.6.1.4.1.664.5.53.5.3.2.3	INTEGER	read-only	VQM uses UDP packet inspection to monitor for RTP traffic.
NTF adVQMEndOfCallTrap	1.3.6.1.4.1.664.5.53.5.3.0.1			This trap indicates that the severity level has been met at the end of a call to generate a trap. Enable this trap using adVqmTrapState. The severity level, by default, is set to warning. Use adVqmTrapCfgSeverityLevel to change the severity level setting.
adVQMEndPoint	1.3.6.1.4.1.664.5.53.5.3.6
adVQMEndPointEntry	1.3.6.1.4.1.664.5.53.5.3.6.1.1		not-accessible	The statistics for a particular VoIP end-point device.
adVQMEndPointGroup	1.3.6.1.4.1.664.5.53.99.10.1.5			The adVQMEndPoint group defines aggregate statistics for each VoIP end-point entity.
U32 adVqmEndPointInterfaceId	1.3.6.1.4.1.664.5.53.5.3.6.1.1.3	Unsigned32	read-only	Interface index that received RTP stream from this end-point.
STR adVqmEndPointInterfaceName	1.3.6.1.4.1.664.5.53.5.3.6.1.1.4	DisplayString	read-only	Interface name that received RTP stream from this end-point.
U32 adVqmEndPointJitterMaximum	1.3.6.1.4.1.664.5.53.5.3.6.1.1.13	Unsigned32	read-only	Maximum jitter.
MOS adVqmEndPointMosLqAverage	1.3.6.1.4.1.664.5.53.5.3.6.1.1.6	MOSvalue	read-only	Average listening quality MOS score.
MOS adVqmEndPointMosLqMaximum	1.3.6.1.4.1.664.5.53.5.3.6.1.1.7	MOSvalue	read-only	Maximum listening quality MOS score.
MOS adVqmEndPointMosLqMinimum	1.3.6.1.4.1.664.5.53.5.3.6.1.1.5	MOSvalue	read-only	Minimum listening quality MOS score.
MOS adVqmEndPointMosPqAverage	1.3.6.1.4.1.664.5.53.5.3.6.1.1.9	MOSvalue	read-only	Average PESQ MOS score.
MOS adVqmEndPointMosPqMaximum	1.3.6.1.4.1.664.5.53.5.3.6.1.1.10	MOSvalue	read-only	Maximum PESQ MOS score.
MOS adVqmEndPointMosPqMinimum	1.3.6.1.4.1.664.5.53.5.3.6.1.1.8	MOSvalue	read-only	Minimum PESQ MOS score.
C32 adVqmEndPointNumberCompletedCalls	1.3.6.1.4.1.664.5.53.5.3.6.1.1.2	Counter32	read-only	Number of completed calls on this end-point.
C32 adVqmEndPointNumberStreamsExcellent	1.3.6.1.4.1.664.5.53.5.3.6.1.1.14	Counter32	read-only	Number voice streams with excellent MOS score.
C32 adVqmEndPointNumberStreamsFair	1.3.6.1.4.1.664.5.53.5.3.6.1.1.16	Counter32	read-only	Number voice streams with fair MOS score.
C32 adVqmEndPointNumberStreamsGood	1.3.6.1.4.1.664.5.53.5.3.6.1.1.15	Counter32	read-only	Number voice streams with good MOS score.
C32 adVqmEndPointNumberStreamsPoor	1.3.6.1.4.1.664.5.53.5.3.6.1.1.17	Counter32	read-only	Number voice streams with poor MOS score.
C32 adVqmEndPointPktsLostTotal	1.3.6.1.4.1.664.5.53.5.3.6.1.1.11	Counter32	read-only	Total packets lost.
C32 adVqmEndPointPktsOutOfOrder	1.3.6.1.4.1.664.5.53.5.3.6.1.1.12	Counter32	read-only	Total out-of-order packets.
IP adVqmEndPointRtpSourceIp	1.3.6.1.4.1.664.5.53.5.3.6.1.1.1	IpAddress	read-only	Source IP Address of RTP stream from this end-point.
adVQMEndPointTable	1.3.6.1.4.1.664.5.53.5.3.6.1		not-accessible	The adVqmEndPoint table provides aggregate statistics for each VoIP end-point device. The RTP Source IP address, adVqmEndPointRtpSourceIp, provides a unique table index. The VQM End-point table provides summary statistics for MOS scores, packets lost, out-of-order, jitter, delay and quality analysis counts.
adVQMHistory	1.3.6.1.4.1.664.5.53.5.3.7
INT adVqmIfcClear	1.3.6.1.4.1.664.5.53.5.3.5.1.1.42	INTEGER	read-write	Clear all VQM statistics. This is a write-only variable. A read will result in no action being taken.
U32 adVqmIfcDelayAvgMsec	1.3.6.1.4.1.664.5.53.5.3.5.1.1.36	Unsigned32	read-only	Average packet delay in ms.
U32 adVqmIfcDelayMaxMsec	1.3.6.1.4.1.664.5.53.5.3.5.1.1.37	Unsigned32	read-only	Maximum packet delay in ms.
U32 adVqmIfcDelayMinMsec	1.3.6.1.4.1.664.5.53.5.3.5.1.1.35	Unsigned32	read-only	Minimum packet delay in ms.
U32 adVqmIfcDiscardsAverage	1.3.6.1.4.1.664.5.53.5.3.5.1.1.31	Unsigned32	read-only	Average packets discarded due to late or early arrival.
U32 adVqmIfcDiscardsMaximum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.32	Unsigned32	read-only	Maximum packets discarded due to late or early arrival.
U32 adVqmIfcDiscardsMinimum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.30	Unsigned32	read-only	Minimum packets discarded due to late or early arrival.
U32 adVqmIfcId	1.3.6.1.4.1.664.5.53.5.3.5.1.1.1	Unsigned32	read-only	VQM interface index number. This number is unique to the VQM MIB.
U32 adVqmIfcLossAverage	1.3.6.1.4.1.664.5.53.5.3.5.1.1.28	Unsigned32	read-only	Average network lost packets for all calls completed.
U32 adVqmIfcLossMaximum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.29	Unsigned32	read-only	Maximum network lost packets for all calls completed.
U32 adVqmIfcLossMinimum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.27	Unsigned32	read-only	Minimum network lost packets for all calls completed.
MOS adVqmIfcMosCqAverage	1.3.6.1.4.1.664.5.53.5.3.5.1.1.22	MOSvalue	read-only	Average conversation quality MOS score.
MOS adVqmIfcMosCqMaximum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.23	MOSvalue	read-only	Maximum conversation quality MOS score.
MOS adVqmIfcMosCqMinimum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.21	MOSvalue	read-only	Minimum conversation quality MOS score.
MOS adVqmIfcMosLqAverage	1.3.6.1.4.1.664.5.53.5.3.5.1.1.19	MOSvalue	read-only	Average listening quality MOS score.
MOS adVqmIfcMosLqMaximum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.20	MOSvalue	read-only	Maximum listening quality MOS score.
MOS adVqmIfcMosLqMinimum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.18	MOSvalue	read-only	Minimum listening quality MOS score.
MOS adVqmIfcMosPqAverage	1.3.6.1.4.1.664.5.53.5.3.5.1.1.25	MOSvalue	read-only	Average PESQ, P.862 raw MOS score.
MOS adVqmIfcMosPqMaximum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.26	MOSvalue	read-only	Maximum PESQ, P.862 raw MOS score.
MOS adVqmIfcMosPqMinimum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.24	MOSvalue	read-only	Minimum PESQ, P.862 raw MOS score.
STR adVqmIfcName	1.3.6.1.4.1.664.5.53.5.3.5.1.1.2	DisplayString	read-only	Interface name.
C32 adVqmIfcNumberActiveCalls	1.3.6.1.4.1.664.5.53.5.3.5.1.1.7	Counter32	read-only	Number of active calls.
C32 adVqmIfcNumberStreamsExcellent	1.3.6.1.4.1.664.5.53.5.3.5.1.1.38	Counter32	read-only	Number voice streams with excellent MOS score.
C32 adVqmIfcNumberStreamsFair	1.3.6.1.4.1.664.5.53.5.3.5.1.1.40	Counter32	read-only	Number voice streams with fair MOS score.
C32 adVqmIfcNumberStreamsGood	1.3.6.1.4.1.664.5.53.5.3.5.1.1.39	Counter32	read-only	Number voice streams with good MOS score.
C32 adVqmIfcNumberStreamsPoor	1.3.6.1.4.1.664.5.53.5.3.5.1.1.41	Counter32	read-only	Number voice streams with poor MOS score.
INT adVqmIfcPdvAverageMs	1.3.6.1.4.1.664.5.53.5.3.5.1.1.33	INTEGER	read-only	Mean of Average packet delay variation for packets.
INT adVqmIfcPdvMaximumMs	1.3.6.1.4.1.664.5.53.5.3.5.1.1.34	INTEGER	read-only	Maximum of reported average packet delay variation.
C64 adVqmIfcPktsDiscarded	1.3.6.1.4.1.664.5.53.5.3.5.1.1.6	Counter64	read-only	Packets discarded.
C64 adVqmIfcPktsLost	1.3.6.1.4.1.664.5.53.5.3.5.1.1.4	Counter64	read-only	Packets lost.
C64 adVqmIfcPktsOoo	1.3.6.1.4.1.664.5.53.5.3.5.1.1.5	Counter64	read-only	Packets received out-of-order.
C64 adVqmIfcPktsRx	1.3.6.1.4.1.664.5.53.5.3.5.1.1.3	Counter64	read-only	Packets received.
U32 adVqmIfcRCqAverage	1.3.6.1.4.1.664.5.53.5.3.5.1.1.13	Unsigned32	read-only	Average conversation quality R Factor.
U32 adVqmIfcRCqMaximum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.14	Unsigned32	read-only	Maximum conversation quality R Factor.
U32 adVqmIfcRCqMinimum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.12	Unsigned32	read-only	Minimum conversation quality R Factor.
U32 adVqmIfcRG107Average	1.3.6.1.4.1.664.5.53.5.3.5.1.1.16	Unsigned32	read-only	Average G.107 R Factor.
U32 adVqmIfcRG107Maximum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.17	Unsigned32	read-only	Maximum G.107 R Factor.
U32 adVqmIfcRG107Minimum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.15	Unsigned32	read-only	Minimum G.107 R Factor.
U32 adVqmIfcRLqAverage	1.3.6.1.4.1.664.5.53.5.3.5.1.1.10	Unsigned32	read-only	Average listening quality R Factor.
U32 adVqmIfcRLqMaximum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.11	Unsigned32	read-only	Maximum listening quality R Factor.
U32 adVqmIfcRLqMinimum	1.3.6.1.4.1.664.5.53.5.3.5.1.1.9	Unsigned32	read-only	Minimum listening quality R Factor.
C32 adVqmIfcTerminatedCalls	1.3.6.1.4.1.664.5.53.5.3.5.1.1.8	Counter32	read-only	Number of terminated calls.
adVQMInterface	1.3.6.1.4.1.664.5.53.5.3.5
adVQMInterfaceEntry	1.3.6.1.4.1.664.5.53.5.3.5.1.1		not-accessible	The statistics for a particular interface.
adVQMInterfaceGroup	1.3.6.1.4.1.664.5.53.99.10.1.4			The adVQMInterface group defines aggregate statistics for each system interface.
adVQMInterfaceTable	1.3.6.1.4.1.664.5.53.5.3.5.1		not-accessible	The adVqmInterface table provides aggregate statistics for each system interface. VQM processes RTP stream packets as received by the interface (inbound direction). The user can enable or disable each system interface for VQM using the CLI/GUI. The VQM interface table objects include enable/disable, packet statistics for number received, lost, out-of-order, discarded, number of active and completed calls, MOS scores, delay measurements, and quality analysis counts.
adVQMNotificationGroup	1.3.6.1.4.1.664.5.53.99.10.1.9			Traps which may be used to enhance event driven management of VQM.
C32 adVqmSysActiveCalls	1.3.6.1.4.1.664.5.53.5.3.4.1	Counter32	read-only	Number of active calls.
C32 adVqmSysActiveExcellent	1.3.6.1.4.1.664.5.53.5.3.4.2	Counter32	read-only	Active calls in excellent MOS range (4.400 - 4.000).
C32 adVqmSysActiveFair	1.3.6.1.4.1.664.5.53.5.3.4.4	Counter32	read-only	Active calls in fair MOS range (3.599 - 2.600).
C32 adVqmSysActiveGood	1.3.6.1.4.1.664.5.53.5.3.4.3	Counter32	read-only	Active calls in good MOS range (3.999 - 3.600).
C32 adVqmSysActivePoor	1.3.6.1.4.1.664.5.53.5.3.4.5	Counter32	read-only	Active calls in poor MOS range (2.599 - 0.000).
C32 adVqmSysAllCallsExcellent	1.3.6.1.4.1.664.5.53.5.3.4.11	Counter32	read-only	Total calls in excellent MOS range.
C32 adVqmSysAllCallsFair	1.3.6.1.4.1.664.5.53.5.3.4.13	Counter32	read-only	Total calls in fair MOS range.
C32 adVqmSysAllCallsGood	1.3.6.1.4.1.664.5.53.5.3.4.12	Counter32	read-only	Total calls in good MOS range.
C32 adVqmSysAllCallsPoor	1.3.6.1.4.1.664.5.53.5.3.4.14	Counter32	read-only	Total calls in poor MOS range.
C32 adVqmSysCallHistoryCalls	1.3.6.1.4.1.664.5.53.5.3.4.6	Counter32	read-only	Number of calls in history buffer.
C32 adVqmSysCallHistoryExcellent	1.3.6.1.4.1.664.5.53.5.3.4.7	Counter32	read-only	History calls in excellent MOS range.
C32 adVqmSysCallHistoryFair	1.3.6.1.4.1.664.5.53.5.3.4.9	Counter32	read-only	History calls in fair MOS range.
C32 adVqmSysCallHistoryGood	1.3.6.1.4.1.664.5.53.5.3.4.8	Counter32	read-only	History calls in good MOS range.
C32 adVqmSysCallHistoryPoor	1.3.6.1.4.1.664.5.53.5.3.4.10	Counter32	read-only	History calls in poor MOS range.
adVQMSysPerf	1.3.6.1.4.1.664.5.53.5.3.4
adVQMSysPerfGroup	1.3.6.1.4.1.664.5.53.99.10.1.3			The adVQMSysPerfGroup group provides an overall summary view of the quality of voice streams flowing through the system. VQM voice call analysis rates the quality of RTP voice streams as Excellent, Good, Fair or Poor. The numbers of calls for each quality rating are available for currently active calls, completed calls (history), and all calls (totals). The total number of calls monitored by VQM is the sum of active calls adVqmSysActiveCalls) and history calls (adVqmSysCallHistoryCalls).
adVQMThreshold	1.3.6.1.4.1.664.5.53.5.3.3
adVQMThresholdGroup	1.3.6.1.4.1.664.5.53.99.10.1.2			The adVQMThreshold group contains read-only configuration threshold setting values for VQM event messages. Threshold values include Information, Notice, Warning, and Error events for MOS scores, packet loss, out-of-order, and jitter.
U32 adVqmThresholdJitterError	1.3.6.1.4.1.664.5.53.5.3.3.20	Unsigned32	read-only	Jitter threshold value for error event.
U32 adVqmThresholdJitterInfo	1.3.6.1.4.1.664.5.53.5.3.3.17	Unsigned32	read-only	Jitter threshold value for info event.
U32 adVqmThresholdJitterNotice	1.3.6.1.4.1.664.5.53.5.3.3.18	Unsigned32	read-only	Jitter threshold value for notice event.
U32 adVqmThresholdJitterWarning	1.3.6.1.4.1.664.5.53.5.3.3.19	Unsigned32	read-only	Jitter threshold value for warning event.
U32 adVqmThresholdLossError	1.3.6.1.4.1.664.5.53.5.3.3.16	Unsigned32	read-only	Loss of packet threshold value for error event.
U32 adVqmThresholdLossInfo	1.3.6.1.4.1.664.5.53.5.3.3.13	Unsigned32	read-only	Loss of packet threshold value for info event.
U32 adVqmThresholdLossNotice	1.3.6.1.4.1.664.5.53.5.3.3.14	Unsigned32	read-only	Loss of packet threshold value for notice event.
U32 adVqmThresholdLossWarning	1.3.6.1.4.1.664.5.53.5.3.3.15	Unsigned32	read-only	Loss of packet threshold value for warning event.
MOS adVqmThresholdLqmosError	1.3.6.1.4.1.664.5.53.5.3.3.4	MOSvalue	read-only	Listening Quality MOS threshold value for error event.
MOS adVqmThresholdLqmosInfo	1.3.6.1.4.1.664.5.53.5.3.3.1	MOSvalue	read-only	Listening Quality MOS threshold value for info event.
MOS adVqmThresholdLqmosNotice	1.3.6.1.4.1.664.5.53.5.3.3.2	MOSvalue	read-only	Listening Quality MOS threshold value for notice event.
MOS adVqmThresholdLqmosWarning	1.3.6.1.4.1.664.5.53.5.3.3.3	MOSvalue	read-only	Listening Quality MOS threshold value for warning event.
U32 adVqmThresholdOutOfOrderError	1.3.6.1.4.1.664.5.53.5.3.3.12	Unsigned32	read-only	Out of order packet threshold value for error event.
U32 adVqmThresholdOutOfOrderInfo	1.3.6.1.4.1.664.5.53.5.3.3.9	Unsigned32	read-only	Out of order packet threshold value for info event.
U32 adVqmThresholdOutOfOrderNotice	1.3.6.1.4.1.664.5.53.5.3.3.10	Unsigned32	read-only	Out of order packet threshold value for notice event.
U32 adVqmThresholdOutOfOrderWarning	1.3.6.1.4.1.664.5.53.5.3.3.11	Unsigned32	read-only	Out of order packet threshold value for warning event.
MOS adVqmThresholdPqmosError	1.3.6.1.4.1.664.5.53.5.3.3.8	MOSvalue	read-only	Normalized PESQ MOS threshold value for error event.
MOS adVqmThresholdPqmosInfo	1.3.6.1.4.1.664.5.53.5.3.3.5	MOSvalue	read-only	Normalized PESQ MOS threshold value for info event.
MOS adVqmThresholdPqmosNotice	1.3.6.1.4.1.664.5.53.5.3.3.6	MOSvalue	read-only	Normalized PESQ MOS threshold value for notice event.
MOS adVqmThresholdPqmosWarning	1.3.6.1.4.1.664.5.53.5.3.3.7	MOSvalue	read-only	Normalized PESQ MOS threshold value for warning event.
adVQMTrap	1.3.6.1.4.1.664.5.53.5.3.0
INT adVqmTrapCfgSeverityLevel	1.3.6.1.4.1.664.5.53.5.3.1.2	INTEGER	read-write	This read-write variable indicates the severity level that will generate an adVqmEndOfCallTrap. If traps are enabled, a trap will be generated at the end of a call for all calls that have a numerical severity level equal to or less than the configured severity level.
adVQMTrapControl	1.3.6.1.4.1.664.5.53.5.3.1
BIT adVqmTrapEventType	1.3.6.1.4.1.664.5.53.5.3.1.3	Bits	read-only	This variable indicates the event that generated the most recent trap. The vqmTrapEventType is a bitmap and can represent multiple failures simultaneously. The various bit positions are: BIT EVENT DESCRIPTION 0 LQMos LQ-MOS threshold exceeded 1 PQMos PQ-MOS threshold exceeded 2 Loss Loss threshold exceeded 3 OutOfOrder Out-of-Order threshold exceeded 4 Jitter Jitter threshold exceeded
adVQMTrapGroup	1.3.6.1.4.1.664.5.53.99.10.1.8			The objects necessary to control VQM notification messages.
INT adVqmTrapState	1.3.6.1.4.1.664.5.53.5.3.1.1	INTEGER	read-write	This variable indicates whether the system produces the vqmEndOfCall trap.

RFC description

Monitors Voice Quality Metrics (VQM) including MOS scores and packet loss on ADTRAN AOS platforms.

Start monitoring ADTRAN NetVanta/SDG-series AOS devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ADTRAN-AOS-VQM

What Is ADTRAN-AOS-VQM?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description