ZXR10-PEAKRATE1MIN-MIB

All MIBs › ZXR10-PEAKRATE1MIN-MIB

Category: ZTE ZXR10 Quality of Service

Description: Provides ZTE ZXR10 one-minute peak traffic rate measurements per interface for bandwidth utilization tracking.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-PEAKRATE1MIN-MIB?

ZXR10-PEAKRATE1MIN-MIB is a ZTE Corporation proprietary MIB (ZXR10/ZXROS platform family) implementing 1-minute peak-rate traffic statistics on managed Ethernet switches on ZTE ZXR10 carrier routers/switches. Its objects cover a per-port table (enable flag, and for each of inbound/outbound unicast/multicast/broadcast/error traffic, the peak packet count and the time it occurred) plus a clear-peak-packets action. As a configuration/status MIB it lets an administrator audit and monitor 1-minute peak-rate traffic statistics on managed Ethernet switches on a ZXR10 platform. It is deployed on ZTE ZXR10 carrier routers/switches. Engineers can download the ZXR10-PEAKRATE1MIN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-PEAKRATE1MIN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 carrier routers/switches

Monitoring Examples

An administrator reviews this MIB's objects to confirm 1-minute peak-rate traffic statistics on managed Ethernet switches is configured and operating as expected on a ZTE ZXR10 platform.

What Can Be Monitored

1-minute peak-rate traffic statistics on managed Ethernet switches

Imported Objects

From RFC1155-SMI

TimeTicks

From SNMPv2-SMI

Counter64
Integer32
OBJECT-TYPE
enterprises

How to Use in IPNetwork Monitor

Example using portInUnicastPktsPeak OID:

Select a ZTE ZXR10 carrier routers/switch (1-minute per-port peak-traffic-rate status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type portInUnicastPktsPeak into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The unicast packet peak rate of the port IN direction in ppm(packets per minute). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the value climbs close to a level you consider a practical ceiling for this device, since a rising peak often signals sustained load growth worth planning capacity around. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT portClearPeakPkts	1.3.6.1.4.1.3902.3.102.31.1.1.19	INTEGER	read-write	Clear peak statistics of the whole ports which are enable.
INT portIfOutIndex	1.3.6.1.4.1.3902.3.102.31.1.1.1	INTEGER	read-only	A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
C64 portInBroadcastPktsPeak	1.3.6.1.4.1.3902.3.102.31.1.1.7	Counter64	read-only	The broadcast packet peak rate of the port IN direction in ppm(packets per minute).
OCT portInBroadcastTime	1.3.6.1.4.1.3902.3.102.31.1.1.8	OCTET STRING	read-only	The broadcast packet peak rate time(YYYYMMDD-hh:mm:ss,such as 20090622-09:30:20) of the port IN direction.
C64 portInMulticastPktsPeak	1.3.6.1.4.1.3902.3.102.31.1.1.5	Counter64	read-only	The multicast packet peak rate of the port IN direction in ppm(packets per minute).
OCT portInMulticastTime	1.3.6.1.4.1.3902.3.102.31.1.1.6	OCTET STRING	read-only	The multicast packet peak rate time(YYYYMMDD-hh:mm:ss,such as 20090622-09:30:20) of the port IN direction .
C64 portInTotalErrPktsPeak	1.3.6.1.4.1.3902.3.102.31.1.1.9	Counter64	read-only	The total error packet peak rate of the port IN direction in ppm(packets per minute).
OCT portInTotalErrTime	1.3.6.1.4.1.3902.3.102.31.1.1.10	OCTET STRING	read-only	The total error packet peak rate time(YYYYMMDD-hh:mm:ss,such as 20090622-09:30:20) of the port IN direction .
C64 portInUnicastPktsPeakEx	1.3.6.1.4.1.3902.3.102.31.1.1.3	Counter64	read-only	The unicast packet peak rate of the port IN direction in ppm(packets per minute).
OCT portInUnicastTime	1.3.6.1.4.1.3902.3.102.31.1.1.4	OCTET STRING	read-only	The unicast packet peak rate time(YYYYMMDD-hh:mm:ss,such as 20090622-09:30:20) of the port IN direction.
C64 portOutBroadcastPktsPeak	1.3.6.1.4.1.3902.3.102.31.1.1.15	Counter64	read-only	The broadcast packet peak rate of the port OUT direction in ppm(packets per minute).
OCT portOutBroadcastTime	1.3.6.1.4.1.3902.3.102.31.1.1.16	OCTET STRING	read-only	The broadcast packet peak rate time(YYYYMMDD-hh:mm:ss,such as 20090622-09:30:20) of the port OUT direction.
C64 portOutMulticastPktsPeak	1.3.6.1.4.1.3902.3.102.31.1.1.13	Counter64	read-only	The multicast packet peak rate of the port OUT direction in ppm(packets per minute).
OCT portOutMulticastTime	1.3.6.1.4.1.3902.3.102.31.1.1.14	OCTET STRING	read-only	The multicast packet peak rate time(YYYYMMDD-hh:mm:ss,such as 20090622-09:30:20) of the port OUT direction.
C64 portOutTotalErrPktsPeak	1.3.6.1.4.1.3902.3.102.31.1.1.17	Counter64	read-only	The total error packet peak rate of the port OUT direction in ppm(packets per minute).
OCT portOutTotalErrTime	1.3.6.1.4.1.3902.3.102.31.1.1.18	OCTET STRING	read-only	The total error packet peak rate time(YYYYMMDD-hh:mm:ss,such as 20090622-09:30:20) of the port OUT direction.
C64 portOutUnicastPktsPeak	1.3.6.1.4.1.3902.3.102.31.1.1.11	Counter64	read-only	The unicast packet peak rate of the port OUT direction in ppm(packets per minute).
OCT portOutUnicastTime	1.3.6.1.4.1.3902.3.102.31.1.1.12	OCTET STRING	read-only	The unicast packet peak rate time(YYYYMMDD-hh:mm:ss,such as 20090622-09:30:20) of the port OUT direction.
INT portPeakrateEnable	1.3.6.1.4.1.3902.3.102.31.1.1.2	INTEGER	read-write	The state of the port`s peak rate statistic function.
portPeakrateEntry	1.3.6.1.4.1.3902.3.102.31.1.1		not-accessible	A set of objects that display the statistics information of the port.
portPeakrateTable	1.3.6.1.4.1.3902.3.102.31.1		not-accessible	A table of objects that display the 1min peak rate statistics information. This group will be implemented in managed Ethernet switches devices.
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10Peakrate1Min	1.3.6.1.4.1.3902.3.102.31
zxr10switch	1.3.6.1.4.1.3902.3.102

RFC description

Tracks 1-minute peak rate statistics for port traffic including unicast, multicast and broadcast packets on ZTE switches.

Start monitoring ZTE ZXR10 carrier routers/switches (1-minute per-port peak-traffic-rate status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-PEAKRATE1MIN-MIB