ZXR10-SWITCHQOS-MIB

All MIBs › ZXR10-SWITCHQOS-MIB

Category: ZTE ZXR10 Quality of Service

Description: Defines ZTE ZXR10 switch QoS configuration for Layer 2 traffic classification, marking, and queue scheduling.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-SWITCHQOS-MIB?

This is a ZTE ZXR10 series switch MIB for configuring Layer 2 quality-of-service behavior, covering traffic classification, packet marking, and queue scheduling. Its exposed data centers on configuration objects, exemplified by an ACL/QoS priority-marking table that lets administrators define how matched traffic flows are remarked and queued. While primarily a configuration MIB rather than a live performance-counter MIB, it supports monitoring of the applied QoS policy state on each port, useful for confirming software-level QoS enforcement is behaving as configured. The module's bundled textual-convention description (an IPv6 address encoding) suggests it imports address/type definitions from standard SNMPv2/INET-ADDRESS-MIB conventions, indicating a dependency on those IETF standards. It is deployed on ZTE ZXR10 switches in enterprise or carrier LAN environments where QoS marking and queueing must be verified per interface, and a ZXR10-SWITCHQOS-MIB download is the usual way to confirm that per-port QoS policy verification.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-SWITCHQOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 series switches

Monitoring Examples

An administrator would poll zxr10AclQosPriorityMarkTable to see which ACL rules are mapped to which QoS priority markings on a given switch port, verifying that voice/video traffic is being remarked to the expected priority. An unexpected or missing entry in this table for a port would reveal a QoS misconfiguration, such as traffic failing to receive the intended priority treatment during congestion.

What Can Be Monitored

ACL-based QoS priority marking assignments
per-port QoS classification configuration

Imported Objects

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
STR zxr10AclQosPriorityMarkAclName	1.3.6.1.4.1.3902.3.102.3.1.1.3	DisplayString	read-only	The acl qos priority mark acl-name.
INT zxr10AclQosPriorityMarkAclNo	1.3.6.1.4.1.3902.3.102.3.1.1.1	INTEGER	read-only	The acl qos priority mark acl-number.
INT zxr10AclQosPriorityMarkCosValue	1.3.6.1.4.1.3902.3.102.3.1.1.5	INTEGER	read-create	The acl qos priority mark cos value, the valid value is 0-7
TRA zxr10AclQosPriorityMarkDropPrecedence	1.3.6.1.4.1.3902.3.102.3.1.1.7	TrafficDropPriority	read-create	THe acl qos priority mark dorp precedence value, the valid value is high(2), low(0), medium(1)
INT zxr10AclQosPriorityMarkDscpValue	1.3.6.1.4.1.3902.3.102.3.1.1.4	INTEGER	read-create	The acl qos priority mark dscp value, the valid value is 0-63
zxr10AclQosPriorityMarkEntry	1.3.6.1.4.1.3902.3.102.3.1.1		not-accessible	A acl qos Priority Mark entry containing objects that acl qos Priority Mark infomation,such as: dscp-value, dorp precedence etc.
INT zxr10AclQosPriorityMarkLocalPrecedence	1.3.6.1.4.1.3902.3.102.3.1.1.6	INTEGER	read-create	The acl qos priority mark local precedence value,the valid value is 0-7
INT zxr10AclQosPriorityMarkOuterVlanId	1.3.6.1.4.1.3902.3.102.3.1.1.8	INTEGER	read-create	The acl qos Priority Mark outer vlan id, the valid value is 1-4094.not support by 59 program
INT zxr10AclQosPriorityMarkPrecedenceValue	1.3.6.1.4.1.3902.3.102.3.1.1.9	INTEGER	read-create	The acl qos priority mark precedence value,the valid value is 0-7
ROW zxr10AclQosPriorityMarkRowStatus	1.3.6.1.4.1.3902.3.102.3.1.1.10	RowStatus	read-create	The acl qos Priority Mark item row status. if it is in valid status, it only can change to invalid status, no other status.when you creat something, you should enter creatAndGo(4), and when you want to delete it, you should enter destroy(6).
INT zxr10AclQosPriorityMarkRuleId	1.3.6.1.4.1.3902.3.102.3.1.1.2	INTEGER	read-only	The acl qos priority mark rule-id.
zxr10AclQosPriorityMarkTable	1.3.6.1.4.1.3902.3.102.3.1		not-accessible	The description of zxr10 acl qos priority mark configuration. It is a list of acl qos priority mark entries.
STR zxr10AclQosRedirectAclName	1.3.6.1.4.1.3902.3.102.3.4.1.3	DisplayString	read-only	The acl qos redirect acl name
INT zxr10AclQosRedirectAclNo	1.3.6.1.4.1.3902.3.102.3.4.1.1	INTEGER	read-only	The acl qos redirect acl number
zxr10AclQosRedirectEntry	1.3.6.1.4.1.3902.3.102.3.4.1		not-accessible	A acl qos redirect entry containing objects that acl qos redirect infomation,such as: globar port name, next-hop ip address, ip address priority etc.
RED zxr10AclQosRedirectFlag	1.3.6.1.4.1.3902.3.102.3.4.1.4	RedirectFlag	read-create	The acl qos redirect flag,cpu 1, interface 2,next-hop 3, next-hop-ipv6(4)
STR zxr10AclQosRedirectGPort	1.3.6.1.4.1.3902.3.102.3.4.1.5	DisplayString	read-create	The acl qos redirect interface name
GRE zxr10AclQosRedirectGreenOnly	1.3.6.1.4.1.3902.3.102.3.4.1.23	GreenOnlyType	read-create	The Redirect action only to green packet, support by 59 device.
IP zxr10AclQosRedirectIpAddr1	1.3.6.1.4.1.3902.3.102.3.4.1.6	IpAddress	read-create	The first redirect next-hop ip adderss
IP zxr10AclQosRedirectIpAddr2	1.3.6.1.4.1.3902.3.102.3.4.1.8	IpAddress	read-create	The second redirect next-hop ip adderss
IP zxr10AclQosRedirectIpAddr3	1.3.6.1.4.1.3902.3.102.3.4.1.10	IpAddress	read-create	The third redirect next-hop ip adderss
IP zxr10AclQosRedirectIpAddr4	1.3.6.1.4.1.3902.3.102.3.4.1.12	IpAddress	read-create	The fourth redirect next-hop ip adderss
IP zxr10AclQosRedirectIpAddr5	1.3.6.1.4.1.3902.3.102.3.4.1.14	IpAddress	read-create	The fifth redirect next-hop ip adderss
IP zxr10AclQosRedirectIpAddr6	1.3.6.1.4.1.3902.3.102.3.4.1.16	IpAddress	read-create	The sixth redirect next-hop ip adderss
IP zxr10AclQosRedirectIpAddr7	1.3.6.1.4.1.3902.3.102.3.4.1.18	IpAddress	read-create	The seventh redirect next-hop ip adderss
IP zxr10AclQosRedirectIpAddr8	1.3.6.1.4.1.3902.3.102.3.4.1.20	IpAddress	read-create	The eighth redirect next-hop ip adderss
INT zxr10AclQosRedirectIpPri1	1.3.6.1.4.1.3902.3.102.3.4.1.7	INTEGER	read-create	The priority of the firest ip address,0-7
INT zxr10AclQosRedirectIpPri2	1.3.6.1.4.1.3902.3.102.3.4.1.9	INTEGER	read-create	The priority of the second ip address,0-7
INT zxr10AclQosRedirectIpPri3	1.3.6.1.4.1.3902.3.102.3.4.1.11	INTEGER	read-create	The priority of the third ip address,0-7
INT zxr10AclQosRedirectIpPri4	1.3.6.1.4.1.3902.3.102.3.4.1.13	INTEGER	read-create	The priority of the fourth ip address,0-7
INT zxr10AclQosRedirectIpPri5	1.3.6.1.4.1.3902.3.102.3.4.1.15	INTEGER	read-create	The priority of the fifth ip address,0-7
INT zxr10AclQosRedirectIpPri6	1.3.6.1.4.1.3902.3.102.3.4.1.17	INTEGER	read-create	The priority of the sixth ip address,0-7
INT zxr10AclQosRedirectIpPri7	1.3.6.1.4.1.3902.3.102.3.4.1.19	INTEGER	read-create	The priority of the seventh ip address,0-7
INT zxr10AclQosRedirectIpPri8	1.3.6.1.4.1.3902.3.102.3.4.1.21	INTEGER	read-create	The priority of the eighth ip address,0-7
ADR zxr10AclQosRedirectIPv6Addr	1.3.6.1.4.1.3902.3.102.3.4.1.22	InetAddressIPv6	read-create	The Redirect next-hop is IPv6 Address,support by 59 device.
ROW zxr10AclQosRedirectRowStatus	1.3.6.1.4.1.3902.3.102.3.4.1.24	RowStatus	read-create	The acl qos Redirect item row status. if it is in valid status, it only can change to invalid status, no other status.when you creat something, you should enter creatAndGo(4), and when you want to delete it, you should enter destroy(6).
INT zxr10AclQosRedirectRuleId	1.3.6.1.4.1.3902.3.102.3.4.1.2	INTEGER	read-only	The acl qos redirect Ruler id
zxr10AclQosRedirectTable	1.3.6.1.4.1.3902.3.102.3.4		not-accessible	The description of zxr10 acl qos redirect configuration. It is a list of acl qos redirect entries.
STR zxr10AclQosTrafficLimitAclName	1.3.6.1.4.1.3902.3.102.3.2.1.3	DisplayString	read-only	The acl qos traffic limit acl name
INT zxr10AclQosTrafficLimitAclNo	1.3.6.1.4.1.3902.3.102.3.2.1.1	INTEGER	read-only	The acl qos traffic limit acl number
INT zxr10AclQosTrafficLimitCbs	1.3.6.1.4.1.3902.3.102.3.2.1.5	INTEGER	read-create	The acl qos traffic limit cbs value, the valid value is 1-16000.but in 59 program is 4-16000
INT zxr10AclQosTrafficLimitCir	1.3.6.1.4.1.3902.3.102.3.2.1.4	INTEGER	read-create	The acl qos traffic limit cir value, the valid value is 1-32000000 in 89 program.but in 59 program is 64-32000000
TRA zxr10AclQosTrafficLimitDropYellow	1.3.6.1.4.1.3902.3.102.3.2.1.15	TrafficDrop	read-create	The acl qos traffic limit drop yellow, the valid value is drop-yellow(1).
INT zxr10AclQosTrafficLimitEbs	1.3.6.1.4.1.3902.3.102.3.2.1.6	INTEGER	read-create	The acl qos traffic limit ebs value, the valid value is 4-16000.
zxr10AclQosTrafficLimitEntry	1.3.6.1.4.1.3902.3.102.3.2.1		not-accessible	A acl qos traffic limit entry containing objects that acl qos traffic limit infomation,such as: cbs value, ebs value, pir value, traffic limit mode etc.
TRA zxr10AclQosTrafficLimitForwadRed	1.3.6.1.4.1.3902.3.102.3.2.1.14	TrafficForward	read-create	The acl qos traffic forwad red,the valid value is forwad-red(1).
TRA zxr10AclQosTrafficLimitMode	1.3.6.1.4.1.3902.3.102.3.2.1.9	TrafficColorMode	read-create	The acl qos traffic limit work mode, the valid value is blind(0) or aware(1).
INT zxr10AclQosTrafficLimitPbs	1.3.6.1.4.1.3902.3.102.3.2.1.8	INTEGER	read-create	The acl qos traffic limit pbs value, the valid value is 4-16000.
INT zxr10AclQosTrafficLimitPir	1.3.6.1.4.1.3902.3.102.3.2.1.7	INTEGER	read-create	The acl qos traffic limit pir value, the valid value is 64-32000000.
TRA zxr10AclQosTrafficLimitRedDp	1.3.6.1.4.1.3902.3.102.3.2.1.12	TrafficDropPriority	read-create	The acl qos traffic limit red drop, the valid value is high(2), low(0), medium(1).
INT zxr10AclQosTrafficLimitRedDscpValue	1.3.6.1.4.1.3902.3.102.3.2.1.10	INTEGER	read-create	The acl qos traffic limit red dscp value, the valid value is 0-63.
ROW zxr10AclQosTrafficLimitRowStatus	1.3.6.1.4.1.3902.3.102.3.2.1.16	RowStatus	read-create	The acl qos Traffic Limit item row status. if it is in valid status, it only can change to invalid status, no other status.
INT zxr10AclQosTrafficLimitRuleId	1.3.6.1.4.1.3902.3.102.3.2.1.2	INTEGER	read-only	The acl qos traffic limit rule id
zxr10AclQosTrafficLimitTable	1.3.6.1.4.1.3902.3.102.3.2		not-accessible	The description of zxr10 acl qos traffic limit configuration. It is a list of acl qos traffic limit entries.
TRA zxr10AclQosTrafficLimitYelDp	1.3.6.1.4.1.3902.3.102.3.2.1.13	TrafficDropPriority	read-create	The acl qos traffic limit yellow drop,the valid value is high(2), low(0), medium(1).
INT zxr10AclQosTrafficLimitYelDscpValue	1.3.6.1.4.1.3902.3.102.3.2.1.11	INTEGER	read-create	The acl qos traffic limit yellow dscp value, the valid value is 0-63.
STR zxr10AclQosTrafficMirrorAclName	1.3.6.1.4.1.3902.3.102.3.3.1.3	DisplayString	read-only	The acl qos traffic mirror acl name
INT zxr10AclQosTrafficMirrorAclNo	1.3.6.1.4.1.3902.3.102.3.3.1.1	INTEGER	read-only	The acl qos traffic mirror acl number
TRA zxr10AclQosTrafficMirrorAction	1.3.6.1.4.1.3902.3.102.3.3.1.4	TrafficMirrorAction	read-create	The acl qos traffic mirror action,cpu 1, interface 2
zxr10AclQosTrafficMirrorEntry	1.3.6.1.4.1.3902.3.102.3.3.1		not-accessible	A acl qos traffic mirror entry containing objects that acl qos traffic mirror infomation,such as: mirror action, interface name, row status etc.
STR zxr10AclQosTrafficMirrorIfName	1.3.6.1.4.1.3902.3.102.3.3.1.5	DisplayString	read-create	when traffic mirror to interface, this is the interface's name. and this only for 59 program
ROW zxr10AclQosTrafficMirrorRowStatus	1.3.6.1.4.1.3902.3.102.3.3.1.6	RowStatus	read-create	The acl qos Traffic Mirror item row status. if it is in valid status, it only can change to invalid status, no other status.when you creat something, you should enter creatAndGo(4), and when you want to delete it, you should enter destroy(6).
INT zxr10AclQosTrafficMirrorRuleId	1.3.6.1.4.1.3902.3.102.3.3.1.2	INTEGER	read-only	The acl qos traffic mirror ruler id
zxr10AclQosTrafficMirrorTable	1.3.6.1.4.1.3902.3.102.3.3		not-accessible	The description of zxr10 acl qos traffic mirror configuration. It is a list of acl qos traffic mirror entries.
STR zxr10AclQosTrafficStatisticsAclName	1.3.6.1.4.1.3902.3.102.3.5.1.3	DisplayString	read-only	The acl qos traffic Statistics acl name
INT zxr10AclQosTrafficStatisticsAclNo	1.3.6.1.4.1.3902.3.102.3.5.1.1	INTEGER	read-only	The acl qos traffic Statistics acl number
zxr10AclQosTrafficStatisticsEntry	1.3.6.1.4.1.3902.3.102.3.5.1		not-accessible	A acl qos traffic statistics entry containing objects that acl qos traffic statistics infomation,such as: pkt-type, statistics type etc.
PAC zxr10AclQosTrafficStatisticsPkttype	1.3.6.1.4.1.3902.3.102.3.5.1.4	Packettype	read-create	The acl qos traffic Statistics pkt-type,all 0, green 1,red 2,yellow 3
ROW zxr10AclQosTrafficStatisticsRowStatus	1.3.6.1.4.1.3902.3.102.3.5.1.6	RowStatus	read-create	The acl qos Traffic Statistics item row status. if it is in valid status, it only can change to invalid status, no other status.when you creat something, you should enter creatAndGo(4), and when you want to delete it, you should enter destroy(6).
INT zxr10AclQosTrafficStatisticsRuleId	1.3.6.1.4.1.3902.3.102.3.5.1.2	INTEGER	read-only	The acl qos traffic Statistics ruler id
STA zxr10AclQosTrafficStatisticsStatype	1.3.6.1.4.1.3902.3.102.3.5.1.5	Statisticstype	read-create	The acl qos traffic Statistics statistics type :byte 1,packet 0
zxr10AclQosTrafficStatisticsTable	1.3.6.1.4.1.3902.3.102.3.5		not-accessible	The description of zxr10 acl qos traffic statistics configuration. It is a list of acl qos traffic statistics entries.
zxr10switch	1.3.6.1.4.1.3902.3.102
zxr10swqos	1.3.6.1.4.1.3902.3.102.3

RFC description

Manages switch quality-of-service (QoS) parameters including traffic prioritization, color modes, traffic mirrors, and packet handling policies.

Start monitoring ZTE ZXR10 series switches (Layer-2 QoS classification/marking/queue config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-SWITCHQOS-MIB

What Is ZXR10-SWITCHQOS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description