All MIBs › ZXR10-QOS-MIB
Organization: ZXR10 ROS OAM group
Last Updated: 2006-10-10
Category: ZTE ZXR10 Quality of Service
Description: Manages ZTE ZXR10 Quality of Service policies including classification, marking, policing, and queuing parameters.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-QOS-MIB?
ZXR10-QOS-MIB is a vendor-specific MIB from ZTE Corporation, nested under the zxr10protocol enterprise tree (zte/zxr10/zxr10protocol), that manages Quality of Service policy on ZXR10 routers, covering traffic classification, rate limiting, and priority queuing. Its qosInputCirIfTable/qosOutputCirIfTable pair (per-interface committed/peak information rate policing) exposes match criteria (qosInputCirMatchType/MatchValue), configured CIR/PIR and burst sizes, and separate conform/exceed/violate actions and marking values for traffic in each category; qosPriorityQueueCfgTable configures per-interface queue limits for high/medium/normal/low priority levels, while qosPriorityQueueItemTable classifies traffic into those queues by match criteria. This combination of policing and priority-queue configuration lets an operator confirm which traffic classes are being rate-limited or reprioritized and whether policing thresholds are set appropriately for the interface's actual traffic mix. It depends on RFC1213-MIB's ifIndex for interface association and on SNMPv2-SMI/TC for its base types, and it is deployed on ZTE ZXR10-series routers running the ZXROS operating system. Operators of ZXR10 gear can download the ZXR10-QOS-MIB file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10-series routers
Monitoring Examples
An operator polls qosInputCirCir and qosInputCirExceedAction for a given qosInputCirIndex to confirm the configured committed rate and what happens to traffic that exceeds it; if qosInputCirExceedAction is set to drop and legitimate traffic bursts are being lost, the operator knows to raise the CIR or adjust the burst-size parameters for that classification entry.
What Can Be Monitored
- committed/peak information rate policing per interface
- conform/exceed/violate traffic actions and marking
- priority queue configuration and per-level limits
- traffic classification match criteria
- table last-changed timestamps
This MIB depends on
Related MIBs
Imported Objects
From RFC1155-SMI
| Gauge |
From RFC1213-MIB
| ifIndex |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| enterprises |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| qosCARconfig | 1.3.6.1.4.1.3902.3.101.6.7 | |||
| qosCBQconfig | 1.3.6.1.4.1.3902.3.101.6.4 | |||
| ENT qosCbQosActionRowStatus | 1.3.6.1.4.1.3902.3.101.6.4.7.1.3 | EntryStatus | read-create | The qos cbwfq action row status. |
| qosCbQosbandwidthCfgTable | 1.3.6.1.4.1.3902.3.101.6.4.7 | not-accessible | This table specifies policy-class bandwidth configuration information | |
| qosCbQosbindwidthCfgEntry | 1.3.6.1.4.1.3902.3.101.6.4.7.1 | not-accessible | Each entry in this table describes configuration information about a policy-map bandwidth. | |
| qosCbQosClassMapCfgEntry | 1.3.6.1.4.1.3902.3.101.6.4.3.1 | not-accessible | Each entry in this table describes configuration information about a classmap | |
| qosCbQosClassMapCfgTable | 1.3.6.1.4.1.3902.3.101.6.4.3 | not-accessible | This table specifies ClassMap configuration information | |
| STR qoscbQosClassMapDescription | 1.3.6.1.4.1.3902.3.101.6.4.3.1.4 | DisplayString | read-create | Description of the Classmap. |
| STR qosCbQosClassMapName | 1.3.6.1.4.1.3902.3.101.6.4.3.1.2 | DisplayString | read-create | Name of the Classmap. |
| ENT qosCbQosClassMapRowStatus | 1.3.6.1.4.1.3902.3.101.6.4.3.1.3 | EntryStatus | read-create | The classMap row status. |
| INT qoscbQosCMapIndex | 1.3.6.1.4.1.3902.3.101.6.4.3.1.1 | INTEGER | read-only | An index assigned by system for each class map |
| qosCbQosCMAPMatchCfgEntry | 1.3.6.1.4.1.3902.3.101.6.4.4.1 | not-accessible | Each entry in this table describes configuration information about a Match Statement | |
| qosCbQosCMAPMatchCfgTable | 1.3.6.1.4.1.3902.3.101.6.4.4 | not-accessible | This table specifies ClassMap configuration information | |
| INT qosCbQosCMAPMatchIndex | 1.3.6.1.4.1.3902.3.101.6.4.4.1.1 | INTEGER | read-create | An index assigned by system for each Match Statement |
| ENT qosCbQosCMAPMatchRowStatus | 1.3.6.1.4.1.3902.3.101.6.4.4.1.4 | EntryStatus | read-create | The qos classMap match statment row status |
| QOS qosCbQosCMAPMatchType | 1.3.6.1.4.1.3902.3.101.6.4.4.1.2 | QosCMAPMatchType | read-create | Name of the Match Statement |
| STR qosCbQosCMAPMatchValue | 1.3.6.1.4.1.3902.3.101.6.4.4.1.3 | DisplayString | read-create | Name of the Match Statement |
| INT qoscbQosPMapIndex | 1.3.6.1.4.1.3902.3.101.6.4.2.1.1 | INTEGER | read-only | An index assigned by system for each policy map. |
| INT qosCbQosPoliceCfgBurstSize | 1.3.6.1.4.1.3902.3.101.6.4.8.1.2 | INTEGER | read-create | The burst size ,in bytes,of a traffic. |
| INT qosCbQosPoliceCfgCir | 1.3.6.1.4.1.3902.3.101.6.4.8.1.1 | INTEGER | read-create | The committed policing cir. This is the sustained rate permitted by policing. |
| QOS qosCbQosPoliceCfgConformAction | 1.3.6.1.4.1.3902.3.101.6.4.8.1.5 | QosCBQCarAction | read-create | Action to be taken when the traffic is within the configured rate, that is, the traffic rate is conforming. |
| GAU qosCbQosPoliceCfgConformSetValue | 1.3.6.1.4.1.3902.3.101.6.4.8.1.6 | Gauge | read-create | New packet attribute values for each packets that conforms to the configured Police rate. |
| qosCbQosPoliceCfgEntry | 1.3.6.1.4.1.3902.3.101.6.4.8.1 | not-accessible | Each entry in this table describes configuration information about a Police Action. The table holds Policy configuration parameters, such as rate, burst size, and actions based on traffic rates | |
| QOS qosCbQosPoliceCfgExceedAction | 1.3.6.1.4.1.3902.3.101.6.4.8.1.7 | QosCBQCarAction | read-create | Action to be taken when the traffic is exceeds the configured rate, that is, the traffic rate is non-conforming. |
| GAU qosCbQosPoliceCfgExceedSetValue | 1.3.6.1.4.1.3902.3.101.6.4.8.1.8 | Gauge | read-create | New packet attribute values for each packets that conforms to the configured Police rate. |
| INT qosCbQosPoliceCfgExtBurstSize | 1.3.6.1.4.1.3902.3.101.6.4.8.1.4 | INTEGER | read-create | The Max burst size ,in bytes,of a traffic. |
| INT qosCbQosPoliceCfgPir | 1.3.6.1.4.1.3902.3.101.6.4.8.1.3 | INTEGER | read-create | The committed policing cir. This is the peek rate permitted by policing. |
| ENT qosCbQosPoliceCfgRowStatus | 1.3.6.1.4.1.3902.3.101.6.4.8.1.11 | EntryStatus | read-create | The row status qos cbwfq police configration. |
| qosCbQosPoliceCfgTable | 1.3.6.1.4.1.3902.3.101.6.4.8 | not-accessible | This table specifies Police Action configuration information. | |
| QOS qosCbQosPoliceCfgViolateAction | 1.3.6.1.4.1.3902.3.101.6.4.8.1.9 | QosCBQCarAction | read-create | Action to be taken when the traffic is exceeds the peek rate, that is, the traffic rate is non-conforming. |
| GAU qosCbQosPoliceCfgViolateSetValue | 1.3.6.1.4.1.3902.3.101.6.4.8.1.10 | Gauge | read-create | New packet attribute values for each packets that conforms to the peek Police rate. |
| qosCbQosPolicyClassCfgEntry | 1.3.6.1.4.1.3902.3.101.6.4.5.1 | not-accessible | Each entry in this table describes a policy class | |
| qosCbQosPolicyClassCfgTable | 1.3.6.1.4.1.3902.3.101.6.4.5 | not-accessible | This table specifies policy class information | |
| STR qosCbQosPolicyClassName | 1.3.6.1.4.1.3902.3.101.6.4.5.1.1 | DisplayString | read-create | Name of the policy class. |
| ENT qosCbQosPolicyClassRowStatus | 1.3.6.1.4.1.3902.3.101.6.4.5.1.2 | EntryStatus | read-create | The policy class row status. |
| TRA qosCbQosPolicyDirection | 1.3.6.1.4.1.3902.3.101.6.4.1.1.2 | TrafficDirection | read-create | This indicates the direction of traffic for which this service policy is applied |
| STR qosCbQosPolicyifname | 1.3.6.1.4.1.3902.3.101.6.4.1.1.1 | DisplayString | read-only | The name of the interface which the service policy attached |
| qosCbQosPolicyMapCfgEntry | 1.3.6.1.4.1.3902.3.101.6.4.2.1 | not-accessible | Each entry in this table describes configuration information about a policymap. | |
| qosCbQosPolicyMapCfgTable | 1.3.6.1.4.1.3902.3.101.6.4.2 | not-accessible | This table specifies Policymap configuration information | |
| STR qoscbQosPolicyMapDescription | 1.3.6.1.4.1.3902.3.101.6.4.2.1.4 | DisplayString | read-create | Description of the policymap. |
| STR qoscbQosPolicyMapName | 1.3.6.1.4.1.3902.3.101.6.4.2.1.2 | DisplayString | read-create | Name of the policymap. |
| ENT qosCbQosPolicyMapRowStatus | 1.3.6.1.4.1.3902.3.101.6.4.2.1.3 | EntryStatus | read-create | The policymap row status. |
| qosCbQosqueueCfgEntry | 1.3.6.1.4.1.3902.3.101.6.4.6.1 | not-accessible | Each entry in this table describes configuration information about a policy-map queue. | |
| qosCbQosqueueCfgTable | 1.3.6.1.4.1.3902.3.101.6.4.6 | not-accessible | This table specifies policy-class queue configuration information | |
| INT qosCbQosQueueingCfgBandwidth | 1.3.6.1.4.1.3902.3.101.6.4.7.1.1 | INTEGER | read-create | The configured bandwidth allocated to this traffic class. |
| QUE qosCbQosQueueingCfgBandwidthUnits | 1.3.6.1.4.1.3902.3.101.6.4.7.1.2 | QueueingBandwidthUnits | read-create | Units of the accompanying bandwidth parameter |
| QOS qosCbQosQueueingCfgPriorityQueueNo | 1.3.6.1.4.1.3902.3.101.6.4.6.1.1 | QosPQQueueType | read-create | If the traffic is specified to LLQ,the value is the queue number, else is NULL |
| ENT qosCbQosqueueRowStatus | 1.3.6.1.4.1.3902.3.101.6.4.6.1.2 | EntryStatus | read-create | The qos cbwfq action row status. |
| qosCBQosServicePolicyEntry | 1.3.6.1.4.1.3902.3.101.6.4.1.1 | not-accessible | Each entry in this table describes to which a interface a given policymap is attached | |
| STR qosCbQosServicePolicyName | 1.3.6.1.4.1.3902.3.101.6.4.1.1.3 | DisplayString | read-create | Name of the service policy which is attached to the interface. |
| ENT qosCbQosServicePolicyRowStatus | 1.3.6.1.4.1.3902.3.101.6.4.1.1.4 | EntryStatus | read-create | The qos service policy row status. |
| qosCBQosServicePolicyTable | 1.3.6.1.4.1.3902.3.101.6.4.1 | not-accessible | This table describes the interface and the policymap that are attached to it | |
| qosCQconfig | 1.3.6.1.4.1.3902.3.101.6.3 | |||
| INT qosFreeCirIndex | 1.3.6.1.4.1.3902.3.101.6.7.1 | INTEGER | read-only | The first free cir item index.When a new cir item is created it is used to find a space to save the cir item configration;When deleted its value equals to the index of the cir item deleted, so when a new cir item is created the space can be used again. |
| qosIfTraffStatInfoEntry | 1.3.6.1.4.1.3902.3.101.6.8.1.1 | not-accessible | Display the traffic and the utilization of the interface after rate-limit policy. | |
| qosIfTraffStatInfoTable | 1.3.6.1.4.1.3902.3.101.6.8.1 | not-accessible | Display the traffic and the utilization of the interface after rate-limit policy. It is a list of qos interface car stat entries. | |
| GAU qosInputCirCir | 1.3.6.1.4.1.3902.3.101.6.7.2.1.4 | Gauge | read-create | The qos interface commit rate. |
| QOS qosInputCirConformAction | 1.3.6.1.4.1.3902.3.101.6.7.2.1.8 | QosCirAction | read-create | The qos interface cir confirm action. |
| GAU qosInputCirConformValue | 1.3.6.1.4.1.3902.3.101.6.7.2.1.9 | Gauge | read-create | New packet attribute values for each packets that conforms to the configured commit rate. |
| STR qosInputCirDescription | 1.3.6.1.4.1.3902.3.101.6.7.2.1.15 | DisplayString | read-create | The qos interface cir description. |
| QOS qosInputCirExceedAction | 1.3.6.1.4.1.3902.3.101.6.7.2.1.10 | QosCirAction | read-create | The qos interface cir exceed action. |
| GAU qosInputCirExceedValue | 1.3.6.1.4.1.3902.3.101.6.7.2.1.11 | Gauge | read-create | New packet attribute values for each packets that exceeds to the configured commit rate. |
| qosInputCirIfEntry | 1.3.6.1.4.1.3902.3.101.6.7.2.1 | not-accessible | A qos cir interface entry containing objects that qos cir interface infomation,such as: rate-limit match type, commit rate, burst rate, confirm action etc. | |
| qosInputCirIfTable | 1.3.6.1.4.1.3902.3.101.6.7.2 | not-accessible | The description of zxr10 qos interface input rate-limit configuration. It is a list of qos interface cir entries. | |
| TIK qosInputCirIfTableLastchange | 1.3.6.1.4.1.3902.3.101.6.7.3 | TimeTicks | read-only | The last time of the qos interface input cir table changed. |
| INT qosInputCirIndex | 1.3.6.1.4.1.3902.3.101.6.7.2.1.1 | INTEGER | read-only | The qos interface cir config index. |
| QOS qosInputCirMatchType | 1.3.6.1.4.1.3902.3.101.6.7.2.1.2 | QosCirMatchType | read-create | The qos interface cir match type. |
| STR qosInputCirMatchValue | 1.3.6.1.4.1.3902.3.101.6.7.2.1.3 | DisplayString | read-create | The qos interface cir match value, for localport, it is 0. |
| GAU qosInputCirMaxBurstRate | 1.3.6.1.4.1.3902.3.101.6.7.2.1.7 | Gauge | read-create | The qos interface cir max burst rate. |
| GAU qosInputCirNormalBurstRate | 1.3.6.1.4.1.3902.3.101.6.7.2.1.5 | Gauge | read-create | The qos interface cir normal burst rate. |
| GAU qosInputCirPir | 1.3.6.1.4.1.3902.3.101.6.7.2.1.6 | Gauge | read-create | The qos interface peek rate. |
| ENT qosInputCirRowStatus | 1.3.6.1.4.1.3902.3.101.6.7.2.1.14 | EntryStatus | read-create | The qos interface cir item row status. if it is in valid status, it only can change to invalid status, no other status. |
| QOS qosInputCirViolateAction | 1.3.6.1.4.1.3902.3.101.6.7.2.1.12 | QosCirAction | read-create | The qos interface cir violate action. |
| GAU qosInputCirViolateValue | 1.3.6.1.4.1.3902.3.101.6.7.2.1.13 | Gauge | read-create | New packet attribute values for each packets that exceeds to the configured exceed rate. |
| qosIntfCarStat | 1.3.6.1.4.1.3902.3.101.6.8 | |||
| STR qosIntfInCarDropBytes | 1.3.6.1.4.1.3902.3.101.6.8.1.1.8 | DisplayString | read-only | The drop bytes of the in interface. |
| STR qosIntfInCarDropPackets | 1.3.6.1.4.1.3902.3.101.6.8.1.1.5 | DisplayString | read-only | The drop packets of the in interface. |
| STR qosIntfInCarTotalBytes | 1.3.6.1.4.1.3902.3.101.6.8.1.1.6 | DisplayString | read-only | The total bytes of the in interface. |
| STR qosIntfInCarTotalPackets | 1.3.6.1.4.1.3902.3.101.6.8.1.1.3 | DisplayString | read-only | The total packets of the in interface. |
| STR qosIntfInCarTranBytes | 1.3.6.1.4.1.3902.3.101.6.8.1.1.7 | DisplayString | read-only | The transmit bytes of the in interface. |
| STR qosIntfInCarTranPackets | 1.3.6.1.4.1.3902.3.101.6.8.1.1.4 | DisplayString | read-only | The transmit packets of the in interface. |
| STR qosIntfInUtilization | 1.3.6.1.4.1.3902.3.101.6.8.1.1.2 | DisplayString | read-only | The utilization of the in interface. |
| STR qosIntfName | 1.3.6.1.4.1.3902.3.101.6.8.1.1.1 | DisplayString | read-only | The name of the interface. |
| STR qosIntfOutCarDropBytes | 1.3.6.1.4.1.3902.3.101.6.8.1.1.15 | DisplayString | read-only | The drop bytes of the out interface. |
| STR qosIntfOutCarDropPackets | 1.3.6.1.4.1.3902.3.101.6.8.1.1.12 | DisplayString | read-only | The drop packets of the out interface. |
| STR qosIntfOutCarTotalBytes | 1.3.6.1.4.1.3902.3.101.6.8.1.1.13 | DisplayString | read-only | The total bytes of the out interface. |
| STR qosIntfOutCarTotalPackets | 1.3.6.1.4.1.3902.3.101.6.8.1.1.10 | DisplayString | read-only | The total packets of the out interface. |
| STR qosIntfOutCarTranBytes | 1.3.6.1.4.1.3902.3.101.6.8.1.1.14 | DisplayString | read-only | The transmit bytes of the out interface. |
| STR qosIntfOutCarTranPackets | 1.3.6.1.4.1.3902.3.101.6.8.1.1.11 | DisplayString | read-only | The transmit packets of the out interface. |
| STR qosIntfOutUtilization | 1.3.6.1.4.1.3902.3.101.6.8.1.1.9 | DisplayString | read-only | The utilization of the out interface. |
| INT qosModuleStart | 1.3.6.1.4.1.3902.3.101.6.1 | INTEGER | read-write | This object indicates if the qos module start or not. 1 start,0 not start. |
| GAU qosOutputCirCir | 1.3.6.1.4.1.3902.3.101.6.7.4.1.4 | Gauge | read-create | The qos interface commit rate. |
| QOS qosOutputCirConformAction | 1.3.6.1.4.1.3902.3.101.6.7.4.1.8 | QosCirAction | read-create | The qos interface cir conform action. |
| GAU qosOutputCirConformValue | 1.3.6.1.4.1.3902.3.101.6.7.4.1.9 | Gauge | read-create | New packet attribute values for each packets that conforms to the configured commit rate. |
| STR qosOutputCirDescription | 1.3.6.1.4.1.3902.3.101.6.7.4.1.15 | DisplayString | read-create | The qos interface cir description. |
| QOS qosOutputCirExceedAction | 1.3.6.1.4.1.3902.3.101.6.7.4.1.10 | QosCirAction | read-create | The qos interface cir exceed action. |
| GAU qosOutputCirExceedValue | 1.3.6.1.4.1.3902.3.101.6.7.4.1.11 | Gauge | read-create | New packet attribute values for each packets that exceeds to the configured commit rate. |
| qosOutputCirIfEntry | 1.3.6.1.4.1.3902.3.101.6.7.4.1 | not-accessible | A qos cir interface entry containing objects that qos cir interface infomation,such as: rate-limit match type, commit rate, burst rate, confirm action etc. | |
| qosOutputCirIfTable | 1.3.6.1.4.1.3902.3.101.6.7.4 | not-accessible | The description of zxr10 qos interface output rate-limit configuration. It is a list of qos interface cir entries. | |
| TIK qosOutputCirIfTableLastchange | 1.3.6.1.4.1.3902.3.101.6.7.5 | TimeTicks | read-only | The last time of the qos interface Output cir table changed. |
| INT qosOutputCirIndex | 1.3.6.1.4.1.3902.3.101.6.7.4.1.1 | INTEGER | read-only | The qos interface cir config index. |
| QOS qosOutputCirMatchType | 1.3.6.1.4.1.3902.3.101.6.7.4.1.2 | QosCirMatchType | read-create | The qos interface cir match type. |
| STR qosOutputCirMatchValue | 1.3.6.1.4.1.3902.3.101.6.7.4.1.3 | DisplayString | read-create | The qos interface cir match value, for localport, it is 0. |
| GAU qosOutputCirMaxBurstRate | 1.3.6.1.4.1.3902.3.101.6.7.4.1.7 | Gauge | read-create | The qos interface cir max burst rate, it must not be lower than normal burst rate. |
| GAU qosOutputCirNormalBurstRate | 1.3.6.1.4.1.3902.3.101.6.7.4.1.5 | Gauge | read-create | The qos interface cir normal burst rate. |
| GAU qosOutputCirPir | 1.3.6.1.4.1.3902.3.101.6.7.4.1.6 | Gauge | read-create | The qos interface peek rate. |
| ENT qosOutputCirRowStatus | 1.3.6.1.4.1.3902.3.101.6.7.4.1.14 | EntryStatus | read-create | The qos interface cir item row status. if it is in valid status, it only can change to invalid status, no other status. |
| QOS qosOutputCirViolateAction | 1.3.6.1.4.1.3902.3.101.6.7.4.1.12 | QosCirAction | read-create | The qos interface cir exceed action. |
| GAU qosOutputCirViolateValue | 1.3.6.1.4.1.3902.3.101.6.7.4.1.13 | Gauge | read-create | New packet attribute values for each packets that exceeds to the configured commit rate. |
| qosPQconfig | 1.3.6.1.4.1.3902.3.101.6.2 | |||
| qosPriorityGroupEntry | 1.3.6.1.4.1.3902.3.101.6.2.4.1 | not-accessible | Each entry in this table describes to which a interface a given PriorityQueue is attached | |
| STR qosPriorityGroupifname | 1.3.6.1.4.1.3902.3.101.6.2.4.1.1 | DisplayString | read-only | The name of the interface which the priority queue attached. |
| INT qosPriorityGroupNum | 1.3.6.1.4.1.3902.3.101.6.2.4.1.2 | INTEGER | read-create | The Num of the priority-group which is attached to the interface |
| ENT qosPriorityGroupRowStatus | 1.3.6.1.4.1.3902.3.101.6.2.4.1.3 | EntryStatus | read-create | The row status of the priority group attached to the interface |
| qosPriorityGroupTable | 1.3.6.1.4.1.3902.3.101.6.2.4 | not-accessible | This table describes the interface and the PriorityQueue that are attached to it | |
| qosPriorityQueueCfgEntry | 1.3.6.1.4.1.3902.3.101.6.2.1.1 | not-accessible | A qos priority queue entry containing objects that qos priority queue configuration,such as: queue item num, queue limit etc. | |
| qosPriorityQueueCfgTable | 1.3.6.1.4.1.3902.3.101.6.2.1 | not-accessible | The description of zxr10 qos priority queue configuration. It is a list of qos priority queue entries. | |
| TIK qosPriorityQueueCfgTableLastchange | 1.3.6.1.4.1.3902.3.101.6.2.2 | TimeTicks | read-only | The last time of the qos priority queue table changed. |
| QOS qosPriorityQueueDefault | 1.3.6.1.4.1.3902.3.101.6.2.1.1.3 | QosPQQueueType | read-write | The qos priority default queue number. |
| INT qosPriorityQueueIndex | 1.3.6.1.4.1.3902.3.101.6.2.1.1.1 | INTEGER | read-only | The qos priority queue index. |
| STR qosPriorityQueueItemDescription | 1.3.6.1.4.1.3902.3.101.6.2.3.1.6 | DisplayString | read-create | The qos priority description. |
| qosPriorityQueueItemEntry | 1.3.6.1.4.1.3902.3.101.6.2.3.1 | not-accessible | A qos priority queue entry containing objects that qos priority queue configuration,such as: set type, queue num, default queue limit etc. | |
| INT qosPriorityQueueItemIndex | 1.3.6.1.4.1.3902.3.101.6.2.3.1.1 | INTEGER | read-only | The qos priority queue item index. |
| QOS qosPriorityQueueItemMatchType | 1.3.6.1.4.1.3902.3.101.6.2.3.1.2 | QosPQMatchType | read-create | The qos priority queue match type such as mpls-exp,interface etc. |
| STR qosPriorityQueueItemMatchValue | 1.3.6.1.4.1.3902.3.101.6.2.3.1.3 | DisplayString | read-create | The qos priority queue match value. |
| QOS qosPriorityQueueItemQueueNum | 1.3.6.1.4.1.3902.3.101.6.2.3.1.4 | QosPQQueueType | read-create | The qos priority queue num. |
| ENT qosPriorityQueueItemRowStatus | 1.3.6.1.4.1.3902.3.101.6.2.3.1.5 | EntryStatus | read-create | The qos priority queue item row status. |
| qosPriorityQueueItemTable | 1.3.6.1.4.1.3902.3.101.6.2.3 | not-accessible | The description of zxr10 qos priority queue configuration. It is a list of qos priority queue entries. | |
| INT qosPriorityQueueItemTotal | 1.3.6.1.4.1.3902.3.101.6.2.1.1.2 | INTEGER | read-only | The configurated qos priority queue item total,the max number is 255. |
| INT qosPriorityQueueLimitHigh | 1.3.6.1.4.1.3902.3.101.6.2.1.1.4 | INTEGER | read-write | The qos priority queue limit high value. |
| INT qosPriorityQueueLimitLow | 1.3.6.1.4.1.3902.3.101.6.2.1.1.7 | INTEGER | read-write | The qos priority queue limit low value. |
| INT qosPriorityQueueLimitMedium | 1.3.6.1.4.1.3902.3.101.6.2.1.1.5 | INTEGER | read-write | The qos priority queue limit medium value. |
| INT qosPriorityQueueLimitNormal | 1.3.6.1.4.1.3902.3.101.6.2.1.1.6 | INTEGER | read-write | The qos priority queue limit normal value. |
| ENT qosPriorityQueueRowStatus | 1.3.6.1.4.1.3902.3.101.6.2.1.1.8 | EntryStatus | read-write | The qos priority queue status. |
| ENT qosREDCfgprecedenceRowStatus | 1.3.6.1.4.1.3902.3.101.6.5.1.1.5 | EntryStatus | read-create | The row status of qos wred configration. |
| INT qosREDCfgPreValue | 1.3.6.1.4.1.3902.3.101.6.5.1.1.1 | INTEGER | read-create | The IP precedence of this entry. |
| ENT qosREDCfgweightRowStatus | 1.3.6.1.4.1.3902.3.101.6.5.2.1.2 | EntryStatus | read-create | The row status of qos wred weight configration. |
| INT qosREDCfgweightValue | 1.3.6.1.4.1.3902.3.101.6.5.2.1.1 | INTEGER | read-create | The decay factor for the queue average calculation. The decay factor is equal to raising 2 to the power of N, where N could be up to 16. The smaller the number, the faster it decays. |
| INT qosREDprecedenceCfgMaxThreshold | 1.3.6.1.4.1.3902.3.101.6.5.1.1.3 | INTEGER | read-create | Maximum threshold in number of packets. When the average queue length exceeds this number, WRED drops all packets with the specified IP precedence. |
| INT qosREDprecedenceCfgMinThreshold | 1.3.6.1.4.1.3902.3.101.6.5.1.1.2 | INTEGER | read-create | Minimum threshold in number of packets. When the average queue length reaches this number, WRED begins to drop packets with the specified IP precedence. |
| INT qosREDprecedenceCfgPktDropProb | 1.3.6.1.4.1.3902.3.101.6.5.1.1.4 | INTEGER | read-create | Denominator for the fraction of packets dropped when the average queue depth is MaxDepthThreshold. For example, if the denominator is 10, one out of every 10 packets is dropped when the average queue is at the MaxDepthThreshold. |
| qosWFQCfgEntry | 1.3.6.1.4.1.3902.3.101.6.6.1.1 | not-accessible | Each entry in this table describes configuration information about a wfq policy. | |
| INT qosWFQCfgQueueLimit | 1.3.6.1.4.1.3902.3.101.6.6.1.1.2 | INTEGER | read-create | The discard threshold for each queue. |
| ENT qosWFQCfgRowStatus | 1.3.6.1.4.1.3902.3.101.6.6.1.1.3 | EntryStatus | read-create | The row status of qos wfq configration. |
| qosWFQCfgTable | 1.3.6.1.4.1.3902.3.101.6.6.1 | not-accessible | This table specifies WFQ configuration information. | |
| INT qosWFQCfgTotalQueueNum | 1.3.6.1.4.1.3902.3.101.6.6.1.1.1 | INTEGER | read-create | Total queue number used for wfq in the interface. |
| qosWFQconfig | 1.3.6.1.4.1.3902.3.101.6.6 | |||
| qosWREDconfig | 1.3.6.1.4.1.3902.3.101.6.5 | |||
| qosWREDprecedenceCfgEntry | 1.3.6.1.4.1.3902.3.101.6.5.1.1 | not-accessible | Each entry in this table describes configuration information about a wred policy. | |
| qosWREDprecedenceCfgTable | 1.3.6.1.4.1.3902.3.101.6.5.1 | not-accessible | This table specifies wred precedence configuration information. | |
| qosWREDweightCfgEntry | 1.3.6.1.4.1.3902.3.101.6.5.2.1 | not-accessible | Each entry in this table describes configuration information about a wred weight policy. | |
| qosWREDweightCfgTable | 1.3.6.1.4.1.3902.3.101.6.5.2 | not-accessible | This table specifies wred weight configuration information. | |
| zte | 1.3.6.1.4.1.3902 | |||
| zxr10 | 1.3.6.1.4.1.3902.3 | |||
| zxr10protocol | 1.3.6.1.4.1.3902.3.101 | |||
| zxr10qos | 1.3.6.1.4.1.3902.3.101.6 | This MIB Module provides Textual Conventions and OBJECT-ID Objects to be used by zxros qos module. |
RFC description
ZTE ZXR10 router QoS (Quality of Service) MIB; provides configuration and management of traffic scheduling algorithms including PQ, CQ, CBQ, WRED, WFQ, and CAR.
Start monitoring ZTE ZXR10-series routers (per-interface CIR/PIR policing, priority-queue config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.