All MIBs › ZXR10-ACL-NEW-MIB › zxr10ACLv4RuleTtlOpr
zxr10ACLv4RuleTtlOpr
Module: ZXR10-ACL-NEW-MIB
OID (symbolic): ZXR10-ACL-NEW-MIB::zxr10ACLv4RuleTtlOpr
OID (numeric): 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.28
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This is an optional node. eq Match only packets on a given ttl value ge Match only packets with a no lower ttl value le Match only packets with a no greater ttl value neq Match only packets with a no equeal ttl value range Match only packet on a given ttl value range 65535 invalid value
Needn't care for zxr10ACLv4RuleTtlValue and zxr10ACLv4RuleTtlRange When the value of zxr10ACLv4RuleTtlOpr is invalid(65535). Check zxr10ACLv4RuleTtlValue when the value zxr10ACLv4RuleTtlOpr is eq(1),ge(2),le(3) or neq(6). Check zxr10ACLv4RuleTtlRange only when the value of zxr10ACLv4RuleTtlOpr is range(7).
What is zxr10ACLv4RuleTtlOpr?
How the TTL is compared in this rule: eq(1) equal, ge(2) this value or higher, le(3) this value or lower, neq(6) not equal, range(7) within a range, invalid(65535) no TTL match. The source's wording (a 'no lower' and 'no equeal' ttl) is clumsy but means these comparisons.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.28 snmpwalk -v2c -c public <target> ZXR10-ACL-NEW-MIB::zxr10ACLv4RuleTtlOpr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.28.1 snmpget -v2c -c public <target> ZXR10-ACL-NEW-MIB::zxr10ACLv4RuleTtlOpr.1
Start monitoring ZTE ZXR10 series routers/switches (enhanced IPv4 ACL rule/permit-deny config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-ACL-NEW-MIB::zxr10ACLv4RuleTtlOpr OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 series routers/switches (enhanced IPv4 ACL rule/permit-deny config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | MR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.602 | zxr10AclNewMIB | ZXR10-ACL-NEW-MIB |
| 1.3.6.1.4.1.3902.3.6000.602.2 | zxr10ACLObjects | ZXR10-ACL-NEW-MIB |
| 1.3.6.1.4.1.3902.3.6000.602.2.1 | zxr10ACLv4Objects | ZXR10-ACL-NEW-MIB |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2 | zxr10ACLv4RuleTable | ZXR10-ACL-NEW-MIB |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1 | zxr10ACLv4RuleEntry | ZXR10-ACL-NEW-MIB |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.28 | zxr10ACLv4RuleTtlOpr | ZXR10-ACL-NEW-MIB |