ZXR10-ACL-NEW-MIB :: zxr10ACLv4MixRuleDestPortOpr

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-ACL-NEW-MIB › zxr10ACLv4MixRuleDestPortOpr

zxr10ACLv4MixRuleDestPortOpr

Module: ZXR10-ACL-NEW-MIB

OID (symbolic): ZXR10-ACL-NEW-MIB::zxr10ACLv4MixRuleDestPortOpr

OID (numeric): 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.23

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value

Needn't care for zxr10ACLv4MixRuleDestPortValue and zxr10ACLv4MixRuleDestPortRange When the value of zxr10ACLv4MixRuleDestPortOpr is invalid(65535). Check zxr10ACLv4MixRuleDestPortValue when the value zxr10ACLv4MixRuleDestPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv4MixRuleDestPortRange only when the value of zxr10ACLv4MixRuleDestPortOpr is range(7).

What is zxr10ACLv4MixRuleDestPortOpr?

How the destination port is compared in this IPv4 mixed ACL rule: eq(1) exact port, ge(2) this port or higher, le(3) this port or lower, range(7) a port range, or oprTypeInvalid(65535) for no port match. It is optional and only meaningful for TCP or UDP rules.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.23
snmpwalk -v2c -c public <target> ZXR10-ACL-NEW-MIB::zxr10ACLv4MixRuleDestPortOpr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.23.1
snmpget -v2c -c public <target> ZXR10-ACL-NEW-MIB::zxr10ACLv4MixRuleDestPortOpr.1

Start monitoring ZTE ZXR10 series routers/switches (enhanced IPv4 ACL rule/permit-deny config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-ACL-NEW-MIB::zxr10ACLv4MixRuleDestPortOpr OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 series routers/switches (enhanced IPv4 ACL rule/permit-deny config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.3zxr10FANS-POWER-MIB
1.3.6.1.4.1.3902.3.6000zxr10RosngMIBMR-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.6000.602zxr10AclNewMIBZXR10-ACL-NEW-MIB
1.3.6.1.4.1.3902.3.6000.602.2zxr10ACLObjectsZXR10-ACL-NEW-MIB
1.3.6.1.4.1.3902.3.6000.602.2.4zxr10ACLv4MixObjectsZXR10-ACL-NEW-MIB
1.3.6.1.4.1.3902.3.6000.602.2.4.2zxr10ACLv4MixRuleTableZXR10-ACL-NEW-MIB
1.3.6.1.4.1.3902.3.6000.602.2.4.2.1zxr10ACLv4MixRuleEntryZXR10-ACL-NEW-MIB
1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.23zxr10ACLv4MixRuleDestPortOprZXR10-ACL-NEW-MIB