All MIBs › ZTE-AN-VLAN-MIB › zxAnVlanIfAcceptableFrameTypes
zxAnVlanIfAcceptableFrameTypes
Module: ZTE-AN-VLAN-MIB
OID (symbolic): ZTE-AN-VLAN-MIB::zxAnVlanIfAcceptableFrameTypes
OID (numeric): 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the DefaultVid for this port.
When admitOnlyVlanUntagged(3), only untagged frames or Priority-Tagged frames received on this port will be accepted for this port.
When admitOnlyVlanSingleTagged(4), only single tagged frames received on this port will be accepted for this port.
When admitOnlyVlanMaxDoubleTagged(5), the device will accept untagged frames or Priority-tagged frames or single tagged frames or double tagged frames received on this port.
When admitOnlyVlanMaxSingleTagged(6), the device will accept untagged frames or Priority-tagged frames or single tagged frames received on this port.
When admitOnlyVlanDoubleTagged(7), only double tagged frames received on this port will be accepted for this port.
This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP.
What is zxAnVlanIfAcceptableFrameTypes?
Controls which combination of untagged, priority-tagged, single-tagged, and double-tagged frames this port will accept -- from admitting everything to only allowing double-tagged Q-in-Q traffic -- letting an admin enforce that a port only carries the frame format expected for its role (e.g. a Q-in-Q uplink rejecting untagged frames).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.10 snmpwalk -v2c -c public <target> ZTE-AN-VLAN-MIB::zxAnVlanIfAcceptableFrameTypes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.10.1 snmpget -v2c -c public <target> ZTE-AN-VLAN-MIB::zxAnVlanIfAcceptableFrameTypes.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.10.1 i <value>
Start monitoring ZTE access-network (PON/DSLAM) equipment (per-port VLAN mode/tagged-membership config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-VLAN-MIB::zxAnVlanIfAcceptableFrameTypes OID value, configure state conditions and alerts, and monitor any ZTE access-network (PON/DSLAM) equipment (per-port VLAN mode/tagged-membership config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.40 | zxAnBridge | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.40.50 | zxAnVlanMib | ZTE-AN-VLAN-MIB |
| 1.3.6.1.4.1.3902.1082.40.50.2 | zxAnVlanObjects | ZTE-AN-VLAN-MIB |
| 1.3.6.1.4.1.3902.1082.40.50.2.1 | zxAnVlanBaseObjects | ZTE-AN-VLAN-MIB |
| 1.3.6.1.4.1.3902.1082.40.50.2.1.4 | zxAnVlanIfConfTable | ZTE-AN-VLAN-MIB |
| 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1 | zxAnVlanIfConfEntry | ZTE-AN-VLAN-MIB |
| 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.10 | zxAnVlanIfAcceptableFrameTypes | ZTE-AN-VLAN-MIB |