All MIBs › ZTE-AN-VLAN-MIB › zxAnVlanCapabilities
zxAnVlanCapabilities
Module: ZTE-AN-VLAN-MIB
OID (symbolic): ZTE-AN-VLAN-MIB::zxAnVlanCapabilities
OID (numeric): 1.3.6.1.4.1.3902.1082.40.50.1.100
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The VLAN capabilities. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means supporting zxAnVlanExtPortListTable and not supporting zxAnVlanPortListTable. bit 1: value 1 means changing zxAnVlanBasedFwdUplinkPort to zxAnVlanBasedFwdOtherIfIndex, supporting zxAnVlanBasedFwdOtherSubIfIndex and modifying MAX-ACCESS of zxAnVlanBasedFwdIfIndex and zxAnVlanBasedFwdSubIfIndex from read-only to read-create. bit 2: value 1 means supporting zxAnVlanIfConfVlanTable and not supporting zxAnVlanIfConfVlanCmdTable, zxAnVlanIfConfUntaggedVlanList, zxAnVlanIfConfTaggedVlanList in zxAnVlanIfConfTable. bit 3: value 1 means supporting zxAnVlanExtPortListIITable and not supporting zxAnVlanExtPortListTable, zxAnVlanPortListTable. bit 4: value 1 means supporting zxAnMcastVlanGlobalTransTable, zxAnMcastVlanIfTransTable in ZTE-AN-MULTICAST-BASE-MIB.mib, and not supporting zxAnMVlanGlobalTransTable, zxAnMVlanIfTransTable in this file. bit 5: value 1 means not supporting zxAnVlanIfAcceptableFrameTypes in zxAnVlanIfConfTable. bit 6: value 1 means supporting zxAnVlanIfExtTransTable and not supporting zxAnVlanIfTransTable. bit 7: value 1 means supporting zxAnVlanIfConfDefaultVid not configured. bit 8: value 1 means supporting zxAnVlanIfExtTransCos and zxAnVlanIfExtTransCtagCos in zxAnVlanIfExtTransTable.
NOTE: No recommended to display it in NMS.
What is zxAnVlanCapabilities?
A read-only bitmask exposing which optional VLAN feature variants this specific hardware/firmware build supports (e.g. the extended port-list table, VLAN-based forwarding with other-interface indices, the newer IfConfVlanTable) -- the vendor's own note says it isn't meant for display in an NMS, but a management application can use it to know which parallel tables and columns are actually active on this device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.40.50.1.100 snmpwalk -v2c -c public <target> ZTE-AN-VLAN-MIB::zxAnVlanCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.40.50.1.100.1 snmpget -v2c -c public <target> ZTE-AN-VLAN-MIB::zxAnVlanCapabilities.1
Start monitoring ZTE access-network (PON/DSLAM) equipment (per-port VLAN mode/tagged-membership config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-VLAN-MIB::zxAnVlanCapabilities OID value, configure state conditions and alerts, and monitor any ZTE access-network (PON/DSLAM) equipment (per-port VLAN mode/tagged-membership config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.40 | zxAnBridge | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.40.50 | zxAnVlanMib | ZTE-AN-VLAN-MIB |
| 1.3.6.1.4.1.3902.1082.40.50.1 | zxAnVlanGlobalObjects | ZTE-AN-VLAN-MIB |
| 1.3.6.1.4.1.3902.1082.40.50.1.100 | zxAnVlanCapabilities | ZTE-AN-VLAN-MIB |