ZTE-AN-QOSACL-PERF-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        OBJECT-GROUP, MODULE-COMPLIANCE
            FROM SNMPv2-CONF
        Integer32, Counter64, OBJECT-TYPE, MODULE-IDENTITY
            FROM SNMPv2-SMI
        TruthValue, RowStatus, DateAndTime
            FROM SNMPv2-TC
        HCPerfTimeElapsed
            FROM HC-PerfHist-TC-MIB
        zxAnAclNumber
            FROM ZTE-AN-ACL-MIB
        zxAnQos
            FROM ZTE-AN-SMI;

    zxAnQosAclPerfMib MODULE-IDENTITY
        LAST-UPDATED  "201812181000Z"
        ORGANIZATION  "ZTE Corporation"
        CONTACT-INFO  "Lu Hanxiong ZTE Corporation
                       Mail: lu.hanxiong@zte.com.cn
                       Tel: +86-021-68895679"
        DESCRIPTION   "The MIB module for the management of the ACL
                       performance."

        REVISION      "201812181000Z"
        DESCRIPTION
            "Initial version of this MIB module."
        ::= { zxAnQos 6 }

--------------------------------------------------------------------------------
-- Following management objects are defined.
-- 1. ACL Module Performance Objects
-- 1.2 ACL Module Current Minutes Performance Table
-- 1.3 ACL Module Current 1 Day Performance Table
-- 1.4 ACL Module History Minutes Performance Table
-- 1.5 ACL Module History 1 Day Performance Table

-- Following conformance information is defined.
-- 2. zxAnQosAclPerfConformances
--------------------------------------------------------------------------------

    zxAnQosAclPerfObjects       OBJECT IDENTIFIER
                                  ::= { zxAnQosAclPerfMib 2 }
    zxAnQosAclPerfConformances  OBJECT IDENTIFIER
                                  ::= { zxAnQosAclPerfMib 4 }

--------------------------------------------------------------------------------
-- 1. ACL Module Performance Objects
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
-- 1.2 ACL Module Current Minutes Performance Table
--------------------------------------------------------------------------------
    zxAnQosAclCurrMinPerfTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF ZxAnQosAclCurrMinPerfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The minutes interval performance data table of the ACL rule."
        ::= { zxAnQosAclPerfObjects 2 }

    zxAnQosAclCurrMinPerfEntry  OBJECT-TYPE
        SYNTAX      ZxAnQosAclCurrMinPerfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The minutes interval performance data entry of the ACL rule."
        INDEX  { zxAnQosAclCMinPerfAclNumber, zxAnQosAclCMinPerfRuleId }
        ::= { zxAnQosAclCurrMinPerfTable 1 }

    ZxAnQosAclCurrMinPerfEntry ::= SEQUENCE {
        zxAnQosAclCMinPerfAclNumber Integer32,
        zxAnQosAclCMinPerfRuleId    Integer32,
        zxAnQosAclCMinTimeElapsed   HCPerfTimeElapsed,
        zxAnQosAclCMinPkts          Counter64,
        zxAnQosAclCMinOcts          Counter64,
        zxAnQosAclCMinReset         INTEGER
        }

    zxAnQosAclCMinPerfAclNumber OBJECT-TYPE
        SYNTAX Integer32 (1..699)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The number of an ACL."
        ::= { zxAnQosAclCurrMinPerfEntry 1 }

    zxAnQosAclCMinPerfRuleId OBJECT-TYPE
        SYNTAX Integer32 (1..2147483644)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ID of a rule."
        ::= { zxAnQosAclCurrMinPerfEntry 2 }

    zxAnQosAclCMinTimeElapsed  OBJECT-TYPE
        SYNTAX      HCPerfTimeElapsed
        UNITS       "Seconds"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of seconds that have elapsed since the beginning of the
             current minutes interval."
        ::= { zxAnQosAclCurrMinPerfEntry 3 }

    zxAnQosAclCMinPkts OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of packets in current minutes interval."
        ::= { zxAnQosAclCurrMinPerfEntry 4 }

    zxAnQosAclCMinOcts OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of octets in current minutes interval."
        ::= { zxAnQosAclCurrMinPerfEntry 5 }

    zxAnQosAclCMinReset OBJECT-TYPE
        SYNTAX  INTEGER {
                perfReset(1)
            }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Clear all the current minutes performance variables.
             When get this variable, always return 1."
        ::= { zxAnQosAclCurrMinPerfEntry 50 }

--------------------------------------------------------------------------------
-- 1.3 ACL Module Current 1 Day Performance Table
--------------------------------------------------------------------------------
    zxAnQosAclCurr1DayPerfTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF ZxAnQosAclCurr1DayPerfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The 1-day interval performance data table of the ACL rule."
        ::= { zxAnQosAclPerfObjects 3 }

    zxAnQosAclCurr1DayPerfEntry  OBJECT-TYPE
        SYNTAX      ZxAnQosAclCurr1DayPerfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The 1-day interval performance data entry of the ACL rule."
        INDEX  { zxAnQosAclC1DPerfAclNumber, zxAnQosAclC1DPerfRuleId }
        ::= { zxAnQosAclCurr1DayPerfTable 1 }

    ZxAnQosAclCurr1DayPerfEntry ::= SEQUENCE {
        zxAnQosAclC1DPerfAclNumber Integer32,
        zxAnQosAclC1DPerfRuleId    Integer32,
        zxAnQosAclC1DTimeElapsed   HCPerfTimeElapsed,
        zxAnQosAclC1DPkts          Counter64,
        zxAnQosAclC1DOcts          Counter64,
        zxAnQosAclC1DReset         INTEGER
        }

    zxAnQosAclC1DPerfAclNumber OBJECT-TYPE
        SYNTAX Integer32 (1..699)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The number of an ACL."
        ::= { zxAnQosAclCurr1DayPerfEntry 1 }

    zxAnQosAclC1DPerfRuleId OBJECT-TYPE
        SYNTAX Integer32 (1..2147483644)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ID of a rule."
        ::= { zxAnQosAclCurr1DayPerfEntry 2 }

    zxAnQosAclC1DTimeElapsed  OBJECT-TYPE
        SYNTAX      HCPerfTimeElapsed
        UNITS       "Seconds"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of seconds that have elapsed since the beginning of the
             current 1-day interval."
        ::= { zxAnQosAclCurr1DayPerfEntry 3 }

    zxAnQosAclC1DPkts OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of packets in current 1-day interval."
        ::= { zxAnQosAclCurr1DayPerfEntry 4 }

    zxAnQosAclC1DOcts OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of octets in current 1-day interval."
        ::= { zxAnQosAclCurr1DayPerfEntry 5 }

    zxAnQosAclC1DReset OBJECT-TYPE
        SYNTAX  INTEGER {
                perfReset(1)
            }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Clear all the current 1-day performance variables.
             When get this variable, always return 1."
        ::= { zxAnQosAclCurr1DayPerfEntry 50 }

--------------------------------------------------------------------------------
-- 1.4 ACL Module History Minutes Performance Table
--------------------------------------------------------------------------------
    zxAnQosAclHisMinPerfTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF ZxAnQosAclHisMinPerfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The minutes interval historical performance data table of the ACL
             rule."
        ::= { zxAnQosAclPerfObjects 4 }

    zxAnQosAclHisMinPerfEntry  OBJECT-TYPE
        SYNTAX      ZxAnQosAclHisMinPerfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The minutes interval historical performance data entry of the ACL
             rule."
        INDEX   { zxAnQosAclHMinPerfAclNumber, zxAnQosAclHMinPerfRuleId,
                  zxAnQosAclHMinIntervalNo }
        ::= { zxAnQosAclHisMinPerfTable 1 }

    ZxAnQosAclHisMinPerfEntry ::= SEQUENCE {
        zxAnQosAclHMinPerfAclNumber     Integer32,
        zxAnQosAclHMinPerfRuleId        Integer32,
        zxAnQosAclHMinIntervalNo        Integer32,
        zxAnQosAclHMinIntervalValidData TruthValue,
        zxAnQosAclHMinDateTime          DateAndTime,
        zxAnQosAclHMinPkts              Counter64,
        zxAnQosAclHMinOcts              Counter64
        }

    zxAnQosAclHMinPerfAclNumber OBJECT-TYPE
        SYNTAX Integer32 (1..699)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The number of an ACL."
        ::= { zxAnQosAclHisMinPerfEntry 1 }

    zxAnQosAclHMinPerfRuleId OBJECT-TYPE
        SYNTAX Integer32 (1..2147483644)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ID of a rule."
        ::= { zxAnQosAclHisMinPerfEntry 2 }

   zxAnQosAclHMinIntervalNo  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
             "The performance data interval number."
        ::= { zxAnQosAclHisMinPerfEntry 3 }

    zxAnQosAclHMinIntervalValidData  OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
             "Performance data valid flag.
              true(1) means valid.
              false(2) means invalid and the performace data is useless."
        ::= { zxAnQosAclHisMinPerfEntry 4 }

    zxAnQosAclHMinDateTime  OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
             "The minutes interval performance data generation time."
        ::= { zxAnQosAclHisMinPerfEntry 5 }

    zxAnQosAclHMinPkts OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of packets in historical minutes interval."
        ::= { zxAnQosAclHisMinPerfEntry 6 }

    zxAnQosAclHMinOcts OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of octets in historical minutes interval."
        ::= { zxAnQosAclHisMinPerfEntry 7 }

--------------------------------------------------------------------------------
-- 1.5 ACL Module History 1 Day Performance Table
--------------------------------------------------------------------------------
    zxAnQosAclHis1DayPerfTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF ZxAnQosAclHis1DayPerfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The 1-day interval historical performance data table of the ACL
             rule."
        ::= { zxAnQosAclPerfObjects 5 }

    zxAnQosAclHis1DayPerfEntry  OBJECT-TYPE
        SYNTAX      ZxAnQosAclHis1DayPerfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The 1-day interval historical performance data entry of the ACL
             rule."
        INDEX   { zxAnQosAclH1DPerfAclNumber, zxAnQosAclH1DPerfRuleId,
                  zxAnQosAclH1DIntervalNo }
        ::= { zxAnQosAclHis1DayPerfTable 1 }

    ZxAnQosAclHis1DayPerfEntry ::= SEQUENCE {
        zxAnQosAclH1DPerfAclNumber     Integer32,
        zxAnQosAclH1DPerfRuleId        Integer32,
        zxAnQosAclH1DIntervalNo        Integer32,
        zxAnQosAclH1DIntervalValidData TruthValue,
        zxAnQosAclH1DDateTime          DateAndTime,
        zxAnQosAclH1DPkts              Counter64,
        zxAnQosAclH1DOcts              Counter64
        }

    zxAnQosAclH1DPerfAclNumber OBJECT-TYPE
        SYNTAX Integer32 (1..699)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The number of an ACL."
        ::= { zxAnQosAclHis1DayPerfEntry 1 }

    zxAnQosAclH1DPerfRuleId OBJECT-TYPE
        SYNTAX Integer32 (1..2147483644)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The ID of a rule."
        ::= { zxAnQosAclHis1DayPerfEntry 2 }

   zxAnQosAclH1DIntervalNo  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
             "The performance data interval number."
        ::= { zxAnQosAclHis1DayPerfEntry 3 }

    zxAnQosAclH1DIntervalValidData  OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
             "Performance data valid flag.
              true(1) means valid.
              false(2) means invalid and the performace data is useless."
        ::= { zxAnQosAclHis1DayPerfEntry 4 }

    zxAnQosAclH1DDateTime  OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
             "The 1-day interval performance data generation time."
        ::= { zxAnQosAclHis1DayPerfEntry 5 }

    zxAnQosAclH1DPkts OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of packets in historical 1-day interval."
        ::= { zxAnQosAclHis1DayPerfEntry 6 }

    zxAnQosAclH1DOcts OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of octets in historical 1-day interval."
        ::= { zxAnQosAclHis1DayPerfEntry 7 }

--------------------------------------------------------------------------------
-- 2. zxAnQosAclPerfConformances
--------------------------------------------------------------------------------
    zxAnQosAclPerfCompliances  OBJECT IDENTIFIER
                                        ::= { zxAnQosAclPerfConformances 1 }
    zxAnQosAclPerfGroups       OBJECT IDENTIFIER
                                        ::= { zxAnQosAclPerfConformances 2 }

    zxAnQosAclPerfCompliance  MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
            "The compliance statement for support of the ACL performance MIB
             module."
        MODULE -- this module
        MANDATORY-GROUPS {
            zxAnQosAclPerfCurrMinGroup,
            zxAnQosAclPerfCurr1DayGroup,
            zxAnQosAclPerfHisMinGroup,
            zxAnQosAclPerfHis1DayGroup
        }
        ::= { zxAnQosAclPerfCompliances 1 }

    zxAnQosAclPerfCurrMinGroup  OBJECT-GROUP
        OBJECTS {
            zxAnQosAclCMinTimeElapsed,
            zxAnQosAclCMinPkts,
            zxAnQosAclCMinOcts,
            zxAnQosAclCMinReset
        }
        STATUS  current
        DESCRIPTION
            "A collection of objects providing for current minute interval
             performance data of the ACL."
        ::= { zxAnQosAclPerfGroups 1 }

    zxAnQosAclPerfCurr1DayGroup  OBJECT-GROUP
        OBJECTS {
            zxAnQosAclC1DTimeElapsed,
            zxAnQosAclC1DPkts,
            zxAnQosAclC1DOcts,
            zxAnQosAclC1DReset
        }
        STATUS  current
        DESCRIPTION
            "A collection of objects providing for current 1-Day interval
             performance data of the ACL."
        ::= { zxAnQosAclPerfGroups 2 }

    zxAnQosAclPerfHisMinGroup  OBJECT-GROUP
        OBJECTS {
            zxAnQosAclHMinIntervalValidData,
            zxAnQosAclHMinDateTime,
            zxAnQosAclHMinPkts,
            zxAnQosAclHMinOcts
        }
        STATUS  current
        DESCRIPTION
            "A collection of objects providing for history minutes interval
             performance data of the ACL."
        ::= { zxAnQosAclPerfGroups 3 }

    zxAnQosAclPerfHis1DayGroup  OBJECT-GROUP
        OBJECTS {
            zxAnQosAclH1DIntervalValidData,
            zxAnQosAclH1DDateTime,
            zxAnQosAclH1DPkts,
            zxAnQosAclH1DOcts
        }
        STATUS  current
        DESCRIPTION
            "A collection of objects providing for history 1-day interval
             performance data of the ACL."
        ::= { zxAnQosAclPerfGroups 4 }

END