All MIBs › ZTE-AN-QOS-MIB › zxAnQosGlobalQueueMode
zxAnQosGlobalQueueMode
Module: ZTE-AN-QOS-MIB
OID (symbolic): ZTE-AN-QOS-MIB::zxAnQosGlobalQueueMode
OID (numeric): 1.3.6.1.4.1.3902.1082.50.1.2.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The global queue mode configuration. pon(1) - The queue configuration is effective on PON interfaces. vportNormal(2) - The queue configuration is effective on VPort, the priority of unicast or multicast green packets is higher than yellow packets. Only four queues is supported. vportCir(3) - The queue configuration is effective on VPort, the priority of unicast green packets is higher than multicast packets, the priority of multicast packets is higher than yellow packets. vportPir(4) - The queue configuration is effective on VPort, the priority of unicast or multicast green packets is higher than yellow packets. Only eight queues is supported. vportNormalBidirectional(5) - The queue configuration supports egress or ingress direction based on vportNormal.
What is zxAnQosGlobalQueueMode?
This object selects the global queue-scheduling mode: pon (queue config applies to PON interfaces), or one of several VPort modes (vportNormal, vportCir, vportPir, vportNormalBidirectional) that each define a different priority ordering between unicast, multicast, and yellow (lower-priority) packets. Admins pick the mode matching the interface type and desired priority scheme for unicast versus multicast traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.50.1.2.2.1.6 snmpwalk -v2c -c public <target> ZTE-AN-QOS-MIB::zxAnQosGlobalQueueMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.50.1.2.2.1.6.1 snmpget -v2c -c public <target> ZTE-AN-QOS-MIB::zxAnQosGlobalQueueMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.50.1.2.2.1.6.1 i <value>
Start monitoring ZTE access-network equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-QOS-MIB::zxAnQosGlobalQueueMode OID value, configure state conditions and alerts, and monitor any ZTE access-network equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | UAS-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.50 | zxAnQos | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.50.1 | zxAnQosMib | ZTE-AN-QOS-MIB |
| 1.3.6.1.4.1.3902.1082.50.1.2 | zxAnQosObjects | ZTE-AN-QOS-MIB |
| 1.3.6.1.4.1.3902.1082.50.1.2.2 | zxAnQosQueueObjects | ZTE-AN-QOS-MIB |
| 1.3.6.1.4.1.3902.1082.50.1.2.2.1 | zxAnQosQueueGlobalObjects | ZTE-AN-QOS-MIB |
| 1.3.6.1.4.1.3902.1082.50.1.2.2.1.6 | zxAnQosGlobalQueueMode | ZTE-AN-QOS-MIB |