XEDIA-IPBACKUP-MIB

All MIBs › XEDIA-IPBACKUP-MIB

Organization: Xedia Corp.

Last Updated: 1998-02-23

Category: Xedia Enterprise Networking

Description: Manages Xedia Corp. IP-level backup path configuration, failover triggers, and restoration policies.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XEDIA-IPBACKUP-MIB?

XEDIA-IPBACKUP-MIB is a Xedia Corporation vendor extension providing additional management objects for IP-level backup path configuration on Xedia devices, layered on top of VRRP or other underlying redundancy protocols. It exposes administrative status objects for IP backup and bridge backup, controlling whether a backup path/interface is enabled, along with the surrounding conformance structure for the backup feature. Its monitoring value is in confirming failover readiness and current state of the device's software-managed redundancy feature; if xipbackupAdminStatus or xipbackupBridgeAdminStatus is unexpectedly disabled, a configured failover path won't activate when the primary path fails. It explicitly builds on VRRP (or other implemented backup procedures) as its underlying mechanism, adding Xedia-specific administrative control on top. It is deployed on Xedia devices used in pairs or groups for IP and bridging path redundancy in enterprise or service-provider access networks. Engineers can download the XEDIA-IPBACKUP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XEDIA-IPBACKUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Xedia router/access device

Monitoring Examples

An administrator would poll xipbackupAdminStatus to confirm IP-level backup is administratively enabled on a device meant to serve as a failover path, and check xipbackupBridgeAdminStatus for the equivalent bridging redundancy setting. If a failover event occurred but the backup path never activated, checking these admin-status objects would quickly reveal whether the backup feature had been left disabled rather than failing at the VRRP protocol level.

What Can Be Monitored

IP backup administrative status
bridge backup administrative status

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

From XEDIA-REG

xediaMibs

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
xediaIpBackupMIB	1.3.6.1.4.1.838.3.15			This module defines additional objects for management of IP Backup in Xedia devices, above and beyond what is defined in the for the VRRP (or other implemented backup procedures).
xipbackupObjects	1.3.6.1.4.1.838.3.15.1
xipbackupGeneral	1.3.6.1.4.1.838.3.15.1.1
INT xipbackupAdminStatus	1.3.6.1.4.1.838.3.15.1.1.1	INTEGER	read-write	The administrative status of IP Backup for the IP router. It is the desired state of IP Backup for the router. The value 'enabled(1)' indicates that the IP Backup process should be active in the router, while 'disabled(2)' indicates that IP Backup should not be active for the router.
INT xipbackupBridgeAdminStatus	1.3.6.1.4.1.838.3.15.1.1.2	INTEGER	read-write	The administrative status of IP Backup for the bridge. It is the desired state of IP Backup for the bridge. The value 'enabled(1)' indicates that the IP Backup process should be active in the router, while 'disabled(2)' indicates that IP Backup should not be active for the bridge. The bridge will not forward frames if this value is enabled unless it has achieved the master state through the IP Backup protocol.
xipbackupInstTable	1.3.6.1.4.1.838.3.15.1.2		not-accessible	The information associated with a backup instance. This typically augments the vrrpOperTable.
xipbackupInstEntry	1.3.6.1.4.1.838.3.15.1.2.1		not-accessible	An entry in the table, containing the operational characteristics of a backup instance. A given backup instance is identifed by a combination of the IF index and instance ID. This table typically augments the VRRP vrrpOperTable where vrid = instance ID.
BAC xipbackupInstId	1.3.6.1.4.1.838.3.15.1.2.1.1	BackupId	not-accessible	This object contains the backup instance identifier.
IP xipbackupInstTrackIp	1.3.6.1.4.1.838.3.15.1.2.1.2	IpAddress	read-write	An IP address to be 'tracked' by this backup instance. If this value is set, a backup instance (virtual router) cannot become Master if this interface is not up.
INT xipbackupInstInitializeCode	1.3.6.1.4.1.838.3.15.1.2.1.3	INTEGER	read-only	The reason, if any, that this virtual router has not progressed past the Initialize state. If multiple reasons, are present, only one value is shown and correcting that condition or configuration will reveal the remaining reason(s). If the virtual router may enter the Master or Backup state, the value shown is 'ready'.
xipbackupConformance	1.3.6.1.4.1.838.3.15.2
xipbackupCompliances	1.3.6.1.4.1.838.3.15.2.1
xipbackupCompliance	1.3.6.1.4.1.838.3.15.2.1.1			The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
xipbackupGroups	1.3.6.1.4.1.838.3.15.2.2
xipbackupAllGroup	1.3.6.1.4.1.838.3.15.2.2.1			The set of all accessible objects in this MIB.

RFC description

Manages IP backup and VRRP redundancy configuration for routers and bridges.

Start monitoring Xedia router/access device (IP/bridge backup-path admin-status status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XEDIA-IPBACKUP-MIB

What Is XEDIA-IPBACKUP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description