XEDIA-ADDRPOOL-MIB

All MIBs › XEDIA-ADDRPOOL-MIB

Organization: Xedia Corp.

Last Updated: 2000-01-27

Category: Xedia Enterprise Networking

Description: Manages Xedia Corp. IP address pool allocation, utilization tracking, and dynamic assignment statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XEDIA-ADDRPOOL-MIB?

XEDIA-ADDRPOOL-MIB is a Xedia Corp. (built on XEDIA-REG) proprietary MIB managing IP address pools, likely for dial-in/PPP client assignment. Its config table, keyed by identifier, records network, mask, and row status, while an allocation table records name identifier, allocated IP address, user layer, and remote user. As a configuration/status MIB it lets an administrator confirm which IP address is currently allocated to a specific remote user from a Xedia address pool. It is deployed on Xedia Corp. remote-access/routing equipment (IP address pools). Engineers can download the XEDIA-ADDRPOOL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XEDIA-ADDRPOOL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Xedia Corp. remote-access/routing equipment (IP address pools)

Monitoring Examples

An administrator checks addrPoolAllocationRemoteUser and addrPoolAllocationIpAddress to confirm which remote user holds a given IP address from a Xedia address pool.

What Can Be Monitored

IP address-pool allocation per remote user

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

From XEDIA-REG

xediaMibs

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
xediaAddrPoolMIB	1.3.6.1.4.1.838.3.43			This module defines objects for management of Xedia's IP Address Pool.
addrPoolObjects	1.3.6.1.4.1.838.3.43.1
addrPoolConfigTable	1.3.6.1.4.1.838.3.43.1.1		not-accessible	The Addr Pool configuration table.
addrPoolConfigEntry	1.3.6.1.4.1.838.3.43.1.1.1		not-accessible	An Addr Pool configuration entry. An entry in this table corresponds to a pool of ip addresses.
STR addrPoolConfigIdentifier	1.3.6.1.4.1.838.3.43.1.1.1.1	DisplayString	not-accessible	The identifier is a domain name which can be matched against the user domain as received in the PPP user authentication information. For example if a local PPP layer was connected to a downlink of this Layer 2 Dial layer, and it's remote PPP peer requested that an address be assigned to it, the local PPP could request this address from the Layer 2 Dial layer, which would allocate it from a subnet defined in this table.
IP addrPoolConfigNetwork	1.3.6.1.4.1.838.3.43.1.1.1.2	IpAddress	read-create	Network from which ip addresses can be allocated and assigned to remote PPP peers.
IP addrPoolConfigMask	1.3.6.1.4.1.838.3.43.1.1.1.3	IpAddress	read-create	The subnet mask for addrPoolConfigNetwork
ROW addrPoolConfigRowStatus	1.3.6.1.4.1.838.3.43.1.1.1.4	RowStatus	read-create	The status of this Pool entry.
addrPoolAllocationTable	1.3.6.1.4.1.838.3.43.1.2		not-accessible	The Addr Pool allocation table.
addrPoolAllocationEntry	1.3.6.1.4.1.838.3.43.1.2.1		not-accessible	An Addr Pool allocation entry. An entry in this table corresponds to a pool of ip addresses.
STR addrPoolAllocationNameIdentifier	1.3.6.1.4.1.838.3.43.1.2.1.1	DisplayString	not-accessible	The identifier is a domain name.
IP addrPoolAllocationIpAddress	1.3.6.1.4.1.838.3.43.1.2.1.2	IpAddress	not-accessible	An ip address allocated from this address pool.
STR addrPoolAllocationUserLayer	1.3.6.1.4.1.838.3.43.1.2.1.3	DisplayString	read-only	The name of the local connected layer to which the address was allocated.
STR addrPoolAllocationRemoteUser	1.3.6.1.4.1.838.3.43.1.2.1.4	DisplayString	read-only	The name of the remote user to which the address was allocated.
addrPoolConformance	1.3.6.1.4.1.838.3.43.2
addrPoolCompliances	1.3.6.1.4.1.838.3.43.2.1
addrPoolCompliance	1.3.6.1.4.1.838.3.43.2.1.1			The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
addrPoolGroups	1.3.6.1.4.1.838.3.43.2.2
addrPoolConfigGroup	1.3.6.1.4.1.838.3.43.2.2.1			A collection of objects providing configuration of address pools.
addrPoolAllocationGroup	1.3.6.1.4.1.838.3.43.2.2.2			A collection of objects providing status of address pools.

RFC description

IP address pool management for Xedia routers including pool configuration and allocation.

Start monitoring Xedia Corp. remote-access/routing equipment, IP address pools (per-user address-allocation status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XEDIA-ADDRPOOL-MIB

What Is XEDIA-ADDRPOOL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description