WWP-VOICE-GATEWAY-MIB :: wwpVoiceGatewayCallAgentAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWWP-VOICE-GATEWAY-MIBwwpVoiceGatewayCallAgentAddr

wwpVoiceGatewayCallAgentAddr

Module: WWP-VOICE-GATEWAY-MIB

OID (symbolic): WWP-VOICE-GATEWAY-MIB::wwpVoiceGatewayCallAgentAddr

OID (numeric): 1.3.6.1.4.1.6141.2.43.1.1.1.2

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This object is used to configure either the domain name or the IP address of the Call Agent in standard dot notation.

The complete address of a default call agent is composed of IP address/Domain Name and UDP port.

wwpVoiceGatewayCallAgentAddr specifies address of the Call Agent to which RSIP(RestartInProgress) message is sent whenever system starts up or line goes up.

Call agent address may be an IP address or fully qualified domain name (FQDN). This object should be set to zero length string if the Management Stations wish to attempt to obtain the CA address from a DNS server (highest priority MGCP CA is chosen).

What is wwpVoiceGatewayCallAgentAddr?

This sets the IP address or fully-qualified domain name of the Call Agent that this voice gateway sends its RSIP (Restart In Progress) message to on startup or when a line comes up. Leaving it a zero-length string tells the gateway to instead discover the call agent via DNS, picking the highest-priority MGCP CA found.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.43.1.1.1.2
snmpwalk -v2c -c public <target> WWP-VOICE-GATEWAY-MIB::wwpVoiceGatewayCallAgentAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.43.1.1.1.2.1
snmpget -v2c -c public <target> WWP-VOICE-GATEWAY-MIB::wwpVoiceGatewayCallAgentAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.43.1.1.1.2.1 s <value>

Start monitoring World Wide Packets voice gateway appliance, VoIP media/SIP gateway (SIP call-routing/dial-timer/codec config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-VOICE-GATEWAY-MIB::wwpVoiceGatewayCallAgentAddr OID value, configure state conditions and alerts, and monitor any World Wide Packets voice gateway appliance, VoIP media/SIP gateway (SIP call-routing/dial-timer/codec config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.43wwpVoiceGatewayMIBWWP-VOICE-GATEWAY-MIB
1.3.6.1.4.1.6141.2.43.1wwpVoiceGatewayMIBObjectsWWP-VOICE-GATEWAY-MIB
1.3.6.1.4.1.6141.2.43.1.1wwpVoiceGatewayWWP-VOICE-GATEWAY-MIB
1.3.6.1.4.1.6141.2.43.1.1.1wwpVoiceGatewayMGCPWWP-VOICE-GATEWAY-MIB
1.3.6.1.4.1.6141.2.43.1.1.1.2wwpVoiceGatewayCallAgentAddrWWP-VOICE-GATEWAY-MIB