WWP-LEOS-PBT-MIB

All MIBs › WWP-LEOS-PBT-MIB

Organization: Ciena, Inc

Last Updated: 2011-07-05

Category: Ciena LEOS Carrier Ethernet

Description: Manages Ciena LEOS Provider Backbone Transport tunnel configuration and forwarding path status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-LEOS-PBT-MIB?

WWP-LEOS-PBT-MIB is a Ciena (World Wide Packets, LEOS platform) proprietary MIB implementing PBT (Provider Backbone Transport, IEEE 802.1Qay), a connection-oriented Ethernet-tunneling technology built on top of the vendor's VPLS MIB. Its objects cover bridge MAC address, service/tunnel tag EtherTypes, tunnel-reversion state and hold time, transit-tunnel EtherType remarking, admin/operational mode, service-VLAN TPID, tunnel-switchover hold time, a bridge-name-to-MAC mapping table, a reserved-B-VID table, and a virtual-circuit table, alongside tunnel activate/deactivate/reversion notifications. As a configuration/protocol-status MIB it lets an administrator confirm a PBT tunnel's admin/operational mode and watch for reversion or switchover events. It is deployed on Ciena (World Wide Packets LEOS) carrier Ethernet switches using PBT. Engineers can download the WWP-LEOS-PBT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-PBT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena (World Wide Packets LEOS) carrier Ethernet switches (PBT)

Monitoring Examples

An administrator subscribes to wwpLeosTcePbtTunnelReversionNotification to get alerted whenever a PBT tunnel reverts to its primary path after a protection switchover on a Ciena LEOS switch.

What Can Be Monitored

PBT tunnel mode, switchover, and reversion events

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

From WWP-LEOS-VPLS-MIB

wwpLeosVplsEncapTunnelActive	OBJECT-TYPE
wwpLeosVplsEncapTunnelBVID	OBJECT-TYPE
wwpLeosVplsEncapTunnelId	OBJECT-TYPE
wwpLeosVplsEncapTunnelName	OBJECT-TYPE

From WWP-SMI

wwpModulesLeos

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpLeosPbtMIB	1.3.6.1.4.1.6141.2.60.38			Added objects wwpLeosPbtVirtualCircuitDestBridgeIndex, wwpLeosPbtTunnelSwitchOverHoldTime, WwpLeosTcePbtServiceEntry wwpLeosPbtLocalBridgeNameMacMapEntry, wwpLeosTcePbtTnlGroupEntry, wwpLeosTcePbtEncapTnlEntry, wwpLeosTcePbtDecapTnlEntry, wwpLeosTcePbtServiceUserFrameL2TransformEntry. Added Notifications wwpLeosTcePbtTunnelActivateNotification, wwpLeosTcePbtTunnelDeactivateNotification, wwpLeosTcePbtTunnelReversionNotification.
wwpLeosPbtMIBObjects	1.3.6.1.4.1.6141.2.60.38.1
wwpLeosPbt	1.3.6.1.4.1.6141.2.60.38.1.1
wwpLeosPbtGlobalAttrs	1.3.6.1.4.1.6141.2.60.38.1.1.1
MAC wwpLeosPbtBridgeMac	1.3.6.1.4.1.6141.2.60.38.1.1.1.1	MacAddress	read-write	This represents the provider mac address to be used as source mac during PBT encapsulation. If this object is not set then it will return default mac derived from chassis mac.
OCT wwpLeosPbtServiceTagEType	1.3.6.1.4.1.6141.2.60.38.1.1.1.2	OCTET STRING	read-write	This represents the etype value to be used in I-Tag (Service tag) section of PBT encapsulation. The I-tag ether type cannot be modified in native mode PBT
OCT wwpLeosPbtTunnelTagEtype	1.3.6.1.4.1.6141.2.60.38.1.1.1.3	OCTET STRING	read-write	This represents the etype value to be used in B-Tag section of PBT encapsulation. Valid values are 8100, 9100 & 88a8
INT wwpLeosPbtTunnelReversionState	1.3.6.1.4.1.6141.2.60.38.1.1.1.4	INTEGER	read-write	Setting this object will enable or disable automatic tunnel reversion from backup to primary if primary comes back up. Device will wait for wwpLeosPbtTunnelReversionHoldTime before switching that data traffic back to primary automatically.
U32 wwpLeosPbtTunnelReversionHoldTime	1.3.6.1.4.1.6141.2.60.38.1.1.1.5	Unsigned32	read-write	This object represents the hold time before data traffic on the backup tunnel will automatically revert to the primary tunnel.
INT wwpLeosPbtTransitTunnelEtypeRemark	1.3.6.1.4.1.6141.2.60.38.1.1.1.6	INTEGER	read-write	Setting this object will enable or disable remarking of the EtherType field in the B-Tag (tunnel) portion of PBT frames that are transiting through the device without PBT encapsulation, nor decapsulation. While enabled, applicable PBT transit frames egressing a PBT enhanced port will have their B-Tag EtherType marked with the value configured as the wwpLeosPbtTunnelTagEtype.
INT wwpLeosPbtAdminMode	1.3.6.1.4.1.6141.2.60.38.1.1.1.7	INTEGER	read-write	This object represents PBT Admin mode. Some platforms support either non-native or native mode.
INT wwpLeosPbtOperMode	1.3.6.1.4.1.6141.2.60.38.1.1.1.8	INTEGER	read-write	This object represents PBT Oper mode. Some platforms support either non-native or native mode.
OCT wwpLeosPbtServiceVlanTpid	1.3.6.1.4.1.6141.2.60.38.1.1.1.9	OCTET STRING	read-write	When operating in native mode, this is the value of the service vlan TPID that will be used if retain-stag is set to TRUE. This is configurable only in native mode PBT. In non-native mode, this value defaults to the 0x8100 and cannot be changed. Valid values are 8100, 9100 and 88a8
U32 wwpLeosPbtTunnelSwitchOverHoldTime	1.3.6.1.4.1.6141.2.60.38.1.1.1.10	Unsigned32	read-write	This object represents the hold time before data traffic on backup tunnel will automatically switchover to primary tunnel.
wwpLeosPbtBridgeNameMacMapTable	1.3.6.1.4.1.6141.2.60.38.1.1.2		not-accessible	The (conceptual) table listing the host names to mac mapping table. To create entry in this table use SNMP multiple set operation. - wwpLeosPbtBridgeNameMacMapBridgeName must be specified. - wwpLeosPbtBridgeNameMacMapMacAddr must be specified. - wwpLeosPbtBridgeNameMacMapRowStatus must be specified.
wwpLeosPbtBridgeNameMacMapEntry	1.3.6.1.4.1.6141.2.60.38.1.1.2.1		not-accessible	The host name to mac address table entry indexed by wwpLeosPbtBridgeNameMacMapIndex.
INT wwpLeosPbtBridgeNameMacMapIndex	1.3.6.1.4.1.6141.2.60.38.1.1.2.1.1	INTEGER	read-only	This represents the unique index in the table.
STR wwpLeosPbtBridgeNameMacMapBridgeName	1.3.6.1.4.1.6141.2.60.38.1.1.2.1.2	DisplayString	read-create	This represents the host name of the provider edge device. This object is not allowed to be modified.
MAC wwpLeosPbtBridgeNameMacMapMacAddr	1.3.6.1.4.1.6141.2.60.38.1.1.2.1.3	MacAddress	read-create	This represents the mac address of the provider edge device. This object is not allowed to be modified.
C32 wwpLeosPbtBridgeNameMacMapUseCount	1.3.6.1.4.1.6141.2.60.38.1.1.2.1.4	Counter32	read-only	This object specifies the total number of encap tunnels using this entry.
ROW wwpLeosPbtBridgeNameMacMapRowStatus	1.3.6.1.4.1.6141.2.60.38.1.1.2.1.5	RowStatus	read-create	Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.
wwpLeosPbtReservedBVIDTable	1.3.6.1.4.1.6141.2.60.38.1.1.3		not-accessible	The (conceptual) table listing the BVID vlans reserved for provider backbone bridge tunnels.
wwpLeosPbtReservedBVIDEntry	1.3.6.1.4.1.6141.2.60.38.1.1.3.1		not-accessible	The entry to reserve BVID vlans vlans for provider backbone bridge tunnels.
I32 wwpLeosPbtReservedBVID	1.3.6.1.4.1.6141.2.60.38.1.1.3.1.1	Integer32	read-only	This object is used to specify the VLAN ID to be reserved for PBT tunnels.
ROW wwpLeosPbtReservedBVIDRowStatus	1.3.6.1.4.1.6141.2.60.38.1.1.3.1.2	RowStatus	read-create	Setting this object to 'createandgo' will reserve the BVID VLAN for provider backbone bridge tunnels. Setting this object to 'destroy will no longer have BVID VLAN reserved for the virtual switch.
wwpLeosPbtVirtualCircuitTable	1.3.6.1.4.1.6141.2.60.38.1.1.4		not-accessible	The (conceptual) table listing the virtual circuit mac in mac table. To create entry use SNMP multiple set operation because following mib objects needs to be set when creating entry in the table. - wwpLeosPbtVirtualCircuitName must be specified. - wwpLeosPbtVirtualCircuitIngressISID must be specified. - wwpLeosPbtVirtualCircuitEgressISID must be specified. - wwpLeosPbtVirtualCircuitRowStatus must be specified. - wwpLeosPbtVirtualCircuitIngressISID & wwpLeosPbtVirtualCircuitEgressISID must be the same values.
wwpLeosPbtVirtualCircuitEntry	1.3.6.1.4.1.6141.2.60.38.1.1.4.1		not-accessible	The virtual circuit table entry index by wwpLeosPbtVirtualCircuitIndex.
INT wwpLeosPbtVirtualCircuitIndex	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.1	INTEGER	read-only	This represents the virtual circuit mac in mac index in the table. This number should be unique in the table.
STR wwpLeosPbtVirtualCircuitName	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.2	DisplayString	read-create	This represents the name of the mac in mac virtual circuit.
I32 wwpLeosPbtVirtualCircuitFixedEncapTunnelId	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.3	Integer32	read-create	This represents the fixed tunnel this virtual circuit should be mapped to.
I32 wwpLeosPbtVirtualCircuitDestBridgeIndex	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.4	Integer32	read-create	This represents the provider destination host name used for this tunnel. This must be set to one of the value specified by wwpLeosPbtBridgeNameMacMapIndex. if set to 0, device will interpret it as not specified.
I32 wwpLeosPbtVirtualCircuitIngressISID	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.5	Integer32	read-create	This represents the ingress ISID associated with the virtual circuit.
I32 wwpLeosPbtVirtualCircuitEgressISID	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.6	Integer32	read-create	This represents the egress ISID associated with the virtual circuit.
INT wwpLeosPbtVirtualCircuitOperState	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.7	INTEGER	read-only	This represents the operational state of this virtual circuit.
I32 wwpLeosPbtVirtualCircuitEncapTunnelIdInUse	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.8	Integer32	read-only	This represents the tunnels ID of the active tunnel this virtual circuit is currently using. This tunnel can be primary of backup tunnel.
ROW wwpLeosPbtVirtualCircuitRowStatus	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.9	RowStatus	read-create	Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy' If the entry exists, it will be displayed as 'active'.
T/F wwpLeosPbtVirtualCircuitRetainSTAG	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.10	TruthValue	read-create	When operating in PBT mode, writing TRUE(1) to this object forces this vc to retain the S-Tag. When FALSE(0) is written, the S-Tag will be popped on egress and push the tag on ingress.
I32 wwpLeosPbtVirtualCircuitStag	1.3.6.1.4.1.6141.2.60.38.1.1.4.1.11	Integer32	read-create	When operating in PBT mode, this is the value of the s-tag that will be used if retain-stag is set to TRUE. This is configurable only in native mode PBT. In non-native mode, this value defaults to the RVID and cannot be changed.
wwpLeosPbtVirtualCircuitStatsTable	1.3.6.1.4.1.6141.2.60.38.1.1.5		not-accessible	The (conceptual) table listing the mpls virtual circuit stats table.
wwpLeosPbtVirtualCircuitStatsEntry	1.3.6.1.4.1.6141.2.60.38.1.1.5.1		not-accessible	The mpls virtual circuit stats table entry index by wwpLeosPbtVirtualCircuitMplsIndex.
C32 wwpLeosPbtVirtualCircuitTxBytesHi	1.3.6.1.4.1.6141.2.60.38.1.1.5.1.1	Counter32	read-only	This represents the total number of higher 32 bits transmitted for given virtual circuit.
C32 wwpLeosPbtVirtualCircuitTxBytesLo	1.3.6.1.4.1.6141.2.60.38.1.1.5.1.2	Counter32	read-only	This represents the total number of lower 32 bits transmitted for given virtual circuit.
C32 wwpLeosPbtVirtualCircuitRxBytesHi	1.3.6.1.4.1.6141.2.60.38.1.1.5.1.3	Counter32	read-only	This represents the total number of higher 32 bits received for given mpls virtual circuit.
C32 wwpLeosPbtVirtualCircuitRxBytesLo	1.3.6.1.4.1.6141.2.60.38.1.1.5.1.4	Counter32	read-only	This represents the total number of lower 32 bits received for given virtual circuit.
wwpLeosPbtLocalBridgeNameMacMapTable	1.3.6.1.4.1.6141.2.60.38.1.1.6		not-accessible	The (conceptual) table listing the host names to mac mapping table. To create entry in this table use SNMP multiple set operation. - wwpLeosPbtHostNameMacMapHostName must be specified. - wwpLeosPbtHostNameMacMapMacAddr must be specified. - wwpLeosPbtHostNameMacMapRowStatus must be specified.
wwpLeosPbtLocalBridgeNameMacMapEntry	1.3.6.1.4.1.6141.2.60.38.1.1.6.1		not-accessible	The host name to mac address table entry indexed by wwpLeosPbtLocalBridgeNameMacMapIndex.
INT wwpLeosPbtLocalBridgeNameMacMapIndex	1.3.6.1.4.1.6141.2.60.38.1.1.6.1.1	INTEGER	read-only	This represents the unique index in the table.
STR wwpLeosPbtLocalBridgeNameMacMapBridgeName	1.3.6.1.4.1.6141.2.60.38.1.1.6.1.2	DisplayString	read-create	This represents the host name of the provider edge device. This object is not allowed to be modified.
MAC wwpLeosPbtLocalBridgeNameMacMapMacAddr	1.3.6.1.4.1.6141.2.60.38.1.1.6.1.3	MacAddress	read-only	This represents the mac address of the provider edge device. This object is not allowed to be modified.
C32 wwpLeosPbtLocalBridgeNameMacMapUseCount	1.3.6.1.4.1.6141.2.60.38.1.1.6.1.4	Counter32	read-only	This object specifies the total number of encap tunnels using this entry.
ROW wwpLeosPbtLocalBridgeNameMacMapRowStatus	1.3.6.1.4.1.6141.2.60.38.1.1.6.1.5	RowStatus	read-create	Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.
wwpLeosTcePbt	1.3.6.1.4.1.6141.2.60.38.1.1.10
wwpLeosTcePbtServiceTable	1.3.6.1.4.1.6141.2.60.38.1.1.10.1		not-accessible	The (conceptual) table listing the Pbt Service table. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtServiceName must be specified. - wwpLeosTcePbtServiceIngressIsId must be specified. - wwpLeosTcePbtServiceEgressIsId must be specified. - wwpLeosTcePbtServiceRowStatus must be specified.
wwpLeosTcePbtServiceEntry	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1		not-accessible	The Pbt Service table entry indexed by wwpLeosTcePbtServiceIndex.
U32 wwpLeosTcePbtServiceIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.1	Unsigned32	not-accessible	This represents the unique index in the table.
STR wwpLeosTcePbtServiceName	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.2	DisplayString	read-create	This represents the Pbt service name. This object is not allowed to be modified.
INT wwpLeosTcePbtServiceOperStatus	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.3	INTEGER	read-only	This represents the operational state of this service.
INT wwpLeosTcePbtServiceFloodContProfileId	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.4	INTEGER	read-create	Pbt Service Ingress Flood Container Profile Index
STR wwpLeosTcePbtServiceFloodContProfileName	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.5	DisplayString	read-only	Pbt Service Ingress Flood Container Profile Name
U32 wwpLeosTcePbtServiceVsIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.6	Unsigned32	read-create	Vs Index to which Pbt service is attached. To detach Pbt Service with the VS, set this object to 0.
STR wwpLeosTcePbtServiceVsName	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.7	DisplayString	read-only	Virtual Switch Name to which Pbt Service is attached.
U32 wwpLeosTcePbtServiceTnlGroupIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.8	Unsigned32	read-create	Pbt Service Tunnel Group Index
STR wwpLeosTcePbtServiceTnlGroupName	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.9	DisplayString	read-only	Pbt Service Tunnel Group Name
U32 wwpLeosTcePbtServiceIngressIsId	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.10	Unsigned32	read-create	Pbt Service Ingress Isid
U32 wwpLeosTcePbtServiceEgressIsId	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.11	Unsigned32	read-create	Pbt Service Egress-Isid
INT wwpLeosTcePbtServiceFixedEgressPcp	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.12	INTEGER	read-create	Pbt Service Fixed Egress Pcp
INT wwpLeosTcePbtServiceFrameCosPolicy	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.13	INTEGER	read-create	Pbt Service Frame Cos Policy
INT wwpLeosTcePbtServiceFrameCosMapIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.14	INTEGER	read-create	Pbt Service Frame Cos Map Index
STR wwpLeosTcePbtServiceFrameCosMapName	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.15	DisplayString	read-only	Pbt Service Frame Cos Map Name
INT wwpLeosTcePbtServiceResolvedCosPolicy	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.16	INTEGER	read-create	Pbt Service Resolved Cos Policy
INT wwpLeosTcePbtServiceResolvedCosProfileIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.17	INTEGER	read-create	Pbt Service Resolved Cos Profile Index
STR wwpLeosTcePbtServiceResolvedCosProfileName	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.18	DisplayString	read-only	Pbt Service Resolved Cos Profile Name
INT wwpLeosTcePbtServiceIngressMeterProfileId	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.19	INTEGER	read-create	Ingress Meter Profile Id
STR wwpLeosTcePbtServiceIngressMeterProfileName	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.20	DisplayString	read-only	Ingress Meter Profile Name
INT wwpLeosTcePbtServiceIngressMeterPolicy	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.21	INTEGER	read-only	Ingress Meter Policy
ROW wwpLeosTcePbtServiceRowStatus	1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.64	RowStatus	read-create	Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.
wwpLeosTcePbtTnlGroupTable	1.3.6.1.4.1.6141.2.60.38.1.1.10.5		not-accessible	The (conceptual) table listing the Pbt tunnel group table. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtTnlGroupName must be specified. - wwpLeosTcePbtTnlGroupRowStatus must be specified.
wwpLeosTcePbtTnlGroupEntry	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1		not-accessible	This represents an entry of the Pbt tunnel group table.
U32 wwpLeosTcePbtTnlGroupIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.1	Unsigned32	accessible-for-notify	This represents the unique index in the table.
STR wwpLeosTcePbtTnlGroupName	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.2	DisplayString	read-create	This represents the tunnel group name. This object is not allowed to be modified.
T/F wwpLeosTcePbtTnlGroupSyncEnabled	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.3	TruthValue	read-create	TBD - .
INT wwpLeosTcePbtTnlGroupOperStatus	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.4	INTEGER	read-only	This represents the operational state of this service.
U32 wwpLeosTcePbtTnlGroupUseCount	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.5	Unsigned32	read-only	TBD
U32 wwpLeosTcePbtTnlGroupActivePair	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.6	Unsigned32	read-only	An active PBT tunnel pair is two bidirectional tunnels, one inbound and the other outbound, between the same pair of devices paired together to represent a bidirectional PBT trunk. An inbound and an outbound tunnel must map to the same physical port of the device to qualify for the pairing.
T/F wwpLeosTcePbtTnlGroupReverting	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.7	TruthValue	read-only
ROW wwpLeosTcePbtTnlGroupRowStatus	1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.64	RowStatus	read-create	Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.
wwpLeosTcePbtEncapTnlTable	1.3.6.1.4.1.6141.2.60.38.1.1.10.6		not-accessible	The (conceptual) table listing the PBT encap tunnels. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtEncapTnlName must be specified. - wwpLeosTcePbtEncapTnlRemoteBridgeIndex must be specified. - wwpLeosTcePbtEncapTnlBvId must be specified. - wwpLeosTcePbtEncapTnlPgId must be specified. - wwpLeosTcePbtEncapTnlRowStatus must be specified.
wwpLeosTcePbtEncapTnlEntry	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1		not-accessible
U32 wwpLeosTcePbtEncapTnlIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.1	Unsigned32	accessible-for-notify	This represents the unique index in the table.
STR wwpLeosTcePbtEncapTnlName	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.2	DisplayString	read-create	This represents the encap tunnel name. This object is not allowed to be modified.
U32 wwpLeosTcePbtEncapTnlRemoteBridgeIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.3	Unsigned32	read-create
STR wwpLeosTcePbtEncapTnlRemoteBridgeName	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.4	DisplayString	read-only
U32 wwpLeosTcePbtEncapTnlGroupIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.5	Unsigned32	read-create
STR wwpLeosTcePbtEncapTnlGroupName	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.6	DisplayString	read-only
U32 wwpLeosTcePbtEncapTnlBvId	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.7	Unsigned32	read-create
U32 wwpLeosTcePbtEncapTnlPgId	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.8	Unsigned32	read-create
STR wwpLeosTcePbtEncapTnlPortName	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.9	DisplayString	read-only
U32 wwpLeosTcePbtEncapTnlFaults	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.10	Unsigned32	read-only	Each Bit Represents a fault. Value 0 represents no fault. First LSB represents port Fault. Second LSB represents CFM fault and third LSB represent Admin Fault.
INT wwpLeosTcePbtEncapTnlAdminState	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.11	INTEGER	read-create
INT wwpLeosTcePbtEncapTnlOperState	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.12	INTEGER	read-only
INT wwpLeosTcePbtEncapTnlFwdState	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.13	INTEGER	read-only
T/F wwpLeosTcePbtEncapTnlPaired	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.14	TruthValue	read-only
INT wwpLeosTcePbtEncapTnlPairIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.15	INTEGER	read-create
INT wwpLeosTcePbtEncapTnlPairOperState	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.16	INTEGER	read-only
INT wwpLeosTcePbtEncapTnlFrameCosPolicy	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.17	INTEGER	read-create
U32 wwpLeosTcePbtEncapTnlFrameCosMapIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.18	Unsigned32	read-create
STR wwpLeosTcePbtEncapTnlFrameCosMapName	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.19	DisplayString	read-only
INT wwpLeosTcePbtEncapTnlFixedPcp	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.20	INTEGER	read-create
T/F wwpLeosTcePbtEncapTnlCfmConfigured	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.21	TruthValue	read-only
U32 wwpLeosTcePbtEncapTnlPairedDecapIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.22	Unsigned32	read-only
STR wwpLeosTcePbtEncapTnlPairedDecapName	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.23	DisplayString	read-only
U32 wwpLeosTcePbtEncapTnlWeight	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.24	Unsigned32	read-create
T/F wwpLeosTcePbtEncapTnlStatsEnabled	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.25	TruthValue	read-only
U32 wwpLeosTcePbtEncapTnlLocalBridgeIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.26	Unsigned32	read-create
STR wwpLeosTcePbtEncapTnlLocalBridgeName	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.27	DisplayString	read-only
U32 wwpLeosTcePbtEncapTnlReversionToPairIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.28	Unsigned32	accessible-for-notify	Reversion occurs to this tunnel pair index in a tunnel group and is used in the definition of trap..
U32 wwpLeosTcePbtEncapTnlReversionFromPairIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.29	Unsigned32	accessible-for-notify	Reversion occurs from this tunnel pair index in a tunnel group and is used in the definition of trap.
ROW wwpLeosTcePbtEncapTnlRowStatus	1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.64	RowStatus	read-create	Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.
wwpLeosTcePbtDecapTnlTable	1.3.6.1.4.1.6141.2.60.38.1.1.10.7		not-accessible	The (conceptual) table listing the PBT decap tunnels. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtDecapTnlName must be specified. - wwpLeosTcePbtDecapTnlBvId must be specified. - wwpLeosTcePbtDecapTnlPgId must be specified. - wwpLeosTcePbtDecapTnlRowStatus must be specified.
wwpLeosTcePbtDecapTnlEntry	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1		not-accessible
U32 wwpLeosTcePbtDecapTnlIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.1	Unsigned32	not-accessible	This represents the unique index in the table.
STR wwpLeosTcePbtDecapTnlName	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.2	DisplayString	read-create	This represents the decap tunnel name. This object is not allowed to be modified.
U32 wwpLeosTcePbtDecapTnlRemoteBridgeIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.3	Unsigned32	read-create
STR wwpLeosTcePbtDecapTnlRemoteBridgeName	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.4	DisplayString	read-only
U32 wwpLeosTcePbtDecapTnlGroupIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.5	Unsigned32	read-create
STR wwpLeosTcePbtDecapTnlGroupName	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.6	DisplayString	read-only
U32 wwpLeosTcePbtDecapTnlBvId	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.7	Unsigned32	read-create	not allow to modify
U32 wwpLeosTcePbtDecapTnlPgId	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.8	Unsigned32	read-create	not allow to modify
STR wwpLeosTcePbtDecapTnlPortName	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.9	DisplayString	read-only
U32 wwpLeosTcePbtDecapTnlFaults	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.10	Unsigned32	read-only	Each Bit Represents a fault. Value 0 represents no fault. First LSB represents port Fault. Second LSB represents CFM fault and value 3 represents port and CFM fault.
INT wwpLeosTcePbtDecapTnlOperState	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.11	INTEGER	read-only
INT wwpLeosTcePbtDecapTnlFwdState	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.12	INTEGER	read-only
T/F wwpLeosTcePbtDecapTnlPaired	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.13	TruthValue	read-only
INT wwpLeosTcePbtDecapTnlPairIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.14	INTEGER	read-create
INT wwpLeosTcePbtDecapTnlPairOperState	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.15	INTEGER	read-only
INT wwpLeosTcePbtDecapTnlResolvedCosPolicy	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.16	INTEGER	read-create
U32 wwpLeosTcePbtDecapTnlResolvedCosMapIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.17	Unsigned32	read-create
STR wwpLeosTcePbtDecapTnlResolvedCosMapName	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.18	DisplayString	read-only
T/F wwpLeosTcePbtDecapTnlCfmConfigured	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.19	TruthValue	read-only
U32 wwpLeosTcePbtDecapTnlPairedEncapIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.20	Unsigned32	read-only
STR wwpLeosTcePbtDecapTnlPairedEncapName	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.21	DisplayString	read-only
T/F wwpLeosTcePbtDecapTnlStatsEnabled	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.22	TruthValue	read-only
ROW wwpLeosTcePbtDecapTnlRowStatus	1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.64	RowStatus	read-create	Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.
wwpLeosTcePbtServiceUserFrameL2TransformTable	1.3.6.1.4.1.6141.2.60.38.1.1.10.8		not-accessible	Table of pbt service user frame L2 Transform table. Two entries in this table are automatically created when a pbt service is created (one for ingress and one for egress). The entries are deleted from this table when the corresponding pbt service is deleted. Therefore, there is no rowStatus field exposed in this mib-table entry.
wwpLeosTcePbtServiceUserFrameL2TransformEntry	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1		not-accessible	Logical Interface entry in the Logical Interfaces Table.
INT wwpLeosTcePbtServiceUserFrameL2TransformDirection	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.1	INTEGER	not-accessible	This object specifies pbt service L2 Transform direction of either ingress or egress.
INT wwpLeosTcePbtServiceUserFrameL2TransformTagIndex	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.2	INTEGER	not-accessible	This object specifies pbt service user frame L2 Transform direction entry index. Initial deployment supports a single tag transform. As such, tag index 2 will always have tag action of none(1).
INT wwpLeosTcePbtServiceUserFrameL2TransformTagAction	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.3	INTEGER	read-write	This object specifies pbt service L2 Transform Action Type. Initial deployment supports egress/encap actions including none(1) and push(2). Initial deployment supports ingress/decap actions including none(1) and pop(3).
INT wwpLeosTcePbtServiceUserFrameL2TransformTagValue	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.4	INTEGER	read-write	This object specifies pbt service L2 Transform tag value.
INT wwpLeosTcePbtServiceUserFrameL2TransformTagEtype	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.5	INTEGER	read-write	This object specifies the L2 transform Etype. The Etype must be specified for a push action. The Etype MAY be specified for a stamp action.
INT wwpLeosTcePbtServiceUserFrameL2TransformTagPriority	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.6	INTEGER	read-write	This object specifies the L2 transform tag static or fixed priority. Use of this value depends on the L2 transform action, e.g., push or stamp, as well as the priority policy.
INT wwpLeosTcePbtServiceUserFrameL2TransformPriPolicy	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.7	INTEGER	read-write	This object specifies L2 Transform for the L2 tag priority.
T/F wwpLeosTcePbtServiceUserFrameL2TransformUseTagValue	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.8	TruthValue	read-write	This object specifies to use the tag value when stamping. If the action is to push, the tag value will always be used.
T/F wwpLeosTcePbtServiceUserFrameL2TransformUseTagEtype	1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.9	TruthValue	read-write	This object specifies to use the tag etype when stamping. If the action is to push, the tag etype will always be used.
wwpLeosPbtMIBNotificationPrefix	1.3.6.1.4.1.6141.2.60.38.2
wwpLeosPbtMIBNotifications	1.3.6.1.4.1.6141.2.60.38.2.0
NTF wwpLeosPbtTunnelFaultNotification	1.3.6.1.4.1.6141.2.60.38.2.0.1			This notification is sent every time the tunnel becomes operationally down.
NTF wwpLeosPbtTunnelReversionNotification	1.3.6.1.4.1.6141.2.60.38.2.0.2			This notification is sent every time backup tunnel reverts back to primary tunnel, once primary tunnel comes up. Var binding wwpLeosVplsEncapTunnelId represents the primary tunnel ID.
NTF wwpLeosPbtTunnelActivateNotification	1.3.6.1.4.1.6141.2.60.38.2.0.3			This notification is sent every time tunnel is activated. Var binding wwpLeosVplsEncapTunnelId represents the tunnel ID.
NTF wwpLeosPbtTunnelDeactivateNotification	1.3.6.1.4.1.6141.2.60.38.2.0.4			This notification is sent every time tunnel is de-activated. Var binding wwpLeosVplsEncapTunnelId represents the tunnel ID.
NTF wwpLeosTcePbtTunnelActivateNotification	1.3.6.1.4.1.6141.2.60.38.2.0.10			This notification is sent everytime tunnel of the given tunnel group is activated.
NTF wwpLeosTcePbtTunnelDeactivateNotification	1.3.6.1.4.1.6141.2.60.38.2.0.11			This notification is sent everytime tunnel of the given tunnel group is deactivated.
NTF wwpLeosTcePbtTunnelReversionNotification	1.3.6.1.4.1.6141.2.60.38.2.0.12			Upon the failure of the primary tunnel, traffic is moved over to the backup tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic from this backup tunnel (now active) to the primary (now standby) after the primary tunnel is restored. This notification is generated when this reversion occurs.
wwpLeosPbtMIBConformance	1.3.6.1.4.1.6141.2.60.38.3
wwpLeosPbtMIBCompliances	1.3.6.1.4.1.6141.2.60.38.3.1
wwpLeosPbtMIBGroups	1.3.6.1.4.1.6141.2.60.38.3.2
pbtGlobalConfigGroup	1.3.6.1.4.1.6141.2.60.38.3.2.1			A collection of objects providing information applicable global PBT confoguration.
pbtBridgeNameMacMapGroup	1.3.6.1.4.1.6141.2.60.38.3.2.2			A collection of objects providing information applicable to BridgeName to mac mapping.
pbtReserveBvidGroup	1.3.6.1.4.1.6141.2.60.38.3.2.3			A collection of objects providing information applicable to BVID reservation.
pbtVirtualCircuitGroup	1.3.6.1.4.1.6141.2.60.38.3.2.4			A collection of objects providing information applicable to PBT virtual circuit configuration.
pbtVirtualCircuitStatsGroup	1.3.6.1.4.1.6141.2.60.38.3.2.5			A collection of objects providing information applicable to virtual circuit stats group.
pbtNotificationGroups	1.3.6.1.4.1.6141.2.60.38.3.2.6			Contains Notification supported for PBT.

RFC description

Ciena/World Wide Packets MIB for Provider Backbone Bridging and Tunneling (PBT) functionality on SAOS network devices. Defines management objects for PBT encapsulation configuration, tunnel groups, tunnel reversion, virtual circuits, and SNMP trap notifications.

Start monitoring Ciena (World Wide Packets LEOS) carrier Ethernet switches, PBT (tunnel admin/oper-mode and reversion-event status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-LEOS-PBT-MIB

What Is WWP-LEOS-PBT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description