WG102-MIB

All MIBs › WG102-MIB

Organization: NETGEAR Inc.

Last Updated: 2004-09-08

Category: NETGEAR Wireless

Description: Manages NETGEAR WG102 wireless access point configuration, radio statistics, and client connectivity monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WG102-MIB?

This is a NETGEAR vendor MIB for the WG102, an 802.11g ProSafe wireless access point aimed at small/medium business deployments. It exposes device identity and network configuration data - MAC address, firmware version, IP address/subnet/gateway, DNS server, DHCP mode - along with system name, date/time, timezone/DST, and regulatory country domain settings. For monitoring it reports software status through apFirmwareVersion (confirming the AP is on the expected release) and configuration health through the IP/DHCP settings, while apDateTime/apTimeZone/apDaylightSaving let an admin verify the AP's clock is correctly synchronized for log correlation. It is a standalone vendor MIB; deeper radio and per-client statistics on this AP would typically come from standard 802.11 (dot11) wireless MIBs alongside it. It is deployed on NETGEAR WG102 access points in small/medium business wireless networks, managed via NETGEAR's tools or a generic SNMP NMS. Engineers can download the WG102-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WG102-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NETGEAR WG102 802.11g ProSafe wireless access points

Monitoring Examples

An admin would poll apFirmwareVersion to confirm the AP is running the expected firmware release, check apIPaddress/apIPsubnetMask/apGateway/apDNSServerIPAddress and apDHCPMode to verify current network configuration, and check apDateTime/apTimeZone/apDaylightSaving to confirm the AP's clock is correctly synchronized, which matters for correlating its logs with other network events.

What Can Be Monitored

firmware version
IP/network configuration
DHCP mode
system name
date/time and timezone settings
country/regulatory domain

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress
enterprises

From RFC1213-MIB

DisplayString
PhysAddress
ifIndex

From SNMPv2-SMI

MODULE-IDENTITY
Unsigned32

OIDs

OID symbolic	OID numeric	Type	Access	Description
netgear	1.3.6.1.4.1.4526
wirelessProducts	1.3.6.1.4.1.4526.4
wg102	1.3.6.1.4.1.4526.4.3
version	1.3.6.1.4.1.4526.4.3.1000			The MIB module for 802.11g ProSafe Wireless Access Point entities.
wirelessAPSystemGroup	1.3.6.1.4.1.4526.4.3.1000.1
PHY apMacAddress	1.3.6.1.4.1.4526.4.3.1000.1.1	PhysAddress	read-only	Access Point MAC address, It will be like '00c002003009'
STR apFirmwareVersion	1.3.6.1.4.1.4526.4.3.1000.1.2	DisplayString	read-only
IP apIPaddress	1.3.6.1.4.1.4526.4.3.1000.1.6	IpAddress	read-write
IP apIPsubnetMask	1.3.6.1.4.1.4526.4.3.1000.1.7	IpAddress	read-write
IP apGateway	1.3.6.1.4.1.4526.4.3.1000.1.8	IpAddress	read-write
IP apDNSServerIPAddress	1.3.6.1.4.1.4526.4.3.1000.1.9	IpAddress	read-write
INT apDHCPMode	1.3.6.1.4.1.4526.4.3.1000.1.10	INTEGER	read-write
STR apSystemName	1.3.6.1.4.1.4526.4.3.1000.1.11	DisplayString	read-write	Wireless Access Point Name
STR apTimeZone	1.3.6.1.4.1.4526.4.3.1000.1.13	DisplayString	read-write	Input the numeric 0 UK,GreenWich,Casablanca,Monrovia (GMT), -12 Eniwetok,Kwajalein (GMT-12:00), -11 Midway I., Samoa (GMT-11:00), -10 Hawaii (GMT-10:00), -9.5 Marqesas Is. (GMT-09:30), -9 Alaska (GMT-09:00), -8.5 Pitciarn Is. (GMT-08:30), -8 Pacific Time ..US and Canada (GMT-08:00), -7 MountainTime(USA),Arizona (GMT-07:00), -6 CentralTime(USA),Mexico City,Tequciqalpa (GMT-06:00), -5 EasternTime(USA),Bogota,Lima,Quito,Indiana East (GMT-05:00), -4 Caracas,La Paz (GMT-04:00), -3.5 Newfoundland (GMT-03:30), -3 Brasilia,Beunos Aires,Georgetown (GMT-03:00), -2 Mid-Atlantic (GMT-02:00), -1 Azores,Cape Verde Is. (GMT-01:00), 1 Europe (GMT+01:00), 2 Egypt,Finland,Romania,Turkey,Greece,Israel,Jordan(GMT+02:00), 3 Iraq, Syria,Russia (GMT+03:00), 3.5 Iran (GMT+03:30), 4 Armenia, Azerbaijan (GMT+04:00), 4.5 Afghanistan (GMT+04:30), 5 Russia,Pakistan (GMT+05:00), 5.5 India (GMT+05:30), 6 Bangladesh,Russia (GMT+06:00), 6.5 Burma (GMT+06:30), 7 Russia,Thailand, Combodia, Laos (GMT+07:00), 8 Russia,China,Mongolia,Indonesia,Philippines,Taiwan,WA (GMT+08:00), 9 Russia,Japan,Korea (GMT+09:00), 9.5 Adelaide,Darwin (GMT+09:30), 10 Eastern Standard(Aust),Russia,Gaum,Papua New Guinea (GMT+10:00)
INT apDaylightSaving	1.3.6.1.4.1.4526.4.3.1000.1.14	INTEGER	read-write
INT apCountryDomain	1.3.6.1.4.1.4526.4.3.1000.1.15	INTEGER	read-write	Wireless Access Point Country Domain
STR apDateTime	1.3.6.1.4.1.4526.4.3.1000.1.16	DisplayString	read-only
apConnectedStation	1.3.6.1.4.1.4526.4.3.1000.1.19
apConnectedStationTable	1.3.6.1.4.1.4526.4.3.1000.1.19.1		not-accessible	Wireless AP Connected Station Table Object
apConnectedStationEntry	1.3.6.1.4.1.4526.4.3.1000.1.19.1.1		not-accessible	An entry containing information for Wireless AP Connected Station Table
PHY apConnectedStationMacAddr	1.3.6.1.4.1.4526.4.3.1000.1.19.1.1.1	PhysAddress	read-only	Wireless Connected Station Mac Address
INT apConnectedStationStatus	1.3.6.1.4.1.4526.4.3.1000.1.19.1.1.2	INTEGER	read-only	Wireless Connected Station Status
wirelessAPManageGroup	1.3.6.1.4.1.4526.4.3.1000.2
INT apRebootNow	1.3.6.1.4.1.4526.4.3.1000.2.1	INTEGER	read-write	Setting this object to true(1) causes the device to reset. Reading this object always returns false(2).
INT apResetToFactoryDefault	1.3.6.1.4.1.4526.4.3.1000.2.2	INTEGER	read-write	Setting this object to true(1) causes the device to reset to factory default value. Reading this object always returns false(2).
IP apTrapReceiveIpAddress	1.3.6.1.4.1.4526.4.3.1000.2.5	IpAddress	read-write
INT apSNMPEnable	1.3.6.1.4.1.4526.4.3.1000.2.6	INTEGER	read-write
STR apSNMPReadCommunity	1.3.6.1.4.1.4526.4.3.1000.2.7	DisplayString	read-write
STR apSNMPWriteCommunity	1.3.6.1.4.1.4526.4.3.1000.2.8	DisplayString	read-write
INT apAccessControl	1.3.6.1.4.1.4526.4.3.1000.2.12	INTEGER	read-write	Wireless Access Point Control
apAccessControlList	1.3.6.1.4.1.4526.4.3.1000.2.13
apAccessControlListTable	1.3.6.1.4.1.4526.4.3.1000.2.13.1		not-accessible	Wireless Access Point Control List Table Object
apAccessControlListEntry	1.3.6.1.4.1.4526.4.3.1000.2.13.1.1		not-accessible	An entry containing information for Wireless Access Point Control List Table Object
PHY apAccessControlListMacAddr	1.3.6.1.4.1.4526.4.3.1000.2.13.1.1.1	PhysAddress	read-only	Wireless Access Point Control List Mac Address
apCtlOperate	1.3.6.1.4.1.4526.4.3.1000.2.14
PHY apAddACLMacAddr	1.3.6.1.4.1.4526.4.3.1000.2.14.1	PhysAddress	read-write	The added entry's Physical Address, Reading this object always return '000000000000'
PHY apDelACLMacAddr	1.3.6.1.4.1.4526.4.3.1000.2.14.2	PhysAddress	read-write	The deleted entry's Physical Address, Reading this object always return '000000000000'
INT apSyslog	1.3.6.1.4.1.4526.4.3.1000.2.25	INTEGER	read-write
INT apSyslogPort	1.3.6.1.4.1.4526.4.3.1000.2.26	INTEGER	read-write	Syslog Port
STR apSyslogServer	1.3.6.1.4.1.4526.4.3.1000.2.27	DisplayString	read-write
wirelessAP24GGroup	1.3.6.1.4.1.4526.4.3.1000.3
apWirelessSettingGroup	1.3.6.1.4.1.4526.4.3.1000.3.1
INT apWirelessMode	1.3.6.1.4.1.4526.4.3.1000.3.1.1	INTEGER	read-write
INT apOperateMode	1.3.6.1.4.1.4526.4.3.1000.3.1.2	INTEGER	read-write	AP Operation Mode
INT apBridgeWlanClientAsoc	1.3.6.1.4.1.4526.4.3.1000.3.1.3	INTEGER	read-write
STR apSSID	1.3.6.1.4.1.4526.4.3.1000.3.1.4	DisplayString	read-write	Wireless Access Point SSID This object value should be the same as IEEE 802.11 MIB dot11DesiredSSID
INT apChannelNo	1.3.6.1.4.1.4526.4.3.1000.3.1.5	INTEGER	read-write	Wireless Access Point Channel No Auto(0) default
PHY apRemoteMacAddress	1.3.6.1.4.1.4526.4.3.1000.3.1.6	PhysAddress	read-write	The Destination Address When one operation mode is selected which the remote address necessary.
PHY apChildMacAddress	1.3.6.1.4.1.4526.4.3.1000.3.1.7	PhysAddress	read-write
INT apBroadcastSSID	1.3.6.1.4.1.4526.4.3.1000.3.1.8	INTEGER	read-write	Enabled or disabled Wireless Access Point Broadcast Wireless Network Name SSID
INT apWirelessSeparation	1.3.6.1.4.1.4526.4.3.1000.3.1.9	INTEGER	read-write
INT apFragmentationLength	1.3.6.1.4.1.4526.4.3.1000.3.1.10	INTEGER	read-write
INT apBeaconInterval	1.3.6.1.4.1.4526.4.3.1000.3.1.11	INTEGER	read-write
INT apRTSThreshold	1.3.6.1.4.1.4526.4.3.1000.3.1.12	INTEGER	read-write
INT apPreambleType	1.3.6.1.4.1.4526.4.3.1000.3.1.13	INTEGER	read-write
INT apOutputPowerLevel	1.3.6.1.4.1.4526.4.3.1000.3.1.14	INTEGER	read-write
INT apDTIM	1.3.6.1.4.1.4526.4.3.1000.3.1.15	INTEGER	read-write
INT apSuperG	1.3.6.1.4.1.4526.4.3.1000.3.1.16	INTEGER	read-write
INT apHTTPRedirect	1.3.6.1.4.1.4526.4.3.1000.3.1.17	INTEGER	read-write
STR apHTTPRedirectURL	1.3.6.1.4.1.4526.4.3.1000.3.1.18	DisplayString	read-write
INT apDataRate	1.3.6.1.4.1.4526.4.3.1000.3.1.19	INTEGER	read-write
apStatistic	1.3.6.1.4.1.4526.4.3.1000.3.1.20
apWiredEthernetStat	1.3.6.1.4.1.4526.4.3.1000.3.1.20.1
U32 apLanRecvPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.1.1	Unsigned32	read-only	the field indicates the sum of received packets.
U32 apLanTransPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.1.2	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 apLanRecvBytes	1.3.6.1.4.1.4526.4.3.1000.3.1.20.1.3	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 apLanTransBytes	1.3.6.1.4.1.4526.4.3.1000.3.1.20.1.4	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
apWirelessStat	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2
U32 apWlanRecvUnicastPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.1	Unsigned32	read-only	the field indicates the sum of received unicast packets.
U32 apWlanTransUnicastPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.2	Unsigned32	read-only	the field indicates the sum of transmitted unicast packets.
U32 apWlanRecvBroadcastPsacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.3	Unsigned32	read-only	the field indicates the sum of received broadcast packets.
U32 apWlanTransBroadcastPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.4	Unsigned32	read-only	the field indicates the sum of transmitted broadcast packets.
U32 apWlanRecvMulticastPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.5	Unsigned32	read-only	the field indicates the sum of received multicast packets.
U32 apWlanTransMulticastPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.6	Unsigned32	read-only	the field indicates the sum of transmitted multicast packets.
U32 apWlanRecvPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.7	Unsigned32	read-only	the field indicates the sum of received packets.
U32 apWlanTransPacket	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.8	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 apWlanRecvBytes	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.9	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 apWlanTransBytes	1.3.6.1.4.1.4526.4.3.1000.3.1.20.2.10	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
apPTMPallowList	1.3.6.1.4.1.4526.4.3.1000.3.1.27
PHY mac1	1.3.6.1.4.1.4526.4.3.1000.3.1.27.1	PhysAddress	read-write
PHY mac2	1.3.6.1.4.1.4526.4.3.1000.3.1.27.2	PhysAddress	read-write
PHY mac3	1.3.6.1.4.1.4526.4.3.1000.3.1.27.3	PhysAddress	read-write
PHY mac4	1.3.6.1.4.1.4526.4.3.1000.3.1.27.4	PhysAddress	read-write
apWirelessSecurityGroup	1.3.6.1.4.1.4526.4.3.1000.3.2
INT apSecuritySystem	1.3.6.1.4.1.4526.4.3.1000.3.2.1	INTEGER	read-write
INT ap802dot1xWEPKeySize	1.3.6.1.4.1.4526.4.3.1000.3.2.2	INTEGER	read-write
INT apWEPMode	1.3.6.1.4.1.4526.4.3.1000.3.2.3	INTEGER	read-write
apWEPKeysSet	1.3.6.1.4.1.4526.4.3.1000.3.2.4
apKeys24GSetTable	1.3.6.1.4.1.4526.4.3.1000.3.2.4.1		not-accessible
apKeys24GSetEntry	1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1		not-accessible
INT apKeysSetEnabled	1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1.1	INTEGER	read-write
OCT apKeys	1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1.2	OCTET STRING	read-write
STR apWPANetworkKey	1.3.6.1.4.1.4526.4.3.1000.3.2.6	DisplayString	read-write
INT apWPAEncryption	1.3.6.1.4.1.4526.4.3.1000.3.2.7	INTEGER	read-write
INT apWPAGroupKeyUpdate	1.3.6.1.4.1.4526.4.3.1000.3.2.10	INTEGER	read-write
INT apWPAGroupKeyLifetime	1.3.6.1.4.1.4526.4.3.1000.3.2.11	INTEGER	read-write
INT apWPAMembershipTerminatedGroupKeyUpdate	1.3.6.1.4.1.4526.4.3.1000.3.2.12	INTEGER	read-write
STR apPrimaryRadiusServer	1.3.6.1.4.1.4526.4.3.1000.3.2.13	DisplayString	read-write
INT apPrimaryRadiusPort	1.3.6.1.4.1.4526.4.3.1000.3.2.14	INTEGER	read-write	Radius Port
STR apPrimaryRadiusSharedKey	1.3.6.1.4.1.4526.4.3.1000.3.2.15	DisplayString	read-write	Radius Server Shared Key
STR apPrimaryRadiusAccountServer	1.3.6.1.4.1.4526.4.3.1000.3.2.16	DisplayString	read-write
INT apPrimaryRadiusAccountPort	1.3.6.1.4.1.4526.4.3.1000.3.2.17	INTEGER	read-write
STR apPrimaryRadiusAccountSharedKey	1.3.6.1.4.1.4526.4.3.1000.3.2.18	DisplayString	read-write	Radius Server Shared Key
STR apSecondaryRadiusServer	1.3.6.1.4.1.4526.4.3.1000.3.2.19	DisplayString	read-write
INT apSecondaryRadiusPort	1.3.6.1.4.1.4526.4.3.1000.3.2.20	INTEGER	read-write	Radius Port
STR apSecondaryRadiusSharedKey	1.3.6.1.4.1.4526.4.3.1000.3.2.21	DisplayString	read-write	Radius Server Shared Key
STR apSecondaryRadiusAccountServer	1.3.6.1.4.1.4526.4.3.1000.3.2.22	DisplayString	read-write
INT apSecondaryRadiusAccountPort	1.3.6.1.4.1.4526.4.3.1000.3.2.23	INTEGER	read-write
STR apSecondaryRadiusAccountSharedKey	1.3.6.1.4.1.4526.4.3.1000.3.2.24	DisplayString	read-write	Radius Server Shared Key
INT apReauthenticationTime	1.3.6.1.4.1.4526.4.3.1000.3.2.27	INTEGER	read-write

RFC description

Netgear WG102 802.11g wireless access point MIB for managing AP system and 2.4GHz radio configuration.

Start monitoring NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WG102-MIB

What Is WG102-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description