WG102-MIB :: apSSID

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WG102-MIB › apSSID

apSSID

Module: WG102-MIB

OID (symbolic): WG102-MIB::apSSID

OID (numeric): 1.3.6.1.4.1.4526.4.3.1000.3.1.4

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Wireless Access Point SSID This object value should be the same as IEEE 802.11 MIB dot11DesiredSSID

What is apSSID?

Sets the wireless network name (SSID) this access point broadcasts, the name that appears in a client's Wi-Fi network list; matches the standard 802.11 dot11DesiredSSID object.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.3.1000.3.1.4
snmpwalk -v2c -c public <target> WG102-MIB::apSSID

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.3.1000.3.1.4.1
snmpget -v2c -c public <target> WG102-MIB::apSSID.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.4.3.1000.3.1.4.1 s <value>

Start monitoring NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WG102-MIB::apSSID OID value, configure state conditions and alerts, and monitor any NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.4wirelessProductsNETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.3wg102Netgear-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.4.3.1000versionWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3wirelessAP24GGroupWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3.1apWirelessSettingGroupWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3.1.4apSSIDWG102-MIB