WG102

All MIBs › WG102

Organization: NETGEAR Inc.

Last Updated: 2006-11-15

Category: NETGEAR Wireless

Description: Defines NETGEAR WG102 802.11a/b/g wireless access point management objects for monitoring radio status and client associations.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WG102?

WG102 is NETGEAR's vendor-specific MIB for the WG102 802.11a/b/g ProSafe wireless access point, part of NETGEAR's enterprise wireless product line. It exposes radio-level configuration and status objects along with client association data, covering the wireless-specific hardware/software state of the AP rather than generic system data. Its monitoring value lies in confirming the radio subsystem's health and activity — signal/channel status of the 802.11 radio and the number/state of associated wireless clients — which helps an administrator spot a radio that has dropped offline or is oversubscribed with clients. As an enterprise-registered NETGEAR MIB (under the iso.org.dod.internet.private.enterprises.netgear.wireless.wg102 OID branch) it is self-contained but conceptually complements standard IEEE 802.11/dot11 MIB objects for wireless statistics. It is typically deployed in small-to-midsize office wireless deployments using NETGEAR ProSafe APs, polled by a wireless management console to track AP and client health. Network engineers evaluating or troubleshooting this functionality can download the WG102 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WG102. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NETGEAR WG102 ProSafe wireless access point

Monitoring Examples

An administrator would poll the radio status objects under the wg102 enterprise tree to confirm the 802.11b/g radio is up and operating on its configured channel, alerting if the radio unexpectedly goes offline. Client association tables would be checked to see the current number of associated wireless clients and flag an AP that has hit its client capacity, indicating a need to add another AP nearby. Because no explicit sample objects were captured for this module, exact table names are inferred from the MIB's stated purpose of monitoring radio status and client associations.

What Can Be Monitored

radio operational status
wireless channel
associated client count
client association state

Imported Objects

From RFC1155-SMI

TimeTicks

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
netgear	1.3.6.1.4.1.4526
wireless	1.3.6.1.4.1.4526.4
wg102	1.3.6.1.4.1.4526.4.3			The MIB module for 802.11b/g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wg102(3)
sysSettings	1.3.6.1.4.1.4526.4.3.1
STR sysMacAddress	1.3.6.1.4.1.4526.4.3.1.1	DisplayString	read-only	This field indicates the system MAC Address.
STR sysVersion	1.3.6.1.4.1.4526.4.3.1.2	DisplayString	read-only	This field indicates the system firmware version.
STR sysAPName	1.3.6.1.4.1.4526.4.3.1.3	DisplayString	read-write	This field indicates the name of AP. The name is also the NETBIOS name of the AP.
STR sysAdminName	1.3.6.1.4.1.4526.4.3.1.4	DisplayString	read-only	This field indicates the administrator name, which is used to sign in web GUI, SSH, CLI, and FTP server of the AP.
STR sysAdminPasswd	1.3.6.1.4.1.4526.4.3.1.5	DisplayString	read-only	This field indicates the administrator password, which is used to sign in web GUI, SSH, CLI, and FTP server of the AP.
INT sysCountryRegion	1.3.6.1.4.1.4526.4.3.1.7	INTEGER	read-write	This field indicates the country/region of the AP.
timeSettings	1.3.6.1.4.1.4526.4.3.1.8
STR timeCurrentTime	1.3.6.1.4.1.4526.4.3.1.8.1	DisplayString	read-only	This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss.
INT timeTimeZone	1.3.6.1.4.1.4526.4.3.1.8.2	INTEGER	read-write	This field indicates the timezone of the system. 0 UK,GreenWich,Casablanca,Monrovia (GMT), -12 Eniwetok,Kwajalein (GMT-12:00), -11 Midway I., Samoa (GMT-11:00), -10 Hawaii (GMT-10:00), -9.5 Marqesas Is. (GMT-09:30), -9 Alaska (GMT-09:00), -8.5 Pitciarn Is. (GMT-08:30), -8 Pacific Time ..US and Canada (GMT-08:00), -7 MountainTime(USA),Arizona (GMT-07:00), -6 CentralTime(USA),Mexico City,Tequciqalpa (GMT-06:00), -5 EasternTime(USA),Bogota,Lima,Quito,Indiana East (GMT-05:00), -4 Caracas,La Paz (GMT-04:00), -3.5 Newfoundland (GMT-03:30), -3 Brasilia,Beunos Aires,Georgetown (GMT-03:00), -2 Mid-Atlantic (GMT-02:00), -1 Azores,Cape Verde Is. (GMT-01:00), 1 Europe (GMT+01:00), 2 Egypt,Finland,Romania,Turkey,Greece,Israel,Jordan(GMT+02:00), 3 Iraq, Syria,Russia (GMT+03:00), 3.5 Iran (GMT+03:30), 4 Armenia, Azerbaijan (GMT+04:00), 4.5 Afghanistan (GMT+04:30), 5 Russia,Pakistan (GMT+05:00), 5.5 India (GMT+05:30), 6 Bangladesh,Russia (GMT+06:00), 6.5 Burma (GMT+06:30), 7 Russia,Thailand, Combodia, Laos (GMT+07:00), 8 Russia,China,Mongolia,Indonesia,Philippines,Taiwan,WA (GMT+08:00), 9 Russia,Japan,Korea (GMT+09:00), 9.5 Adelaide,Darwin (GMT+09:30), 10 Eastern Standard(Aust),Russia,Gaum,Papua New Guinea (GMT+10:00)
T/F timeDaylightSaving	1.3.6.1.4.1.4526.4.3.1.8.3	TruthValue	read-write	This field indicates whether the Daylight Saving time is used.
STR timeNtpServer	1.3.6.1.4.1.4526.4.3.1.8.4	DisplayString	read-write	This field indicates the hostname or IP address for the NTP server. If you want to use a custom NTP server, you can specify it for the Access Point. Otherwise, you can just leave it blank.
ipSettings	1.3.6.1.4.1.4526.4.3.1.9
T/F ipDhcpClientEnable	1.3.6.1.4.1.4526.4.3.1.9.1	TruthValue	read-write	This field indicates whether DHCP client is enabled.
IP ipIPAddress	1.3.6.1.4.1.4526.4.3.1.9.2	IpAddress	read-write	This field indicates the IP address of the AP.
IP ipNetmask	1.3.6.1.4.1.4526.4.3.1.9.3	IpAddress	read-write	This field indicates the netmask addressof the AP.
IP ipGateway	1.3.6.1.4.1.4526.4.3.1.9.4	IpAddress	read-write	This field indicates the default gateway address of the AP.
IP ipDnsServer	1.3.6.1.4.1.4526.4.3.1.9.5	IpAddress	read-write	This field indicates the IP address of the DNS server. *** Note: The value can only be set to an IP address in dot format.
wlanSettings	1.3.6.1.4.1.4526.4.3.2
wlanSettingTable	1.3.6.1.4.1.4526.4.3.2.1		not-accessible	wlanSettingsallow for multiple instances on an agent.
wlanSettingEntry	1.3.6.1.4.1.4526.4.3.2.1.1		not-accessible	An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT radioIndex	1.3.6.1.4.1.4526.4.3.2.1.1.1	INTEGER	read-only	This attribute shall indicate the radio's band.
T/F radioEnable	1.3.6.1.4.1.4526.4.3.2.1.1.2	TruthValue	read-write	This attribute shall indicate whether the radio is enabled.
INT wirelessMode	1.3.6.1.4.1.4526.4.3.2.1.1.5	INTEGER	read-write	This attribute shall indicate the desired wireless operating mode. Options are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11a - Only 802.11a wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
INT channel	1.3.6.1.4.1.4526.4.3.2.1.1.6	INTEGER	read-write	This attribute shall indicate the channel number to be used. And the zero indicates that auto channel selection is enabled.
INT txRate	1.3.6.1.4.1.4526.4.3.2.1.1.7	INTEGER	read-write	This attribute shall indicate the transmite rate. When the operatemode is: auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, and 54:54Mb/s. dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, 54:54Mb/s. dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, and 11:11 Mb/s. dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, 54:54Mb/s.
INT txPower	1.3.6.1.4.1.4526.4.3.2.1.1.8	INTEGER	read-write	This attribute shall indicate the transmitting power.
INT beaconInterval	1.3.6.1.4.1.4526.4.3.2.1.1.9	INTEGER	read-write	This attribute shall indicate the beacon interval.
INT dtimInterval	1.3.6.1.4.1.4526.4.3.2.1.1.10	INTEGER	read-write	This attribute shall indicate the DTIM period.
INT rtsThreshold	1.3.6.1.4.1.4526.4.3.2.1.1.11	INTEGER	read-write	This attribute shall indicate the RTS threshold.
INT fragmentationThreshold	1.3.6.1.4.1.4526.4.3.2.1.1.12	INTEGER	read-write	This attribute shall indicate the fragmentation threshold.
INT dot11bPreamble	1.3.6.1.4.1.4526.4.3.2.1.1.13	INTEGER	read-write	This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode.
T/F superMode	1.3.6.1.4.1.4526.4.3.2.1.1.14	TruthValue	read-write	This attribute shall indicate whether super mode (super-A for 11a radio, Super-G for 11g radio) is enabled.
T/F wmm	1.3.6.1.4.1.4526.4.3.2.1.1.15	TruthValue	read-write	This attribute shall indicate whether wmm is enabled.
T/F wmmNoAck	1.3.6.1.4.1.4526.4.3.2.1.1.16	TruthValue	read-write	This attribute shall indicate whether wmm with no ack is enabled.
T/F acEnabled	1.3.6.1.4.1.4526.4.3.2.1.1.17	TruthValue	read-write	This field indicates whether enable AutoCell.
INT acEnhancedRFSecurity	1.3.6.1.4.1.4526.4.3.2.1.1.18	INTEGER	read-write	This field indicates whether enable Enhanced RF Security.
T/F acRogueDevDetection	1.3.6.1.4.1.4526.4.3.2.1.1.19	TruthValue	read-write	This field indicates whether enable Rogue Device Detection.
INT accessControlMode	1.3.6.1.4.1.4526.4.3.2.1.1.20	INTEGER	read-write	The field indicates whether the access control list is enabled and the source of the database of the access control list.
wlanSecurityTable	1.3.6.1.4.1.4526.4.3.2.2		not-accessible	Security attributes in tablular form to allow for multiple instances on an agent.
wlanSecurityEntry	1.3.6.1.4.1.4526.4.3.2.2.1		not-accessible	An entry in the securityTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT securityProfileNo	1.3.6.1.4.1.4526.4.3.2.2.1.1	INTEGER	read-only	The field indicates the security profile NO.
T/F securityProfileEnabled	1.3.6.1.4.1.4526.4.3.2.2.1.2	TruthValue	read-write	This attribute shall indicate whether the security profile is enabled.
STR securityProfileName	1.3.6.1.4.1.4526.4.3.2.2.1.3	DisplayString	read-write	This attribute shall indicate SSID.
STR ssid	1.3.6.1.4.1.4526.4.3.2.2.1.4	DisplayString	read-write	This attribute shall indicate SSID.
T/F ssidBroadcastEnable	1.3.6.1.4.1.4526.4.3.2.2.1.5	TruthValue	read-write	This attribute shall indicate whether wireless network Name (SSID) will be broadcasted.
INT authentication	1.3.6.1.4.1.4526.4.3.2.2.1.6	INTEGER	read-write	The field indicates how to authenticate the station.
INT encryption	1.3.6.1.4.1.4526.4.3.2.2.1.7	INTEGER	read-write	The field indicates how to encryption the data and the type of WEP key.
STR wepKey1	1.3.6.1.4.1.4526.4.3.2.2.1.8	DisplayString	read-write	The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
STR wepKey2	1.3.6.1.4.1.4526.4.3.2.2.1.9	DisplayString	read-write	The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
STR wepKey3	1.3.6.1.4.1.4526.4.3.2.2.1.10	DisplayString	read-write	The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
STR wepKey4	1.3.6.1.4.1.4526.4.3.2.2.1.11	DisplayString	read-write	The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
INT wepKeyDefault	1.3.6.1.4.1.4526.4.3.2.2.1.12	INTEGER	read-write	The field shall indicate the WEP key number to encrypt TX data.
STR wpaPSK	1.3.6.1.4.1.4526.4.3.2.2.1.13	DisplayString	read-write	This attribute shall indicate WPA Pre-Shared Key.
T/F wlanSeparatorEnable	1.3.6.1.4.1.4526.4.3.2.2.1.14	TruthValue	read-write	This attribute shall indicate whether block the communications between two wireless clients.
INT wlanMaxUser	1.3.6.1.4.1.4526.4.3.2.2.1.15	INTEGER	read-write	This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited
wlanAccessControlLocalTable	1.3.6.1.4.1.4526.4.3.2.3		not-accessible	ACL attributes in tablular form to allow for multiple instances on an agent.
wlanAccessControlLocalEntry	1.3.6.1.4.1.4526.4.3.2.3.1		not-accessible	An entry in the wlanAccessControlListTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT aclIndex	1.3.6.1.4.1.4526.4.3.2.3.1.1	INTEGER	not-accessible	This field should indicate an index to the access control local database entry. When write this field aclIndex=9999, shall append new MAC address into the local database
STR aclMAC	1.3.6.1.4.1.4526.4.3.2.3.1.2	DisplayString	read-write	This field should indicate an MAC address entry in the access control local database. When write this field aclMAC=000000000000, shall remove current MAC address from local database. Otherwise, shall update the MAC address.
wlanWdsTable	1.3.6.1.4.1.4526.4.3.2.4		not-accessible	WDS attributes in tablular form to allow for multiple instances on an agent.
wlanWdsEntry	1.3.6.1.4.1.4526.4.3.2.4.1		not-accessible	An entry in the wlanWdsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT operationMode	1.3.6.1.4.1.4526.4.3.2.4.1.1	INTEGER	read-write	This attribute shall indicate the operation mode.
STR localMacAddress	1.3.6.1.4.1.4526.4.3.2.4.1.2	DisplayString	read-only	This attribute shall indicate the local MAC Address.
STR ptpRemoteMacAddress	1.3.6.1.4.1.4526.4.3.2.4.1.3	DisplayString	read-write	This attribute shall indicate the stationID.
STR pxpRemoteMacAddress1	1.3.6.1.4.1.4526.4.3.2.4.1.4	DisplayString	read-write	This attribute shall indicate the stationID.
STR pxpRemoteMacAddress2	1.3.6.1.4.1.4526.4.3.2.4.1.5	DisplayString	read-write	This attribute shall indicate the stationID.
STR pxpRemoteMacAddress3	1.3.6.1.4.1.4526.4.3.2.4.1.6	DisplayString	read-write	This attribute shall indicate the stationID.
STR pxpRemoteMacAddress4	1.3.6.1.4.1.4526.4.3.2.4.1.7	DisplayString	read-write	This attribute shall indicate the stationID.
STR repeaterParentMacAddress	1.3.6.1.4.1.4526.4.3.2.4.1.8	DisplayString	read-write	This attribute shall indicate the stationID.
STR repeaterChildMacAddress	1.3.6.1.4.1.4526.4.3.2.4.1.9	DisplayString	read-write	This attribute shall indicate the stationID.
wlanClientsTable	1.3.6.1.4.1.4526.4.3.2.5		not-accessible	wireless clients attributes in tablular form to allow for multiple instances on an agent.
wlanClientsEntry	1.3.6.1.4.1.4526.4.3.2.5.1		not-accessible	An entry in the wlanClientsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT clientIndex	1.3.6.1.4.1.4526.4.3.2.5.1.1	INTEGER	read-only	This attribute shall indicate sequence number (ID) of the associated station.
STR clientMacAddress	1.3.6.1.4.1.4526.4.3.2.5.1.2	DisplayString	read-only	This attribute shall indicate MAC address of the associated stationID.
IP clientIP	1.3.6.1.4.1.4526.4.3.2.5.1.3	IpAddress	read-only	This attribute shall indicate the IP address of the associated stationID.
STR clientSSID	1.3.6.1.4.1.4526.4.3.2.5.1.4	DisplayString	read-only	This attribute shall indicate the SSID that the wireless client associates to.
INT clientStatus	1.3.6.1.4.1.4526.4.3.2.5.1.5	INTEGER	read-only	This attribute shall indicate the status of the associated stationID.
wlanUnknownApTable	1.3.6.1.4.1.4526.4.3.2.6		not-accessible	wireless Unknown AP attributes in tablular form to allow for multiple instances on an agent.
wlanUnknownApEntry	1.3.6.1.4.1.4526.4.3.2.6.1		not-accessible	An entry in the wlanUnknownApTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT unknowApIndex	1.3.6.1.4.1.4526.4.3.2.6.1.1	INTEGER	read-only	This attribute shall indicate sequence number (ID) of the detected unknow AP.
T/F unknowApAuthorize	1.3.6.1.4.1.4526.4.3.2.6.1.2	TruthValue	read-write	This attribute is used to authorize the AP to the authorized AP List.
STR unknowApSSID	1.3.6.1.4.1.4526.4.3.2.6.1.3	DisplayString	read-only	This attribute shall indicate the SSID of the AP.
STR unknowApMacAddress	1.3.6.1.4.1.4526.4.3.2.6.1.4	DisplayString	read-only	This attribute shall indicate MAC address of the AP.
STR unknowApChannel	1.3.6.1.4.1.4526.4.3.2.6.1.5	DisplayString	read-only	This attribute shall indicate the channel number of the AP.
STR unknowApAutoCellEnabled	1.3.6.1.4.1.4526.4.3.2.6.1.6	DisplayString	read-only	This attribute shall indicate whether the AutoCell is enabled on the AP or not.
wlanAuthorizedApTable	1.3.6.1.4.1.4526.4.3.2.7		not-accessible	wireless Authorized AP attributes in tablular form to allow for multiple instances on an agent.
wlanAuthorizedApEntry	1.3.6.1.4.1.4526.4.3.2.7.1		not-accessible	An entry in the wlanAuthorizedApTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT authorizedApIndex	1.3.6.1.4.1.4526.4.3.2.7.1.1	INTEGER	read-only	This attribute shall indicate sequence number (ID) of the detected authorized AP.
T/F authorizedApDelete	1.3.6.1.4.1.4526.4.3.2.7.1.2	TruthValue	read-write	This attribute is used to delete the AP from authorized AP List.
STR authorizedApSSID	1.3.6.1.4.1.4526.4.3.2.7.1.3	DisplayString	read-only	This attribute shall indicate the SSID of the AP.
STR authorizedApMacAddress	1.3.6.1.4.1.4526.4.3.2.7.1.4	DisplayString	read-only	This attribute shall indicate MAC address of the AP.
STR authorizedApChannel	1.3.6.1.4.1.4526.4.3.2.7.1.5	DisplayString	read-only	This attribute shall indicate the channel number of the AP.
STR authorizedApAutoCellEnabled	1.3.6.1.4.1.4526.4.3.2.7.1.6	DisplayString	read-only	This attribute shall indicate whether the AutoCell is enabled on the AP or not.
wlanUnknownStationTable	1.3.6.1.4.1.4526.4.3.2.8		not-accessible	wireless Unknown Station attributes in tablular form to allow for multiple instances on an agent.
wlanUnknownStationEntry	1.3.6.1.4.1.4526.4.3.2.8.1		not-accessible	An entry in the wlanUnknownStationTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT unknowStationIndex	1.3.6.1.4.1.4526.4.3.2.8.1.1	INTEGER	read-only	This attribute shall indicate sequence number (ID) of the detected unknow Station.
T/F unknowStationAuthorize	1.3.6.1.4.1.4526.4.3.2.8.1.2	TruthValue	read-write	This attribute is used to authorize the Station to the authorized Station List.
STR unknowStationMacAddress	1.3.6.1.4.1.4526.4.3.2.8.1.3	DisplayString	read-only	This attribute shall indicate MAC address of the Station.
STR unknowStationChannel	1.3.6.1.4.1.4526.4.3.2.8.1.4	DisplayString	read-only	This attribute shall indicate the channel number of the Station.
STR unknowStationAutoCellEnabled	1.3.6.1.4.1.4526.4.3.2.8.1.5	DisplayString	read-only	This attribute shall indicate whether the AutoCell is enabled on the Station or not.
wlanAuthorizedStationTable	1.3.6.1.4.1.4526.4.3.2.9		not-accessible	wireless Authorized Station attributes in tablular form to allow for multiple instances on an agent.
wlanAuthorizedStationEntry	1.3.6.1.4.1.4526.4.3.2.9.1		not-accessible	An entry in the wlanAuthorizedStationTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT authorizedStationIndex	1.3.6.1.4.1.4526.4.3.2.9.1.1	INTEGER	read-only	This attribute shall indicate sequence number (ID) of the detected authorized Station.
T/F authorizedStationDelete	1.3.6.1.4.1.4526.4.3.2.9.1.2	TruthValue	read-write	This attribute is used to delete the Station from authorized Station List.
STR authorizedStationMacAddress	1.3.6.1.4.1.4526.4.3.2.9.1.3	DisplayString	read-only	This attribute shall indicate MAC address of the Station.
STR authorizedStationChannel	1.3.6.1.4.1.4526.4.3.2.9.1.4	DisplayString	read-only	This attribute shall indicate the channel number of the Station.
STR authorizedStationAutoCellEnabled	1.3.6.1.4.1.4526.4.3.2.9.1.5	DisplayString	read-only	This attribute shall indicate whether the AutoCell is enabled on the Station or not.
vlanSettings	1.3.6.1.4.1.4526.4.3.3
T/F vlanEnable	1.3.6.1.4.1.4526.4.3.3.1	TruthValue	read-write	This attribute shall indicate whether vlan(802.1Q) is enabled.
INT managementVlanId	1.3.6.1.4.1.4526.4.3.3.2	INTEGER	read-write	This attribute shall indicate the management VLAN ID.
securityProfileVlanTable	1.3.6.1.4.1.4526.4.3.3.3		not-accessible	Description.
securityProfileVlanEntry	1.3.6.1.4.1.4526.4.3.3.3.1		not-accessible	Description.
INT profileNo	1.3.6.1.4.1.4526.4.3.3.3.1.1	INTEGER	read-only	the field indicates the security profile NO.
INT profileVlan	1.3.6.1.4.1.4526.4.3.3.3.1.2	INTEGER	read-write	the field indicates the security profile's VLAN.
sysStatistics	1.3.6.1.4.1.4526.4.3.4
ethernetStat	1.3.6.1.4.1.4526.4.3.4.1
U32 ethInPackets	1.3.6.1.4.1.4526.4.3.4.1.1	Unsigned32	read-only	the field indicates the sum of received packets.
U32 ethOutPackets	1.3.6.1.4.1.4526.4.3.4.1.2	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 ethInBytes	1.3.6.1.4.1.4526.4.3.4.1.3	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 ethOutBytes	1.3.6.1.4.1.4526.4.3.4.1.4	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
wirelessStatTable	1.3.6.1.4.1.4526.4.3.4.2		not-accessible	Description.
wirelessStatEntry	1.3.6.1.4.1.4526.4.3.4.2.1		not-accessible	Description.
INT wlanSecurityProfileNo	1.3.6.1.4.1.4526.4.3.4.2.1.1	INTEGER	read-only	the field indicates the security profile NO.
U32 wlanInPacketsUnicast	1.3.6.1.4.1.4526.4.3.4.2.1.2	Unsigned32	read-only	the field indicates the sum of received unicast packets.
U32 wlanOutPacketsUnicast	1.3.6.1.4.1.4526.4.3.4.2.1.3	Unsigned32	read-only	the field indicates the sum of transmitted unicast packets.
U32 wlanInPacketsBroadcast	1.3.6.1.4.1.4526.4.3.4.2.1.4	Unsigned32	read-only	the field indicates the sum of received broadcast packets.
U32 wlanOutPacketsBroadcast	1.3.6.1.4.1.4526.4.3.4.2.1.5	Unsigned32	read-only	the field indicates the sum of transmitted broadcast packets.
U32 wlanInPacketsMulticast	1.3.6.1.4.1.4526.4.3.4.2.1.6	Unsigned32	read-only	the field indicates the sum of received multicast packets.
U32 wlanOutPacketsMulticast	1.3.6.1.4.1.4526.4.3.4.2.1.7	Unsigned32	read-only	the field indicates the sum of transmitted multicast packets.
U32 wlanInPacketsTotal	1.3.6.1.4.1.4526.4.3.4.2.1.8	Unsigned32	read-only	the field indicates the sum of received packets.
U32 wlanOutPacketsTotal	1.3.6.1.4.1.4526.4.3.4.2.1.9	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 wlanInBytesTotal	1.3.6.1.4.1.4526.4.3.4.2.1.10	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 wlanOutBytesTotal	1.3.6.1.4.1.4526.4.3.4.2.1.11	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
U32 ethWrongPackets	1.3.6.1.4.1.4526.4.3.4.3	Unsigned32	read-only	the field indicates the sum of wrong Ethernet packets.
U32 wrongWLANSTAPackets	1.3.6.1.4.1.4526.4.3.4.4	Unsigned32	read-only	the field indicates the sum of wrong wireless station packets.
U32 wlanStationCount	1.3.6.1.4.1.4526.4.3.4.5	Unsigned32	read-only	the field indicates the number of stations.
wirelessLinkStatTable	1.3.6.1.4.1.4526.4.3.4.6		not-accessible	The table is for wireless clients association request, successful associated, granted access and aggregative clients disconnection with date & time section and read flag information.
wirelessLinkStatEntry	1.3.6.1.4.1.4526.4.3.4.6.1		not-accessible	Providing entries for wirelessLinkStatTable
INT wirelessLinkStatIndex	1.3.6.1.4.1.4526.4.3.4.6.1.1	INTEGER	read-only	This field indicates the index of this statistic records.
STR wirelessLinkStatDate	1.3.6.1.4.1.4526.4.3.4.6.1.2	DisplayString	read-only	This field indicates the date of this statistic record in the format: YYYY/MM/DD.
INT wirelessLinkStatTime	1.3.6.1.4.1.4526.4.3.4.6.1.3	INTEGER	read-only	This field indicates the time slice of this statistic record. Total 24 time slice are defined in one day, such as time scale 0 is from 12am to 1am, time scale 1 is from 1am to 2 am, and so forth
U32 wirelessLinkStatRequest	1.3.6.1.4.1.4526.4.3.4.6.1.4	Unsigned32	read-only	This field indicates the statistic of Association Request to the AP.
U32 wirelessLinkStatResponse	1.3.6.1.4.1.4526.4.3.4.6.1.5	Unsigned32	read-only	This field indicates the statistic of Association Response sent by the AP.
U32 wirelessLinkStatGrant	1.3.6.1.4.1.4526.4.3.4.6.1.6	Unsigned32	read-only	This field indicates the statistic of Successful Association with the AP.
U32 wirelessLinkStatDisconnect	1.3.6.1.4.1.4526.4.3.4.6.1.7	Unsigned32	read-only	This field indicates the statistic how many AP detects clients disconnection due to timeout.
U32 wirelessLinkStatDisconnectAll	1.3.6.1.4.1.4526.4.3.4.6.1.8	Unsigned32	read-only	This field indicates the statistic that the AP detects all wireless clients (>1) disconnecting within 1 second
T/F wirelessLinkStatFlag	1.3.6.1.4.1.4526.4.3.4.6.1.9	TruthValue	read-write	This field indicates if the network management system has already read this record. When network management system read the record successfully, it should set it to 1. If this field is set to be 1, the record will be deleted if the time slice is over.
U32 wlanAuthenticatedStationCount	1.3.6.1.4.1.4526.4.3.4.8	Unsigned32	read-only	The field indicates the number of stations that 802.1x authenticated.
U32 sysTotalMemory	1.3.6.1.4.1.4526.4.3.4.9	Unsigned32	read-only	The field indicates the total memory size of the system.
U32 sysFreeMemory	1.3.6.1.4.1.4526.4.3.4.10	Unsigned32	read-only	The field indicates the current free memory size of the system.
TIK sysRuntime	1.3.6.1.4.1.4526.4.3.4.11	TimeTicks	read-only	The field indicates the time (in hundredths of a second) since the system was last re-initialized.
radiusSettings	1.3.6.1.4.1.4526.4.3.5
radiusAuthPrimaryServer	1.3.6.1.4.1.4526.4.3.5.1
IP radiusAuthPrimaryServerIP	1.3.6.1.4.1.4526.4.3.5.1.1	IpAddress	read-write	This field shall indicate the primary authentication RADIUS server IP address.
INT radiusAuthPrimaryServerPort	1.3.6.1.4.1.4526.4.3.5.1.2	INTEGER	read-write	This field shall indicate the primary authentication RADIUS server port number. Default: 1812.
STR radiusAuthPrimaryServerSecret	1.3.6.1.4.1.4526.4.3.5.1.3	DisplayString	read-write	This field shall indicate the primary authentication RADIUS server shared secret string.
radiusAuthSecondaryServer	1.3.6.1.4.1.4526.4.3.5.2
IP radiusAuthSecondaryServerIP	1.3.6.1.4.1.4526.4.3.5.2.1	IpAddress	read-write	This field shall indicate the secondary authentication RADIUS server IP address.
INT radiusAuthSecondaryServerPort	1.3.6.1.4.1.4526.4.3.5.2.2	INTEGER	read-write	This field shall indicate the secondary authentication RADIUS server port number. Default: 1812.
STR radiusAuthSecondaryServerSecret	1.3.6.1.4.1.4526.4.3.5.2.3	DisplayString	read-write	This field shall indicate the secondary authentication RADIUS server shared secret string.
authenticationSettings	1.3.6.1.4.1.4526.4.3.5.3
INT reauthTime	1.3.6.1.4.1.4526.4.3.5.3.1	INTEGER	read-write	This attribute shall indicate 802.1x reauth time.
INT wpaGroupKeyUpdateCondition	1.3.6.1.4.1.4526.4.3.5.3.2	INTEGER	read-write	This attribute shall indicate WPA group key update condition.
INT wpaGroupKeyUpdateIntervalSecond	1.3.6.1.4.1.4526.4.3.5.3.3	INTEGER	read-write	This fields indicates the wpa keyupdate sec interval.
radiusAccountPrimaryServer	1.3.6.1.4.1.4526.4.3.5.4
IP radiusAccountPrimaryServerIP	1.3.6.1.4.1.4526.4.3.5.4.1	IpAddress	read-write	This field shall indicate the primary account RADIUS server IP address.
INT radiusAccountPrimaryServerPort	1.3.6.1.4.1.4526.4.3.5.4.2	INTEGER	read-write	This field shall indicate the primary account RADIUS server port number. Default: 1813.
STR radiusAccountPrimaryServerSecret	1.3.6.1.4.1.4526.4.3.5.4.3	DisplayString	read-write	This field shall indicate the primary account RADIUS server shared secret string.
radiusAccountSecondaryServer	1.3.6.1.4.1.4526.4.3.5.5
IP radiusAccountSecondaryServerIP	1.3.6.1.4.1.4526.4.3.5.5.1	IpAddress	read-write	This field shall indicate the secondary account RADIUS server IP address.
INT radiusAccountSecondaryServerPort	1.3.6.1.4.1.4526.4.3.5.5.2	INTEGER	read-write	This field shall indicate the secondary account RADIUS server port number. Default: 1813.
STR radiusAccountSecondaryServerSecret	1.3.6.1.4.1.4526.4.3.5.5.3	DisplayString	read-write	This field shall indicate the secondary account RADIUS server shared secret string.
hotspotSettings	1.3.6.1.4.1.4526.4.3.6
T/F httpRedirectEnable	1.3.6.1.4.1.4526.4.3.6.1	TruthValue	read-write	This attribute shall indicate whether the HTTP redirect is enabled.
STR httpRedirectUrl	1.3.6.1.4.1.4526.4.3.6.2	DisplayString	read-write	This attribute shall indicate http redirect URL.
syslogSettings	1.3.6.1.4.1.4526.4.3.7
T/F syslogEnable	1.3.6.1.4.1.4526.4.3.7.1	TruthValue	read-write	This attribute shall indicate whether the syslog is enabled.
IP syslogServerIP	1.3.6.1.4.1.4526.4.3.7.2	IpAddress	read-write	This attributes shall indicates the IP address of the syslog server. ***The value can only be set to an IP address in dot format.
INT syslogServerPort	1.3.6.1.4.1.4526.4.3.7.3	INTEGER	read-write	This attributes shall indicates the Port of the Syslog server.
remoteMgmtSettings	1.3.6.1.4.1.4526.4.3.8
T/F snmpEnable	1.3.6.1.4.1.4526.4.3.8.1	TruthValue	read-write	This attribute shall indicate whether the SNMP agent is enabled.
IP snmpManageIP	1.3.6.1.4.1.4526.4.3.8.2	IpAddress	read-write	The field indicates the SNMP manage IP address. ***The value can only be set to an IP address in dot format.
IP snmpTrapServerIP	1.3.6.1.4.1.4526.4.3.8.3	IpAddress	read-write	The field indicates the SNMP trap server IP address. ***The value can only be set to an IP address in dot format.
STR snmpReadCommunity	1.3.6.1.4.1.4526.4.3.8.4	DisplayString	read-write	The field indicates the SNMP read only community name. ***The value can only be set to 1 to 32 readable string.
STR snmpWriteCommunity	1.3.6.1.4.1.4526.4.3.8.5	DisplayString	read-write	The field indicates the SNMP read write community name. ***The value can only be set to 1 to 32 readable string.
INT snmpTrapPort	1.3.6.1.4.1.4526.4.3.8.6	INTEGER	read-write	This field shall indicate the port for trap. Default: 162.
T/F mgmtWebAccessCtrl	1.3.6.1.4.1.4526.4.3.8.8	TruthValue	read-write	This attribute shall allow you to turn the WEB access control on or off.
STR mgmtWebIPSubnet1	1.3.6.1.4.1.4526.4.3.8.9	DisplayString	read-write	The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
STR mgmtWebIPSubnet2	1.3.6.1.4.1.4526.4.3.8.10	DisplayString	read-write	The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
STR mgmtWebIPSubnet3	1.3.6.1.4.1.4526.4.3.8.11	DisplayString	read-write	The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
STR mgmtWebIPSubnet4	1.3.6.1.4.1.4526.4.3.8.12	DisplayString	read-write	The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
STR mgmtWebIPSubnet5	1.3.6.1.4.1.4526.4.3.8.13	DisplayString	read-write	The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
STR mgmtWebIPSubnet6	1.3.6.1.4.1.4526.4.3.8.14	DisplayString	read-write	The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
STR mgmtWebIPSubnet7	1.3.6.1.4.1.4526.4.3.8.15	DisplayString	read-write	The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
STR mgmtWebIPSubnet8	1.3.6.1.4.1.4526.4.3.8.16	DisplayString	read-write	The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
auxCommand	1.3.6.1.4.1.4526.4.3.9
T/F resetAP	1.3.6.1.4.1.4526.4.3.9.1	TruthValue	read-write	This a command field for conntrol AP action. Write any value to reset the AP.
T/F resetToFactoryDefault	1.3.6.1.4.1.4526.4.3.9.2	TruthValue	read-write	This a command field for conntrol AP action. Write any value to reset the Access Point to the original factory default settings.

RFC description

MIB for NETGEAR WG102 802.11b/g wireless access point management and configuration.

Start monitoring NETGEAR wireless access points with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WG102

What Is WG102?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description