apRebootNow

OID (symbolic): WG102-MIB::apRebootNow

OID (numeric): 1.3.6.1.4.1.4526.4.3.1000.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this object to true(1) causes the device to reset. Reading this object always returns false(2).

What is apRebootNow?

Setting this object to reboot(1) immediately reboots the access point; reading it always returns not-reboot(0) regardless of device state, since it's a momentary trigger rather than a status flag.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.3.1000.2.1
snmpwalk -v2c -c public <target> WG102-MIB::apRebootNow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.3.1000.2.1.1
snmpget -v2c -c public <target> WG102-MIB::apRebootNow.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.4.3.1000.2.1.1 i <value>

Start monitoring NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WG102-MIB::apRebootNow OID value, configure state conditions and alerts, and monitor any NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.4526	netgear	FSM726S-MIB
1.3.6.1.4.1.4526.4	wirelessProducts	NETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.3	wg102	Netgear-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.4526.4.3.1000	version	WG102-MIB
1.3.6.1.4.1.4526.4.3.1000.2	wirelessAPManageGroup	WG102-MIB
1.3.6.1.4.1.4526.4.3.1000.2.1	apRebootNow	WG102-MIB

WG102-MIB :: apRebootNow

apRebootNow

Module

This MIB depends on