WG102-MIB :: apKeys

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WG102-MIB › apKeys

apKeys

Module: WG102-MIB

OID (symbolic): WG102-MIB::apKeys

OID (numeric): 1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

What is apKeys?

Sets the WEP key value, up to 13 bytes matching 64/128-bit WEP key lengths, for this key slot on the 2.4GHz radio.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1.2
snmpwalk -v2c -c public <target> WG102-MIB::apKeys

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1.2.1
snmpget -v2c -c public <target> WG102-MIB::apKeys.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1.2.1 s <value>

Start monitoring NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WG102-MIB::apKeys OID value, configure state conditions and alerts, and monitor any NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.4wirelessProductsNETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.3wg102Netgear-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.4.3.1000versionWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3wirelessAP24GGroupWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3.2apWirelessSecurityGroupWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3.2.4apWEPKeysSetWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3.2.4.1apKeys24GSetTableWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1apKeys24GSetEntryWG102-MIB
1.3.6.1.4.1.4526.4.3.1000.3.2.4.1.1.2apKeysWG102-MIB