WG302-MIB

All MIBs › WG302-MIB

Organization: NETGEAR Inc.

Last Updated: 2004-11-03

Category: NETGEAR Wireless

Description: Manages NETGEAR WG302 wireless access point settings, radio channel configuration, and associated client statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WG302-MIB?

WG302-MIB is Netgear's enterprise-specific MIB (netgear.wireless.accesspoint OID branch) for managing the ProSafe WG302, a dual-band 802.11a/b/g wireless access point. It exposes configuration data such as device/admin identity, DHCP and static IP/netmask/gateway settings, DNS servers, spanning tree state, wireless LAN settings, and remote-management settings, along with client/traffic statistics. It supports monitoring of the AP's hardware and software operational status through its network configuration objects (confirming correct addressing and reachability) and its statistic objects (revealing wireless traffic and client load), effectively serving as the AP's health and configuration snapshot. As a self-contained Netgear enterprise module it does not lean on IETF standard MIBs like IF-MIB, defining its own apName/ipAddr-style object set instead. It is deployed in small-to-medium business wireless networks, where WG302-MIB SNMP monitoring lets administrators remotely verify and troubleshoot WG302 access points' network settings and wireless activity.

IPNetwork Monitor allows you to monitor SNMP objects defined in WG302-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NETGEAR ProSafe WG302 wireless access point

Monitoring Examples

An admin would poll apName and ipAddr/netmaskAddr/gatewayAddr to confirm the AP is reachable at its expected address, and dhcpStatus to verify whether it obtained its address via DHCP or static configuration. The wlanSettingTable/wlanSettingEntry would be checked to confirm radio and SSID configuration is as expected, while the statistic object is watched for traffic anomalies such as a sudden drop in client activity. If spantree state is unexpectedly disabled on a bridged deployment, it could indicate a misconfiguration risking a network loop.

What Can Be Monitored

device/admin identity and IP configuration
DHCP status
DNS server settings
spanning tree state
wireless LAN/radio settings
traffic/client statistics

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
netgear	1.3.6.1.4.1.4526
wireless	1.3.6.1.4.1.4526.4
accesspoint	1.3.6.1.4.1.4526.4.2			The MIB module for 802.11g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).accesspoint(2)
lanSettings	1.3.6.1.4.1.4526.4.2.1
STR apName	1.3.6.1.4.1.4526.4.2.1.1	DisplayString	read-write	The field indicates the name of AP.
STR adminName	1.3.6.1.4.1.4526.4.2.1.2	DisplayString	not-accessible	The field indicates the administrator name.
STR adminPasswd	1.3.6.1.4.1.4526.4.2.1.3	DisplayString	not-accessible	The field indicates the administrator password. The AP can be managed in such way as utility,telnet and so on.
INT dhcpStatus	1.3.6.1.4.1.4526.4.2.1.4	INTEGER	read-write	This attribute shall indicate whether dhcp client status.
IP netmaskAddr	1.3.6.1.4.1.4526.4.2.1.6	IpAddress	read-write	The field indicates the netmask of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same netmask address,when worked in bridge mode.
IP gatewayAddr	1.3.6.1.4.1.4526.4.2.1.7	IpAddress	read-write	The field indicates the gateway of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same gateway address,when worked in bridge mode.
T/F spantree	1.3.6.1.4.1.4526.4.2.1.8	TruthValue	read-write	This attribute shall indicate spanning tree.
IP pridnsipAddr	1.3.6.1.4.1.4526.4.2.1.9	IpAddress	read-write	This attributes shall indicates the IP address of the primary DNS server. ***The value can only be set to an IP address in dot format.
IP snddnsipAddr	1.3.6.1.4.1.4526.4.2.1.10	IpAddress	read-write	This attributes shall indicates the IP address of the secondary DNS server. ***The value can only be set to an IP address in dot format.
wlanSettingTable	1.3.6.1.4.1.4526.4.2.2		not-accessible	wlanSettingsallow for multiple instances on an agent.
wlanSettingEntry	1.3.6.1.4.1.4526.4.2.2.1		not-accessible	An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT operatemode	1.3.6.1.4.1.4526.4.2.2.1.1	INTEGER	read-write	This attribute shall indicate the desired wireless operating mode. The option are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
STR ssid	1.3.6.1.4.1.4526.4.2.2.1.2	DisplayString	read-write	This attribute shall indicate SSID.Its length can't be large than 33 .
INT countrycode	1.3.6.1.4.1.4526.4.2.2.1.3	INTEGER	read-write	This attribute shall indicate the region of operation for which which the wireless interface is inted. =410: asia =36: australia =124: canada =208: denmark =40: europe =246: finland =250: france =276: germany =372: ireland =380: italy =392: japan =484: mexico =528: netherlands =554: new zealand =578: norway =630: puerto rico =756: switzerland =340: south america =724: spain =752: sweden =826: unitedKingdom =840: usa
INT channel	1.3.6.1.4.1.4526.4.2.2.1.4	INTEGER	read-write	This attribute shall indicate the channel number to use on your Wireless LAN. 1: CH01 2412MHz 2: CH02 2417MHz 3: CH03 2422MHz 4: CH04 2427MHz 5: CH05 2432MHz 6: CH06 2437MHz 7: CH07 2442MHz 8: CH08 2447MHz 9: CH09 2452MHz 10: CH10 2457MHz 11: CH11 2462MHz 12: CH12 2467MHz 13: CH13 2472MHz 14: CH14 2484MHz The default value is 11.
STR datarate	1.3.6.1.4.1.4526.4.2.2.1.5	DisplayString	read-write	This attribute shall indicate the transmite rate. When operatemode is auto(0) can set to 0:best,1:1Mb/s,2:2Mb/s, 5.5:5.5Mb/s,11:11 Mb/s, 6:6Mb/s,9: 9Mb/s,12:12Mb/s,18:8Mb/s,24:24Mb/s 36:36Mb/s,48:48Mb/s,54:54Mb/s . When operatemode is dot11b(2) can set to 0:best,1:1Mb/s,2:2Mb/s,5.5:5.5Mb/s,11:11 Mb/s. When operatemode is dot11g(3) can set to 0:best,6:6Mb/s,9:9Mb/s,12:12Mb/s,18:18Mb/s,24:24Mb/s 36:36Mb/s,48:48Mb/s,54:54Mb/s,108:108Mb/s.
INT beaconinterval	1.3.6.1.4.1.4526.4.2.2.1.6	INTEGER	read-write	This attribute shall indicate the Beacon Interval.
INT rtsthreshold	1.3.6.1.4.1.4526.4.2.2.1.7	INTEGER	read-write	This attribute shall indicate the RTS threshold.
INT fraglength	1.3.6.1.4.1.4526.4.2.2.1.8	INTEGER	read-write	This attribute shall indicate the fragmentation threshold.
INT dtiminterval	1.3.6.1.4.1.4526.4.2.2.1.9	INTEGER	read-write	This attribute shall indicate the DTIM period.
INT preambletype	1.3.6.1.4.1.4526.4.2.2.1.10	INTEGER	read-write	This attribute shall indicate the preamble setting.
T/F hidenetworkname	1.3.6.1.4.1.4526.4.2.2.1.11	TruthValue	read-write	This attribute shall indicate whether broadcast wireless network Name (SSID).
INT txpower	1.3.6.1.4.1.4526.4.2.2.1.12	INTEGER	read-write	This attribute shall indicate the tranmiste power.
T/F superG	1.3.6.1.4.1.4526.4.2.2.1.13	TruthValue	read-write	This attribute shall indicate whether super-G.
INT antenna	1.3.6.1.4.1.4526.4.2.2.1.14	INTEGER	read-write	This attribute shall indicate the tranmiste power.
securityTable	1.3.6.1.4.1.4526.4.2.3		not-accessible	Security attributes. In tablular form to allow for multiple instances on an agent.
securityEntry	1.3.6.1.4.1.4526.4.2.3.1		not-accessible	An entry in the securityTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT authenticationtype	1.3.6.1.4.1.4526.4.2.3.1.1	INTEGER	read-write	The field indicates how to authenticate the station.
INT encryption	1.3.6.1.4.1.4526.4.2.3.1.2	INTEGER	read-write	The field indicates how to encryption the station.
INT encryptionstrength	1.3.6.1.4.1.4526.4.2.3.1.3	INTEGER	read-write	The field indicates the key length of default keys.
INT keyno	1.3.6.1.4.1.4526.4.2.3.1.4	INTEGER	read-write	The field indicates the number of default wep key.
STR key1	1.3.6.1.4.1.4526.4.2.3.1.5	DisplayString	read-write	The field indicates the key value of the first default wep key.
STR key2	1.3.6.1.4.1.4526.4.2.3.1.6	DisplayString	read-write	The field indicates the key value of the second default wep key.
STR key3	1.3.6.1.4.1.4526.4.2.3.1.7	DisplayString	read-write	The field indicates the key value of the third default wep key.
STR key4	1.3.6.1.4.1.4526.4.2.3.1.8	DisplayString	read-write	The field indicates the key value of the fourth default wep key.
T/F wlanseparator	1.3.6.1.4.1.4526.4.2.3.1.9	TruthValue	read-write	This attribute shall indicate whether enable No see.
STR presharekey	1.3.6.1.4.1.4526.4.2.3.1.10	DisplayString	read-write	This attribute shall indicate preshare key.
remoteSettings	1.3.6.1.4.1.4526.4.2.4
T/F sshd	1.3.6.1.4.1.4526.4.2.4.1	TruthValue	read-write	This attribute shall indicate whether enable sshd.
T/F snmpenable	1.3.6.1.4.1.4526.4.2.4.2	TruthValue	read-write	This attribute shall indicate whether enable snmp.
IP trapServerIP	1.3.6.1.4.1.4526.4.2.4.3	IpAddress	read-write	The field indicates the trap server IP address. ***The value can only be set to a IP address in dot format.
STR readOnlyCommunity	1.3.6.1.4.1.4526.4.2.4.4	DisplayString	read-write	The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string.
STR readWriteCommunity	1.3.6.1.4.1.4526.4.2.4.5	DisplayString	read-write	The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string.
statistic	1.3.6.1.4.1.4526.4.2.5
wiredethernetstat	1.3.6.1.4.1.4526.4.2.5.1
U32 lanrecvpacket	1.3.6.1.4.1.4526.4.2.5.1.1	Unsigned32	read-only	the field indicates the sum of received packets.
U32 lantranspacket	1.3.6.1.4.1.4526.4.2.5.1.2	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 lanrecvbytes	1.3.6.1.4.1.4526.4.2.5.1.3	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 lantransbytes	1.3.6.1.4.1.4526.4.2.5.1.4	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
wirelessstat	1.3.6.1.4.1.4526.4.2.5.2
U32 wlanrecvunicastpacket	1.3.6.1.4.1.4526.4.2.5.2.1	Unsigned32	read-only	the field indicates the sum of received unicast packets.
U32 wlantransunicastpacket	1.3.6.1.4.1.4526.4.2.5.2.2	Unsigned32	read-only	the field indicates the sum of transmitted unicast packets.
U32 wlanrecvbroadcastpacket	1.3.6.1.4.1.4526.4.2.5.2.3	Unsigned32	read-only	the field indicates the sum of received broadcast packets.
U32 wlantransbroadcastpacket	1.3.6.1.4.1.4526.4.2.5.2.4	Unsigned32	read-only	the field indicates the sum of transmitted broadcast packets.
U32 wlanrecvmulticastpacket	1.3.6.1.4.1.4526.4.2.5.2.5	Unsigned32	read-only	the field indicates the sum of received multicast packets.
U32 wlantransmulticastpacket	1.3.6.1.4.1.4526.4.2.5.2.6	Unsigned32	read-only	the field indicates the sum of transmitted multicast packets.
U32 wlanrecvpacket	1.3.6.1.4.1.4526.4.2.5.2.7	Unsigned32	read-only	the field indicates the sum of received packets.
U32 wlantranspacket	1.3.6.1.4.1.4526.4.2.5.2.8	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 wlanrecvbytes	1.3.6.1.4.1.4526.4.2.5.2.9	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 wlantransbytes	1.3.6.1.4.1.4526.4.2.5.2.10	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
U32 stationnumber	1.3.6.1.4.1.4526.4.2.5.2.11	Unsigned32	read-only	This attribute shall indicate the stations count.
stationListTable	1.3.6.1.4.1.4526.4.2.6		not-accessible	stationList Table show multiple instances on an agent.
stationListEntry	1.3.6.1.4.1.4526.4.2.6.1		not-accessible	stationlist Entry show the connected station status
MAC macaddress	1.3.6.1.4.1.4526.4.2.6.1.1	MacAddress	read-only	This attribute shall indicate MAC address of the associated stationID.
IP ipAddr	1.3.6.1.4.1.4526.4.2.6.1.2	IpAddress	read-only	This attribute shall indicate Ip address of the associated stationID.
INT stationstatus	1.3.6.1.4.1.4526.4.2.6.1.3	INTEGER	read-only	This attribute shall indicate the status of station.
operationapmode	1.3.6.1.4.1.4526.4.2.7
INT apmode	1.3.6.1.4.1.4526.4.2.7.1	INTEGER	read-write	This a command field for conntrol AP operation mode.
MAC ptpremotemacaddress	1.3.6.1.4.1.4526.4.2.7.2	MacAddress	read-write	This attribute shall indicate the stationID.
MAC pxpremotemacaddress1	1.3.6.1.4.1.4526.4.2.7.3	MacAddress	read-write	This attribute shall indicate the stationID.
MAC pxpremotemacaddress2	1.3.6.1.4.1.4526.4.2.7.4	MacAddress	read-write	This attribute shall indicate the stationID.
MAC pxpremotemacaddress3	1.3.6.1.4.1.4526.4.2.7.5	MacAddress	read-write	This attribute shall indicate the stationID.
MAC pxpremotemacaddress4	1.3.6.1.4.1.4526.4.2.7.6	MacAddress	read-write	This attribute shall indicate the stationID.
MAC repremotemacaddress1	1.3.6.1.4.1.4526.4.2.7.7	MacAddress	read-write	This attribute shall indicate the stationID.
MAC repremotemacaddress2	1.3.6.1.4.1.4526.4.2.7.8	MacAddress	read-write	This attribute shall indicate the stationID.
MAC repremotemacaddress3	1.3.6.1.4.1.4526.4.2.7.9	MacAddress	read-write	This attribute shall indicate the stationID.
MAC repremotemacaddress4	1.3.6.1.4.1.4526.4.2.7.10	MacAddress	read-write	This attribute shall indicate the stationID.
info802dot1x	1.3.6.1.4.1.4526.4.2.8
authinfo	1.3.6.1.4.1.4526.4.2.8.1
IP priradipaddr	1.3.6.1.4.1.4526.4.2.8.1.1	IpAddress	read-write	Internet address of the Primary Radius Server.
INT priradport	1.3.6.1.4.1.4526.4.2.8.1.2	INTEGER	read-write	Port number used for authentication at the Primary Radius Server.
STR priradsharedsecret	1.3.6.1.4.1.4526.4.2.8.1.3	DisplayString	read-write	Secret shared between NAS and the Primary Radius Server.
IP sndradipaddr	1.3.6.1.4.1.4526.4.2.8.1.4	IpAddress	read-write	Internet address of the Second Radius Server.
INT sndradport	1.3.6.1.4.1.4526.4.2.8.1.5	INTEGER	read-write	Port number used for authentication at the Second Radius Server.
STR sndradsharedsecret	1.3.6.1.4.1.4526.4.2.8.1.6	DisplayString	read-write	Secret shared between NAS and the Second Radius Server.
INT reauthtime	1.3.6.1.4.1.4526.4.2.8.1.7	INTEGER	read-write	Current Login Status.
accntinfo	1.3.6.1.4.1.4526.4.2.8.2
IP priacntipaddr	1.3.6.1.4.1.4526.4.2.8.2.1	IpAddress	read-write	IP address of the Primary radius account server.
INT priacntport	1.3.6.1.4.1.4526.4.2.8.2.2	INTEGER	read-write	port number of the Primary radius account server.
STR priacntsharedsecret	1.3.6.1.4.1.4526.4.2.8.2.3	DisplayString	read-write	password used by the ap to connect to the Primary radius account serve.
IP sndacntipaddr	1.3.6.1.4.1.4526.4.2.8.2.4	IpAddress	read-write	IP address of the Second radius account server.
INT sndacntport	1.3.6.1.4.1.4526.4.2.8.2.5	INTEGER	read-write	port number of the Second radius account server.
STR sndacntsharedsecret	1.3.6.1.4.1.4526.4.2.8.2.6	DisplayString	read-write	password used by the ap to connect to the Second radius account server.
userCommand	1.3.6.1.4.1.4526.4.2.9
INT resetAP	1.3.6.1.4.1.4526.4.2.9.1	INTEGER	read-write	This a command field for conntrol AP action. Write any value to reset the AP.
T/F setWirelessstatus	1.3.6.1.4.1.4526.4.2.9.2	TruthValue	read-write	This a command field for conntrol AP's wireless card action. 0: enable wireless card 1: disable wireless card
timeSettings	1.3.6.1.4.1.4526.4.2.10
STR currenttime	1.3.6.1.4.1.4526.4.2.10.1	DisplayString	read-only	This attributes shall indicates the current system time in a format: YYYY/MM/DD hh:mm:ss.
INT timezone	1.3.6.1.4.1.4526.4.2.10.2	INTEGER	read-write	This attribute shall indicate the timezone of the system.
T/F daylightsaving	1.3.6.1.4.1.4526.4.2.10.3	TruthValue	read-write	This attribute shall indicate the Daylight Saving time.
dhcpsSettings	1.3.6.1.4.1.4526.4.2.11
T/F dhcpserver	1.3.6.1.4.1.4526.4.2.11.1	TruthValue	read-write	This attribute shall indicate whether DHCP server is enable or disable.
IP dhcpsipstart	1.3.6.1.4.1.4526.4.2.11.2	IpAddress	read-write	This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpsipend	1.3.6.1.4.1.4526.4.2.11.3	IpAddress	read-write	This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpnetmask	1.3.6.1.4.1.4526.4.2.11.4	IpAddress	read-write	This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format.
IP dhcpsgateway	1.3.6.1.4.1.4526.4.2.11.5	IpAddress	read-write	This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpspridns	1.3.6.1.4.1.4526.4.2.11.6	IpAddress	read-write	This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpspsnddns	1.3.6.1.4.1.4526.4.2.11.7	IpAddress	read-write	This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpspriwins	1.3.6.1.4.1.4526.4.2.11.8	IpAddress	read-write	This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpspsndwins	1.3.6.1.4.1.4526.4.2.11.9	IpAddress	read-write	This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
INT dhcpsleasetime	1.3.6.1.4.1.4526.4.2.11.10	INTEGER	read-write	This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes
T/F anyip	1.3.6.1.4.1.4526.4.2.11.11	TruthValue	read-write	This attribute shall indicate whether AnyIP function is enable or disable.
logSettings	1.3.6.1.4.1.4526.4.2.12
T/F syslog	1.3.6.1.4.1.4526.4.2.12.1	TruthValue	read-write	This attribute shall indicate whether syslog is enable or disable.
IP syslogsrvip	1.3.6.1.4.1.4526.4.2.12.2	IpAddress	read-write	This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IP address in dot format.
INT syslogsrvport	1.3.6.1.4.1.4526.4.2.12.3	INTEGER	read-write	This attributes shall indicates the Port of the Syslog server. *** The value can only be set to a port in dot format.

RFC description

802.11g ProSafe wireless access point management including LAN settings, DHCP, and radio configuration.

Start monitoring NETGEAR ProSafe WG302 wireless access point (network-config/spanning-tree/client-traffic status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WG302-MIB

What Is WG302-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description