All MIBs › WG302
Organization: NETGEAR Inc.
Last Updated: 2005-12-13
Category: NETGEAR Wireless
Description: Defines NETGEAR WG302 dual-band 802.11a/b/g wireless access point management objects for status and client monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is WG302?
WG302 is a Netgear enterprise-specific MIB (registered under the netgear.wireless.wg302 OID branch) for the ProSafe WG302, a dual-band 802.11a/b/g wireless access point. It exposes management data covering device identification, IP/network configuration, and wireless radio and client information for the AP. It supports monitoring of the device's hardware and software status by exposing configuration and operational state that confirms the AP is online, reachable, and correctly configured, alongside its wireless client/radio activity. As an early vendor-specific module it defines its own object tree under the Netgear enterprise OID rather than leaning heavily on IETF standard MIBs. It is typically deployed in small-to-medium business wireless networks where IT staff manage one or more WG302 access points via SNMP alongside Netgear's ProSafe management tools. Engineers can download the WG302 file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WG302. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- NETGEAR ProSafe WG302 wireless access point
Monitoring Examples
No concrete object names were supplied for this MIB, but it is the counterpart of the more fully documented WG302-MIB for the same access point family. An admin would be expected to poll device identification and IP/network configuration objects analogous to WG302-MIB's apName and ipAddr to confirm the AP responds and its address is correct, and radio/client statistics objects to gauge wireless load. A configuration object reverting to defaults or a client-count object dropping to zero would indicate the AP lost its settings or radio connectivity.
What Can Be Monitored
- device identification/name
- IP/network configuration
- wireless radio/channel settings
- associated client count/statistics
This MIB depends on
Related MIBs
Imported Objects
From RFC1213-MIB
| ifIndex |
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| netgear | 1.3.6.1.4.1.4526 | |||
| wireless | 1.3.6.1.4.1.4526.4 | |||
| wg302 | 1.3.6.1.4.1.4526.4.6 | The MIB module for 802.11g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wg302(6) | ||
| lanSettings | 1.3.6.1.4.1.4526.4.6.1 | |||
| STR apName | 1.3.6.1.4.1.4526.4.6.1.1 | DisplayString | read-write | The field indicates the name of AP. |
| MAC sysMacAddress | 1.3.6.1.4.1.4526.4.6.1.2 | MacAddress | read-only | This field indicates the system MAC Address. |
| STR sysVersion | 1.3.6.1.4.1.4526.4.6.1.3 | DisplayString | read-only | This field indicates the system firmware version. |
| INT sysCountryRegion | 1.3.6.1.4.1.4526.4.6.1.4 | INTEGER | read-write | This attribute shall indicate the region of operation for which which the wireless interface is intended. =752: sweden =826: unitedKingdom =840: usa |
| STR adminName | 1.3.6.1.4.1.4526.4.6.1.5 | DisplayString | not-accessible | The field indicates the administrator name. |
| STR adminPasswd | 1.3.6.1.4.1.4526.4.6.1.6 | DisplayString | not-accessible | The field indicates the administrator password. The AP can be managed in such way as utility,telnet and so on. |
| INT dhcpStatus | 1.3.6.1.4.1.4526.4.6.1.7 | INTEGER | read-write | This attribute shall indicate whether dhcp client status. |
| IP ipAddr | 1.3.6.1.4.1.4526.4.6.1.8 | IpAddress | read-write | The field indicates the IP address of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same IP address, when worked in bridge mode. |
| IP netmaskAddr | 1.3.6.1.4.1.4526.4.6.1.9 | IpAddress | read-write | The field indicates the netmask of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same netmask address,when worked in bridge mode. |
| IP gatewayAddr | 1.3.6.1.4.1.4526.4.6.1.10 | IpAddress | read-write | The field indicates the gateway of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same gateway address,when worked in bridge mode. |
| IP pridnsipAddr | 1.3.6.1.4.1.4526.4.6.1.11 | IpAddress | read-write | This attributes shall indicates the IP address of the primary DNS server. ***The value can only be set to an IP address in dot format. |
| IP snddnsipAddr | 1.3.6.1.4.1.4526.4.6.1.12 | IpAddress | read-write | This attributes shall indicates the IP address of the secondary DNS server. ***The value can only be set to an IP address in dot format. |
| T/F spantree | 1.3.6.1.4.1.4526.4.6.1.13 | TruthValue | read-write | This attribute shall indicate spanning tree. |
| T/F vlanEnable | 1.3.6.1.4.1.4526.4.6.1.14 | TruthValue | read-only | This attribute shall indicate whether enable VLAN(802.1Q). |
| INT managementVlanID | 1.3.6.1.4.1.4526.4.6.1.15 | INTEGER | read-only | This attribute shall indicate the Management VLAN ID. |
| INT untaggedVlanID | 1.3.6.1.4.1.4526.4.6.1.16 | INTEGER | read-only | This attribute shall indicate the Untagged VLAN ID. |
| wlanSettingTable | 1.3.6.1.4.1.4526.4.6.2 | not-accessible | wlanSettingsallow for multiple instances on an agent. | |
| wlanSettingEntry | 1.3.6.1.4.1.4526.4.6.2.1 | not-accessible | An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. | |
| INT operatemode | 1.3.6.1.4.1.4526.4.6.2.1.1 | INTEGER | read-only | This attribute shall indicate the desired wireless operating mode. The option are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used. |
| T/F radioEnable | 1.3.6.1.4.1.4526.4.6.2.1.2 | TruthValue | read-write | This attribute shall indicate whether the radio is enabled. |
| INT channel | 1.3.6.1.4.1.4526.4.6.2.1.3 | INTEGER | read-write | This attribute shall indicate the channel number to be used. |
| INT datarate | 1.3.6.1.4.1.4526.4.6.2.1.4 | INTEGER | read-only | This attribute shall indicate the transmite rate. When the operatemode is: auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, and 54:54Mb/s. dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s and 54:54Mb/s. dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, and 11:11 Mb/s. dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s and 54:54Mb/s. |
| T/F wmmSupport | 1.3.6.1.4.1.4526.4.6.2.1.5 | TruthValue | read-write | This field indicates whether support WMM(Wireless Multimedia). |
| INT beaconinterval | 1.3.6.1.4.1.4526.4.6.2.1.6 | INTEGER | read-write | This attribute shall indicate the Beacon Interval. |
| INT rtsthreshold | 1.3.6.1.4.1.4526.4.6.2.1.7 | INTEGER | read-write | This attribute shall indicate the RTS threshold. |
| INT fraglength | 1.3.6.1.4.1.4526.4.6.2.1.8 | INTEGER | read-write | This attribute shall indicate the fragmentation threshold. |
| INT dtiminterval | 1.3.6.1.4.1.4526.4.6.2.1.9 | INTEGER | read-write | This attribute shall indicate the DTIM period. |
| INT preambletype | 1.3.6.1.4.1.4526.4.6.2.1.10 | INTEGER | read-only | This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode. |
| INT txpower | 1.3.6.1.4.1.4526.4.6.2.1.11 | INTEGER | read-write | This attribute shall indicate the tranmiste power. |
| T/F superG | 1.3.6.1.4.1.4526.4.6.2.1.12 | TruthValue | read-write | This attribute shall indicate whether super mode (super-A for 11a radio, Super-G for 11g radio) is enabled. |
| INT accessControlMode | 1.3.6.1.4.1.4526.4.6.2.1.13 | INTEGER | read-only | The field indicates whether the access control list is enabled and the source of the database of the access control list. |
| INT antenna | 1.3.6.1.4.1.4526.4.6.2.1.14 | INTEGER | read-write | This attribute shall indicate the tranmistted power. |
| vapSetting | 1.3.6.1.4.1.4526.4.6.3 | |||
| vapWepAndGlobalSettingTable | 1.3.6.1.4.1.4526.4.6.3.1 | not-accessible | VAP attributes setting table. | |
| vapWepAndGlobalSettingEntry | 1.3.6.1.4.1.4526.4.6.3.1.1 | not-accessible | VAP attributes setting table. | |
| INT wepKeyType | 1.3.6.1.4.1.4526.4.6.3.1.1.1 | INTEGER | read-write | The field shall indicate the type of WEP key. |
| STR key1 | 1.3.6.1.4.1.4526.4.6.3.1.1.2 | DisplayString | read-write | The field indicates the key value of the first default wep key. |
| STR key2 | 1.3.6.1.4.1.4526.4.6.3.1.1.3 | DisplayString | read-write | The field indicates the key value of the second default wep key. |
| STR key3 | 1.3.6.1.4.1.4526.4.6.3.1.1.4 | DisplayString | read-write | The field indicates the key value of the third default wep key. |
| STR key4 | 1.3.6.1.4.1.4526.4.6.3.1.1.5 | DisplayString | read-write | The field indicates the key value of the fourth default wep key. |
| STR wepPassPhrase | 1.3.6.1.4.1.4526.4.6.3.1.1.6 | DisplayString | read-write | This attribute shall indicate WEP pass phrase, used to generate four WEP keys. |
| vapSettingTable | 1.3.6.1.4.1.4526.4.6.3.2 | not-accessible | VAP attributes setting table. | |
| vapSettingEntry | 1.3.6.1.4.1.4526.4.6.3.2.1 | not-accessible | VAP attributes setting table. | |
| INT vapIndex | 1.3.6.1.4.1.4526.4.6.3.2.1.1 | INTEGER | read-only | Description. |
| T/F vapEnable | 1.3.6.1.4.1.4526.4.6.3.2.1.2 | TruthValue | read-write | This attribute shall indicate whether enable VAP. |
| STR ssid | 1.3.6.1.4.1.4526.4.6.3.2.1.3 | DisplayString | read-write | This attribute shall indicate SSID.Its length can't be large than 33 . |
| T/F hidenetworkname | 1.3.6.1.4.1.4526.4.6.3.2.1.4 | TruthValue | read-write | This attribute shall indicate whether broadcast wireless network Name (SSID). |
| INT vlanID | 1.3.6.1.4.1.4526.4.6.3.2.1.5 | INTEGER | read-write | This attribute shall indicate the VLAN ID. |
| STR securityProfileName | 1.3.6.1.4.1.4526.4.6.3.2.1.6 | DisplayString | read-write | Description. |
| STR presharekey | 1.3.6.1.4.1.4526.4.6.3.2.1.7 | DisplayString | read-write | This attribute shall indicate preshare key. |
| INT authenticationtype | 1.3.6.1.4.1.4526.4.6.3.2.1.8 | INTEGER | read-write | The field indicates how to authenticate the station. |
| INT encryption | 1.3.6.1.4.1.4526.4.6.3.2.1.9 | INTEGER | read-write | The field indicates how to encryption the station. |
| INT keyno | 1.3.6.1.4.1.4526.4.6.3.2.1.10 | INTEGER | read-write | The field indicates the number of default wep key. |
| T/F wlanseparator | 1.3.6.1.4.1.4526.4.6.3.2.1.11 | TruthValue | read-write | This attribute shall indicate whether enable No see. |
| remoteSettings | 1.3.6.1.4.1.4526.4.6.4 | |||
| T/F sshd | 1.3.6.1.4.1.4526.4.6.4.1 | TruthValue | read-write | This attribute shall indicate whether the SSH is enabled. |
| T/F snmpenable | 1.3.6.1.4.1.4526.4.6.4.2 | TruthValue | read-only | This attribute shall indicate whether the SNMP agent is enabled. |
| IP trapServerIP | 1.3.6.1.4.1.4526.4.6.4.3 | IpAddress | read-write | The field indicates the trap server IP address. ***The value can only be set to an IP address in dot format. |
| STR trapServerCommunity | 1.3.6.1.4.1.4526.4.6.4.4 | DisplayString | read-write | The field indicates the trap server community name. ***The value can only be set to 1 to 32 readable string. |
| STR readOnlyCommunity | 1.3.6.1.4.1.4526.4.6.4.5 | DisplayString | read-write | The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string. |
| STR readWriteCommunity | 1.3.6.1.4.1.4526.4.6.4.6 | DisplayString | read-write | The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string. |
| statistic | 1.3.6.1.4.1.4526.4.6.5 | |||
| wiredethernetstat | 1.3.6.1.4.1.4526.4.6.5.1 | |||
| U32 lanrecvpacket | 1.3.6.1.4.1.4526.4.6.5.1.1 | Unsigned32 | read-only | the field indicates the sum of received packets. |
| U32 lantranspacket | 1.3.6.1.4.1.4526.4.6.5.1.2 | Unsigned32 | read-only | the field indicates the sum of transmitted packets. |
| U32 lanrecvbytes | 1.3.6.1.4.1.4526.4.6.5.1.3 | Unsigned32 | read-only | the field indicates the sum of received bytes. |
| U32 lantransbytes | 1.3.6.1.4.1.4526.4.6.5.1.4 | Unsigned32 | read-only | the field indicates the sum of transmitted bytes. |
| wirelessStatTable | 1.3.6.1.4.1.4526.4.6.5.2 | not-accessible | Description. | |
| wirelessStatEntry | 1.3.6.1.4.1.4526.4.6.5.2.1 | not-accessible | Description. | |
| U32 wlanrecvunicastpacket | 1.3.6.1.4.1.4526.4.6.5.2.1.1 | Unsigned32 | read-only | the field indicates the sum of received unicast packets. |
| U32 wlantransunicastpacket | 1.3.6.1.4.1.4526.4.6.5.2.1.2 | Unsigned32 | read-only | the field indicates the sum of transmitted unicast packets. |
| U32 wlanrecvbroadcastpacket | 1.3.6.1.4.1.4526.4.6.5.2.1.3 | Unsigned32 | read-only | the field indicates the sum of received broadcast packets. |
| U32 wlantransbroadcastpacket | 1.3.6.1.4.1.4526.4.6.5.2.1.4 | Unsigned32 | read-only | the field indicates the sum of transmitted broadcast packets. |
| U32 wlanrecvmulticastpacket | 1.3.6.1.4.1.4526.4.6.5.2.1.5 | Unsigned32 | read-only | the field indicates the sum of received multicast packets. |
| U32 wlantransmulticastpacket | 1.3.6.1.4.1.4526.4.6.5.2.1.6 | Unsigned32 | read-only | the field indicates the sum of transmitted multicast packets. |
| U32 wlanrecvpacket | 1.3.6.1.4.1.4526.4.6.5.2.1.7 | Unsigned32 | read-only | the field indicates the sum of received packets. |
| U32 wlantranspacket | 1.3.6.1.4.1.4526.4.6.5.2.1.8 | Unsigned32 | read-only | the field indicates the sum of transmitted packets. |
| U32 wlanrecvbytes | 1.3.6.1.4.1.4526.4.6.5.2.1.9 | Unsigned32 | read-only | the field indicates the sum of received bytes. |
| U32 wlantransbytes | 1.3.6.1.4.1.4526.4.6.5.2.1.10 | Unsigned32 | read-only | the field indicates the sum of transmitted bytes. |
| stationListTable | 1.3.6.1.4.1.4526.4.6.6 | not-accessible | stationList Table show multiple instances on an agent. | |
| stationListEntry | 1.3.6.1.4.1.4526.4.6.6.1 | not-accessible | An entry in the wlanClientsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. | |
| MAC macaddress | 1.3.6.1.4.1.4526.4.6.6.1.1 | MacAddress | read-only | This attribute shall indicate MAC address of the associated stationID. |
| IP clientIpaddr | 1.3.6.1.4.1.4526.4.6.6.1.2 | IpAddress | read-only | This attribute shall indicate Ip address of the associated stationID. |
| INT clientWirelessMode | 1.3.6.1.4.1.4526.4.6.6.1.3 | INTEGER | read-only | This attribute shall indicate the wireless mode of the associated stationID. |
| INT stationstatus | 1.3.6.1.4.1.4526.4.6.6.1.4 | INTEGER | read-only | This attribute shall indicate the status of station. |
| wlanWdsTable | 1.3.6.1.4.1.4526.4.6.7 | not-accessible | WDS attributes in tablular form to allow for multiple instances on an agent. | |
| wlanWdsEntry | 1.3.6.1.4.1.4526.4.6.7.1 | not-accessible | An entry in the wlanWdsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. | |
| INT apmode | 1.3.6.1.4.1.4526.4.6.7.1.1 | INTEGER | read-only | This a command field for conntrol AP operation mode. |
| MAC ptpremotemacaddress | 1.3.6.1.4.1.4526.4.6.7.1.2 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC pxpremotemacaddress1 | 1.3.6.1.4.1.4526.4.6.7.1.3 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC pxpremotemacaddress2 | 1.3.6.1.4.1.4526.4.6.7.1.4 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC pxpremotemacaddress3 | 1.3.6.1.4.1.4526.4.6.7.1.5 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC pxpremotemacaddress4 | 1.3.6.1.4.1.4526.4.6.7.1.6 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC repremotemacaddress1 | 1.3.6.1.4.1.4526.4.6.7.1.7 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC repremotemacaddress2 | 1.3.6.1.4.1.4526.4.6.7.1.8 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC repremotemacaddress3 | 1.3.6.1.4.1.4526.4.6.7.1.9 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC repremotemacaddress4 | 1.3.6.1.4.1.4526.4.6.7.1.10 | MacAddress | read-write | This attribute shall indicate the stationID. |
| MAC localMacAddress | 1.3.6.1.4.1.4526.4.6.7.1.11 | MacAddress | read-only | This attribute shall indicate the local MAC Address. |
| info802dot1x | 1.3.6.1.4.1.4526.4.6.8 | |||
| authinfo | 1.3.6.1.4.1.4526.4.6.8.1 | |||
| IP priradipaddr | 1.3.6.1.4.1.4526.4.6.8.1.1 | IpAddress | read-write | Internet address of the Primary Radius Server. |
| INT priradport | 1.3.6.1.4.1.4526.4.6.8.1.2 | INTEGER | read-write | Port number used for authentication at the Primary Radius Server. |
| STR priradsharedsecret | 1.3.6.1.4.1.4526.4.6.8.1.3 | DisplayString | read-write | Secret shared between NAS and the Primary Radius Server. |
| IP sndradipaddr | 1.3.6.1.4.1.4526.4.6.8.1.4 | IpAddress | read-write | Internet address of the Second Radius Server. |
| INT sndradport | 1.3.6.1.4.1.4526.4.6.8.1.5 | INTEGER | read-write | Port number used for authentication at the Second Radius Server. |
| STR sndradsharedsecret | 1.3.6.1.4.1.4526.4.6.8.1.6 | DisplayString | read-write | Secret shared between NAS and the Second Radius Server. |
| accntinfo | 1.3.6.1.4.1.4526.4.6.8.2 | |||
| IP priacntipaddr | 1.3.6.1.4.1.4526.4.6.8.2.1 | IpAddress | read-write | IP address of the Primary radius account server. |
| INT priacntport | 1.3.6.1.4.1.4526.4.6.8.2.2 | INTEGER | read-write | port number of the Primary radius account server. |
| STR priacntsharedsecret | 1.3.6.1.4.1.4526.4.6.8.2.3 | DisplayString | read-write | password used by the ap to connect to the Primary radius account serve. |
| IP sndacntipaddr | 1.3.6.1.4.1.4526.4.6.8.2.4 | IpAddress | read-write | IP address of the Second radius account server. |
| INT sndacntport | 1.3.6.1.4.1.4526.4.6.8.2.5 | INTEGER | read-write | port number of the Second radius account server. |
| STR sndacntsharedsecret | 1.3.6.1.4.1.4526.4.6.8.2.6 | DisplayString | read-write | password used by the ap to connect to the Second radius account server. |
| userCommand | 1.3.6.1.4.1.4526.4.6.9 | |||
| INT resetAP | 1.3.6.1.4.1.4526.4.6.9.1 | INTEGER | read-write | This a command field for conntrol AP action. Write value 1 to reset the AP. |
| timeSettings | 1.3.6.1.4.1.4526.4.6.10 | |||
| STR currenttime | 1.3.6.1.4.1.4526.4.6.10.1 | DisplayString | read-only | This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss. |
| INT timezone | 1.3.6.1.4.1.4526.4.6.10.2 | INTEGER | read-write | This field indicates the timezone of the system. |
| T/F daylightsaving | 1.3.6.1.4.1.4526.4.6.10.3 | TruthValue | read-write | This attribute shall indicate the Daylight Saving time. |
| dhcpsSettings | 1.3.6.1.4.1.4526.4.6.11 | |||
| T/F dhcpserver | 1.3.6.1.4.1.4526.4.6.11.1 | TruthValue | read-write | This attribute shall indicate whether DHCP server is enable or disable. |
| IP dhcpsipstart | 1.3.6.1.4.1.4526.4.6.11.2 | IpAddress | read-write | This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| IP dhcpsipend | 1.3.6.1.4.1.4526.4.6.11.3 | IpAddress | read-write | This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| IP dhcpnetmask | 1.3.6.1.4.1.4526.4.6.11.4 | IpAddress | read-write | This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format. |
| IP dhcpsgateway | 1.3.6.1.4.1.4526.4.6.11.5 | IpAddress | read-write | This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| IP dhcpspridns | 1.3.6.1.4.1.4526.4.6.11.6 | IpAddress | read-write | This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| IP dhcpspsnddns | 1.3.6.1.4.1.4526.4.6.11.7 | IpAddress | read-write | This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| IP dhcpspriwins | 1.3.6.1.4.1.4526.4.6.11.8 | IpAddress | read-write | This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| IP dhcpspsndwins | 1.3.6.1.4.1.4526.4.6.11.9 | IpAddress | read-write | This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format. |
| INT dhcpsleasetime | 1.3.6.1.4.1.4526.4.6.11.10 | INTEGER | read-write | This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes |
| logSettings | 1.3.6.1.4.1.4526.4.6.12 | |||
| T/F syslog | 1.3.6.1.4.1.4526.4.6.12.1 | TruthValue | read-write | This attribute shall indicate whether syslog is enable or disable. |
| IP syslogsrvip | 1.3.6.1.4.1.4526.4.6.12.2 | IpAddress | read-write | This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IP address in dot format. |
| INT syslogsrvport | 1.3.6.1.4.1.4526.4.6.12.3 | INTEGER | read-write | This attributes shall indicates the Port of the Syslog server. *** The value can only be set to a port in dot format. |
| httpRedirectSettings | 1.3.6.1.4.1.4526.4.6.13 | |||
| T/F httpRedirectEnable | 1.3.6.1.4.1.4526.4.6.13.1 | TruthValue | read-write | Description. |
| STR httpRedirectURL | 1.3.6.1.4.1.4526.4.6.13.2 | DisplayString | read-write | Description. |
| detectedApTable | 1.3.6.1.4.1.4526.4.6.14 | not-accessible | detectedAp Table shows list of detected neighbouring APs. | |
| detectedApEntry | 1.3.6.1.4.1.4526.4.6.14.1 | not-accessible | An entry in the detectedApTable. | |
| MAC apmac | 1.3.6.1.4.1.4526.4.6.14.1.1 | MacAddress | read-only | This attribute shall indicate MAC address of the detected AP. |
| STR apssid | 1.3.6.1.4.1.4526.4.6.14.1.2 | DisplayString | read-only | This attribute shall indicate ssid of the detected AP. |
| T/F apprivacy | 1.3.6.1.4.1.4526.4.6.14.1.3 | TruthValue | read-only | This attribute shall indicate whether privacy is enabled. |
| STR apband | 1.3.6.1.4.1.4526.4.6.14.1.4 | DisplayString | read-only | This attribute shall indicate the operating band of detected AP. |
| INT apchannel | 1.3.6.1.4.1.4526.4.6.14.1.5 | INTEGER | read-only | This attribute shall indicate the channel number used. |
| INT aprate | 1.3.6.1.4.1.4526.4.6.14.1.6 | INTEGER | read-only | This attribute shall indicate the rate. |
| INT apbeaconInterval | 1.3.6.1.4.1.4526.4.6.14.1.7 | INTEGER | read-only | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| INT apnumBeacons | 1.3.6.1.4.1.4526.4.6.14.1.8 | INTEGER | read-only | This attribute shall indicate the number of beacons received. |
| INT aplastBeacon | 1.3.6.1.4.1.4526.4.6.14.1.9 | INTEGER | read-only | This attribute shall indicate the time of the last beacon. |
| knownApTable | 1.3.6.1.4.1.4526.4.6.15 | not-accessible | knownAp Table shows list of known APs. | |
| knownApEntry | 1.3.6.1.4.1.4526.4.6.15.1 | not-accessible | An entry in the knownApTable. | |
| MAC knownapmac | 1.3.6.1.4.1.4526.4.6.15.1.1 | MacAddress | read-only | This attribute shall indicate MAC address of the known AP. |
| STR knownapssid | 1.3.6.1.4.1.4526.4.6.15.1.2 | DisplayString | read-only | This attribute shall indicate ssid of the known AP. |
| T/F knownapprivacy | 1.3.6.1.4.1.4526.4.6.15.1.3 | TruthValue | read-only | This attribute shall indicate whether privacy is enabled. |
| STR knownapband | 1.3.6.1.4.1.4526.4.6.15.1.4 | DisplayString | read-only | This attribute shall indicate the operating band of known AP. |
| INT knownapchannel | 1.3.6.1.4.1.4526.4.6.15.1.5 | INTEGER | read-only | This attribute shall indicate the channel number used. |
| INT knownaprate | 1.3.6.1.4.1.4526.4.6.15.1.6 | INTEGER | read-only | This attribute shall indicate the rate. |
| INT knownapbeaconInterval | 1.3.6.1.4.1.4526.4.6.15.1.7 | INTEGER | read-only | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| INT knownapnumBeacons | 1.3.6.1.4.1.4526.4.6.15.1.8 | INTEGER | read-only | This attribute shall indicate the number of beacons received. |
| INT knownaplastBeacon | 1.3.6.1.4.1.4526.4.6.15.1.9 | INTEGER | read-only | This attribute shall indicate the time of the last beacon. |
| INT knownapEntryStatus | 1.3.6.1.4.1.4526.4.6.15.1.10 | INTEGER | read-create | The Known AP Entry status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| unknownApTable | 1.3.6.1.4.1.4526.4.6.16 | not-accessible | unknownAp Table shows list of unknown APs. | |
| unknownApEntry | 1.3.6.1.4.1.4526.4.6.16.1 | not-accessible | An entry in the unknownApTable. | |
| MAC unknownapmac | 1.3.6.1.4.1.4526.4.6.16.1.1 | MacAddress | read-only | This attribute shall indicate MAC address of the unknown AP. |
| STR unknownapssid | 1.3.6.1.4.1.4526.4.6.16.1.2 | DisplayString | read-only | This attribute shall indicate ssid of the unknown AP. |
| T/F unknownapprivacy | 1.3.6.1.4.1.4526.4.6.16.1.3 | TruthValue | read-only | This attribute shall indicate whether privacy is enabled. |
| STR unknownapband | 1.3.6.1.4.1.4526.4.6.16.1.4 | DisplayString | read-only | This attribute shall indicate the operating band of unknown AP. |
| INT unknownapchannel | 1.3.6.1.4.1.4526.4.6.16.1.5 | INTEGER | read-only | This attribute shall indicate the channel number used. |
| INT unknownaprate | 1.3.6.1.4.1.4526.4.6.16.1.6 | INTEGER | read-only | This attribute shall indicate the rate. |
| INT unknownapbeaconInterval | 1.3.6.1.4.1.4526.4.6.16.1.7 | INTEGER | read-only | This attribute shall indicate the beacon interval in kus (1.024 ms). |
| INT unknownapnumBeacons | 1.3.6.1.4.1.4526.4.6.16.1.8 | INTEGER | read-only | This attribute shall indicate the number of beacons received. |
| INT unknownaplastBeacon | 1.3.6.1.4.1.4526.4.6.16.1.9 | INTEGER | read-only | This attribute shall indicate the time of the last beacon. |
| wlanAccessControlLocalTable | 1.3.6.1.4.1.4526.4.6.17 | not-accessible | ACL attributes in tablular form to allow for multiple instances on an agent. | |
| wlanAccessControlLocalEntry | 1.3.6.1.4.1.4526.4.6.17.1 | not-accessible | An entry in the wlanAccessControlListTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. | |
| MAC aclMAC | 1.3.6.1.4.1.4526.4.6.17.1.1 | MacAddress | read-only | This field should indicate an MAC address entry in the access control local database. When write this field aclMAC=000000000000, shall remove current MAC address from local database. Otherwise, shall update the MAC address. |
| INT aclMacStatus | 1.3.6.1.4.1.4526.4.6.17.1.2 | INTEGER | read-create | The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
RFC description
Manages configuration and monitoring of NETGEAR WG302 802.11g ProSafe wireless access points.
Start monitoring NETGEAR ProSafe WG302 wireless access point (radio/client-activity and reachability status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.