All MIBs › WG102-MIB › apOutputPowerLevel
apOutputPowerLevel
Module: WG102-MIB
OID (symbolic): WG102-MIB::apOutputPowerLevel
OID (numeric): 1.3.6.1.4.1.4526.4.3.1000.3.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is apOutputPowerLevel?
Sets this access point's radio transmit power level as a fraction of maximum - full, half, quarter, eighth, or minimum - letting an admin reduce coverage range or interference; defaults to full.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.3.1000.3.1.14 snmpwalk -v2c -c public <target> WG102-MIB::apOutputPowerLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.3.1000.3.1.14.1 snmpget -v2c -c public <target> WG102-MIB::apOutputPowerLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.4.3.1000.3.1.14.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> apOutputPowerLevel.1
Start monitoring NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WG102-MIB::apOutputPowerLevel OID value, configure state conditions and alerts, and monitor any NETGEAR WG102 802.11g ProSafe wireless access points (firmware-version/IP-DHCP config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.4 | wirelessProducts | NETGEAR-ME-MIB |
| 1.3.6.1.4.1.4526.4.3 | wg102 | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.4.3.1000 | version | WG102-MIB |
| 1.3.6.1.4.1.4526.4.3.1000.3 | wirelessAP24GGroup | WG102-MIB |
| 1.3.6.1.4.1.4526.4.3.1000.3.1 | apWirelessSettingGroup | WG102-MIB |
| 1.3.6.1.4.1.4526.4.3.1000.3.1.14 | apOutputPowerLevel | WG102-MIB |