VISM-NONAXIPOP-TRAPS-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › VISM-NONAXIPOP-TRAPS-MIB

Category: VoIP and Telephony

Description: Defines non-AXI population SNMP traps for fault notification on Cisco VISM voice modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VISM-NONAXIPOP-TRAPS-MIB?

VISM-NONAXIPOP-TRAPS-MIB is a Cisco vendor MIB defining SNMP trap notifications for fault conditions on VISM (Voice Interworking Service Module) voice cards operating outside the AXI population framework. It is a notification-only module used to alert network management systems of fault or state-change events on VISM hardware/software rather than exposing polled data tables itself. Its monitoring value is entirely fault/event-driven — traps generated here would flag conditions such as module failures or abnormal states needing operator attention, supplementing the polled status data found in companion VISM MIBs (session, LAPD). No specific dependency objects are shown, but it complements the broader VISM MIB suite on Cisco MGX/AXIS platforms. It is typically deployed on Cisco VISM service modules in Cisco MGX/AXIS voice gateway chassis. Engineers can download the VISM-NONAXIPOP-TRAPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VISM-NONAXIPOP-TRAPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Cisco VISM voice interworking service modules (MGX/AXIS platforms)

Monitoring Examples

No sample objects were provided for this MIB, and its description indicates it is purely a trap-definition module; it is used to notify an NMS of fault events on VISM modules, but no polled runtime data objects are available to describe a concrete monitoring scenario.

Imported Objects

From BASIS-GENERIC-MIB

functionModuleTypeOBJECT-TYPE
moduleSlotNumberOBJECT-TYPE
moduleTrapAlarmSeverityOBJECT-TYPE

From BASIS-MIB

basisOBJECT-IDENTITY

From BASIS-SHELF-MIB

shelfNodeNameOBJECT-TYPE
shelfNumOBJECT-TYPE

From CISCO-WAN-ANNOUNCEMENT-MIB

cwAnnFileCodecOBJECT-TYPE
cwAnnFileNameOBJECT-TYPE
cwAnnFileStatusOBJECT-TYPE

From CISCO-WAN-AXIPOP-MIB

vismTrapIntIndex1OBJECT-TYPE
vismTrapIntIndex2OBJECT-TYPE

From CISCO-WAN-LAPD-TRUNK-MIB

vismLapdTrunkStateOBJECT-TYPE

From CISCO-WAN-MG-MIB

mgAdministrativeStateOBJECT-TYPE
mgDnsResolutionTypeOBJECT-TYPE
mgDomainNameOBJECT-TYPE
mgEndpointChannelMapOBJECT-TYPE
mgEndpointLineNumberOBJECT-TYPE
mgEndpointStateOBJECT-TYPE
mgcAssociationStateOBJECT-TYPE
mgcNameOBJECT-TYPE
mgcResolutionCommStateOBJECT-TYPE
mgcResolutionIpAddressOBJECT-TYPE
mgcResolutionNameOBJECT-TYPE

From CISCO-WAN-MGC-REDUN-MIB

mgcRedundancyGrpActStateOBJECT-TYPE

From CISCO-WAN-PERSISTENT-XGCP-EVENTS-MIB

persistentXgcpEventNameOBJECT-TYPE

From CISCO-WAN-RTP-CONN-MIB

vismRtpConnAlarmStateOBJECT-TYPE
vismRtpFailReasonOBJECT-TYPE
vismRtpLcnOBJECT-TYPE

From CISCO-WAN-SRCP-MIB

srcpPeerGrpTimeSinceHeartbeatOBJECT-TYPE
srcpPeerTimeSinceHeartbeatOBJECT-TYPE

From CISCO-WAN-VISM-TONE-PLAN-MIB

tonePlanFileNameOBJECT-TYPE
tonePlanRegionNameOBJECT-TYPE
tonePlanVersionNumberOBJECT-TYPE

From GENERICOBJECT-MIB

genericTimeStampOBJECT-TYPE

From INT-SERV-MIB

intSrvFlowStatusOBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RSVP-MIB

rsvpResvFwdStatusOBJECT-TYPE
rsvpResvStatusOBJECT-TYPE
rsvpSenderStatusOBJECT-TYPE
rsvpSessionDestAddrOBJECT-TYPE

From RTM-MIB

lastSequenceNumberOBJECT-TYPE

From VISM-LAPD-MIB

vismLapdDlcIndexOBJECT-TYPE
vismLapdDlcLinkStateOBJECT-TYPE
vismLapdDlcSapiOBJECT-TYPE
vismLapdDlcTeiOBJECT-TYPE
vismLapdIndexOBJECT-TYPE

From VISM-SESSION-MIB

vismRudpSessionNumOBJECT-TYPE
vismRudpSessionStateOBJECT-TYPE
vismSessionGrpNumOBJECT-TYPE
vismSessionGrpStateOBJECT-TYPE
vismSessionSetNumOBJECT-TYPE
vismSessionSetStateOBJECT-TYPE
OIDs

RFC description

Defines SNMP trap extensions for VISM voice card, covering VoIP, LAPD, and redundancy group event notifications.

Start monitoring Cisco VISM voice interworking service modules (MGX/AXIS platforms) (module fault/state-change notification status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VISM-NONAXIPOP-TRAPS-MIB