All MIBs › USR-TRAP-MIB
Category: CommWorks/3Com Access Equipment
Description:
Defines SNMP trap notifications for fault and event reporting on CommWorks broadband equipment.
Imported Objects
What Is USR-TRAP-MIB?
USR-TRAP-MIB is a vendor-specific SNMP module originally from U.S. Robotics/CommWorks defining trap notifications for fault and event reporting on CommWorks broadband access equipment (e.g. modem/remote-access concentrators). Its only confirmed content in the available source is the "usr" enterprise OID branch under which the vendor's trap and object definitions are rooted; the specific fault/event traps themselves are defined using this branch as their base. As a trap-oriented module it is used for fault monitoring - alerting on abnormal conditions or events on the equipment - rather than exposing polled hardware performance counters like temperature or CPU load directly, though the underlying traps would typically flag conditions such as line faults, port failures, or configuration issues. No other MIB dependency is evident beyond the standard SNMP notification framework and the vendor's own OID registration. Typical deployment context is legacy USR/CommWorks broadband remote-access or modem-bank equipment in telecom/ISP environments. Engineers can download the USR-TRAP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in USR-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- fault/event trap notifications (specific trap types not detailed in available source)
Supported Devices
- U.S. Robotics/CommWorks broadband access equipment (modem/remote-access concentrator)
Monitoring Examples
With only the "usr" root OID confirmed in the available sample objects, this module's specific trap objects (fault codes, event descriptions) are not directly enumerated in the source material; a network management station would subscribe to traps rooted under the "usr" enterprise branch to receive fault notifications from CommWorks equipment. Without further object detail, a more specific polling scenario cannot be responsibly constructed. This entry should be treated as based on limited available data pending fuller module content.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| usr | 1.3.6.1.4.1.429 | |||
| NTF moduleInserted | 1.3.6.1.4.1.429.0.1 | A card has been inserted into the hub. | ||
| NTF moduleRemoved | 1.3.6.1.4.1.429.0.2 | A card has been removed from the hub. | ||
| NTF psuWarning | 1.3.6.1.4.1.429.0.3 | Power supply voltage out of normal operating range. | ||
| NTF psuFailure | 1.3.6.1.4.1.429.0.4 | Power supply failure. | ||
| NTF tempWarning | 1.3.6.1.4.1.429.0.5 | Internal hub temperature out of normal operating range. | ||
| NTF fanFailure | 1.3.6.1.4.1.429.0.6 | Hub cooling fan failed. | ||
| NTF entityWatchdogTimeout | 1.3.6.1.4.1.429.0.7 | Watchdog timeout detected; indication of software failure. | ||
| NTF entityMgtBusFailure | 1.3.6.1.4.1.429.0.8 | Management bus failure. Entity fails to respond to Managment Card. | ||
| NTF incomingConnectionEstablished | 1.3.6.1.4.1.429.0.9 | Incoming connection established on modem. | ||
| NTF outgoingConnectionEstablished | 1.3.6.1.4.1.429.0.10 | Outgoing connection established on modem. | ||
| NTF incomingConnectionTerminated | 1.3.6.1.4.1.429.0.11 | Incoming connection terminated on modem. | ||
| NTF outgoingConnectionTerminated | 1.3.6.1.4.1.429.0.12 | Outgoing connection terminated on modem. | ||
| NTF connectAttemptFailure | 1.3.6.1.4.1.429.0.13 | Modem failed an attempt to connect with another modem. | ||
| NTF connectTimerExpired | 1.3.6.1.4.1.429.0.14 | Modem's connection time limit expired. The connection was terminated. | ||
| NTF dteTransmitDataIdle | 1.3.6.1.4.1.429.0.15 | The DTE connected to this modem has not transmitted anything to this modem for a period longer than its idle time threshold. | ||
| NTF dtrTrue | 1.3.6.1.4.1.429.0.16 | The attached DTE is asserting the DTR signal in a 'true' condition. | ||
| NTF dtrFalse | 1.3.6.1.4.1.429.0.17 | The DTE attached to this modem is asserting DTR in a 'false' condition. | ||
| NTF blerCountAtThreshold | 1.3.6.1.4.1.429.0.18 | This modem's block error counter has exceeded the defined 'good' threshold during the current call. | ||
| NTF fallbackCountAtThreshold | 1.3.6.1.4.1.429.0.19 | This modem's fallback counter has exceeded the normal 'good' threshold during the current call. | ||
| NTF noDialtone | 1.3.6.1.4.1.429.0.20 | The modem has detected a lack of dial tone when it went off hook to dial. | ||
| NTF noLoopCurrent | 1.3.6.1.4.1.429.0.21 | The modem has detected a lack of loop current on the phone line when it went off hook to dial. | ||
| NTF yellowAlarm | 1.3.6.1.4.1.429.0.22 | A yellow alarm condition exists when the remote end of a DS1 is experiencing an 'out-of-frame' or 'OOF' condition. | ||
| NTF redAlarm | 1.3.6.1.4.1.429.0.23 | The framing pattern has been lost on the DS1's receiver. This is also known as an 'out-of-frame' or 'OOF' condition. | ||
| NTF lossOfSignal | 1.3.6.1.4.1.429.0.24 | The DS1 receiver has received 175 consecutive 0's. The DS1 is unable to recover a receive signal. | ||
| NTF alarmIndicationSignal | 1.3.6.1.4.1.429.0.25 | The DS1 is receiving an all ones pattern. This is an indication that the remote end has lost its receive signal. This condition is also known as blue alarm. | ||
| NTF transmitTimingSourceSwitch | 1.3.6.1.4.1.429.0.26 | The specified Dual T1 card has switched to an alternate timing source. | ||
| NTF modemResetByDte | 1.3.6.1.4.1.429.0.27 | This specific trap is generated when modem is reset by dte. | ||
| NTF modemRingNoAnswer | 1.3.6.1.4.1.429.0.28 | If the DTR is present and s0 register on the NAC is not equal to zero, then the Modem Ring No Answer event is generated. | ||
| NTF dteRingNoAnswer | 1.3.6.1.4.1.429.0.29 | The DTE Ring No Answer event is generated when the DTR is not present and the s0 register on the NAC is not equal to zero. | ||
| NTF pktBusSessActive | 1.3.6.1.4.1.429.0.30 | Packet bus session active trap. | ||
| NTF pktBusSessCongestion | 1.3.6.1.4.1.429.0.31 | Packet bus session congestion trap. | ||
| NTF pktBusSessLost | 1.3.6.1.4.1.429.0.32 | Packet bus session lost trap. | ||
| NTF pktBusSessInactive | 1.3.6.1.4.1.429.0.33 | Packet bus session inactive trap. | ||
| NTF nacUserInterfaceReset | 1.3.6.1.4.1.429.0.34 | The NAC has been RESET from the User Interface. | ||
| NTF gwWanPortOutOfService | 1.3.6.1.4.1.429.0.35 | A gateway WAN port has changed from Link Active to Out of Service. | ||
| NTF gwWanPortLinkActive | 1.3.6.1.4.1.429.0.36 | A gateway WAN port has changed from Out of Service to Link Active. | ||
| NTF dialOutLoginFail | 1.3.6.1.4.1.429.0.37 | A dial out login security session has failed. | ||
| NTF dialInLoginFail | 1.3.6.1.4.1.429.0.38 | A dial in login security session has failed. | ||
| NTF dialOutRestrictedNum | 1.3.6.1.4.1.429.0.39 | A dial out security session has failed as a result of attempting to dial a restricted phone number. | ||
| NTF dialBackRestrictedNum | 1.3.6.1.4.1.429.0.40 | A dial back security session has failed as a result of attempting to dial a restricted phone number. | ||
| NTF userBlacklisted | 1.3.6.1.4.1.429.0.41 | A security user has reached their final failed login attempt number and is now being blacklisted. | ||
| NTF loginAttemptByBlacklistedUser | 1.3.6.1.4.1.429.0.42 | A security login attempt by a currently blacklisted user has occurred. | ||
| NTF responseAttemptLimExceeded | 1.3.6.1.4.1.429.0.43 | A security user has failed to issue a valid response to a particular security prompt before the configured limit. | ||
| NTF mdmLoginAttemptLimExceeded | 1.3.6.1.4.1.429.0.44 | This signals a security session failure when the indicated user does not appear in the security user database. | ||
| NTF dialOutCallDuration | 1.3.6.1.4.1.429.0.45 | A dial out call has ended. | ||
| NTF dialInCallDuration | 1.3.6.1.4.1.429.0.46 | A dial in call has ended. | ||
| NTF pktBusSessError | 1.3.6.1.4.1.429.0.47 | Packet bus session error trap. | ||
| NTF nmcArCustomTrap | 1.3.6.1.4.1.429.0.48 | NMC AutoResponse SNMP TRAP | ||
| NTF acctSrvrLoss | 1.3.6.1.4.1.429.0.49 | Contact lost with RADIUS accounting server. | ||
| NTF yellowAlarmClear | 1.3.6.1.4.1.429.0.50 | A yellow alarm condition has been cleared. | ||
| NTF redAlarmClear | 1.3.6.1.4.1.429.0.51 | The red alarm condition has been cleared. | ||
| NTF lossOfSignalClear | 1.3.6.1.4.1.429.0.52 | The loss of signal condition has been cleared. | ||
| NTF alarmIndicationSignalClear | 1.3.6.1.4.1.429.0.53 | The blue alarm condition has been cleared. | ||
| NTF ctIncomingConnectionEstablished | 1.3.6.1.4.1.429.0.54 | Incoming connection established on modem. | ||
| NTF ctOutgoingConnectionEstablished | 1.3.6.1.4.1.429.0.55 | Outgoing connection established on modem. | ||
| NTF ctIncomingConnectionTerminated | 1.3.6.1.4.1.429.0.56 | Incoming connection terminated on modem. | ||
| NTF ctOutgoingConnectionTerminated | 1.3.6.1.4.1.429.0.57 | Outgoing connection terminated on modem. | ||
| NTF ctConnectAttemptFailure | 1.3.6.1.4.1.429.0.58 | Modem failed an attempt to connect with another modem. | ||
| NTF contCrcAlarm | 1.3.6.1.4.1.429.0.59 | A continuous CRC error condition has occurred on the DS1. | ||
| NTF contCrcAlarmClear | 1.3.6.1.4.1.429.0.60 | A continuous CRC error condition has cleared on the DS1. | ||
| NTF phyStateChng | 1.3.6.1.4.1.429.0.61 | A physical state change has occurred on the DS1. |
RFC description
Defines SNMP trap types and event notifications for USR network management devices.
Start monitoring U.S. Robotics/CommWorks broadband access equipment, modem/remote-access concentrator (fault/event trap notification status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.