NMC-MIB

All MIBs › NMC-MIB

Category: Hardware Inventory, Network Management

Description: Manages network management controller configuration, status, and event reporting objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NMC-MIB?

NMC-MIB is a private enterprise MIB (its "usr"/"nas" object identifiers are characteristic of US Robotics/Livingston-style dial-up Network Access Server equipment) for a Network Management Card (NMC) providing system clock, dial-out, and event-notification configuration for a chassis-based remote-access or modem-pool system. It exposes objects for system time/date/timezone/GMT offset, daylight-saving handling, WAN dial-out phone number and modem AT command string, auto-configuration-on-power-up behavior, WAN dial retry count/pause/suspend timers, and an authentication-failure trap enable flag. For hardware/software status monitoring, it is mainly useful for confirming the NMC's clock is correctly synchronized (nmcCfgSystemTime/nmcCfgSystemDate/nmcTimezone) after a power event, and for verifying dial-out/retry behavior (nmcCfgNumWanRetries, nmcCfgWanRetryPause) is tuned so the NAS doesn't hammer a failed WAN dial-out connection. Its use of nmcCfgAuthFailTrapEnable implies it works alongside the device's standard SNMP trap/notification mechanism to alert on authentication failures. It is typically deployed on legacy dial-up/remote-access server chassis (NAS/modem pool equipment) in telecom or enterprise remote-access environments. Engineers can download the NMC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NMC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

US Robotics/Livingston-style dial-up Network Access Server (NAS)
modem pool/remote-access chassis

Monitoring Examples

An admin checks nmcCfgSystemTime/nmcCfgSystemDate and nmcTimezone/nmcDaySavingTime to confirm the NMC's clock is correct after a reboot, since a drifted clock would skew accounting and log timestamps. Enabling nmcCfgAuthFailTrapEnable causes the device to emit a trap whenever a dial-in authentication attempt fails, useful for spotting a brute-force attempt or a misconfigured user credential. If a WAN dial-out is failing repeatedly, nmcCfgNumWanRetries and nmcCfgWanRetryPause/nmcCfgWanRetrySuspendTime reveal whether the retry backoff is configured sensibly or is retrying too aggressively.

What Can Be Monitored

system clock/date/timezone setting
authentication failure trap status
WAN dial-out phone number and retry configuration
auto-configuration on power-up behavior

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises
experimental

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
usr	1.3.6.1.4.1.429
nas	1.3.6.1.4.1.429.1
nmc	1.3.6.1.4.1.429.1.2
nmcCfg	1.3.6.1.4.1.429.1.2.1
STR nmcCfgSystemTime	1.3.6.1.4.1.429.1.2.1.1	DisplayString	read-write	This parameter is used to set and read the current time as kept by the NMC's real-time clock. It should be set to the local time in the place where the chassis is physically located. The real-time clock has the capability of maintaining correct time for short durations without power.
STR nmcCfgSystemDate	1.3.6.1.4.1.429.1.2.1.2	DisplayString	read-write	This parameter is used to set and read the current date as kept by the NMC's real-time clock. It should be set to the local date where the chassis is physically located.
INT nmcGmtime	1.3.6.1.4.1.429.1.2.1.3	INTEGER	read-only	This object reflects the current time in Greenwich Mean Time (GMT). The value of this object is sent in USR's enterprise specific SNMP trap messages for use by the receiving Management Stations.
INT nmcTimezone	1.3.6.1.4.1.429.1.2.1.4	INTEGER	read-write	This object should be set to reflect the timezone in which the chassis is physically located. It is used in the conversion from local time to Greenwich Mean Time (GMT). The timezones are named for the number of hours by which GMT differs from local time. Default=gmtPlus0(21).
INT nmcCfgAuthFailTrapEnable	1.3.6.1.4.1.429.1.2.1.5	INTEGER	read-write	This object indicates whether or not the SNMP Proxy Agent running in the Network Management Card is to send a trap upon reception of an SNMP message that was not properly authenticated. MIB-I and II require a mechanism for enabling/disabling generation of this trap.
INT nmcDaySavingTime	1.3.6.1.4.1.429.1.2.1.6	INTEGER	read-write	The value of this object determines whether or not the NMC will honor daylight savings time when converting from local time to Greenwich Mean Time (GMT).
STR nmcCfgWanDialOutPhoneNum	1.3.6.1.4.1.429.1.2.1.7	DisplayString	read-write	This is the phone number that the NMC will use to dial a modem that is connected to the WAN port if there is no existing connection when the NMC tries to send and IP datagram out that port.
STR nmcCfgAtString	1.3.6.1.4.1.429.1.2.1.8	DisplayString	read-write	This object is the user defined AT string that will be used to configure a modem connected to the NMC's WAN port if the NMC needs to dial out to make a connection.
INT nmcPowerUpAutoCfgEnable	1.3.6.1.4.1.429.1.2.1.9	INTEGER	read-write	This parameter defines whether or not to automatically configure cards when they are inserted into the chassis or when the chassis is powered on. If set to do the autoconfigure, the values used to configure the cards will be those that were last saved to the NMC's NVRAM. For cards that do not match the values in NVRAM, those cards will be configured with default values.
INT nmcCfgNumWanRetries	1.3.6.1.4.1.429.1.2.1.10	INTEGER	read-write	This will specify the number of attempts to be made by port_write_task() to send the packet out of the WAN port while doing a dial up connection. The default is 0 which means the number of retries is disabled and it will keep trying to transmit the same packet for ever until it succeeds.
INT nmcCfgWanRetryPause	1.3.6.1.4.1.429.1.2.1.11	INTEGER	read-write	The amount of time in seconds that the NMC will pause between attempts to transmit a packet. The default value for this object is 30.
INT nmcCfgWanRetrySuspendTime	1.3.6.1.4.1.429.1.2.1.12	INTEGER	read-write	The Time period in seconds for which the WAN port should suspend its attempts to send out the packet. This time period applies when the number of failures has reached a configured maximum. It may resume its retries after the time period.
INT nmcCfgNumFailBefSuspend	1.3.6.1.4.1.429.1.2.1.13	INTEGER	read-write	The number of connection failures to allow before suspending retries.
INT nmcCfgLogSrvrSelect	1.3.6.1.4.1.429.1.2.1.14	INTEGER	read-only	The server selection for event logging. Default=none(3).
IP nmcCfgLogPriSrvrAddr	1.3.6.1.4.1.429.1.2.1.15	IpAddress	read-write	The primary logging server's IP address.
IP nmcCfgLogSecSrvrAddr	1.3.6.1.4.1.429.1.2.1.16	IpAddress	read-write	The secondary logging server's IP address.
INT nmcCfgLogUdpPortNum	1.3.6.1.4.1.429.1.2.1.17	INTEGER	read-write	The logging server's UDP port number. Default=1646.
INT nmcCfgLogRetryCnt	1.3.6.1.4.1.429.1.2.1.18	INTEGER	read-write	The NMC logging client transmission retry count. Default=3.
INT nmcCfgLogCallStatGrpSel	1.3.6.1.4.1.429.1.2.1.19	INTEGER	read-write	The optional call statistics groups included in log messages. Groups are Usage(1), Data Transfer(2), Performance(3), Operating Mode(4) and RMMIE(5). Group 1 is always sent. Groups 2-5 are optional. Default = none(1).
INT nmcCfgLogMD5Calc	1.3.6.1.4.1.429.1.2.1.20	INTEGER	read-write	This Optional Object will indicate to the accounting Client whether to calculate MD5 for accounting request message or not. default=disable.
INT nmcCfgTFTPTimeout	1.3.6.1.4.1.429.1.2.1.21	INTEGER	read-write	This object will be used to set up the timeout for the TFTP retries. The default would be 12 sec and the maximum allowed timeout would be 30 sec.
IP nmcCfgDnsPriSrvrAddr	1.3.6.1.4.1.429.1.2.1.22	IpAddress	read-write	The primary DNS server's IP address.
IP nmcCfgDnsSecSrvrAddr	1.3.6.1.4.1.429.1.2.1.23	IpAddress	read-write	The secondary DNS server's IP address.
IP nmcCfgLog3SrvrAddr	1.3.6.1.4.1.429.1.2.1.24	IpAddress	read-write	The third backup logging server IP address to use.
IP nmcCfgLog4SrvrAddr	1.3.6.1.4.1.429.1.2.1.25	IpAddress	read-write	The fourth backup logging server IP address to use.
IP nmcCfgLog5SrvrAddr	1.3.6.1.4.1.429.1.2.1.26	IpAddress	read-write	The fifth backup logging server IP address to use.
IP nmcCfgLog6SrvrAddr	1.3.6.1.4.1.429.1.2.1.27	IpAddress	read-write	The sixth backup logging server IP address to use.
IP nmcCfgLog7SrvrAddr	1.3.6.1.4.1.429.1.2.1.28	IpAddress	read-write	The seventh backup logging server IP address to use.
IP nmcCfgLog8SrvrAddr	1.3.6.1.4.1.429.1.2.1.29	IpAddress	read-write	The eighth backup logging server IP address to use.
STR nmcCfgLogSrvrName	1.3.6.1.4.1.429.1.2.1.30	DisplayString	read-write	The host name of the logging server. Used to resolve logging server IP addresses through DNS query requests from the resolver.
INT nmcCfgDnsRetryCnt	1.3.6.1.4.1.429.1.2.1.31	INTEGER	read-write	The maximum number of retries that will be attempted to query a DNS before trying the secondary DNS.
INT nmcCfgDnsUdpPortNum	1.3.6.1.4.1.429.1.2.1.32	INTEGER	read-write	The logging server's UDP port number. Default=53.
INT nmcCfgDnsSrvrSelect	1.3.6.1.4.1.429.1.2.1.33	INTEGER	read-only	The server selection for DNS. Default=none(1).
INT nmcCfgLogDnsEna	1.3.6.1.4.1.429.1.2.1.34	INTEGER	read-write	Indicates whether logging server host address DNS resolution is enabled or disabled. Disabled, the logging server addresses are taken from the log server address objects.
INT nmcCfgLogStatusInterval	1.3.6.1.4.1.429.1.2.1.35	INTEGER	read-write	This value defines the interval in seconds between Status-Server requests for a failed RADIUS Accounting server connection. Default=30.
INT nmcCfgDnsSrvrFailure	1.3.6.1.4.1.429.1.2.1.36	INTEGER	read-only	This value defines the failure reason for last failure of DNS resolver query.
INT nmcCfgLogSrvrFailure	1.3.6.1.4.1.429.1.2.1.37	INTEGER	read-only	This value defines the failure reason for the last failure of RADIUS accounting server access.
INT nmcCfgSessionIDNewFmt	1.3.6.1.4.1.429.1.2.1.38	INTEGER	read-write	This Object is used to Enable/Disable the New Session ID Format. Default is Disable.
nmcStat	1.3.6.1.4.1.429.1.2.2
INT nmcStatStatus	1.3.6.1.4.1.429.1.2.2.1	INTEGER	read-only	This object will indicate the general status or health of the Network Management Card.
INT nmcStatDramInstalled	1.3.6.1.4.1.429.1.2.2.2	INTEGER	read-only	This object indicates the amount of dynamic RAM currently installed on the Network Management Card. The units for this value are kilobytes.
INT nmcStatNVRAMInstalled	1.3.6.1.4.1.429.1.2.2.3	INTEGER	read-only	This object indicates the amount of non-volatile RAM currently installed on the Network Management Card. The units for this value are kilobytes.
INT nmcStatEventId	1.3.6.1.4.1.429.1.2.2.4	INTEGER	read-only	This value increments once for each network management event detected by the NMC. It is used to correlate SNMP traps with events that occured in the system.
INT nmcStatTemperature	1.3.6.1.4.1.429.1.2.2.5	INTEGER	read-only	This object reflects the current temperature in the NAS chassis, as detected by the NMC. The value of this object indicates the temperature in degree Celcius.
CTR nmcStatPowerUpTstFailures	1.3.6.1.4.1.429.1.2.2.6	Counter	read-only	This object contains the number of power up tests which failed during the power up of the NMC card.
INT nmcStatPowerUpTstFailBMap	1.3.6.1.4.1.429.1.2.2.7	INTEGER	read-only	This object defines a bit map which contains a one in the postion that indicates a power up test failure. The number returned is an integer that represents which power up test(s) that have failed. (e.g. a return value of three would mean power up tests 1 & 2 failed since bits 00000011 in the least significant byte would be set.)
INT nmcStatTestResult	1.3.6.1.4.1.429.1.2.2.8	INTEGER	read-only	This object contains the bit mapped result of the request to perform a self test. A non zero value indicates that there has been one or more self test failures.
STR nmcStatCompSwVer	1.3.6.1.4.1.429.1.2.2.9	DisplayString	read-only	This object contains the software compatibility version.
INT nmcStatPktBusClkSrc	1.3.6.1.4.1.429.1.2.2.10	INTEGER	read-only	The source of the backplane packet bus clock.
INT nmcStatNmcPktBusClk	1.3.6.1.4.1.429.1.2.2.11	INTEGER	read-only	The NMC's packet bus clock status.
INT nmcStatRedLed	1.3.6.1.4.1.429.1.2.2.12	INTEGER	read-only	This Object will return the Reason why the Hub Status LED is RED.
INT nmcAuxIn1Sts	1.3.6.1.4.1.429.1.2.2.13	INTEGER	read-only	This Object shows status of Aux Input port1.
INT nmcAuxIn2Sts	1.3.6.1.4.1.429.1.2.2.14	INTEGER	read-only	This Object shows status of Aux Input port2.
INT nmcAuxOut1Sts	1.3.6.1.4.1.429.1.2.2.15	INTEGER	read-only	This Object shows status of Aux Output port1.
INT nmcAuxOut2Sts	1.3.6.1.4.1.429.1.2.2.16	INTEGER	read-only	This Object shows status of Aux Output port2.
nmcTrap	1.3.6.1.4.1.429.1.2.3
INT nmcTrapSequenceNumber	1.3.6.1.4.1.429.1.2.3.1	INTEGER	read-only	This object increments every time a trap is generated by the NMC. This object is sent in the var-bind list of each trap and can be used by management stations to detect when a trap has been lost.
nmcTrapDestTable	1.3.6.1.4.1.429.1.2.3.2		not-accessible	This table defines the places to which traps are to be sent. These places may refer to management consoles, or other alarm collection processes.
nmcTrapDestEntry	1.3.6.1.4.1.429.1.2.3.2.1		not-accessible	There is an entry in this table for each destination to which the NMC is to send SNMP traps.
IP nmcTrapDestIP	1.3.6.1.4.1.429.1.2.3.2.1.1	IpAddress	read-only	This object identifies the IP address to be used for sending traps to the destination identified by nmcTrapDestDescr.
OCT nmcTrapDestCommunity	1.3.6.1.4.1.429.1.2.3.2.1.2	OCTET STRING	read-write	This object identifies the community string to be used when sending traps to the destination identified by nmcTrapDestDescr.
STR nmcTrapDestDescr	1.3.6.1.4.1.429.1.2.3.2.1.3	DisplayString	read-write	This object contains a plain text description of the trap destination to which this entry pertains.
INT nmcArTrapId	1.3.6.1.4.1.429.1.2.3.3	INTEGER	read-only	A single user defined value can be configured through AutoResponse script MIB objects to be sent to the management stations when a NMC AutoResponse SNMP TRAP occurs.
nmcCmd	1.3.6.1.4.1.429.1.2.4
OCT nmcCmdMgtStationId	1.3.6.1.4.1.429.1.2.4.1	OCTET STRING	read-write	This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with ds0CmdReqId and ds0CmdResult to detect interference from other MSs.
INT nmcCmdReqId	1.3.6.1.4.1.429.1.2.4.2	INTEGER	read-write	This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this Network Management Card. If the request-id is unknown or undefined, this object contains the value zero.
INT nmcCmdFunction	1.3.6.1.4.1.429.1.2.4.3	INTEGER	read-write	This object contains the value which decsribe the command which is being invoked.
INT nmcCmdForce	1.3.6.1.4.1.429.1.2.4.4	INTEGER	read-write	In some cases, the Network Managment Card may be in a state such that certain commands could adversely affect operations. In such cases, a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings, this object can be set to force in a subsequent issue of the command to cause the command to be carried out regardless of its potentially hazzardous effects.
OCT nmcCmdParam	1.3.6.1.4.1.429.1.2.4.5	OCTET STRING	read-write	This object contains parameters that are specific to the particular command being issued. In some cases, there will be no additional parameters required.
INT nmcCmdResult	1.3.6.1.4.1.429.1.2.4.6	INTEGER	read-only	This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset.
INT nmcCmdCode	1.3.6.1.4.1.429.1.2.4.7	INTEGER	read-only	The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful. In the case of tests, a bit mapped result of each of the sub-tests performed appears in the nmcStatTestResult object.
nmcHs	1.3.6.1.4.1.429.1.2.6
STR nmcHsDialInOutNamePrompt	1.3.6.1.4.1.429.1.2.6.1	DisplayString	read-write	This is the first prompt that appears when users establish a connection with a security modem. It should serve to identify the system and prompt users to enter their name.
STR nmcHsDialInOutPsswdPrompt	1.3.6.1.4.1.429.1.2.6.2	DisplayString	read-write	This prompt appears after a valid response has been made to the previous prompt (i.e., name string followed by CR/LF), and prompts users to enter their password.
STR nmcHsDialBackNamePrompt	1.3.6.1.4.1.429.1.2.6.3	DisplayString	read-write	This prompt only appears when users are configured for dial back security (to either a stored or entered number). It is also only issued when the Request Login Validation on Dial-Back field is enabled for the user in the RADIUS user database. This prompt should be different than the name prompt used when users first log into the system.
STR nmcHsDialBackPsswdPrompt	1.3.6.1.4.1.429.1.2.6.4	DisplayString	read-write	This prompt appears after a valid response to the prior prompt, and prompts users to enter their password.
STR nmcHsDialBackPhonePrompt	1.3.6.1.4.1.429.1.2.6.5	DisplayString	read-write	This prompt only appears if you have configured the user for dial back entered mode in the RADIUS user database. It prompts the user to enter the phone number at which the system can call them back.
STR nmcHsDialBackPendPrompt	1.3.6.1.4.1.429.1.2.6.6	DisplayString	read-write	This message only appears if you configure users for a dial back mode (to either a stored or entered number) in the RADIUS user database. It confirms to users that they have logged in successfully, and lets them know that the system has reserved a modem to call them back.
STR nmcHsMdmSelectPrompt	1.3.6.1.4.1.429.1.2.6.7	DisplayString	read-write	This message only appears if a user is configured for dial back in the RADIUS database and that this record has the Request Dial Back Modem Selection field enabled. The system displays a list of allowed dial back modems that have been entered for this user. Users must enter the number that appears on the menu next to their choice.
STR nmcHsLoginFailedMsg	1.3.6.1.4.1.429.1.2.6.8	DisplayString	read-write	This message appears when users fail to enter a valid name/password combination.
STR nmcHsPhoneRestrictPrompt	1.3.6.1.4.1.429.1.2.6.9	DisplayString	read-write	This message appears when users are prompted for a dial back phone number and the entered number violates the allowed numbers specified in the Call Restriction List.
STR nmcHsInvalidMdmSelecMsg	1.3.6.1.4.1.429.1.2.6.10	DisplayString	read-write	This message appears when users configured for dial back with the Request Dial-Back Modem Selection field enabled, select a modem to which they are not allowed access (as specified in the list of allowed Dial-Back modems).
STR nmcHsNoMdnsAvailMsg	1.3.6.1.4.1.429.1.2.6.11	DisplayString	read-write	This message appears when the system is unable to reserve a modem for dial-back that was either selected by the user or defined in it's list of Allowed Dial Back modems.
STR nmcHsConnectSuccessMsg	1.3.6.1.4.1.429.1.2.6.12	DisplayString	read-write	This message confirms that users have successfully compleated their login and may proceed with either their dial-in or dial-out call.
STR nmcHsNewPasswordPrompt	1.3.6.1.4.1.429.1.2.6.13	DisplayString	read-write	This prompt only appears when a users password has expired. It is issued once for the new password and then again for re-issue of the new password.
STR nmcHsChangePasswordMsg	1.3.6.1.4.1.429.1.2.6.14	DisplayString	read-write	This message appears during name/password authentication when the user's password has expired. This message is immediately followed by the enter new password prompt.
INT nmcHsPromptRspTimeout	1.3.6.1.4.1.429.1.2.6.15	INTEGER	read-write	This value represents the number of seconds in which users must respond to each prompt. Users failing to respond within the specified time are disconnected, and a Dial Security login failure trap is generated. Any login failures of this type also apply to the user blacklist function if a valid user name has been entered. This field takes precidence over the modem's inactivity timer during a security login. The default for this object is 30(seconds).
INT nmcHsPromptRspAttempts	1.3.6.1.4.1.429.1.2.6.16	INTEGER	read-write	This value represents the number of tries the user is allowed per prompt during any one security session. If this number is reached, the call is terminated. For the purposes of retry limiting, the user name and password are treated as a single prompt. This means that if a valid name and an invalid password are entered, the failure is counted against both the Prompt Response Attempt Limit and the Failed Logins Before Blacklist. The default for this object is 1.
INT nmcHsPromptRspEchoEna	1.3.6.1.4.1.429.1.2.6.17	INTEGER	read-write	When enabled, this option instructs the NMC to echo the user's typed responses back to the users screen. Password responses are echoed as 'X's. The default for this option is disabled.
INT nmcHsDialBackDelay	1.3.6.1.4.1.429.1.2.6.18	INTEGER	read-write	This object defines the number of seconds to wait between successive dial back attempts; i.e., the time the NMC waits before attempting the next dial back when it was unable to connect. The default is 30 seconds.
INT nmcHsDialBackAttempts	1.3.6.1.4.1.429.1.2.6.19	INTEGER	read-write	This object defines the number of times that the NMC will attempt to dial back a dial in user configured for dial back when successive dial back attempts fail. The default for this object is one.
IP nmcHsSecuritySrvrAddr	1.3.6.1.4.1.429.1.2.6.20	IpAddress	read-write	This object identifies the IP address of the Primary RADIUS security server where the NMC RADIUS client sends requests.
INT nmcHsSecuritySrvrPort	1.3.6.1.4.1.429.1.2.6.21	INTEGER	read-write	This object identifies the UDP port where the NMC's RADIUS client issues requests to the RADIUS security server. The default port is 1645.
INT nmcHsSecuritySrvrRetries	1.3.6.1.4.1.429.1.2.6.22	INTEGER	read-write	This object identifies the number of retries that the NMC's RADIUS client will preform when attempting to send requests to a RADIUS security server. The default retry number is 1.
INT nmcHsMdmAttemptLimit	1.3.6.1.4.1.429.1.2.6.23	INTEGER	read-write	This value represents the number of times an attempt can be made to login on any one modem without success. If this value is exceeded and the mdmLoginAttemptLimExceeded trap has been enabled, then the mdmLoginAttemptLimExceeded trap is generated. Default = 3.
INT nmcHsServerUnavailable	1.3.6.1.4.1.429.1.2.6.24	INTEGER	read-write	This option specifies whether to deny or allow a call when a dial security server is unreachable. Default = denyCall(1).
INT nmcHsServerSelect	1.3.6.1.4.1.429.1.2.6.25	INTEGER	read-only	Server Selection for RADIUS Security. Default=none(3).
IP nmcHsSecondarySrvrAddr	1.3.6.1.4.1.429.1.2.6.26	IpAddress	read-write	This object identifies the IP address of the Secondary RADIUS Security Server.
INT nmcHsDiPasswdEnaDis	1.3.6.1.4.1.429.1.2.6.27	INTEGER	read-write	This Optional Object will Enable/Disable PASSWORD prompt for Dial-In Hub Security. Default is Enable(1).
IP nmcHsSecurity3SrvrAddr	1.3.6.1.4.1.429.1.2.6.28	IpAddress	read-write	This object identifies the IP address of the 3rd RADIUS Security backup server.
IP nmcHsSecurity4SrvrAddr	1.3.6.1.4.1.429.1.2.6.29	IpAddress	read-write	This object identifies the IP address of the 4th RADIUS Security backup server.
IP nmcHsSecurity5SrvrAddr	1.3.6.1.4.1.429.1.2.6.30	IpAddress	read-write	This object identifies the IP address of the 5th RADIUS Security backup server.
IP nmcHsSecurity6SrvrAddr	1.3.6.1.4.1.429.1.2.6.31	IpAddress	read-write	This object identifies the IP address of the 6th RADIUS Security backup server.
IP nmcHsSecurity7SrvrAddr	1.3.6.1.4.1.429.1.2.6.32	IpAddress	read-write	This object identifies the IP address of the 7th RADIUS Security backup server.
IP nmcHsSecurity8SrvrAddr	1.3.6.1.4.1.429.1.2.6.33	IpAddress	read-write	This object identifies the IP address of the 8th RADIUS Security backup server.
STR nmcHsSecuritySrvrName	1.3.6.1.4.1.429.1.2.6.34	DisplayString	read-write	Identifies the host name of the RADIUS Security server used to resolve IP addresses through DNS queries.
INT nmcHsSecuritySrvrDnsEna	1.3.6.1.4.1.429.1.2.6.35	INTEGER	read-write	Indicates RADIUS Security server IP addresses are resolved through DNS queries. If disabled, the Security server address objects are used. Default=disabled
INT nmcHsSecurityStatusInt	1.3.6.1.4.1.429.1.2.6.36	INTEGER	read-write	This value defines the interval in seconds between Status-Server requests for a failed RADIUS Security server connection. Default=30.
INT nmcHsSecurityFailure	1.3.6.1.4.1.429.1.2.6.37	INTEGER	read-only	This value defines the failure reason for the last failure of RADIUS Security server access.
nmcTe	1.3.6.1.4.1.429.1.2.7
INT nmcTeDialOutLoginFail	1.3.6.1.4.1.429.1.2.7.1	INTEGER	read-write	Enable/disable for the trap generated when a dial out login security session has failed.
INT nmcTeDialInLoginFail	1.3.6.1.4.1.429.1.2.7.2	INTEGER	read-write	Enable/disable for the trap generated when a dial in login security session has failed.
INT nmcTeDialOutRestrictNum	1.3.6.1.4.1.429.1.2.7.3	INTEGER	read-write	Enable/disable for the trap generated when a dial out security session has failed as a result of attempting to dial a restricted phone number.
INT nmcTeDialBackRestrictNum	1.3.6.1.4.1.429.1.2.7.4	INTEGER	read-write	Enable/disable for the trap generated when a dial back security session has failed as a result of attempting to dial a restricted phone number.
INT nmcTeUserBlacklist	1.3.6.1.4.1.429.1.2.7.5	INTEGER	read-write	Enable/disable for the trap generated when a security user has reached their final failed login attempt number and is now being blacklisted.
INT nmcTeUserBlacklistLogin	1.3.6.1.4.1.429.1.2.7.6	INTEGER	read-write	Enable/disable for the trap generated when a security login attempt by a currently blacklisted user has occurred.
INT nmcTeRespAttmptLimExceed	1.3.6.1.4.1.429.1.2.7.7	INTEGER	read-write	Enable/disable for the trap generated when a security user has failed to issue a valid response to a particular security prompt before the configured limit.
INT nmcTeLoginAttmptLimExceed	1.3.6.1.4.1.429.1.2.7.8	INTEGER	read-write	Enable/disable for the trap generated when a security session has failed because the indicated user does not appear in the security user database.
INT nmcTeLogSrvrLoss	1.3.6.1.4.1.429.1.2.7.9	INTEGER	read-write	Enable/disable for the trap generated when communication with a logging server has been lost.
INT nmcTeSecSrvrLoss	1.3.6.1.4.1.429.1.2.7.10	INTEGER	read-write	Enable/disable for the trap generated when communication with a security server has been lost.
INT nmcTeSinglePbClockFail	1.3.6.1.4.1.429.1.2.7.11	INTEGER	read-write	Enable/disable for the trap generated when the NMC detects that there is a packet bus clock failure in a single slot. Default=enable(1).
INT nmcTePbClockSwitch	1.3.6.1.4.1.429.1.2.7.12	INTEGER	read-write	Enable/disable for the trap generated when the NMC detects that there is a packet bus clock failure in multiple slots and the NMC has assumed the role of clock master. Default=enable(1).
INT nmcTePbClockFail	1.3.6.1.4.1.429.1.2.7.13	INTEGER	read-write	Enable/disable for the trap generated when the NMC detects that the packet bus clock on the NMC daughter board pcb has failed. Check status of nmcStatPktBusClkSrc to determine if the NMC was acting as clock master. Default=enable(1).
INT nmcTeDnsSrvrLoss	1.3.6.1.4.1.429.1.2.7.14	INTEGER	read-write	Enable/disable for the trap generated when communication with the primary and secondary DNS server has been lost.
INT nmcTeNtpSrvrLoss	1.3.6.1.4.1.429.1.2.7.15	INTEGER	read-write	Enable/disable for the trap generated when communication with all NTP servers has failed.
INT nmcTeNtpSrvrRestore	1.3.6.1.4.1.429.1.2.7.16	INTEGER	read-write	Enable/disable for the trap generated when communication with the NTP server has been restored.
INT nmcTeNtpSrvrDegraded	1.3.6.1.4.1.429.1.2.7.17	INTEGER	read-write	Enable/disable for the trap generated when communication with the primary NTP server has failed, but the secondary has been restored.
INT nmcTeDnsSrvrRestore	1.3.6.1.4.1.429.1.2.7.18	INTEGER	read-write	Enable/disable for the trap generated when communication with the primary DNS server has been restored. Default=disable.
INT nmcTeDnsSrvrDegraded	1.3.6.1.4.1.429.1.2.7.19	INTEGER	read-write	Enable/disable for the trap generated when communication with the primary DNS server has failed, but the secondary DNS server is operational. Default=disabled.
INT nmcTeLogSrvrRestore	1.3.6.1.4.1.429.1.2.7.20	INTEGER	read-write	Enable/disable for the trap generated when communication with a logging server has been restored.
INT nmcTeLogSrvrGroupOper	1.3.6.1.4.1.429.1.2.7.21	INTEGER	read-write	Enable/disable for the trap generated when the communication with the group of logging servers is operational with the primary server in service.
INT nmcTeLogSrvrGroupDegr	1.3.6.1.4.1.429.1.2.7.22	INTEGER	read-write	Enable/disable from the trap generated when the communication with the group of logging servers has degraded with a non-primary server in service.
INT nmcTeLogSrvrGroupNonOp	1.3.6.1.4.1.429.1.2.7.23	INTEGER	read-write	Enable/disable for the trap generated when the communication with the group of logging servers is non-operational.
INT nmcTeSecSrvrRestore	1.3.6.1.4.1.429.1.2.7.24	INTEGER	read-write	Enable/disable for the trap generated when communication with the RADIUS Security server has been restored. Default=disabled
INT nmcTeSecSrvrGroupOper	1.3.6.1.4.1.429.1.2.7.25	INTEGER	read-write	Enable/disable for the trap generated when communication to the RADIUS Security server group becomes operational. Default=disabled
INT nmcTeSecSrvrGroupDegr	1.3.6.1.4.1.429.1.2.7.26	INTEGER	read-write	Enable/disable for the trap generated when communication to the RADIUS Security server group becomes degraded because of failure to contact primary server. Default=disabled
INT nmcTeSecSrvrGroupNonOp	1.3.6.1.4.1.429.1.2.7.27	INTEGER	read-write	Enable/disable for the trap generated when communication to the RADIUS Security server group becomes non-operational because of failure to contact any Security servers. Default=disabled
nmcUiCfg	1.3.6.1.4.1.429.1.2.8
IP nmcUiCfgLanIPAddr	1.3.6.1.4.1.429.1.2.8.1	IpAddress	read-write	This contains the IP address of the LAN interface.
IP nmcUiCfgLanSubnetMask	1.3.6.1.4.1.429.1.2.8.2	IpAddress	read-write	This specifies the subnet mask for LAN interface.
IP nmcUiCfgWanIPAddr	1.3.6.1.4.1.429.1.2.8.3	IpAddress	read-write	This specifies the IP address for the WAN interface.
IP nmcUiCfgWanSubnetMask	1.3.6.1.4.1.429.1.2.8.4	IpAddress	read-write	This specifies the Subnet mask for the WAN interface.
IP nmcUiCfgDefaultGwyIP	1.3.6.1.4.1.429.1.2.8.5	IpAddress	read-write	This specifies the address of the Gateway to which the IP will forward those packets whose net ID does not match the net ID of either interface.
OCT nmcUiCfgLocalTrIeeeAddr	1.3.6.1.4.1.429.1.2.8.6	OCTET STRING	read-write	This gives the IEEE physical address of the Token Ring interface.
STR nmcUiCfgPrivateString	1.3.6.1.4.1.429.1.2.8.7	DisplayString	write-only	This specifies the SNMP read-write community string. Default='private'.
INT nmcUiCfgLanIfEnable	1.3.6.1.4.1.429.1.2.8.8	INTEGER	read-write	This parameter controls the enable/disable of the LAN interface.
STR nmcUiCfgPublicString	1.3.6.1.4.1.429.1.2.8.9	DisplayString	write-only	This specifies the SNMP read-only community string. Default='public'.
INT nmcUiCfgRouteEnable	1.3.6.1.4.1.429.1.2.8.10	INTEGER	read-write	This Parameter controls the ability of the NMC to route traffic between it's LAN and SLIP interfaces, Default = enable(1).
INT nmcUiCfgUiSlipCfg	1.3.6.1.4.1.429.1.2.8.11	INTEGER	read-write	This is used to configure the UI port as SLIP or UI. Default=UI.
IP nmcUiCfgWan2IpAddr	1.3.6.1.4.1.429.1.2.8.12	IpAddress	read-write	This contains the IP address of second SLIP port.
IP nmcUiCfgWan2SubnetMask	1.3.6.1.4.1.429.1.2.8.13	IpAddress	read-write	This contains SubnetMask for Second Slip port.
INT nmcUiCfgInactiveTime	1.3.6.1.4.1.429.1.2.8.14	INTEGER	read-write	This parameter is in minutes it is used as an Inactivity time on the UI port. The Default is 3 minutes and 0 minutes disables the feature.
INT nmcUiCfgPassword	1.3.6.1.4.1.429.1.2.8.15	INTEGER	read-write	This parameter is used to Enable or Disable the PASSWORD protection for UI functions. Default = disabled.
nmcAuth	1.3.6.1.4.1.429.1.2.9
nmcAuthAccTable	1.3.6.1.4.1.429.1.2.9.1		not-accessible	This table defines which management stations are allowed access to the NMC.
nmcAuthAccEntry	1.3.6.1.4.1.429.1.2.9.1.1		not-accessible	There is an entry for each management station allowd access to the NMC.
IP nmcAuthAccIpAddr	1.3.6.1.4.1.429.1.2.9.1.1.1	IpAddress	read-only	This is the IP address of the station allowed access to the NMC.
IP nmcAuthAccNetMask	1.3.6.1.4.1.429.1.2.9.1.1.2	IpAddress	read-write	This is the network mask of the station allowed access to the NMC.
STR nmcAuthAccDescr	1.3.6.1.4.1.429.1.2.9.1.1.3	DisplayString	read-write	This is the description of the station allowed access to the NMC.
nmcNtp	1.3.6.1.4.1.429.1.2.10
IP nmcNtpSrvrPrimAddr	1.3.6.1.4.1.429.1.2.10.1	IpAddress	read-write	The primary NTP server's IP address.
IP nmcNtpSrvrSecdAddr	1.3.6.1.4.1.429.1.2.10.2	IpAddress	read-write	The secondary NTP server's IP address. This server is only accessed when responses from the primary have failed.
INT nmcNtpSyncInterval	1.3.6.1.4.1.429.1.2.10.3	INTEGER	read-write	The synchronization interval between successive NTP requests in seconds.
INT nmcNtpOperationalMode	1.3.6.1.4.1.429.1.2.10.4	INTEGER	read-write	The operational mode of the NTP client. In unicast mode, the NTP requests the current time from the primary NTP and uses the secondary NTP as a backup.
INT nmcNtpLastSyncTime	1.3.6.1.4.1.429.1.2.10.5	INTEGER	read-only	The time since the last successful NTP synchronization in seconds.
INT nmcNtpLastSyncServer	1.3.6.1.4.1.429.1.2.10.6	INTEGER	read-only	The last NTP server used to successfully synchronize time.
INT nmcNtpLastFailedTime	1.3.6.1.4.1.429.1.2.10.7	INTEGER	read-only	The time since the last failed NTP synchronization attempt in seconds.
INT nmcNtpLastFailedServer	1.3.6.1.4.1.429.1.2.10.8	INTEGER	read-only	The last NTP server used in a failed attempt to synchronize time.

RFC description

Configures system time, date, and timezone settings on 3COM Network Management Card controllers.

Start monitoring US Robotics/Livingston-style dial-up Network Access Server (NAS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NMC-MIB

What Is NMC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description