UBQS-SYSLOG-MIB

All MIBs › UBQS-SYSLOG-MIB

Organization: Ubiquoss Corp.

Last Updated: 2010-12-17

Description: MIB for configuring syslog server destinations, severity filtering, and retrieving system log information from Ubiquoss network devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBQS-SYSLOG-MIB?

UBQS-SYSLOG-MIB is a Ubiquoss enterprise MIB for configuring and retrieving syslog information on Ubiquoss network devices, covering syslog server destinations and severity-level filtering. It exposes configuration data (which syslog servers are targeted, what severities are forwarded) as well as status information about the syslog subsystem itself. Its role in monitoring hardware/software status is indirect but important: it is the mechanism by which the device's own software event log (errors, warnings, informational messages about hardware faults or configuration changes) gets exported for centralized review, making it a key piece of overall fault visibility. It depends on the shared UBIQUOSS-SMI enterprise root and standard SNMPv2-CONF conformance conventions. It is typically deployed on Ubiquoss switches integrated into a centralized logging infrastructure alongside a syslog collector, making UBQS-SYSLOG-MIB SNMP monitoring a standard component of fault-visibility deployments.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBQS-SYSLOG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss network switch

Monitoring Examples

An admin would inspect ubiSyslogServers (under ubiSyslogConfiguration) to confirm the correct remote syslog collector IP addresses and severity filters are configured, ensuring critical hardware or software fault messages are actually being forwarded off-device. If a device stops appearing in the central syslog collector, checking ubiSyslogMIBObjects for a misconfigured or removed server entry would be a first troubleshooting step.

What Can Be Monitored

configured syslog server destinations
syslog severity filtering
syslog subsystem configuration status

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

From UBQS-SMI

ubiMgmtv2

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubiSyslogMIB	1.3.6.1.4.1.7800.100.15			The UBQS-SYSLOG-MIB is used to get the syslog information.
ubiSyslogMIBNotificationPrefix	1.3.6.1.4.1.7800.100.15.0
ubiSyslogMIBObjects	1.3.6.1.4.1.7800.100.15.1
ubiSyslogConfiguration	1.3.6.1.4.1.7800.100.15.1.1
T/F ubiSyslogConsoleEnable	1.3.6.1.4.1.7800.100.15.1.1.1	TruthValue	read-write	Indicates whether the system writes the syslog at colsole.
UBI ubiSyslogConsoleSeverity	1.3.6.1.4.1.7800.100.15.1.1.2	UbiSyslogSeverity	read-write	Indicates which syslog severity levels will be processed. 0 'none 1 'emergency' : system is unusable 2 'alert' : action must be taken immediately 3 'critical' : critical conditions 4 'error' : error conditions 5 'warning' : warning conditions 6 'notice' : normal but significant condition 7 'informational': informational messages 8 'debug' : debug-level messages.
T/F ubiSyslogTerminalEnable	1.3.6.1.4.1.7800.100.15.1.1.3	TruthValue	read-write	Indicates whether the system writes the syslog at terminal.
UBI ubiSyslogTerminalSeverity	1.3.6.1.4.1.7800.100.15.1.1.4	UbiSyslogSeverity	read-write	Indicates which syslog severity levels will be processed. 0 'none 1 'emergency' : system is unusable 2 'alert' : action must be taken immediately 3 'critical' : critical conditions 4 'error' : error conditions 5 'warning' : warning conditions 6 'notice' : normal but significant condition 7 'informational': informational messages 8 'debug' : debug-level messages.
T/F ubiSyslogBufferdEnable	1.3.6.1.4.1.7800.100.15.1.1.5	TruthValue	read-write	Indicates whether the system writes the syslog at buffer.
UBI ubiSyslogBuffredSeverity	1.3.6.1.4.1.7800.100.15.1.1.6	UbiSyslogSeverity	read-write	Indicates which syslog severity levels will be processed. 0 'none 1 'emergency' : system is unusable 2 'alert' : action must be taken immediately 3 'critical' : critical conditions 4 'error' : error conditions 5 'warning' : warning conditions 6 'notice' : normal but significant condition 7 'informational': informational messages 8 'debug' : debug-level messages.
T/F ubiSyslogTrapEnable	1.3.6.1.4.1.7800.100.15.1.1.7	TruthValue	read-write	Indicates whether the system writes the syslog for trap.
UBI ubiSyslogTrapSeverity	1.3.6.1.4.1.7800.100.15.1.1.8	UbiSyslogSeverity	read-write	Indicates which syslog severity levels will be processed. 0 'none 1 'emergency' : system is unusable 2 'alert' : action must be taken immediately 3 'critical' : critical conditions 4 'error' : error conditions 5 'warning' : warning conditions 6 'notice' : normal but significant condition 7 'informational': informational messages 8 'debug' : debug-level messages.
I32 ubiSyslogBufferSize	1.3.6.1.4.1.7800.100.15.1.1.9	Integer32	read-write	Specifies the syslog buffer size.
INT ubiSyslogFacility	1.3.6.1.4.1.7800.100.15.1.1.10	INTEGER	read-write	Indicates the syslog facility.
ubiSyslogServers	1.3.6.1.4.1.7800.100.15.1.2
ubiSyslogServerTable	1.3.6.1.4.1.7800.100.15.1.2.1		not-accessible	This table contains entries that allow application to configure syslog servers for the system.
ubiSyslogServerEntry	1.3.6.1.4.1.7800.100.15.1.2.1.1		not-accessible	An entry containing information about syslog servers configured for the system.
IPt ubiSyslogServerAddrType	1.3.6.1.4.1.7800.100.15.1.2.1.1.1	InetAddressType	not-accessible	The type of server address. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention.
IP ubiSyslogServerAddr	1.3.6.1.4.1.7800.100.15.1.2.1.1.2	InetAddress	read-only	The address of this syslog server.
ROW ubiSyslogServerRowStatus	1.3.6.1.4.1.7800.100.15.1.2.1.1.3	RowStatus	read-create	The row status of this syslog server.
ubiSyslogMIBConformance	1.3.6.1.4.1.7800.100.15.2
ubiSyslogMIBCompliances	1.3.6.1.4.1.7800.100.15.2.1
ubiSyslogMIBGroups	1.3.6.1.4.1.7800.100.15.2.2

RFC description

Retrieves syslog information from Ubiquoss network devices with severity levels and message formatting consistent with RFC 3164.

Start monitoring Ubiquoss network switch (syslog server destination/severity-filter config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBQS-SYSLOG-MIB

What Is UBQS-SYSLOG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description