All MIBs › UBQS-SYSLOG-MIB › ubiSyslogBuffredSeverity
ubiSyslogBuffredSeverity
Module: UBQS-SYSLOG-MIB
OID (symbolic): UBQS-SYSLOG-MIB::ubiSyslogBuffredSeverity
OID (numeric): 1.3.6.1.4.1.7800.100.15.1.1.6
Node type: OBJECT-TYPE
Type: UbiSyslogSeverity
Access: read-write
Description: Indicates which syslog severity levels will be processed. 0 'none 1 'emergency' : system is unusable 2 'alert' : action must be taken immediately 3 'critical' : critical conditions 4 'error' : error conditions 5 'warning' : warning conditions 6 'notice' : normal but significant condition 7 'informational': informational messages 8 'debug' : debug-level messages.
What is ubiSyslogBuffredSeverity?
Sets the minimum syslog severity level that will be processed for the internal log buffer. Admins tune this to control how much detail is retained in the limited-size buffer, since a lower threshold captures more but fills the buffer faster. Setting this to error(4) would retain only error-and-above severity messages in the buffer, extending how far back the buffer's history reaches.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.15.1.1.6 snmpwalk -v2c -c public <target> UBQS-SYSLOG-MIB::ubiSyslogBuffredSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.15.1.1.6.1 snmpget -v2c -c public <target> UBQS-SYSLOG-MIB::ubiSyslogBuffredSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.15.1.1.6.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ubiSyslogBuffredSeverity.1
Start monitoring Ubiquoss network switch (syslog server destination/severity-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-SYSLOG-MIB::ubiSyslogBuffredSeverity OID value, configure state conditions and alerts, and monitor any Ubiquoss network switch (syslog server destination/severity-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.15 | ubiSyslogMIB | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1 | ubiSyslogMIBObjects | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1.1 | ubiSyslogConfiguration | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1.1.6 | ubiSyslogBuffredSeverity | UBQS-SYSLOG-MIB |