All MIBs › UBQS-SYSLOG-MIB › ubiSyslogTrapSeverity
ubiSyslogTrapSeverity
Module: UBQS-SYSLOG-MIB
OID (symbolic): UBQS-SYSLOG-MIB::ubiSyslogTrapSeverity
OID (numeric): 1.3.6.1.4.1.7800.100.15.1.1.8
Node type: OBJECT-TYPE
Type: UbiSyslogSeverity
Access: read-write
Description: Indicates which syslog severity levels will be processed. 0 'none 1 'emergency' : system is unusable 2 'alert' : action must be taken immediately 3 'critical' : critical conditions 4 'error' : error conditions 5 'warning' : warning conditions 6 'notice' : normal but significant condition 7 'informational': informational messages 8 'debug' : debug-level messages.
What is ubiSyslogTrapSeverity?
Sets the minimum syslog severity level that will trigger an SNMP trap when ubiSyslogTrapEnable is true. Admins typically set this higher than the console or buffer severities, so only significant events generate traps and flood the NMS with informational noise. Setting this to critical(3) would mean only critical-and-above events, not routine warnings or notices, generate SNMP traps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.15.1.1.8 snmpwalk -v2c -c public <target> UBQS-SYSLOG-MIB::ubiSyslogTrapSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.15.1.1.8.1 snmpget -v2c -c public <target> UBQS-SYSLOG-MIB::ubiSyslogTrapSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.15.1.1.8.1 s <value>
Start monitoring Ubiquoss network switch (syslog server destination/severity-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-SYSLOG-MIB::ubiSyslogTrapSeverity OID value, configure state conditions and alerts, and monitor any Ubiquoss network switch (syslog server destination/severity-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.15 | ubiSyslogMIB | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1 | ubiSyslogMIBObjects | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1.1 | ubiSyslogConfiguration | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1.1.8 | ubiSyslogTrapSeverity | UBQS-SYSLOG-MIB |