All MIBs › UBQS-SYSLOG-MIB › ubiSyslogTerminalSeverity
ubiSyslogTerminalSeverity
Module: UBQS-SYSLOG-MIB
OID (symbolic): UBQS-SYSLOG-MIB::ubiSyslogTerminalSeverity
OID (numeric): 1.3.6.1.4.1.7800.100.15.1.1.4
Node type: OBJECT-TYPE
Type: UbiSyslogSeverity
Access: read-write
Description: Indicates which syslog severity levels will be processed. 0 'none 1 'emergency' : system is unusable 2 'alert' : action must be taken immediately 3 'critical' : critical conditions 4 'error' : error conditions 5 'warning' : warning conditions 6 'notice' : normal but significant condition 7 'informational': informational messages 8 'debug' : debug-level messages.
What is ubiSyslogTerminalSeverity?
Sets the minimum syslog severity level that will be processed for terminal output. Admins tune this independently from the console severity, for example keeping a quieter console but a more verbose terminal session during active troubleshooting. Setting this to debug(8) during a troubleshooting session would surface the most granular log detail in the admin's terminal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.15.1.1.4 snmpwalk -v2c -c public <target> UBQS-SYSLOG-MIB::ubiSyslogTerminalSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.15.1.1.4.1 snmpget -v2c -c public <target> UBQS-SYSLOG-MIB::ubiSyslogTerminalSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.15.1.1.4.1 s <value>
Start monitoring Ubiquoss network switch (syslog server destination/severity-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-SYSLOG-MIB::ubiSyslogTerminalSeverity OID value, configure state conditions and alerts, and monitor any Ubiquoss network switch (syslog server destination/severity-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.15 | ubiSyslogMIB | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1 | ubiSyslogMIBObjects | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1.1 | ubiSyslogConfiguration | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1.1.4 | ubiSyslogTerminalSeverity | UBQS-SYSLOG-MIB |