All MIBs › UBQS-SYSLOG-MIB › ubiSyslogConsoleSeverity
ubiSyslogConsoleSeverity
Module: UBQS-SYSLOG-MIB
OID (symbolic): UBQS-SYSLOG-MIB::ubiSyslogConsoleSeverity
OID (numeric): 1.3.6.1.4.1.7800.100.15.1.1.2
Node type: OBJECT-TYPE
Type: UbiSyslogSeverity
Access: read-write
Description: Indicates which syslog severity levels will be processed. 0 'none 1 'emergency' : system is unusable 2 'alert' : action must be taken immediately 3 'critical' : critical conditions 4 'error' : error conditions 5 'warning' : warning conditions 6 'notice' : normal but significant condition 7 'informational': informational messages 8 'debug' : debug-level messages.
What is ubiSyslogConsoleSeverity?
Sets the minimum syslog severity level, from emergency(1) through debug(8), that will be processed for console output. Admins raise this threshold to reduce console noise, showing only critical or error-level events, or lower it to see more verbose informational and debug messages. Setting this to warning(5) would show warning-and-above messages on the console while suppressing routine notice and informational chatter.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.15.1.1.2 snmpwalk -v2c -c public <target> UBQS-SYSLOG-MIB::ubiSyslogConsoleSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.15.1.1.2.1 snmpget -v2c -c public <target> UBQS-SYSLOG-MIB::ubiSyslogConsoleSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.15.1.1.2.1 s <value>
Start monitoring Ubiquoss network switch (syslog server destination/severity-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-SYSLOG-MIB::ubiSyslogConsoleSeverity OID value, configure state conditions and alerts, and monitor any Ubiquoss network switch (syslog server destination/severity-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.15 | ubiSyslogMIB | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1 | ubiSyslogMIBObjects | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1.1 | ubiSyslogConfiguration | UBQS-SYSLOG-MIB |
| 1.3.6.1.4.1.7800.100.15.1.1.2 | ubiSyslogConsoleSeverity | UBQS-SYSLOG-MIB |