UBQS-ENVMON-MIB

All MIBs › UBQS-ENVMON-MIB

Organization: Ubiquoss Corp.

Last Updated: 2009-06-25

Category: Building Automation and Environmental, Ubiquoss Enterprise Networking

Description: Monitors Ubiquoss environmental sensors including temperature, voltage, fan speed, and power status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBQS-ENVMON-MIB?

UBQS-ENVMON-MIB is a Ubiquoss vendor MIB dedicated to environmental monitoring of their network appliances (typically switches, OLTs, or access nodes). It exposes environmental sensor data such as temperature, voltage, fan speed, and power-supply status collected from the device chassis. This is a core hardware-health MIB: it is used specifically to watch for overheating, voltage irregularities, fan failure, and power-supply problems that can precede a hardware fault or unplanned outage, and it defines notification objects so the device can trap out alerts when thresholds are crossed. It has no stated dependency on other MIBs beyond the standard SNMPv2 SMI/notification conventions used across the Ubiquoss MIB family (e.g., paired with UBQS-SYSTEM-MIB for identity context). It is deployed on Ubiquoss switches and access equipment in telecom central offices or cabinets where environmental conditions directly affect equipment reliability, and administrators often start with a UBQS-ENVMON-MIB download to load the module directly into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBQS-ENVMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss switches
Ubiquoss access/OLT network appliances

Monitoring Examples

An administrator would poll under ubiEnvMonObjects for current temperature, voltage, and fan-speed readings, and configure ubiEnvMonMIBNotificationEnables to control which conditions trigger traps defined under ubiEnvMonMIBNotifications. A sustained rise in chassis temperature or a fan-speed reading dropping toward zero would signal an imminent thermal or cooling failure worth escalating before the device shuts down or degrades. ubiEnvMonMIBCompliances defines the conformance requirements an agent must meet to claim support for this environmental monitoring feature set.

What Can Be Monitored

chassis temperature
voltage levels
fan speed/status
power supply status
environmental notification/trap enables

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

From UBQS-SMI

ubiMgmtv2

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using ubiEnvMonTemperatureValue OID:

Select an Ubiquoss switches, Ubiquoss access/OLT network appliance (temperature/voltage/fan/power-supply status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ubiEnvMonTemperatureValue into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The current measurement of the testpoint being instrumented. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the reported value exceeds the level expected for healthy operation, since sustained high temperature often precedes thermal shutdown or hardware degradation. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
T/F ubiEnvMonEnableFanStatusChange	1.3.6.1.4.1.7800.100.2.2.2	TruthValue	read-write	This variable indicates whether the system produces the ubiEnvMonFanStatusChangeNotif. A false value prevents fan notifications from being sent by this entity.
T/F ubiEnvMonEnableSupplyChannelStatusChange	1.3.6.1.4.1.7800.100.2.2.4	TruthValue	read-write	This variable indicates whether the system produces the ubiEnvMonSuppExtStatusChangeNotif. A false value prevents redundant supply notifications from being generated by this system.
T/F ubiEnvMonEnableSupplyStatusChange	1.3.6.1.4.1.7800.100.2.2.3	TruthValue	read-write	This variable indicates whether the system produces the ubiEnvMonSuppStatusChangeNotif. A false value prevents redundant supply notifications from being generated by this system.
T/F ubiEnvMonEnableTempStatusChange	1.3.6.1.4.1.7800.100.2.2.1	TruthValue	read-write	This variable indicates whether the system produces the ubiEnvMonTempStatusChangeNotif. A false value prevents temperature notifications from being sent by this entity.
INT ubiEnvMonExternalAlarmAc	1.3.6.1.4.1.7800.100.2.1.3.1.5	INTEGER	read-only	The power supply convertor AC. nomal (1) fail (2)
INT ubiEnvMonExternalAlarmUnit	1.3.6.1.4.1.7800.100.2.1.3.1.6	INTEGER	read-only	The power supply convertor unit. nomal (1) fail (2)
STR ubiEnvMonFanDescr	1.3.6.1.4.1.7800.100.2.1.2.1.2	DisplayString	read-only	Textual description of the fan being instrumented.
ubiEnvMonFanEntry	1.3.6.1.4.1.7800.100.2.1.2.1		not-accessible	An entry in the fan status table, representing the status of the associated fan maintained by the environmental monitor.
I32 ubiEnvMonFanIndex	1.3.6.1.4.1.7800.100.2.1.2.1.1	Integer32	not-accessible	Unique index for the fan being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning.
UBI ubiEnvMonFanState	1.3.6.1.4.1.7800.100.2.1.2.1.3	UbiEnvMonState	read-only	The current state of the fan being instrumented. Represents the fan state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly.
NTF ubiEnvMonFanStatusChange	1.3.6.1.4.1.7800.100.2.3.0.2			A ubiEnvMonFanStatusChangeNotif is sent if there is change in the state of a device being monitored by ubiEnvMonFanState.
ubiEnvMonFanTable	1.3.6.1.4.1.7800.100.2.1.2		not-accessible	The table of fan status maintained by the environmental monitor.
ubiEnvMonMIB	1.3.6.1.4.1.7800.100.2			The UBQS-ENVMON-MIB is used for getting the environment information of the system.
ubiEnvMonMIBCompliance	1.3.6.1.4.1.7800.100.2.4.1.1			The compliance statement for entities which implement the Ubiquoss Environmental Monitor MIB.
ubiEnvMonMIBCompliances	1.3.6.1.4.1.7800.100.2.4.1
ubiEnvMonMIBConformance	1.3.6.1.4.1.7800.100.2.4
ubiEnvMonMIBGroup	1.3.6.1.4.1.7800.100.2.4.2.1			A collection of objects providing environmental monitoring capability to a ubi chassis.
ubiEnvMonMIBGroups	1.3.6.1.4.1.7800.100.2.4.2
ubiEnvMonMIBNotifGroup	1.3.6.1.4.1.7800.100.2.4.2.2			A notification group providing notification for environmental monitoring.
ubiEnvMonMIBNotificationEnables	1.3.6.1.4.1.7800.100.2.2
ubiEnvMonMIBNotificationPrefix	1.3.6.1.4.1.7800.100.2.3
ubiEnvMonMIBNotifications	1.3.6.1.4.1.7800.100.2.3.0
ubiEnvMonObjects	1.3.6.1.4.1.7800.100.2.1
ubiEnvMonSupplyChannelEntry	1.3.6.1.4.1.7800.100.2.1.4.1		not-accessible	An entry in this table, representing the extended status of the associated DC power supply maintained by the environmental monitor card.
UBI ubiEnvMonSupplyChannelState	1.3.6.1.4.1.7800.100.2.1.4.1.2	UbiEnvMonState	read-only	The current state of the DC power supply channel being instrumented. Represents the power state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly.
NTF ubiEnvMonSupplyChannelStatusChange	1.3.6.1.4.1.7800.100.2.3.0.4			A ubiEnvMonSuppExtStatusChangeNotif is sent if there is change in the state of a device being monitored by ubiEnvMonSupplyExtChannelStatus.
ubiEnvMonSupplyChannelTable	1.3.6.1.4.1.7800.100.2.1.4		not-accessible	The table represents the extension status for DC power supply.
INT ubiEnvMonSupplyChannelType	1.3.6.1.4.1.7800.100.2.1.4.1.1	INTEGER	read-only	Unique index for the DC power supply channel.
STR ubiEnvMonSupplyDescr	1.3.6.1.4.1.7800.100.2.1.3.1.2	DisplayString	read-only	Textual description of the power supply being instrumented.
ubiEnvMonSupplyEntry	1.3.6.1.4.1.7800.100.2.1.3.1		not-accessible	An entry in the power supply status table, representing the status of the associated power supply maintained by the environmental monitor card.
I32 ubiEnvMonSupplyIndex	1.3.6.1.4.1.7800.100.2.1.3.1.1	Integer32	not-accessible	Unique index for the power supply being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning.
INT ubiEnvMonSupplySource	1.3.6.1.4.1.7800.100.2.1.3.1.4	INTEGER	read-only	The power supply source. ac - AC power supply dc - DC power supply
UBI ubiEnvMonSupplyState	1.3.6.1.4.1.7800.100.2.1.3.1.3	UbiEnvMonState	read-only	The current state of the power supply being instrumented. Represents the power state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly.
NTF ubiEnvMonSupplyStatusChange	1.3.6.1.4.1.7800.100.2.3.0.3			A ubiEnvMonSupplyStatChangeNotif is sent if there is change in the state of a device being monitored by ubiEnvMonSupplyState.
ubiEnvMonSupplyTable	1.3.6.1.4.1.7800.100.2.1.3		not-accessible	The table of power supply status maintained by the environmental monitor card.
STR ubiEnvMonTemperatureDescr	1.3.6.1.4.1.7800.100.2.1.1.1.2	DisplayString	read-only	Textual description of the testpoint being instrumented.
ubiEnvMonTemperatureEntry	1.3.6.1.4.1.7800.100.2.1.1.1		not-accessible	An entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor.
I32 ubiEnvMonTemperatureHighThreshold	1.3.6.1.4.1.7800.100.2.1.1.1.4	Integer32	read-write	A high threshold for the temperature. If a particular value isn't set, this object displays the default value.
I32 ubiEnvMonTemperatureIndex	1.3.6.1.4.1.7800.100.2.1.1.1.1	Integer32	not-accessible	Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning.
I32 ubiEnvMonTemperatureLowThreshold	1.3.6.1.4.1.7800.100.2.1.1.1.5	Integer32	read-write	A low threshold for the temperature. If a particular value isn't set, this object displays the default value.
UBI ubiEnvMonTemperatureState	1.3.6.1.4.1.7800.100.2.1.1.1.6	UbiEnvMonState	read-only	The current state of the testpoint being instrumented. Represents the temperature state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. warning(2): the environment is bad, such as temperature above normal operation range but not too high. critical(3): the environment is very bad, such as temperature much higher than normal operation limit. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist.
ubiEnvMonTemperatureTable	1.3.6.1.4.1.7800.100.2.1.1		not-accessible	The table of ambient temperature status maintained by the environmental monitor.
G32 ubiEnvMonTemperatureValueEx	1.3.6.1.4.1.7800.100.2.1.1.1.3	Gauge32	read-only	The current measurement of the testpoint being instrumented.
NTF ubiEnvMonTempStatusChange	1.3.6.1.4.1.7800.100.2.3.0.1			A ubiEnvMonTempStatusChangeNotif is sent if there is change in the state of a device being monitored by ubiEnvMonTemperatureState.

RFC description

Environmental monitoring for temperature, power, and system status on Ubiquoss devices.

Start monitoring Ubiquoss switches, Ubiquoss access/OLT network appliances (temperature/voltage/fan/power-supply status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBQS-ENVMON-MIB