UBQS-MULTICAST-MIB

All MIBs › UBQS-MULTICAST-MIB

Organization: Ubiquoss Corp.

Last Updated: 2011-05-30

Category: Ubiquoss Enterprise Networking

Description: Manages Ubiquoss multicast routing configuration, group membership, and multicast forwarding table.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBQS-MULTICAST-MIB?

UBQS-MULTICAST-MIB is a vendor-specific MIB from Ubiquoss, a maker of Ethernet access and aggregation switches, covering multicast protocol management on their devices. It exposes data on IGMP snooping cache entries, MVR (Multicast VLAN Registration) state, IGMP statistics, MLD snooping, and IGMP proxy routing configuration. In terms of hardware/software status monitoring, it is primarily useful for tracking the operational health of multicast forwarding software rather than physical hardware, letting an operator confirm that snooping entries are being created and aged correctly and that group membership tracking is functioning as expected. It likely builds on or coexists with standard IGMP/MLD and bridge MIB concepts even though it is defined independently as a proprietary module. This MIB is typically deployed on Ubiquoss access switches in service-provider or enterprise networks delivering IPTV or other multicast video services where verifying multicast replication and snooping behavior per VLAN is operationally important. Engineers can download the UBQS-MULTICAST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBQS-MULTICAST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss Ethernet access/aggregation switch

Monitoring Examples

An administrator would poll ubiIgmpSnoopCacheTable (via ubiIgmpSnoopCacheEntry rows keyed by ubiIgmpSnoopCacheVlanIndex, ubiIgmpSnoopCacheIfIndex, and ubiIgmpSnoopCacheAddress) to see which multicast groups are currently being snooped on which VLAN/interface. Fields like ubiIgmpSnoopCacheUpTime and ubiIgmpSnoopCacheExpireTime reveal how long a group membership has been active and when it will time out, while ubiIgmpSnoopCacheLastReporter identifies the last host that sent a join/report. An anomaly such as cache entries expiring repeatedly without renewal would indicate a host or IGMP querier problem on that VLAN.

What Can Be Monitored

IGMP snoop cache entries per VLAN
multicast group membership uptime
group membership expiration time
last IGMP reporter host
MVR status
IGMP/MLD snooping statistics

Imported Objects

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv6

From Q-BRIDGE-MIB

VlanIndex

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter
Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

From UBQS-SMI

ubiMgmtv2

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using ubiIgmpVlanStatsEntryCount OID:

Select an Ubiquoss Ethernet access/aggregation switch (IGMP/MLD snooping and MVR group-membership status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ubiIgmpVlanStatsEntryCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The current number of entries in the IGMP VLAN statistics table. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubiMulticastMIB	1.3.6.1.4.1.7800.100.21			This MIB module defines multicast information
ubiMulticastMIBNotificationPrefix	1.3.6.1.4.1.7800.100.21.0
NTF ubiIgmpSnoopVlanNotification	1.3.6.1.4.1.7800.100.21.0.1
ubiIgmpSnoopingMIBObjects	1.3.6.1.4.1.7800.100.21.1
ubiIgmpSnoopVlanConfigTable	1.3.6.1.4.1.7800.100.21.1.1		not-accessible	Table contains VLAN based configuration information for IGMP Snooping.
ubiIgmpSnoopVlanConfigEntry	1.3.6.1.4.1.7800.100.21.1.1.1		not-accessible	An entry is created for each active VLAN in the device and deleted when the VLAN becomes inactive.
VLA ubiIgmpSnoopVlanIndex	1.3.6.1.4.1.7800.100.21.1.1.1.1	VlanIndex	not-accessible	This object indicates the VLAN in which IGMP Snooping is configured.
T/F ubiIgmpSnoopVlanEnabled	1.3.6.1.4.1.7800.100.21.1.1.1.2	TruthValue	read-only	When this object is set to 'true' IGMP Snooping is enabled on this VLAN else disabled.
T/F ubiIgmpSnoopVlanFastLeaveEnabled	1.3.6.1.4.1.7800.100.21.1.1.1.3	TruthValue	read-write	This object specifies whether Fast-Leave mechanism (also known as Immediate-Leave) is to be performed by IGMP Snooping or not. When enabled, IGMP Snooping will remove the interface from the group mentioned in the IGMP Leave message received on that interface without waiting for the IGMP Group-Specific Query to timeout to determine whether there are any more hosts on that interface for that group.
T/F ubiIgmpSnoopVlanReportSuppressionEnabled	1.3.6.1.4.1.7800.100.21.1.1.1.4	TruthValue	read-write	When this object is set to 'true', IGMP Snooping will suppress duplicate IGMP Reports. When this object is set to 'false', all IGMP Reports are forwarded to all multicast routers in the VLAN.
IP ubiIgmpSnoopVlanForcedSourceIP	1.3.6.1.4.1.7800.100.21.1.1.1.5	IpAddress	read-write
ROW ubiIgmpSnoopVlanRowStatus	1.3.6.1.4.1.7800.100.21.1.1.1.6	RowStatus	read-create	create or remove IGMP-snooping vlan entry
T/F ubiIgmpSnoopVlanSnoopingQuerier	1.3.6.1.4.1.7800.100.21.1.1.1.7	TruthValue	read-write	When this object is set to 'true', IGMP snooping will send general query. When this object is set to 'false', IGMP snooping will not send general query.
T/F ubiIgmpSnoopVlanLastMemberQuery	1.3.6.1.4.1.7800.100.21.1.1.1.8	TruthValue	read-write	When this object is set to 'true', IGMP snooping will send group query only to last member. When this object is set to 'false', IGMP snooping will send group query to all members.
I32 ubiIgmpSnoopVlanVlantagCos	1.3.6.1.4.1.7800.100.21.1.1.1.9	Integer32	read-write	This object specifies whether VLAN tag COS in Ethernet Header of IGMP Messages is to be filled to the configured value or keeped by received IGMP Messages. When this object is set to , VLAN tag COS of forwarding or sending IGMP Messages will be filled to configured value. When this object is set to , VLAN tag COS of received IGMP Messages will be keeped and sended.
ubiIgmpSnoopMrouterTable	1.3.6.1.4.1.7800.100.21.1.2		not-accessible	Table contains VLAN based configuration information for IGMP Snooping.
ubiIgmpSnoopMrouterEntry	1.3.6.1.4.1.7800.100.21.1.2.1		not-accessible	An entry is created for each active VLAN in the device and deleted when the VLAN becomes inactive.
VLA ubiIgmpSnoopMrouterVlanIndex	1.3.6.1.4.1.7800.100.21.1.2.1.1	VlanIndex	not-accessible	This object indicates the VLAN in which IGMP Snooping is configured.
I32 ubiIgmpSnoopMrouterIfIndex	1.3.6.1.4.1.7800.100.21.1.2.1.2	Integer32	not-accessible	This object indicates interface index is configured.
VLA ubiIgmpSnoopMrouterSVlanID	1.3.6.1.4.1.7800.100.21.1.2.1.3	VlanIndex	read-write	This object indicates the VLAN in which IGMP Snooping is configured.
ROW ubiIgmpSnoopMrouterRowStatus	1.3.6.1.4.1.7800.100.21.1.2.1.4	RowStatus	read-create	create or remove IGMP-snooping vlan entry
ubiIgmpSnoopStaticGroupTable	1.3.6.1.4.1.7800.100.21.1.3		not-accessible	Table contains VLAN based configuration information for IGMP Snooping.
ubiIgmpSnoopStaticGroupEntry	1.3.6.1.4.1.7800.100.21.1.3.1		not-accessible	An entry is created for each active VLAN in the device and deleted when the VLAN becomes inactive.
VLA ubiIgmpSnoopStaticGroupVlanIndex	1.3.6.1.4.1.7800.100.21.1.3.1.1	VlanIndex	not-accessible	This object indicates the VLAN in which IGMP Snooping is configured.
I32 ubiIgmpSnoopStaticGroupIfIndex	1.3.6.1.4.1.7800.100.21.1.3.1.2	Integer32	not-accessible	This object indicates port's index is configured.
IP ubiIgmpSnoopStaticGroupAddress	1.3.6.1.4.1.7800.100.21.1.3.1.3	IpAddress	read-only	This object indicates the VLAN in which IGMP Snooping is configured.
ROW ubiIgmpSnoopStaticGroupRowStatus	1.3.6.1.4.1.7800.100.21.1.3.1.4	RowStatus	read-create	create or remove IGMP-snooping vlan entry
ubiIgmpSnoopPortConfigAclTable	1.3.6.1.4.1.7800.100.21.1.4		not-accessible	Table contains VLAN based configuration information for IGMP Snooping.
ubiIgmpSnoopPortConfigAclEntry	1.3.6.1.4.1.7800.100.21.1.4.1		not-accessible	An entry is created for each active VLAN in the device and deleted when the VLAN becomes inactive.
I32 ubiIgmpSnoopPortConfigAclIfIndex	1.3.6.1.4.1.7800.100.21.1.4.1.1	Integer32	not-accessible	This object indicates the VLAN in which IGMP Snooping is configured.
VLA ubiIgmpSnoopPortConfigAclVlanID	1.3.6.1.4.1.7800.100.21.1.4.1.2	VlanIndex	not-accessible	This object indicates the VLAN in which IGMP Snooping is configured.
STR ubiIgmpSnoopPortConfigAclName	1.3.6.1.4.1.7800.100.21.1.4.1.3	DisplayString	read-write	This object indicates port's index is configured.
ROW ubiIgmpSnoopPortConfigAclRowStatus	1.3.6.1.4.1.7800.100.21.1.4.1.4	RowStatus	read-create	create or remove IGMP-snooping vlan entry
ubiIgmpSnoopReporterTable	1.3.6.1.4.1.7800.100.21.1.5		not-accessible
ubiIgmpSnoopReporterEntry	1.3.6.1.4.1.7800.100.21.1.5.1		not-accessible
I32 ubiIgmpSnoopReporterIfIndex	1.3.6.1.4.1.7800.100.21.1.5.1.1	Integer32	not-accessible
IP ubiIgmpSnoopReporterGroupAddress	1.3.6.1.4.1.7800.100.21.1.5.1.2	IpAddress	not-accessible
IP ubiIgmpSnoopReporterAddress	1.3.6.1.4.1.7800.100.21.1.5.1.3	IpAddress	not-accessible
TIK ubiIgmpSnoopReporterUptime	1.3.6.1.4.1.7800.100.21.1.5.1.4	TimeTicks	read-only
TIK ubiIgmpSnoopReporterExpireTime	1.3.6.1.4.1.7800.100.21.1.5.1.5	TimeTicks	read-only
ubiIgmpSnoopCacheTable	1.3.6.1.4.1.7800.100.21.1.6		not-accessible	The (conceptual) table listing the IP multicast groups for which the host is a member on a particular interface.
ubiIgmpSnoopCacheEntry	1.3.6.1.4.1.7800.100.21.1.6.1		not-accessible	An entry (conceptual row) in the ubiIgmpSnoopCacheTable.
NUM ubiIgmpSnoopCacheVlanIndex	1.3.6.1.4.1.7800.100.21.1.6.1.1	InterfaceIndex	not-accessible	The vlan interface for which this entry contains information for an IP multicast group address.
NUM ubiIgmpSnoopCacheIfIndex	1.3.6.1.4.1.7800.100.21.1.6.1.2	InterfaceIndex	not-accessible	The interface for which this entry contains information for an IP multicast group address.
IP ubiIgmpSnoopCacheAddress	1.3.6.1.4.1.7800.100.21.1.6.1.3	InetAddress	not-accessible	The IP multicast group address for which this entry contains information. The InetAddressType, e.g., IPv4 or IPv6, is identified by the ubiIgmpSnoopCacheAddressType variable in the ubiIgmpSnoopCache table.
TIK ubiIgmpSnoopCacheUpTime	1.3.6.1.4.1.7800.100.21.1.6.1.4	TimeTicks	read-only	The time elapsed since this entry was created.
TIK ubiIgmpSnoopCacheExpireTime	1.3.6.1.4.1.7800.100.21.1.6.1.5	TimeTicks	read-only
IP ubiIgmpSnoopCacheLastReporter	1.3.6.1.4.1.7800.100.21.1.6.1.6	InetAddress	read-only	The IP address of the source of the last membership report received for this IP multicast group address on this interface. If no membership report has been received, this object has a value of 0. The InetAddressType, e.g., IPv4 or IPv6, is identified by the ubiIgmpSnoopCacheAddressType variable in the ubiIgmpSnoopCache table.
ubiMvrMIBObjects	1.3.6.1.4.1.7800.100.21.2
INT ubiMvrGlobalConfigEnable	1.3.6.1.4.1.7800.100.21.2.1	INTEGER	read-write	The enabled status of MVR function on this system. This table is used to activate entries in the ubiMvrPortConfigTable.
ubiMvrPortConfigTable	1.3.6.1.4.1.7800.100.21.2.2		not-accessible	Table contains PORT based configuration information for MVR.
ubiMvrPortConfigEntry	1.3.6.1.4.1.7800.100.21.2.2.1		not-accessible	A logical row in the ubiMvrPortConfigTable.
I32 ubiMvrPortConfigVlanid	1.3.6.1.4.1.7800.100.21.2.2.1.1	Integer32	read-only	This object indicates vlan ID is configured.
IP ubiMvrPortConfigGroupaddress	1.3.6.1.4.1.7800.100.21.2.2.1.2	IpAddress	read-only	This object indicates multicast group address is configured.
I32 ubiMvrPortConfigGroupCount	1.3.6.1.4.1.7800.100.21.2.2.1.3	Integer32	read-only	This object indicates multicast group count is configured.
ROW ubiMvrPortConfigRowStatus	1.3.6.1.4.1.7800.100.21.2.2.1.4	RowStatus	read-create	create or remove entries in the ubiMvrPortConfigEntry.
ubiIgmpStatsMIBObjects	1.3.6.1.4.1.7800.100.21.3
INT ubiIgmpClearStatistics	1.3.6.1.4.1.7800.100.21.3.1	INTEGER	read-write
ubiIgmpVlanStatsTable	1.3.6.1.4.1.7800.100.21.3.2		not-accessible
ubiIgmpVlanStatsEntry	1.3.6.1.4.1.7800.100.21.3.2.1		not-accessible
C64 ubiIgmpVlanStatsEntryCountEx	1.3.6.1.4.1.7800.100.21.3.2.1.1	Counter64	read-only
C64 ubiIgmpVlanStatsReportTxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.2	Counter64	read-only
C64 ubiIgmpVlanStatsReportRxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.3	Counter64	read-only
C64 ubiIgmpVlanStatsReportRxSuccess	1.3.6.1.4.1.7800.100.21.3.2.1.4	Counter64	read-only
C64 ubiIgmpVlanStatsReportRxUnsuccess	1.3.6.1.4.1.7800.100.21.3.2.1.5	Counter64	read-only
C64 ubiIgmpVlanStatsLeaveTxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.6	Counter64	read-only
C64 ubiIgmpVlanStatsLeaveRxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.7	Counter64	read-only
C64 ubiIgmpVlanStatsGeneralQueryTxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.8	Counter64	read-only
C64 ubiIgmpVlanStatsGeneralQueryRxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.9	Counter64	read-only
C64 ubiIgmpVlanStatsGroupSpecificQueryTxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.10	Counter64	read-only
C64 ubiIgmpVlanStatsGroupSpecificQueryRxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.11	Counter64	read-only
C64 ubiIgmpVlanStatsInvalidMessageRxTotal	1.3.6.1.4.1.7800.100.21.3.2.1.12	Counter64	read-only
ubiIgmpSnoopMembershipCountTable	1.3.6.1.4.1.7800.100.21.3.3		not-accessible
ubiIgmpSnoopMembershipCountEntry	1.3.6.1.4.1.7800.100.21.3.3.1		not-accessible
C64 ubiIgmpSnoopMembershipCount	1.3.6.1.4.1.7800.100.21.3.3.1.1	Counter64	read-only
ubiMldSnoopingMIBObjects	1.3.6.1.4.1.7800.100.21.4
ubiIgmpProxyRoutingMIBObjects	1.3.6.1.4.1.7800.100.21.5
ubiIgmpProxyRoutingIfMRouteCountTable	1.3.6.1.4.1.7800.100.21.5.1		not-accessible	Multicast mroute count table for interface (IGMPRT)
ubiIgmpProxyRoutingIfMRouteCountEntry	1.3.6.1.4.1.7800.100.21.5.1.1		not-accessible	Multicast mroute count entry for interface (IGMPRT)
OCT ubiIgmpProxyRoutingIfMRouteCountInterface	1.3.6.1.4.1.7800.100.21.5.1.1.1	OCTET STRING	read-only	Interface name for interface (IGMPRT)
CTR ubiIgmpProxyRoutingOutIfMRouteCount	1.3.6.1.4.1.7800.100.21.5.1.1.2	Counter	read-only	Multicast mroute count for interface (IGMPRT)
ubiIgmpProxyRoutingOutIfMRouteTable	1.3.6.1.4.1.7800.100.21.5.2		not-accessible	Multicast mroute table for interface (IGMPRT)
ubiIgmpProxyRoutingOutIfMRouteEntry	1.3.6.1.4.1.7800.100.21.5.2.1		not-accessible	Multicast mroute entry for interface (IGMPRT)
OCT ubiIgmpProxyRoutingOutIfMRouteInterface	1.3.6.1.4.1.7800.100.21.5.2.1.1	OCTET STRING	read-only	Interface name of mroute entry for interface (IGMPRT)
IP ubiIgmpProxyRoutingOutIfMRouteGroup	1.3.6.1.4.1.7800.100.21.5.2.1.2	IpAddress	read-only	Group IP address of mroute entry for interface (IGMPRT)
IP ubiIgmpProxyRoutingOutIfMRouteSource	1.3.6.1.4.1.7800.100.21.5.2.1.3	IpAddress	read-only	Source IP address of mroute entry for interface (IGMPRT)
ubiMulticastMIBConformance	1.3.6.1.4.1.7800.100.21.10
ubiMulticastMIBCompliances	1.3.6.1.4.1.7800.100.21.10.1
ubiMulticastMIBCompliance	1.3.6.1.4.1.7800.100.21.10.1.1			The compliance statement for entities which implement the Ubiquoss Multicast MIB.
ubiMulticastMIBGroups	1.3.6.1.4.1.7800.100.21.10.2
ubiIgmpSnoopConfigGroup	1.3.6.1.4.1.7800.100.21.10.2.1			The collection of objects which are used to configure the mp snooping.
ubiIgmpSnoopInfoGroup	1.3.6.1.4.1.7800.100.21.10.2.2			The collection of objects which are used to manager the information related to igmp snooping.

RFC description

Ubiquoss multicast MIB defining IGMP snooping, MVR, IGMP proxy, and MLD snooping information.

Start monitoring Ubiquoss Ethernet access/aggregation switch (IGMP/MLD snooping and MVR group-membership status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBQS-MULTICAST-MIB