UNCDZ-MIB

All MIBs › UNCDZ-MIB

Organization: CAREL SpA

Last Updated: 2004-08-12

Category: Building Automation and Environmental

Description: Manages CAREL SpA UNCDZ controller for HVAC and refrigeration system monitoring and control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UNCDZ-MIB?

UNCDZ-MIB is a CAREL SpA proprietary MIB (enterprise OID 9839) for the Uniflair UNCDZ precision cooling unit (a data-center CRAC/CRAH-style device, given the pCO controller reference common to CAREL HVAC controllers). Its objects cover agent release/code, primary controller (pCOId1) status and error count, ventilation-on and up to four compressor-stage states, heater-stage outputs, hot-gas and dehumidification states, power status, and a broad set of malfunction flags — access, air-temperature-sensor (ATA/AUA), water-temperature-sensor (BTA/BUA), EAP, filter, flood, flow, and heater faults. As a hardware-status MIB it lets a facilities team confirm compressor-stage operation and quickly identify which specific subsystem (filter, flood sensor, heater, etc.) has raised a fault on a precision cooling unit. It is deployed on the CAREL Uniflair UNCDZ precision cooling unit. Engineers can download the UNCDZ-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UNCDZ-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

CAREL Uniflair UNCDZ precision cooling unit

Monitoring Examples

A facilities team checks mal-flood and mal-filter to quickly identify which specific subsystem triggered a fault alarm on a Uniflair UNCDZ precision cooling unit in the data center.

What Can Be Monitored

compressor/heater stage status
subsystem fault flags

Imported Objects

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-MIB

sysContact	OBJECT-TYPE
sysLocation	OBJECT-TYPE
sysName	OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 ab_mediath	1.3.6.1.4.1.9839.2.1.1.65	Integer32	read-write	Usage of T+ H Values: Local (0) / Mean (1)
I32 agentCode	1.3.6.1.4.1.9839.1.2	Integer32	read-only	Code of the Agent. 2=pCOWeb.
I32 agentRelease	1.3.6.1.4.1.9839.1.1	Integer32	read-only	Release of the Agent.
I32 alarm_delay	1.3.6.1.4.1.9839.2.1.3.23	Integer32	read-write	Room T+H Alarm Delay
analogObjects	1.3.6.1.4.1.9839.2.1.2
I32 anaout2	1.3.6.1.4.1.9839.2.1.2.21	Integer32	read-only	0-10V Ramp 2 Value (HW Valve/Rad Cooler Ramp)
carel	1.3.6.1.4.1.9839
I32 ciclo_sm	1.3.6.1.4.1.9839.2.1.3.28	Integer32	read-write	Set Back Mode: Fan Cyclical Start Interval
I32 compressore1	1.3.6.1.4.1.9839.2.1.1.2	Integer32	read-only	Compressor 1
I32 compressore2	1.3.6.1.4.1.9839.2.1.1.3	Integer32	read-only	Compressor 2
I32 compressore3	1.3.6.1.4.1.9839.2.1.1.4	Integer32	read-only	Compressor 3
I32 compressore4	1.3.6.1.4.1.9839.2.1.1.5	Integer32	read-only	Compressor 4
I32 delta_lm	1.3.6.1.4.1.9839.2.1.2.24	Integer32	read-write	T+H Values: Mean/Local Diff. (aut. Changeover)
digitalObjects	1.3.6.1.4.1.9839.2.1.1
I32 emerg	1.3.6.1.4.1.9839.2.1.1.67	Integer32	read-only	Unit in Emergency operation
I32 exc_time	1.3.6.1.4.1.9839.2.1.3.24	Integer32	read-write	Anti-Hunting Constant of Room Regulation
I32 gas_caldo_on	1.3.6.1.4.1.9839.2.1.1.9	Integer32	read-only	Hot Gas Coil
I32 glb_al	1.3.6.1.4.1.9839.2.1.1.51	Integer32	read-only	General Alarm
I32 hdiff	1.3.6.1.4.1.9839.2.1.3.12	Integer32	read-write	Dehumidification Proportional Band
I32 hh_set	1.3.6.1.4.1.9839.2.1.3.14	Integer32	read-write	High Relative Humidity Alarm Threshold
I32 hset	1.3.6.1.4.1.9839.2.1.3.16	Integer32	read-write	Dehumidification Set Point
I32 hset_sm	1.3.6.1.4.1.9839.2.1.3.17	Integer32	read-write	Setback Mode: Dehumidification Set Point
I32 ht_set	1.3.6.1.4.1.9839.2.1.2.11	Integer32	read-write	Room High Temp. Alarm Threshold
I32 htset_cw	1.3.6.1.4.1.9839.2.1.2.16	Integer32	read-write	CW High Temperature Alarm Threshold
I32 hu_diff	1.3.6.1.4.1.9839.2.1.3.13	Integer32	read-write	Humidification Proportional Band
I32 hu_set	1.3.6.1.4.1.9839.2.1.3.18	Integer32	read-write	Humidification Set Point
I32 hu_set_sm	1.3.6.1.4.1.9839.2.1.3.19	Integer32	read-write	Setback Mode: Humidification Set Point
instruments	1.3.6.1.4.1.9839.2
integerObjects	1.3.6.1.4.1.9839.2.1.3
I32 k_syson	1.3.6.1.4.1.9839.2.1.1.60	Integer32	read-write	Unit Remote Switch-On/Off Control
I32 lan_unit	1.3.6.1.4.1.9839.2.1.3.27	Integer32	read-write	Total of units connected in LAN
I32 lh_set	1.3.6.1.4.1.9839.2.1.3.15	Integer32	read-write	Low Relative Humidity Alarm Threshold
I32 lt_set	1.3.6.1.4.1.9839.2.1.2.12	Integer32	read-write	Room Low Temp. Alarm Threshold
I32 mal_access	1.3.6.1.4.1.9839.2.1.1.12	Integer32	read-only	Tampering Alarm
I32 mal_ata	1.3.6.1.4.1.9839.2.1.1.13	Integer32	read-only	Alarm: Room High Temperature
I32 mal_aua	1.3.6.1.4.1.9839.2.1.1.15	Integer32	read-only	Alarm: Room High Humidity
I32 mal_bta	1.3.6.1.4.1.9839.2.1.1.14	Integer32	read-only	Alarm: Room Low Temperature
I32 mal_bua	1.3.6.1.4.1.9839.2.1.1.16	Integer32	read-only	Alarm: Room Low Humidity
I32 mal_cw_dh	1.3.6.1.4.1.9839.2.1.1.32	Integer32	read-only	Alarm: Chilled Water Temp. too High for Dehumidification
I32 mal_eap	1.3.6.1.4.1.9839.2.1.1.17	Integer32	read-only	Alarm: Room High/Low Temp./Humid.(Ext. Devices)
I32 mal_filter	1.3.6.1.4.1.9839.2.1.1.18	Integer32	read-only	Alarm: Clogged Filter
I32 mal_flood	1.3.6.1.4.1.9839.2.1.1.19	Integer32	read-only	Alarm: Water Leakage Detected
I32 mal_flux	1.3.6.1.4.1.9839.2.1.1.20	Integer32	read-only	Alarm: Loss of Air Flow
I32 mal_hcurr	1.3.6.1.4.1.9839.2.1.1.29	Integer32	read-only	Humidifier Alarm: High Current
I32 mal_heater	1.3.6.1.4.1.9839.2.1.1.21	Integer32	read-only	Alarm: Heater Overheating
I32 mal_hp1	1.3.6.1.4.1.9839.2.1.1.22	Integer32	read-only	Alarm: High Pressure 1
I32 mal_hp2	1.3.6.1.4.1.9839.2.1.1.23	Integer32	read-only	Alarm: High Pressure 2
I32 mal_lan	1.3.6.1.4.1.9839.2.1.1.28	Integer32	read-only	Alarm: Interrupted LAN
I32 mal_lp1	1.3.6.1.4.1.9839.2.1.1.24	Integer32	read-only	Alarm: Low Pressure 1
I32 mal_lp2	1.3.6.1.4.1.9839.2.1.1.25	Integer32	read-only	Alarm: Low Pressure 2
I32 mal_nopower	1.3.6.1.4.1.9839.2.1.1.30	Integer32	read-only	Humidifier Alarm: Power Loss
I32 mal_nowater	1.3.6.1.4.1.9839.2.1.1.31	Integer32	read-only	Humidifier Alarm: Water Loss
I32 mal_ore_compr1	1.3.6.1.4.1.9839.2.1.1.42	Integer32	read-only	Service Alarm: Compressor 1 hour counter threshold
I32 mal_ore_compr2	1.3.6.1.4.1.9839.2.1.1.43	Integer32	read-only	Service Alarm: Compressor 2 hour counter threshold
I32 mal_ore_compr3	1.3.6.1.4.1.9839.2.1.1.44	Integer32	read-only	Service Alarm: Compressor 3 hour counter threshold
I32 mal_ore_compr4	1.3.6.1.4.1.9839.2.1.1.45	Integer32	read-only	Service Alarm: Compressor 4 hour counter threshold
I32 mal_ore_filtro	1.3.6.1.4.1.9839.2.1.1.46	Integer32	read-only	Service Alarm: Air Filter hour counter threshold
I32 mal_ore_risc1	1.3.6.1.4.1.9839.2.1.1.47	Integer32	read-only	Service Alarm: Heater 1 hour counter threshold
I32 mal_ore_risc2	1.3.6.1.4.1.9839.2.1.1.48	Integer32	read-only	Service Alarm: Heater 2 hour counter threshold
I32 mal_ore_umid	1.3.6.1.4.1.9839.2.1.1.49	Integer32	read-only	Service Alarm: Humidifier hour counter threshold
I32 mal_ore_unit	1.3.6.1.4.1.9839.2.1.1.50	Integer32	read-only	Service Alarm: Unit hour counter threshold
I32 mal_phase	1.3.6.1.4.1.9839.2.1.1.26	Integer32	read-only	Alarm: Wrong phase sequence
I32 mal_smoke	1.3.6.1.4.1.9839.2.1.1.27	Integer32	read-only	Alarm: SMOKE-FIRE DETECTED
I32 mal_sonda_ta	1.3.6.1.4.1.9839.2.1.1.36	Integer32	read-only	Alarm: Room air Sensor Failure/Disconnected
I32 mal_sonda_tac	1.3.6.1.4.1.9839.2.1.1.37	Integer32	read-only	Alarm: Hot water Sensor Failure/Disconnected
I32 mal_sonda_tc	1.3.6.1.4.1.9839.2.1.1.38	Integer32	read-only	Alarm: Condensing water Sensor Failure/Disconnect.
I32 mal_sonda_te	1.3.6.1.4.1.9839.2.1.1.39	Integer32	read-only	Alarm: Outdoor temp. Sensor Failure/Disconnected
I32 mal_sonda_tm	1.3.6.1.4.1.9839.2.1.1.40	Integer32	read-only	Alarm: Delivery temp. Sensor Failure/Disconnected
I32 mal_sonda_ua	1.3.6.1.4.1.9839.2.1.1.41	Integer32	read-only	Alarm: Rel. Humidity Sensor Failure/Disconnected
I32 mal_tc_cw	1.3.6.1.4.1.9839.2.1.1.33	Integer32	read-only	Alarm: CW Valve Failure or Water Flow too Low
I32 mal_wflow	1.3.6.1.4.1.9839.2.1.1.34	Integer32	read-only	Alarm: Loss of Water flow
I32 mal_wht	1.3.6.1.4.1.9839.2.1.1.35	Integer32	read-only	Alarm: High chilled water temp.
I32 on_deum	1.3.6.1.4.1.9839.2.1.1.10	Integer32	read-only	Dehumidification
I32 or_al_2lev	1.3.6.1.4.1.9839.2.1.1.52	Integer32	read-only	2nd Level Alarm
I32 ore_compr1	1.3.6.1.4.1.9839.2.1.3.3	Integer32	read-only	Compressor 1 Working Houres
I32 ore_compr2	1.3.6.1.4.1.9839.2.1.3.4	Integer32	read-only	Compressor 2 Working Houres
I32 ore_compr3	1.3.6.1.4.1.9839.2.1.3.5	Integer32	read-only	Compressor 3 Working Houres
I32 ore_compr4	1.3.6.1.4.1.9839.2.1.3.6	Integer32	read-only	Compressor 4 Working Houres
I32 ore_filtro	1.3.6.1.4.1.9839.2.1.3.1	Integer32	read-only	Air Filter Working Houres
I32 ore_heat1	1.3.6.1.4.1.9839.2.1.3.7	Integer32	read-only	Heater 1 Working Houres
I32 ore_heat2	1.3.6.1.4.1.9839.2.1.3.8	Integer32	read-only	Heater 2 Working Houres
I32 ore_umid	1.3.6.1.4.1.9839.2.1.3.9	Integer32	read-only	Humidifier Working Houres
I32 ore_unit	1.3.6.1.4.1.9839.2.1.3.2	Integer32	read-only	Unit Working Houres
I32 out_h1	1.3.6.1.4.1.9839.2.1.1.6	Integer32	read-only	Heating 1
I32 out_h2	1.3.6.1.4.1.9839.2.1.1.7	Integer32	read-only	Heating 2
I32 out_h3	1.3.6.1.4.1.9839.2.1.1.8	Integer32	read-only	Heating 3
pCOErrorsNumbergroup	1.3.6.1.4.1.9839.2.0.11
I32 pCOId1_ErrorsNumber	1.3.6.1.4.1.9839.2.0.11.1	Integer32	read-only	Number of Communication Errors from pCOId1 to pCOWeb.
I32 pCOId1_Status	1.3.6.1.4.1.9839.2.0.10.1	Integer32	read-only	Status of pCOId1. 0=Offline, 1=Init, 2=Online
pCOStatusgroup	1.3.6.1.4.1.9839.2.0.10
pCOWebInfo	1.3.6.1.4.1.9839.2.0
I32 power	1.3.6.1.4.1.9839.2.1.1.11	Integer32	read-only	Humidification
I32 rampa_valv	1.3.6.1.4.1.9839.2.1.2.20	Integer32	read-only	0-10V Ramp 1 Value (CW Valve Ramp)
I32 range_t_ac	1.3.6.1.4.1.9839.2.1.1.56	Integer32	read-only	Hot water temp. Sensor Fitted
I32 range_t_circ	1.3.6.1.4.1.9839.2.1.1.54	Integer32	read-only	Closed Circuit (or Chilled) Water Temperature Sensor Fitted
I32 range_t_ext	1.3.6.1.4.1.9839.2.1.1.53	Integer32	read-only	Outdoor Temp. Sensor Fitted
I32 range_t_man	1.3.6.1.4.1.9839.2.1.1.55	Integer32	read-only	Delivery Temp. Sensor Fitted
I32 range_u_amb	1.3.6.1.4.1.9839.2.1.1.58	Integer32	read-only	Relative Humidity Sensor Fitted
I32 regul_delay	1.3.6.1.4.1.9839.2.1.3.21	Integer32	read-write	Regulation Start Transitory
I32 restart_delay	1.3.6.1.4.1.9839.2.1.3.20	Integer32	read-write	Restart Delay
I32 sleep_mode	1.3.6.1.4.1.9839.2.1.1.63	Integer32	read-write	Set Back Mode (Sleep Mode)
I32 steam_production	1.3.6.1.4.1.9839.2.1.2.22	Integer32	read-only	Humidifier: steam capacity
systm	1.3.6.1.4.1.9839.1
I32 t_cw_dh	1.3.6.1.4.1.9839.2.1.2.15	Integer32	read-write	CW Set Point to Start Dehumidification Cycle
I32 t_diff	1.3.6.1.4.1.9839.2.1.2.8	Integer32	read-write	Cooling Prop.Band
I32 t_diff_c	1.3.6.1.4.1.9839.2.1.2.10	Integer32	read-write	Heating Prop.Band
I32 t_rc_es	1.3.6.1.4.1.9839.2.1.2.18	Integer32	read-write	Rad-cooler Set Point in E.S. Mode (ES Only)
I32 t_rc_est	1.3.6.1.4.1.9839.2.1.2.19	Integer32	read-write	Rad-cooler Set Point in DX Mode (ES Only)
I32 t_set	1.3.6.1.4.1.9839.2.1.2.7	Integer32	read-write	Cooling Set Point
I32 t_set_c	1.3.6.1.4.1.9839.2.1.2.9	Integer32	read-write	Heating Set point
I32 t_set_c_sm	1.3.6.1.4.1.9839.2.1.2.14	Integer32	read-write	Setback Mode: Heating Set Point
I32 t_set_cw	1.3.6.1.4.1.9839.2.1.2.17	Integer32	read-write	CW Set Point to Start CW Operating Mode (TC only)
I32 t_set_lm	1.3.6.1.4.1.9839.2.1.2.23	Integer32	read-write	Delivery Air Temperature Limit Set Point
I32 t_set_sm	1.3.6.1.4.1.9839.2.1.2.13	Integer32	read-write	Setback Mode: Cooling Set Point
I32 t_std_by	1.3.6.1.4.1.9839.2.1.3.25	Integer32	read-write	Stand-by Cycle Base Time
I32 temp_ac	1.3.6.1.4.1.9839.2.1.2.5	Integer32	read-only	Hot Water Temperature
I32 temp_amb	1.3.6.1.4.1.9839.2.1.2.1	Integer32	read-only	Room Temperature
I32 temp_circ	1.3.6.1.4.1.9839.2.1.2.4	Integer32	read-only	Closed Circuit (or Chilled) Water Temperature
I32 temp_ext	1.3.6.1.4.1.9839.2.1.2.2	Integer32	read-only	Outdoor Temperature
I32 temp_mand	1.3.6.1.4.1.9839.2.1.2.3	Integer32	read-only	Delivery Air Temperature
I32 test_sm	1.3.6.1.4.1.9839.2.1.1.64	Integer32	read-write	Set Back mode: Cyclical Start of Fan
I32 time_lowp	1.3.6.1.4.1.9839.2.1.3.22	Integer32	read-write	Low Pressure Delay
I32 umid_al	1.3.6.1.4.1.9839.2.1.1.57	Integer32	read-only	Humidifier general alarm
I32 umid_amb	1.3.6.1.4.1.9839.2.1.2.6	Integer32	read-only	Room Relative Humidity
uncdz_MIB	1.3.6.1.4.1.9839.2.1			This is the MIB module for the UNIFLAIR UNCDZ device.
I32 ustdby1_2	1.3.6.1.4.1.9839.2.1.1.66	Integer32	read-write	No. Of Stand-by Units: one (0) / two (1)
I32 vent_on	1.3.6.1.4.1.9839.2.1.1.1	Integer32	read-only	System On (Fan)
I32 xs_res_al	1.3.6.1.4.1.9839.2.1.1.61	Integer32	read-write	Buzzer and Alarm Remote Reset Control

RFC description

CAREL UNIFLAIR UNCDZ device MIB for monitoring climate control and environmental parameters in data centers.

Start monitoring CAREL Uniflair UNCDZ precision cooling unit (compressor-stage/malfunction-flag status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UNCDZ-MIB

What Is UNCDZ-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description