All MIBs › UBQS-ENVMON-MIB › ubiEnvMonTemperatureState
ubiEnvMonTemperatureState
Module: UBQS-ENVMON-MIB
OID (symbolic): UBQS-ENVMON-MIB::ubiEnvMonTemperatureState
OID (numeric): 1.3.6.1.4.1.7800.100.2.1.1.1.6
Node type: OBJECT-TYPE
Type: UbiEnvMonState
Access: read-only
Description: The current state of the testpoint being instrumented. Represents the temperature state of a device being monitored. Valid values are:
normal(1): the environment is good, such as low temperature.
warning(2): the environment is bad, such as temperature above normal operation range but not too high.
critical(3): the environment is very bad, such as temperature much higher than normal operation limit.
notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist.
What is ubiEnvMonTemperatureState?
This field reports the overall health state of the temperature testpoint: normal, warning, critical, or not present. Admins use this simplified state, rather than the raw reading, for quick at-a-glance monitoring and alerting thresholds. For example, a value of critical(3) indicates the temperature is much higher than the normal operating limit and needs immediate attention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.2.1.1.1.6 snmpwalk -v2c -c public <target> UBQS-ENVMON-MIB::ubiEnvMonTemperatureState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.2.1.1.1.6.1 snmpget -v2c -c public <target> UBQS-ENVMON-MIB::ubiEnvMonTemperatureState.1
Start monitoring Ubiquoss switches, Ubiquoss access/OLT network appliances (temperature/voltage/fan/power-supply status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-ENVMON-MIB::ubiEnvMonTemperatureState OID value, configure state conditions and alerts, and monitor any Ubiquoss switches, Ubiquoss access/OLT network appliances (temperature/voltage/fan/power-supply status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.2 | ubiEnvMonMIB | UBQS-ENVMON-MIB |
| 1.3.6.1.4.1.7800.100.2.1 | ubiEnvMonObjects | UBQS-ENVMON-MIB |
| 1.3.6.1.4.1.7800.100.2.1.1 | ubiEnvMonTemperatureTable | UBQS-ENVMON-MIB |
| 1.3.6.1.4.1.7800.100.2.1.1.1 | ubiEnvMonTemperatureEntry | UBQS-ENVMON-MIB |
| 1.3.6.1.4.1.7800.100.2.1.1.1.6 | ubiEnvMonTemperatureState | UBQS-ENVMON-MIB |