TROPIC-WAVEKEY-MIB

All MIBs › TROPIC-WAVEKEY-MIB

Organization: Nokia

Last Updated: 2016-02-10

Category: Nokia Optical Transport

Description: Manages Nokia Tropic wavelength key and optical channel security provisioning for DWDM transport.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-WAVEKEY-MIB?

TROPIC-WAVEKEY-MIB is part of Nokia's Tropic optical transport product family, managing wavelength-key and optical-channel security provisioning for wavelength-division-multiplexed transport links. It belongs to the optical networking/DWDM transport technology area. Its data centers on configuration objects — wavelength key assignment and channel security provisioning — rather than general system health metrics. Though primarily a security/key-provisioning module, TROPIC-WAVEKEY-MIB SNMP monitoring in an optical transport context is also useful for checking whether an optical channel's security association or key state is healthy versus faulted, complementing hardware/software status exposed by companion Tropic MIBs such as entity and notification modules. It is designed to work alongside other Tropic-branded MIBs that share the same OID tree and reporting model. It is deployed in service-provider optical transport networks running Nokia Tropic DWDM/optical transponder equipment.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-WAVEKEY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia Tropic optical transport/DWDM equipment

Monitoring Examples

No sample objects were provided for TROPIC-WAVEKEY-MIB, so a concrete polling scenario cannot be grounded in verified object names; based on the module description alone, an operator would likely check wavelength-key/channel security provisioning state to confirm an optical channel's encryption association has not dropped, but this is inferred rather than object-verified.

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TimeStamp
TruthValue

From TROPIC-GLOBAL-REG

tnCardModules	OBJECT-IDENTITY
tnWaveKeyMIB	OBJECT-IDENTITY

From TROPIC-SHELF-MIB

tnShelfIndex

OBJECT-TYPE

From TROPIC-SLOT-MIB

tnSlotIndex

OBJECT-TYPE

From TROPIC-TC

AluWdmDisabledEnabled
TnCommand
TnOchStatus

How to Use in IPNetwork Monitor

Example using tnWaveKeyDecodeCurrentUpstreamLossOut OID:

Select a Nokia Tropic optical transport/DWDM system as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tnWaveKeyDecodeCurrentUpstreamLossOut into the Find box to locate it in the OID tree, then select it and click OK. It reports the most recently calculated point-to-point optical loss on the upstream output, in milli-dB. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the loss exceeds the value expected for a healthy link (e.g. beyond -3000, i.e. -3 dB, depending on your link budget), since rising optical loss often precedes a fiber or connector problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 tnChannel	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.2	Unsigned32	not-accessible	The ITU channel.
INT tnDirection	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.1	INTEGER	not-accessible	The signal direction.
tnDomainWaveKeyEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.20.1		not-accessible
tnDomainWaveKeyGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.20
U32 tnDomainWaveKeyOchKeysUsedPercent	1.3.6.1.4.1.7483.2.2.3.2.2.1.20.1.1	Unsigned32	read-only	Percentage of unique WT key combinations that have been utilized for a given Och frequency. Percentage greater than 100 indicates re-use of combinations. Only applicable where the WtDomainNumber applies.
T/F tnDomainWaveKeyOchUnlockedForDuplicates	1.3.6.1.4.1.7483.2.2.3.2.2.1.20.1.2	TruthValue	read-only	Indicates whether the OCH frequency is unlocked for use of duplicate Wave Keys. Only applicable where the WtDomainNumber applies.
tnDomainWaveKeyTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.20		not-accessible	.
U32 tnUnexpectedWtKey	1.3.6.1.4.1.7483.2.2.3.2.2.1.12.1.2	Unsigned32	read-only	One of many possible Wave Keys.
tnUnexpectedWtKeyEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.12.1		not-accessible
tnUnexpectedWtKeyGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.12
U32 tnUnexpectedWtKeyIndex	1.3.6.1.4.1.7483.2.2.3.2.2.1.12.1.1	Unsigned32	not-accessible	An arbitrary id given to each of the unexpected Wave Keys.
I32 tnUnexpectedWtKeyPower	1.3.6.1.4.1.7483.2.2.3.2.2.1.12.1.3	Integer32	read-only	The power, expressed in units of mBm, associated with the unexpected Wave Key.
tnUnexpectedWtKeyTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.12		not-accessible	This table provides a complete list of all unexpected received Wave Keys.
tnWaveKeyBasics	1.3.6.1.4.1.7483.2.2.3.2.2.1
tnWaveKeyCompliance	1.3.6.1.4.1.7483.2.2.3.2.1.2.1
tnWaveKeyCompliances	1.3.6.1.4.1.7483.2.2.3.2.1.2
tnWaveKeyConf	1.3.6.1.4.1.7483.2.2.3.2.1
I32 tnWaveKeyDecodeCurrentUpstreamLossIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.20	Integer32	read-only	Detect point to detect point loss in, calculated most recently. Current range: -9900 to 9900.
I32 tnWaveKeyDecodeCurrentUpstreamLossOutEx	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.21	Integer32	read-only	Detect point to detect point loss out, calculated most recently. Current range: -9900 to 9900.
tnWaveKeyDecodeEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1		not-accessible
tnWaveKeyDecodeGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.5
T/F tnWaveKeyDecodeInferredIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.16	TruthValue	read-only	Indicates whether or not the Detect point is inferred.
T/F tnWaveKeyDecodeInferredOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.17	TruthValue	read-only	Indicates whether or not the Detect point is inferred.
I32 tnWaveKeyDecodeMaxPlannedLossIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.8	Integer32	read-create	Current configurable range: -9900 to 5000.
I32 tnWaveKeyDecodeMaxPlannedLossOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.9	Integer32	read-create	Current configurable range: -9900 to 5000.
I32 tnWaveKeyDecodeMinPlannedLossIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.6	Integer32	read-create	Current configurable range: -9900 to 5000.
I32 tnWaveKeyDecodeMinPlannedLossOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.7	Integer32	read-create	Current configurable range: -9900 to 5000.
T/F tnWaveKeyDecodeModifyPowerIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.18	TruthValue	read-only	Indicates whether or not the Detect point power can be modified.
T/F tnWaveKeyDecodeModifyPowerOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.19	TruthValue	read-only	Indicates whether or not the Detect point power can be modified.
INT tnWaveKeyDecodeSupportedDirections	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.1	INTEGER	read-only	The supported directions.
tnWaveKeyDecodeTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.5		not-accessible	This table is a compilation of attributes associated with Wave Key decode capable ports.
I32 tnWaveKeyDecodeTypicalPlannedLossIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.10	Integer32	read-create	Current configurable range: -9900 to 5000.
I32 tnWaveKeyDecodeTypicalPlannedLossOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.11	Integer32	read-create	Current configurable range: -9900 to 5000.
NUM tnWaveKeyDecodeUpstreamDetectIfIndexIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.14	InterfaceIndex	read-only
NUM tnWaveKeyDecodeUpstreamDetectIfIndexOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.15	InterfaceIndex	read-only
I32 tnWaveKeyDecodeUpstreamLossIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.12	Integer32	read-only	Detect point to detect point loss in, calculated at commissioning time. Current configurable range: -9900 to 9900.
I32 tnWaveKeyDecodeUpstreamLossOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.5.1.13	Integer32	read-only	Detect point to detect point loss out, calculated at commissioning time. Current configurable range: -9900 to 9900.
tnWaveKeyEncodeEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1		not-accessible
tnWaveKeyEncodeGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.4
I32 tnWaveKeyEncodeMaxAttainablePower	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.7	Integer32	read-only	The maximum attainable AC output power of the port, measured in mBm. Current range: 0 to 4096.
I32 tnWaveKeyEncodeMinAttainablePower	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.8	Integer32	read-only	The minimum attainable AC output power of the port, measured in mBm. Current range: 0 to 4096.
U32 tnWaveKeyEncodePowerLowerMargin	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.10	Unsigned32	read-only	The amount that the input power could fluctuate by; measured in mB. Current range: 0 to 4096.
U32 tnWaveKeyEncodePowerUpperMargin	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.9	Unsigned32	read-only	The amount that the input power could fluctuate by, measured in mB. Current range: 0 to 4096.
I32 tnWaveKeyEncodePresentNwOutputPowerEx	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.6	Integer32	read-only	The present AC output power of the port (EVOA), measured in mBm. It is the power of the full optical signal. Current range: 0 to 4096.
I32 tnWaveKeyEncodeProgrammedNwOutputPower	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.5	Integer32	read-create	The programmed AC output power of the port (EVOA), measured in mBm. It is the power of the full optical signal. Current configurable range: -2000 to -300 (CAD or COF) -2000 to 200 (2.5 Gig transponders) -2000 to 400 (10 Gig and 40 Gig non-coherent transponders) -2000 to -550 (4 Gig dual port transponders) -1700 to 400 (40 Gig and 100 Gig coherent transponders).
U32 tnWaveKeyEncodeProgrammedWK1	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.1	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected. Sets are not supported. Current range: 0 to 4096.
U32 tnWaveKeyEncodeProgrammedWK2	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.2	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected. Sets are not supported. Current range: 0 to 4096.
tnWaveKeyEncodeTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.4		not-accessible	This table is a compilation of attributes associated with Wave Key encode capable ports.
STR tnWaveKeyEncodeTrailName	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.4	SnmpAdminString	read-only	The trail name of the encode point.
ALU tnWaveKeyEncodeTransmitState	1.3.6.1.4.1.7483.2.2.3.2.2.1.4.1.3	AluWdmDisabledEnabled	read-create	Indicates whether or not Wave Keys are transmitted. Sets are not supported.
tnWaveKeyGroups	1.3.6.1.4.1.7483.2.2.3.2.1.1
tnWaveKeyMibModule	1.3.6.1.4.1.7483.1.1.2.2.3.2			The WT MIB.
tnWaveKeyObjs	1.3.6.1.4.1.7483.2.2.3.2.2
tnWtEncodeCardCapabilityEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.10.1		not-accessible
tnWtEncodeCardCapabilityGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.10
T/F tnWtEncodeCardCapabilityInUse	1.3.6.1.4.1.7483.2.2.3.2.2.1.10.1.3	TruthValue	read-only	Indicates whether or not the Wavelength Tracker feature of any port on the card is in use by the system for services.
T/F tnWtEncodeCardCapabilityPresent	1.3.6.1.4.1.7483.2.2.3.2.2.1.10.1.2	TruthValue	read-only	Indicates whether or not any port on the card is equipped with the Wavelength Tracker feature.
T/F tnWtEncodeCardCapabilityProgrammed	1.3.6.1.4.1.7483.2.2.3.2.2.1.10.1.1	TruthValue	read-only	Indicates whether or not the Wavelength Tracker feature is programmed on any port on the card.
tnWtEncodeCardCapabilityTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.10		not-accessible
tnWtEncodeCardEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.9.1		not-accessible
U32 tnWtEncodeCardExpectedPowerDev	1.3.6.1.4.1.7483.2.2.3.2.2.1.9.1.1	Unsigned32	read-create	Current configurable range: 0 to 1000.
U32 tnWtEncodeCardExpectedPowerTolerance	1.3.6.1.4.1.7483.2.2.3.2.2.1.9.1.2	Unsigned32	read-create	Current configurable range: 0 to 1000.
tnWtEncodeCardGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.9
tnWtEncodeCardTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.9		not-accessible	A table of Wavelength Tracker encode card attributes.
T/F tnWtEncodePortCapabilityEnabledByUser	1.3.6.1.4.1.7483.2.2.3.2.2.1.8.1.4	TruthValue	read-create	Indicates whether or not the user has enabled a port with optional Wavelength Tracker Encode to be used as an encoder. Requires pluggable XFP type programmed for port to support WT encode in order to be set to true.
tnWtEncodePortCapabilityEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.8.1		not-accessible
tnWtEncodePortCapabilityGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.8
T/F tnWtEncodePortCapabilityInUse	1.3.6.1.4.1.7483.2.2.3.2.2.1.8.1.3	TruthValue	read-only	Indicates whether or not the port Wavelength Tracker feature is in use by the system for services.
T/F tnWtEncodePortCapabilityPresent	1.3.6.1.4.1.7483.2.2.3.2.2.1.8.1.2	TruthValue	read-only	Indicates whether or not the port is equipped with the Wavelength Tracker feature.
T/F tnWtEncodePortCapabilityProgrammed	1.3.6.1.4.1.7483.2.2.3.2.2.1.8.1.1	TruthValue	read-create	Indicates whether or not the Wavelength Tracker feature is programmed.
tnWtEncodePortCapabilityTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.8		not-accessible
INT tnWtKeyApplicability	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.13	INTEGER	read-only	Values include: notApplicable - no wave keys configured applicableAndAvailable - wave keys configured and power is available applicableAndUnavailable - wave keys configured and power is unavailable Reasons for a value of applicableAndUnavailable include (but are not restricted to): - The WSS Add Amplet is in a bad area (i.e., input power too high or too low). - There is a module failure.
tnWtKeyDecodeInfoEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.14.1		not-accessible
tnWtKeyDecodeInfoGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.14
I32 tnWtKeyDecodeInfoMaxSupportedExpectedPowerIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.14.1.2	Integer32	read-only
I32 tnWtKeyDecodeInfoMaxSupportedExpectedPowerOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.14.1.3	Integer32	read-only
I32 tnWtKeyDecodeInfoMinSupportedExpectedPowerIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.14.1.4	Integer32	read-only
I32 tnWtKeyDecodeInfoMinSupportedExpectedPowerOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.14.1.5	Integer32	read-only
INT tnWtKeyDecodeInfoSupportedDirections	1.3.6.1.4.1.7483.2.2.3.2.2.1.14.1.1	INTEGER	read-only	The supported directions.
tnWtKeyDecodeInfoTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.14		not-accessible	This table is a compilation of read-only line card attributes associated with Wavelength Tracker key decode capable ports.
tnWtKeyEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1		not-accessible
I32 tnWtKeyExpectedPower	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.5	Integer32	read-create	The power, expressed in units of mBm, is associated with the expected Wave Keys. It is the average power of the Wave Keys. Note that this attribute can be changed by SCOT relatively frequently. So to avoid the possibility of too many change notifications, they will not be sent when this attribute is changed. It must be retrieved when needed. Current configurable range: -9900 to 1100.
U32 tnWtKeyExpectedPowerDev	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.6	Unsigned32	read-create	The allowed deviation of the expected power, expressed in units of mB. Current configurable range: 0 to 1000.
U32 tnWtKeyExpectedPowerTol	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.9	Unsigned32	read-create	The allowed tolerance of the expected power, expressed in units of mB. Current configurable range: 0 to 500.
U32 tnWtKeyExpectedWK1	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.3	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected. Current configurable range: 0 to 4096.
U32 tnWtKeyExpectedWK2	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.4	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected. Current configurable range: 0 to 4096.
tnWtKeyGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.11
I32 tnWtKeyPresentPower	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.7	Integer32	read-only	The power, expressed in units of mBm, associated with the received Wave Keys. The value will be the average, over the sampling interval, of the Wave Keys.
T/F tnWtKeyReceived	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.8	TruthValue	read-only	A indication that the two expected Wave Keys are present on a particular channel.
TNO tnWtKeyStatus	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.12	TnOchStatus	read-only
tnWtKeySummaryEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.13.1		not-accessible
OCT tnWtKeySummaryExpectedWKMaskIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.13.1.1	OCTET STRING	read-only	Summary of channels in the IN direction against which expected Wave Keys have been programmed.
OCT tnWtKeySummaryExpectedWKMaskOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.13.1.2	OCTET STRING	read-only	Summary of channels in the OUT direction against which expected Wave Keys have been programmed.
tnWtKeySummaryGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.13
OCT tnWtKeySummaryReceivedWKMaskIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.13.1.3	OCTET STRING	read-only	Summary of channels in the IN direction against which Wave Keys have been received.
OCT tnWtKeySummaryReceivedWKMaskOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.13.1.4	OCTET STRING	read-only	Summary of channels in the OUT direction against which Wave Keys have been received.
INT tnWtKeySummarySupportedDirections	1.3.6.1.4.1.7483.2.2.3.2.2.1.13.1.7	INTEGER	read-only	The supported directions.
tnWtKeySummaryTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.13		not-accessible	This table provides a quick summary of the state of the Wavelength Tracker functionality on all Wavelength Tracker decode ports. The summary attributes are octet strings. As an example, the following 6 octets are returned in summary MIB attribute tnWtKeySummaryExpectedWKMaskIn: 00000100 00000000 00001000 01000010 00000000 11000000 \| \| \| \| \| \| \| \| 60 55 52 45 40 35 30 19 Each bit represents an ITU channel. The ITU channel numbers decrement from the MSB of the 1st octet. In the above data, there are expected wave keys on ITU channels 55, 40, 35, 30, 20, 19. The remaining ITU channels have no expected wave keys.
OCT tnWtKeySummaryUnexpectedWKMaskIn	1.3.6.1.4.1.7483.2.2.3.2.2.1.13.1.5	OCTET STRING	read-only	Summary of channels in the IN direction against which unexpected Wave Keys have been received.
OCT tnWtKeySummaryUnexpectedWKMaskOut	1.3.6.1.4.1.7483.2.2.3.2.2.1.13.1.6	OCTET STRING	read-only	Summary of channels in the OUT direction against which unexpected Wave Keys have been received.
TNC tnWtKeySynchronizePower	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.10	TnCommand	read-create	Setting this attribute to a value of execute sets the expected power equal to the present power. If the present power is unavailable the set will be failed back to the user. When read, this attribute always returns noCmd.
tnWtKeyTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.11		not-accessible	Through this table, a network operator may configure, with direction/channel granularity, expected Wave Keys and the power level of the Wave Keys. The network operator can also read back the present power level of the Wave Keys on a particular channel, if they are present.
STR tnWtKeyTrailName	1.3.6.1.4.1.7483.2.2.3.2.2.1.11.1.11	SnmpAdminString	read-only	The trail name of the encode point.
tnWtocmaChanConfigEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.19.1		not-accessible
tnWtocmaChanConfigGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.19
T/F tnWtocmaChanConfigOndemandScan	1.3.6.1.4.1.7483.2.2.3.2.2.1.19.1.1	TruthValue	read-create	Selected for On-demand OSNR scan.
tnWtocmaChanConfigTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.19		not-accessible	Through this table, a network operator may create and read back, with channel granularity, the scan selected status.
tnWtocmChanInfoEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.15.1		not-accessible
U32 tnWtocmChanInfoExpectedWK1	1.3.6.1.4.1.7483.2.2.3.2.2.1.15.1.1	Unsigned32	read-only	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected. Current range: 0 to 4096.
U32 tnWtocmChanInfoExpectedWK2	1.3.6.1.4.1.7483.2.2.3.2.2.1.15.1.2	Unsigned32	read-only	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected. Current range: 0 to 4096.
tnWtocmChanInfoGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.15
TIM tnWtocmChanInfoOSNRTimeStamp	1.3.6.1.4.1.7483.2.2.3.2.2.1.15.1.8	TimeStamp	read-only	The attribute indicates the time of the latest OSNR for each channel in LC.
I32 tnWtocmChanInfoPresentOSNR	1.3.6.1.4.1.7483.2.2.3.2.2.1.15.1.7	Integer32	read-only	The OSNR, expressed in units of mB, associated with the received channel at the WTOCMA IN port. A value of -9900 is reported if power < input threshold.
I32 tnWtocmChanInfoPresentPower	1.3.6.1.4.1.7483.2.2.3.2.2.1.15.1.3	Integer32	read-only	The power, expressed in units of mBm, associated with the received channel at the WTOCM input port. A value of -9900 is reported if power < input threshold.
I32 tnWtocmChanInfoPresentPowerMonitoredPort	1.3.6.1.4.1.7483.2.2.3.2.2.1.15.1.4	Integer32	read-only	The power, expressed in units of mBm, associated with the received channel at the associated monitored port. A value of -9900 is reported if power < input threshold.
INT tnWtocmChanInfoProcessingState	1.3.6.1.4.1.7483.2.2.3.2.2.1.15.1.6	INTEGER	read-only	Values include: notProvisionedAndNotPresent - not provisioned, no channel power present notProvisionedAndUnconfirmed - not prov, wavekey processing in progress notProvisionedAndChannelPresentNoKeys - not prov, wavekey processing complete, channel power present, no wavekeys notProvisionedAndUnexpected - not prov, wavekey processing complete, channel power present, with wavekeys notProvisionedAndHardwareFault - not prov, h/w fault provisionedAndNotPresent - prov, no channel power present provisionedAndUnconfirmed - prov, wavekey processing in progress provisionedAndChannelPresentNoKeys - prov, wavekey processing complete, channel power present, no wavekeys provisionedAndUnexpected - prov, wavekey processing complete, channel power present, unexpected wavekeys provisionedWithExpectedAndUnexpected - prov, wavekey processing complete, channel power present, expected and unexpected wavekeys provisionedAndConfirmed - prov, wavekey processing complete, channel power present, expected wavekeys provisionedAndHardwareFault - prov, h/w fault.
OCT tnWtocmChanInfoSummaryConfirmWKMask	1.3.6.1.4.1.7483.2.2.3.2.2.1.17.1.3	OCTET STRING	read-only	Summary of channels against which channels have EXPECTED keys for PROVISIONED channels. 0 = keys not provisioned OR keys are provisioned but keys are not processed yet 1 = keys are provisioned, processed, and present.
tnWtocmChanInfoSummaryEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.17.1		not-accessible
OCT tnWtocmChanInfoSummaryExpectedWKMask	1.3.6.1.4.1.7483.2.2.3.2.2.1.17.1.1	OCTET STRING	read-only	Summary of channels against which expected Wave Keys have been programmed. 0 = channels have no keys provisioned 1 = channels have keys provisioned.
tnWtocmChanInfoSummaryGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.17
OCT tnWtocmChanInfoSummaryNoLosWKMask	1.3.6.1.4.1.7483.2.2.3.2.2.1.17.1.2	OCTET STRING	read-only	Summary of channels against which channels have power greater than WTOCM input LOS threshold. 0 = channels have no detected power 1 = channels have power detected.
OCT tnWtocmChanInfoSummaryProcessedWKMask	1.3.6.1.4.1.7483.2.2.3.2.2.1.17.1.5	OCTET STRING	read-only	Summary of channels against which Wave Keys have been processed. 0 = no need to process, no power measured OR power measured and processing not complete 1 = power is received and processing is complete.
tnWtocmChanInfoSummaryTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.17		not-accessible	This table provides a quick summary of the state of the Wavelength Tracker functionality within the WTOCM. The summary attributes are octet strings. As an example, the following 6 octets are returned in summary MIB attribute tnChanInfoSummaryExpectedWKMaskIn: 00000100 00000000 00001000 01000010 00000000 11000000 \| \| \| \| \| \| \| \| 60 55 52 45 40 35 30 19 Each bit represents an ITU channel. The ITU channel numbers decrement from the MSB of the first octet. In the above data, there are expected wave keys on ITU channels 55, 40, 35, 30, 20, 19. The remaining ITU channels have no expected wave keys.
OCT tnWtocmChanInfoSummaryUnexpectedWKMask	1.3.6.1.4.1.7483.2.2.3.2.2.1.17.1.4	OCTET STRING	read-only	Summary of channels against which unexpected Wave Keys have been received. 0 = keys not processed OR keys processed and no UNEXPECTED found 1 = keys processed and UNEXPECTED found.
tnWtocmChanInfoTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.15		not-accessible	Through this table, a network operator may read back, with channel granularity, expected Wave Keys and the power level of the channels.
tnWtocmUnexpectedChannelInfoEntry	1.3.6.1.4.1.7483.2.2.3.2.2.1.18.1		not-accessible
tnWtocmUnexpectedChannelInfoGroup	1.3.6.1.4.1.7483.2.2.3.2.1.1.18
tnWtocmUnexpectedChannelInfoTable	1.3.6.1.4.1.7483.2.2.3.2.2.1.18		not-accessible	This table provides a complete list of all unexpected received Wave Keys.
U32 tnWtocmUnexpectedChannelInfoUnexpectedWtKey	1.3.6.1.4.1.7483.2.2.3.2.2.1.18.1.1	Unsigned32	read-only	The list of all unexpected tones on the channel, up to a maximum of 16.

RFC description

Nokia TROPIC WaveKey optical transport management and configuration.

Start monitoring Nokia Tropic optical transport/DWDM equipment (wavelength-key/channel-security provisioning status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-WAVEKEY-MIB

What Is TROPIC-WAVEKEY-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description