TROPIC-OCH-MIB

All MIBs › TROPIC-OCH-MIB

Organization: Nokia

Last Updated: 2015-12-15

Category: Nokia Optical Transport

Description: Covers configuration, wavelength assignment, and performance data for optical channels (OCh) on Nokia Tropic equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-OCH-MIB?

TROPIC-OCH-MIB is part of Nokia's Tropic DWDM optical transport MIB suite, modeling the Optical Channel (OCh) layer that carries an individual wavelength through a DWDM network. It defines configuration objects for wavelength assignment along with performance data associated with each optical channel. Its monitoring role is centered on hardware/optical status: tracking wavelength assignments and channel-level performance to detect degraded optical power, drift, or a channel that has failed to come into service. It belongs to the same Tropic MIB family as TROPIC-AMPLIFIER-MIB and TROPIC-OTH-MIB, sharing common structural conventions for the optical layer stack. It is deployed on Nokia DWDM network elements in service-provider optical backbone networks. Engineers can download the TROPIC-OCH-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-OCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia (Alcatel-Lucent) Tropic DWDM optical transport network element

Monitoring Examples

No sample object names were provided for this module. Based on its description, an admin would typically poll wavelength-assignment and OCh performance objects to confirm a given optical channel is provisioned to the expected wavelength and operating at acceptable power/quality levels, with a deviation indicating a degrading transponder or fiber issue affecting that channel.

What Can Be Monitored

optical channel wavelength assignment
optical channel performance data
optical channel operational status

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

From TROPIC-GLOBAL-REG

tnOchMIB	OBJECT-IDENTITY
tnPortModules	OBJECT-IDENTITY

From TROPIC-TC

AluWdmDisabledEnabled
AluWdmOtuBitRate
AluWdmOtuEncoding
TnCommand

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnOchMibModule	1.3.6.1.4.1.7483.1.1.2.2.4.2
tnOchConf	1.3.6.1.4.1.7483.2.2.4.5.1
tnOchGroups	1.3.6.1.4.1.7483.2.2.4.5.1.1
tnOchTrailGroup	1.3.6.1.4.1.7483.2.2.4.5.1.1.2
tnOchXcItuGroup	1.3.6.1.4.1.7483.2.2.4.5.1.1.3
tnOchXcItuIdGroup	1.3.6.1.4.1.7483.2.2.4.5.1.1.4
tnOchGroupXcItuGroup	1.3.6.1.4.1.7483.2.2.4.5.1.1.5
tnOchGroupXcItuIdGroup	1.3.6.1.4.1.7483.2.2.4.5.1.1.6
tnOchCompliances	1.3.6.1.4.1.7483.2.2.4.5.1.2
tnOchCompliance	1.3.6.1.4.1.7483.2.2.4.5.1.2.1
tnOchObjs	1.3.6.1.4.1.7483.2.2.4.5.2
tnOchBasics	1.3.6.1.4.1.7483.2.2.4.5.2.1
tnOchTrailTable	1.3.6.1.4.1.7483.2.2.4.5.2.1.2		not-accessible	This table provides a complete list of all the OCH trails in a 1696R/1830 NE network.
tnOchTrailEntry	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1		not-accessible
IP tnOchTrailIpAddress	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.1	IpAddress	not-accessible
NUM tnOchTrailifIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.2	InterfaceIndex	not-accessible
STR tnOchTrailName	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.3	SnmpAdminString	read-only
U32 tnOchTrailWaveKey1	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.4	Unsigned32	read-only
U32 tnOchTrailWaveKey2	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.5	Unsigned32	read-only
U32 tnOchTrailITUChannel	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.6	Unsigned32	read-only
ALU tnOchTrailItuBitRate	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.7	AluWdmOtuBitRate	read-only	The ITU bit rate for the trail. 10000 is unknown.
ALU tnOchTrailItuEncoding	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.8	AluWdmOtuEncoding	read-only	The modulation type for the trail. 10000 is unknown.
U32 tnOchTrailItuSrcOTType	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.9	Unsigned32	read-only	The source node OT type for the trail
I32 tnOchTrailEncoderDomain	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.10	Integer32	read-only	The domain number for the degree the encoder launches out of. Advertised in opaque type 10 LSA. Current range: -1 to 19.
T/F tnOchTrailWaveKeyDupsUnlocked	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.11	TruthValue	read-only	Whether the OCH frequency of the channel is unlocked for use of duplicate wavekey pairs for its domain. Advertised in opaque type 10 LSA.
I32 tnOchTrailEncoderDomainProt	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.12	Integer32	read-only	The domain number for the degree the encoder launches out of for the protect XC of OPS protected demand. Advertised in opaque type 10 LSA. Current range: -1 to 19.
T/F tnOchTrailWaveKeyDupsUnlockedProt	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.13	TruthValue	read-only	Whether the OCH frequency of the channel is unlocked for use of duplicate wavekey pairs for its domain for the protect XC of OPS protected demand. Advertised in opaque type 10 LSA.
U32 tnOchTrailItuSpectralWidth	1.3.6.1.4.1.7483.2.2.4.5.2.1.2.1.14	Unsigned32	read-only	The channel spectral width allocation for the trail in MHz.
tnOchXcItuTable	1.3.6.1.4.1.7483.2.2.4.5.2.1.3		not-accessible
tnOchXcItuEntry	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1		not-accessible
NUM tnOchXcItuSrcIfIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.1	InterfaceIndex	not-accessible	The ifIndex of the connection source.
U32 tnOchXcItuSrcChannel	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.2	Unsigned32	not-accessible	The channel of the connection source.
NUM tnOchXcItuDestIfIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.3	InterfaceIndex	not-accessible	The ifIndex of the connection destination.
U32 tnOchXcItuDestChannel	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.4	Unsigned32	not-accessible	The channel of the connection destination.
U32 tnOchXcItuId	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.5	Unsigned32	read-only	The ID of the connection. It is used as the object ID value in traps, alarms and logs.
STR tnOchXcItuName	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.6	SnmpAdminString	read-create	The description of the connection. Sets are restricted to a length of 60 characters.
T/F tnOchXcItuBidirectional	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.7	TruthValue	read-create	An indication as to whether or not this connection is bidirectional or unidirectional.
U32 tnOchXcItuEncodedWaveKey1AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.8	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchXcItuWaveKeyAutoSelect is true, tnOchXcItuEncodedWaveKey1AZ and tnOchXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchXcItuEncodedWaveKey1ZA and tnOchXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchXcItuEncodedWaveKey2AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.9	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchXcItuWaveKeyAutoSelect is true, tnOchXcItuEncodedWaveKey1AZ and tnOchXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchXcItuEncodedWaveKey1ZA and tnOchXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchXcItuEncodedWaveKey1ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.10	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchXcItuWaveKeyAutoSelect is true, tnOchXcItuEncodedWaveKey1AZ and tnOchXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchXcItuEncodedWaveKey1ZA and tnOchXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchXcItuEncodedWaveKey2ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.11	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchXcItuWaveKeyAutoSelect is true, tnOchXcItuEncodedWaveKey1AZ and tnOchXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchXcItuEncodedWaveKey1ZA and tnOchXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
INT tnOchXcItuAutoWaveKeySelect	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.12	INTEGER	read-create	Indicates how the OCH XC's Wave Keys are selected and distributed to other nodes.
TRO tnOchXcItuAdminState	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.13	TropicOchXcStateType	read-create	The administrative state of the connection. Setting this attribute to a value of unknown is restricted.
TRO tnOchXcItuOperState	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.14	TropicOchXcStateType	read-only	The operational state of the connection.
TRO tnOchXcItuStateQualifier	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.15	TropicOchXcStateQualifierType	read-only	The state qualifier of the connection.
INT tnOchXcItuProtectionState	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.16	INTEGER	read-create	The protection state of the connection.
T/F tnOchXcItuForceDeletion	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.17	TruthValue	read-create	When read, this attribute always returns a value of false.
ROW tnOchXcItuRowStatus	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.18	RowStatus	read-create	Currently all entries have a row status of active. Sets are permitted with values of createAndGo and destroy, exclusively.
INT tnOchXcItuAcceptPowers	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.19	INTEGER	read-create	Synchronize the expected powers to the observed values.
ALU tnOchXcItuOperCapability	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.20	AluWdmDisabledEnabled	read-only	The operational capability of the connection.
INT tnOchXcItuType	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.21	INTEGER	read-only	The type of connection.
INT tnOchXcItuPowerMgmtType	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.22	INTEGER	read-only	The type of power management.
OCT tnOchXcItuTopology	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.23	OCTET STRING	read-only	The topology used by the cross connection, including the ifIndex of each point in the topology. Each ifIndex is represented by 4 bytes of the octet string. All points are concatenated.
OCT tnOchXcItuTopologyZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.24	OCTET STRING	read-only	The topology used by the cross connection from Z to A, including the ifIndex of each point in the topology. Each ifIndex is represented by 4 bytes of the octet string. All points are concatenated.
ALU tnOchXcItuBitRateAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.25	AluWdmOtuBitRate	read-only	Received ITU bit rate from opaque LSA for this XC in AZ direction. 9998 means it's unassigned.
ALU tnOchXcItuBitRateZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.26	AluWdmOtuBitRate	read-only	Received ITU bit rate from opaque LSA for this XC in ZA direction. 9998 means it's unassigned.
ALU tnOchXcItuEncodingAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.27	AluWdmOtuEncoding	read-only	Received source modulation type from opaque LSA for this XC in AZ direction. 9998 means it's unassigned.
ALU tnOchXcItuEncodingZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.28	AluWdmOtuEncoding	read-only	Received source modulation type from opaque LSA for this XC in ZA direction. 9998 means it's unassigned.
ALU tnOchXcItuUserBitRateAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.29	AluWdmOtuBitRate	read-create	User assigned ITU bit rate for this XC in AZ direction. Valid range to be set by user is 1 to 9000, and 9998. Setting 9998 clears. Must be set with tnOchXcItuUserEncodingAZ.
ALU tnOchXcItuUserBitRateZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.30	AluWdmOtuBitRate	read-create	User assigned ITU bit rate for this XC in ZA direction. Valid range to be set by user is 1 to 9000, and 9998. Setting 9998 clears. Must be set with tnOchXcItuUserEncodingZA.
ALU tnOchXcItuUserEncodingAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.31	AluWdmOtuEncoding	read-create	User assigned modulation type set for this XC in AZ direction. Valid range to be set by user is 1 to 9000, and 9998. Setting 9998 clears. Must be set with tnOchXcItuUserBitRateAZ.
ALU tnOchXcItuUserEncodingZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.32	AluWdmOtuEncoding	read-create	User assigned modulation type set for this XC in AZ direction. Valid range to be set by user is 1 to 9000, and 9998. Setting 9998 clears. Must be set with tnOchXcItuUserBitRateZA.
INT tnOchXcItuWaveKeySelectPreference	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.33	INTEGER	read-create	Encoder key selection preference for add XC. Setting DupsOk allows use of duplicated key pairs in the domain for this OCH frequency throughout domain. Can be entered at XC creation time or altered via rekey with duplicates command.
I32 tnOchXcItuEncoderDomainAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.34	Integer32	read-create	Displays originating domain number of encoder for AZ direction. -1 indicates not yet received via LSA. Current configurable range: -1 to 19.
I32 tnOchXcItuEncoderDomainZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.35	Integer32	read-create	Displays originating domain number of encoder for ZA direction. -1 indicates not yet received via LSA. Current configurable range: -1 to 19.
INT tnOchXcItuWaveKeyDupsUnlockedAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.36	INTEGER	read-create	Displays whether WT key pair re-use is unlocked for this OCh frequency in AZ direction. notReceived(1) indicates not yet received via LSA.
INT tnOchXcItuWaveKeyDupsUnlockedZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.37	INTEGER	read-create	Displays whether WT key pair re-use is unlocked for this OCh frequency in ZA direction. notReceived(1) indicates not yet received via LSA.
TNC tnOchXcItuRekeyWithDuplicatesAllowed	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.38	TnCommand	read-create	Can only be executed for add XC. Set execute(2) to rekey the encoder with WT key pair re-use allowed. When read this attribute always returns noCmd(1).
I32 tnOchXcItuEncoderDomainProtectAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.39	Integer32	read-create	Displays originating domain number of encoder for AZ direction for protection XC of OPS protected source. -1 indicates not yet received via LSA. Current configurable range: -1 to 19.
I32 tnOchXcItuEncoderDomainProtectZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.40	Integer32	read-create	Displays originating domain number of encoder for ZA direction for protection XC of OPS protected source. -1 indicates not yet received via LSA. Current configurable range: -1 to 19.
INT tnOchXcItuWaveKeyDupsUnlockedProtectAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.41	INTEGER	read-create	Displays whether WT key pair re-use is unlocked for this OCh frequency in AZ direction for the protection XC of OPS protected source. notReceived(1) indicates not yet received via LSA.
INT tnOchXcItuWaveKeyDupsUnlockedProtectZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.42	INTEGER	read-create	Displays whether WT key pair re-use is unlocked for this OCh frequency in ZA direction. notReceived(1) indicates not yet received via LSA.
U32 tnOchXcItuSpectralWidth	1.3.6.1.4.1.7483.2.2.4.5.2.1.3.1.43	Unsigned32	read-create	The channel spectral width allocation in MHz.
tnOchXcItuIdTable	1.3.6.1.4.1.7483.2.2.4.5.2.1.4		not-accessible	This table may be used as a lookup for the full OCH XC index given an OCH XC ID. The OCH XC ID may be found in the object ID of traps, alarms, and logs. Get next requests are not supported in this table.
tnOchXcItuIdEntry	1.3.6.1.4.1.7483.2.2.4.5.2.1.4.1		not-accessible
NUM tnOchXcItuIdSrcIfIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.4.1.1	InterfaceIndex	read-only	The ifIndex of the connection source.
U32 tnOchXcItuIdSrcChannel	1.3.6.1.4.1.7483.2.2.4.5.2.1.4.1.2	Unsigned32	read-only	The channel of the connection source.
NUM tnOchXcItuIdDestIfIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.4.1.3	InterfaceIndex	read-only	The ifIndex of the connection destination.
U32 tnOchXcItuIdDestChannel	1.3.6.1.4.1.7483.2.2.4.5.2.1.4.1.4	Unsigned32	read-only	The channel of the connection destination.
tnOchGroupXcItuTable	1.3.6.1.4.1.7483.2.2.4.5.2.1.5		not-accessible
tnOchGroupXcItuEntry	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1		not-accessible
NUM tnOchGroupXcItuSrcIfIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.1	InterfaceIndex	not-accessible	The first interface index for the L1 port of the connection group sources .
U32 tnOchGroupXcItuSrcChannel1	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.2	Unsigned32	not-accessible	The first channel of the connection source.
NUM tnOchGroupXcItuDestIfIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.3	InterfaceIndex	not-accessible	The first interface index of the connection destination.
U32 tnOchGroupXcItuDestChannel1	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.4	Unsigned32	not-accessible	The first channel of the connection destination.
U32 tnOchGroupXcItuSrcChannel2	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.5	Unsigned32	read-create	The second channel of the connection source.
U32 tnOchGroupXcItuDestChannel2	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.6	Unsigned32	read-create	The second channel of the connection destination.
U32 tnOchGroupXcItuSrcChannel3	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.7	Unsigned32	read-create	The third channel of the connection source.
U32 tnOchGroupXcItuDestChannel3	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.8	Unsigned32	read-create	The third channel of the connection destination.
U32 tnOchGroupXcItuSrcChannel4	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.9	Unsigned32	read-create	The fourth channel of the connection source.
U32 tnOchGroupXcItuDestChannel4	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.10	Unsigned32	read-create	The fourth channel of the connection destination.
U32 tnOchGroupXcItuGroupId	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.11	Unsigned32	read-only	The ID of the connection group. It is used as the object ID value in traps, alarms and logs.
U32 tnOchGroupXcItuId1	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.12	Unsigned32	read-only	The ID of the first connection in the group.
U32 tnOchGroupXcItuId2	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.13	Unsigned32	read-only	The ID of the second connection in the group.
U32 tnOchGroupXcItuId3	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.14	Unsigned32	read-only	The ID of the third connection in the group.
U32 tnOchGroupXcItuId4	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.15	Unsigned32	read-only	The ID of the fourth connection in the group.
STR tnOchGroupXcItuName	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.16	SnmpAdminString	read-create	The description of the connection. Sets are restricted to a length of 60 characters.
T/F tnOchGroupXcItuBidirectional	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.17	TruthValue	read-create	An indication as to whether or not this connection is bidirectional or unidirectional.
U32 tnOchGroupXcItuEncodedWaveKey1AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.18	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey2AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.19	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey3AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.20	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey4AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.21	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey5AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.22	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey6AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.23	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey7AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.24	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey8AZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.25	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the forward direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey1ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.26	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey2ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.27	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey3ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.28	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey4ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.29	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey5ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.30	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey6ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.31	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey7ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.32	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
U32 tnOchGroupXcItuEncodedWaveKey8ZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.33	Unsigned32	read-create	One of many possible Wave Keys expected to be riding on a particular channel. A value of zero indicates no Wave Key expected in the reverse direction. If, without setting any other attributes and tnOchGroupXcItuWaveKeyAutoSelect is true, tnOchGroupXcItuEncodedWaveKey1AZ and tnOchGroupXcItuEncodedWaveKey2AZ have been set and their values have been set to 0, or tnOchGroupXcItuEncodedWaveKey1ZA and tnOchGroupXcItuEncodedWaveKey2ZA have been set and their values have been set to 0, a rekey will be performed in the AZ or ZA directions. Current configurable range: 0 to 4096.
INT tnOchGroupXcItuAutoWaveKeySelect	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.34	INTEGER	read-create	Indicates how the OCH XC's Wave Keys are selected and distributed to other nodes.
TRO tnOchGroupXcItuAdminState	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.35	TropicOchXcStateType	read-create	The administrative state of the connection group. Setting this attribute to a value of unknown is restricted.
INT tnOchGroupXcItuProtectionState	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.36	INTEGER	read-create	The protection state of the connection group.
T/F tnOchGroupXcItuForceDeletion	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.37	TruthValue	read-create	When read, this attribute always returns a value of false.
ROW tnOchGroupXcItuRowStatus	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.38	RowStatus	read-create	Currently all entries have a row status of active. Sets are permitted with values of createAndGo and destroy, exclusively.
INT tnOchGroupXcItuAcceptPowers	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.39	INTEGER	read-create	Synchronize the expected powers to the observed values.
INT tnOchGroupXcItuType	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.40	INTEGER	read-only	The type of connection group.
INT tnOchGroupXcItuPowerMgmtType	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.41	INTEGER	read-only	The type of power management.
ALU tnOchGroupXcItuUserBitRateAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.42	AluWdmOtuBitRate	read-create	User assigned ITU bit rate for this XC in AZ direction. Setting it to 9998 clears. It must be set with tnOchGroupXcItuUserEncodingAZ. Current configurable range: 1 to 9000 and 9998.
ALU tnOchGroupXcItuUserBitRateZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.43	AluWdmOtuBitRate	read-create	User assigned ITU bit rate for this XC in ZA direction. Setting it to 9998 clears. It must be set with tnOchGroupXcItuUserEncodingZA. Current configurable range: 1 to 9000 and 9998.
ALU tnOchGroupXcItuUserEncodingAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.44	AluWdmOtuEncoding	read-create	User assigned modulation type set for this XC in AZ direction. Setting it to 9998 clears. It must be set with tnOchGroupXcItuUserBitRateAZ. Current configurable range: 1 to 9000 and 9998.
ALU tnOchGroupXcItuUserEncodingZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.45	AluWdmOtuEncoding	read-create	User assigned modulation type set for this XC in AZ direction. Setting it to 9998 clears. It must be set with tnOchGroupXcItuUserBitRateZA. Current configurable range: 1 to 9000 and 9998.
ALU tnOchGroupXcItuBitRateAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.46	AluWdmOtuBitRate	read-only	Received ITU bit rate from opaque LSA for this XC Group in AZ direction. 9998 means it's unassigned.
ALU tnOchGroupXcItuBitRateZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.47	AluWdmOtuBitRate	read-only	Received ITU bit rate from opaque LSA for this XC Group in ZA direction. 9998 means it's unassigned.
ALU tnOchGroupXcItuEncodingAZ	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.48	AluWdmOtuEncoding	read-only	Received source modulation type from opaque LSA for this XC Group in AZ direction. 9998 means it's unassigned.
ALU tnOchGroupXcItuEncodingZA	1.3.6.1.4.1.7483.2.2.4.5.2.1.5.1.49	AluWdmOtuEncoding	read-only	Received source modulation type from opaque LSA for this XC Group in ZA direction. 9998 means it's unassigned.
tnOchGroupXcItuIdTable	1.3.6.1.4.1.7483.2.2.4.5.2.1.6		not-accessible	This table may be used as a lookup for the full OCH Group XC index with an OCH GroupXC ID. The OCH Group XC ID may be found in the object ID of traps, alarms,and logs. Get next requests are not supported in this table.
tnOchGroupXcItuIdEntry	1.3.6.1.4.1.7483.2.2.4.5.2.1.6.1		not-accessible
NUM tnOchGroupXcItuIdSrcIfIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.6.1.1	InterfaceIndex	read-only	The first ifIndex of the connection group source.
U32 tnOchGroupXcItuIdSrcChannel1	1.3.6.1.4.1.7483.2.2.4.5.2.1.6.1.2	Unsigned32	read-only	The first channel of the connection group source.
NUM tnOchGroupXcItuIdDestIfIndex	1.3.6.1.4.1.7483.2.2.4.5.2.1.6.1.3	InterfaceIndex	read-only	The first ifIndex of the connection group destination.
U32 tnOchGroupXcItuIdDestChannel1	1.3.6.1.4.1.7483.2.2.4.5.2.1.6.1.4	Unsigned32	read-only	The first channel of the connection group destination.

RFC description

Manages Nokia Tropic optical channel (OCh) configuration, wavelength assignment, and performance data.

Start monitoring Nokia (Alcatel-Lucent) Tropic DWDM optical transport network element (per-wavelength optical channel performance status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-OCH-MIB

What Is TROPIC-OCH-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description