TROPIC-OPTICALCARD-MIB

All MIBs › TROPIC-OPTICALCARD-MIB

Organization: Nokia

Last Updated: 2016-04-08

Category: Nokia Optical Transport

Description: Manages Nokia Tropic optical line card hardware configuration, state, and performance monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-OPTICALCARD-MIB?

TROPIC-OPTICALCARD-MIB is a private vendor MIB from Nokia for its Tropic WDM optical transport product line, focused specifically on optical line cards -- covering their hardware configuration, operational state, and performance monitoring at the optical layer (e.g., wavelength/channel parameters). It exposes configuration data for optical card settings alongside operational status and performance counters relevant to optical signal transport. In monitoring terms it is used for both hardware status (card operational/administrative state, presence, alarms) and optical-layer performance (signal quality/power-related metrics implied by 'performance monitoring' in its description), making it central to detecting degrading optical signal quality or a failing optical module before a service-affecting outage. It complements the more general TROPIC-CARD-MIB, adding optics-specific detail, and works alongside the Tropic notification MIBs that raise alarms based on the conditions this module tracks. It is deployed in Nokia Tropic WDM network elements used by carriers for optical transport networks, where TROPIC-OPTICALCARD-MIB SNMP monitoring catches degrading optical signal quality before service is affected.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-OPTICALCARD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia Tropic WDM optical line card / network element

Monitoring Examples

No sample object names were provided for this module, but consistent with its stated purpose an admin would poll optical card performance-monitoring parameters (such as received/transmitted optical power or channel status) to catch a gradually degrading optical signal, and check the card's operational state to confirm it remains in-service rather than flagged with a hardware alarm.

Imported Objects

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TruthValue

From TROPIC-GLOBAL-REG

tnCardModules	OBJECT-IDENTITY
tnOpticalCardMIB	OBJECT-IDENTITY

From TROPIC-SHELF-MIB

tnShelfIndex

OBJECT-TYPE

From TROPIC-SLOT-MIB

tnSlotIndex

OBJECT-TYPE

From TROPIC-TC

TnCommand
TropicLEDColorType
TropicLEDStateType

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnOpticalCardMibModule	1.3.6.1.4.1.7483.1.1.2.2.3.5			The card-specific attributes for Nokia WDM network elements.
tnOpticalCardConf	1.3.6.1.4.1.7483.2.2.3.5.1
tnOpticalCardGroups	1.3.6.1.4.1.7483.2.2.3.5.1.1
tnOpticalCardScalarsGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.1
tnDcmCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.4
tnPowerControlCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.8
tnWssCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.9
tnSfdCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.10
tnSonetSdhPpSectionCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.11
tnPcsSectionCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.12
tn11dpge12CardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.14
tnSfcCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.15
tn4dpa4CardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.16
tnOpsaCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.17
tn11dpe12eCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.18
tn1dpp24mCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.19
tn43sca1CardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.20
tnOpsCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.21
tn11dpe12aCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.22
tnCardFunctionModeGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.23
tn112pdm11CardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.24
tnPtpctlCardScalarsGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.25
tnPtpctlCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.26
tnWtocmaCardScalarsGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.27
tnWtocmaCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.28
tnCruCardScalarsGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.29
tnCruCardGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.30
tnIroadmCardConfigScalarsGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.31
tnIroadmCardConfigGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.32
tnIroadmCardInfoScalarsGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.33
tnIroadmCardInfoGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.34
tnIsonCardModeScalarsGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.35
tnIsonCardModeGroup	1.3.6.1.4.1.7483.2.2.3.5.1.1.36
tnOpticalCardCompliances	1.3.6.1.4.1.7483.2.2.3.5.1.2
tnOpticalCardCompliance	1.3.6.1.4.1.7483.2.2.3.5.1.2.1
tnOpticalCardObjs	1.3.6.1.4.1.7483.2.2.3.5.2
I32 tnOpticalCardTotal	1.3.6.1.4.1.7483.2.2.3.5.2.1	Integer32	read-only	The total number of optical card records allocated on a 1696ROADM/1830 NE.
tnDcmCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.4		not-accessible	A table of DCM card specific attributes.
tnDcmCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.4.1		not-accessible
U32 tnDcmCardProgrammedCompensationDistance	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.1	Unsigned32	read-create	The programmed compensation distance associated with this DCM card. Current configurable range 1696R: 15 to 100. Possible programmed values are 15, 40, 60, 80 and 100. A value of 0 indicates that the distance is not defined. Current configurable range 1830: 10 to 240. Possible programmed values are 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, and 140, 160, 180, 200, 220, and 240. A value of 0 indicates that the distance is not defined.
U32 tnDcmCardPresentCompensationDistance	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.2	Unsigned32	read-only	The present compensation distance associated with this DCM card. Not applicable to the 1830 PSS-32.
STR tnDcmCardSize	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.3	SnmpAdminString	read-only	The length of TRANSMISSION fiber that the DCM is designed to compensate (unit:km).
STR tnDcmCardFiberType	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.4	SnmpAdminString	read-only	The type of fiber that the DCM is designed to dispersion-compensate.
STR tnDcmCardAverageInsertionLoss	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.5	SnmpAdminString	read-only	The measured insertion loss averaged over wavelength with no external attenuation added to the DCM (unit:dB).
STR tnDcmCardInsertionLossSlope	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.6	SnmpAdminString	read-only	A linear least-squares fitted slope of the measured attenuation (positive or negative) over the wavelength range with no external attenuation added to the DCM (unit: dB). The slope is defined over the full wavelength range with a negative slope signifying a higher insertion loss at the lower wavelength.
STR tnDcmCardAverageInsertionLossPad	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.7	SnmpAdminString	read-only	The measured insertion loss averaged over wavelength with external attenuation added to the DCM (unit: dB).
STR tnDcmCardInsertionLossSlopePad	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.8	SnmpAdminString	read-only	A linear least-squares fitted slope of the measured attenuation (positive or negative) over the wavelength range with external attenuation added to the DCM (unit: dB). The slope is defined over the full wavelength range with a negative slope signifying a higher insertion loss at the lower wavelength.
STR tnDcmCardTotalDispTilt	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.9	SnmpAdminString	read-only	Coefficients A, B, C and D of a 3rd order polynomial fit of Chromatic dispersion vs. wavelength from 1528 to 1565nm in 0.4-2.0nm steps such that TotalDispersion = A(l-1546)3 + B(l-1546)2 + C*(l-1546) + D.
STR tnDcmCardDispFiberLength	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.10	SnmpAdminString	read-only	The total length of dispersion fiber inside the DCM module, to the closest km.
STR tnDcmCardPMD	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.11	SnmpAdminString	read-only	The value for Polarization mode dispersion (unit: ps).
INT tnDcmCardProvisionedFiberType	1.3.6.1.4.1.7483.2.2.3.5.2.4.1.12	INTEGER	read-create	The type of fiber that the DCM is provisioned to dispersion-compensate.
tnPowerControlCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.8		not-accessible	A table of Power Control card specific attributes.
tnPowerControlCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.8.1		not-accessible
T/F tnPowerControlCardCapabilityProgrammed	1.3.6.1.4.1.7483.2.2.3.5.2.8.1.1	TruthValue	read-create	The Power Control card programmed capability.
T/F tnPowerControlCardCapabilityPresent	1.3.6.1.4.1.7483.2.2.3.5.2.8.1.2	TruthValue	read-only	The Power Control card capability present.
T/F tnPowerControlCardCapabilityInUse	1.3.6.1.4.1.7483.2.2.3.5.2.8.1.3	TruthValue	read-only	Indicates if the Power Control card capability is in use by the system for services.
tnWssCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.9		not-accessible	A table of WSS card specific attributes.
tnWssCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.9.1		not-accessible
I32 tnWssCardAddPathTargetPower	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.1	Integer32	read-create	The desired power at the output of the amplet inside the WSS. Current configurable range: -1000 to 1000.
I32 tnWssCardAddPathEgressPower	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.2	Integer32	read-create	The desired output power for add services as they come out the WDM port. Current configurable range: -3500 to 1100.
U32 tnWssCardAddPathTotalChannel	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.3	Unsigned32	read-create	The maximum number of channels supported on the add path. Current configurable ranges: CWR8: 8 to 44 CWR8-88: 8 to 88.
U32 tnWssCardReservedDegree	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.4	Unsigned32	read-create	The reserved degree. Current configurable ranges: CWR8: 1 to 8 CWR8-88: 1 to 8 WR2: 1 to 2 -- pre-R5.1 WR2-88: 1 to 2 -- R5.1 WR8-88A: 1 to 8.
INT tnWssCardLnsEnable	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.5	INTEGER	read-create	The flag to turn on/off the LNS laser.
I32 tnWssCardLnsPower	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.6	Integer32	read-only	The output power of the LNS laser. Current range: -9900 to 1000.
U32 tnWssCardAdBlockLevelAdd	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.9	Unsigned32	read-create	Current configurable values: CWR8-88: 0, 3. WR8-88A: 0, 1, 2. WR20-TF: 0.
U32 tnWssCardAdBlockLevelDrop	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.10	Unsigned32	read-create	Current configurable values: CWR8-88: 0, 3. WR8-88A: 0, 1, 2. WR20-TF: 0.
I32 tnWssCardGranularityMHz	1.3.6.1.4.1.7483.2.2.3.5.2.9.1.11	Integer32	read-only	Indicates the granularity (minimum slice size multiple) of the card Wavelength Selective Switch(es). If tnFlexgridOtsInfoLineWssIsFlexgrid is true, the upper frequency edge of a slice aligns with reference 193.1 THz for n=0 (ITU G.694.1). If tnFlexgridOtsInfoLineWssIsFlexgrid is false, the granularity is the channel slot width centered on the regular ITU grid implied by the granularity. Values in MHz. Should be displayed in user interfaces in GHz. Defval: CWR8 = 100000 CWR8-88 = 50000 WR2-88 = 50000 WR8-88A = 50000 WR8-88AF = 12500 WR20-TF = 6250 WR20-TFM = 6250 WR20TFML = 6250 IROADM = 50000
tnSfdCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.10		not-accessible	A table of SFD card specific attributes.
tnSfdCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.10.1		not-accessible
STR tnSfdCardAverageMuxInsertionLoss	1.3.6.1.4.1.7483.2.2.3.5.2.10.1.1	SnmpAdminString	read-only
STR tnSfdCardAverageDemuxInsertionLoss	1.3.6.1.4.1.7483.2.2.3.5.2.10.1.2	SnmpAdminString	read-only
tnSonetSdhPpSectionCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.11		not-accessible	SONET/SDH PP Section resource allocation.
tnSonetSdhPpSectionCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.11.1		not-accessible
U32 tnSonetSdhPpSection1Port	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.1	Unsigned32	read-only
U32 tnSonetSdhPpSection2Port	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.2	Unsigned32	read-only
U32 tnSonetSdhPpSection3Port	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.3	Unsigned32	read-only
U32 tnSonetSdhPpSection4Port	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.4	Unsigned32	read-only
U32 tnSonetSdhPpSection5Port	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.5	Unsigned32	read-only
U32 tnSonetSdhPpSection6Port	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.6	Unsigned32	read-only
U32 tnSonetSdhPpSection7Port	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.7	Unsigned32	read-only
U32 tnSonetSdhPpSection8Port	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.8	Unsigned32	read-only
ALU tnSonetSdhPpSection1IfType	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.9	AluWdmSonetSdhPpSectionIfType	read-only
ALU tnSonetSdhPpSection2IfType	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.10	AluWdmSonetSdhPpSectionIfType	read-only
ALU tnSonetSdhPpSection3IfType	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.11	AluWdmSonetSdhPpSectionIfType	read-only
ALU tnSonetSdhPpSection4IfType	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.12	AluWdmSonetSdhPpSectionIfType	read-only
ALU tnSonetSdhPpSection5IfType	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.13	AluWdmSonetSdhPpSectionIfType	read-only
ALU tnSonetSdhPpSection6IfType	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.14	AluWdmSonetSdhPpSectionIfType	read-only
ALU tnSonetSdhPpSection7IfType	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.15	AluWdmSonetSdhPpSectionIfType	read-only
ALU tnSonetSdhPpSection8IfType	1.3.6.1.4.1.7483.2.2.3.5.2.11.1.16	AluWdmSonetSdhPpSectionIfType	read-only
tnPcsSectionCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.12		not-accessible	PCS Section resource allocation.
tnPcsSectionCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.12.1		not-accessible
U32 tnPcsSection1Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.1	Unsigned32	read-only
U32 tnPcsSection2Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.2	Unsigned32	read-only
U32 tnPcsSection3Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.3	Unsigned32	read-only
U32 tnPcsSection4Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.4	Unsigned32	read-only
U32 tnPcsSection5Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.5	Unsigned32	read-only
U32 tnPcsSection6Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.6	Unsigned32	read-only
U32 tnPcsSection7Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.7	Unsigned32	read-only
U32 tnPcsSection8Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.8	Unsigned32	read-only
U32 tnPcsSection9Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.9	Unsigned32	read-only
U32 tnPcsSection10Port	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.10	Unsigned32	read-only
ALU tnPcsSection1IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.11	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection2IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.12	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection3IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.13	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection4IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.14	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection5IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.15	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection6IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.16	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection7IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.17	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection8IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.18	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection9IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.19	AluWdmPcsSectionIfType	read-only
ALU tnPcsSection10IfType	1.3.6.1.4.1.7483.2.2.3.5.2.12.1.20	AluWdmPcsSectionIfType	read-only
tn11dpge12CardTable	1.3.6.1.4.1.7483.2.2.3.5.2.14		not-accessible	A table of 11dpge12 card specific attributes.
tn11dpge12CardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.14.1		not-accessible
INT tn11dpge12CardRateMode	1.3.6.1.4.1.7483.2.2.3.5.2.14.1.1	INTEGER	read-create	The card rate mode for 11DPGE12.
U32 tn11dpge12QINQModeTPID	1.3.6.1.4.1.7483.2.2.3.5.2.14.1.2	Unsigned32	read-create	The Q in Q Mode TPID for 11DPGE12. Current configurable range: 0x00 to 0xFFFF.
tnSfcCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.15		not-accessible	A table of SFC card specific attributes.
tnSfcCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.15.1		not-accessible
INT tnSfcCardFiberMode	1.3.6.1.4.1.7483.2.2.3.5.2.15.1.1	INTEGER	read-create	Fiber Mode for SFC cards.
tn4dpa4CardTable	1.3.6.1.4.1.7483.2.2.3.5.2.16		not-accessible	A table of 4DPA4 card specific attributes.
tn4dpa4CardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.16.1		not-accessible
INT tn4dpa4CardFunctionMode	1.3.6.1.4.1.7483.2.2.3.5.2.16.1.1	INTEGER	read-create	This attribute determines the card firmware image type, and therefore affects many aspects of card and port behavior. When this attribute is changed card will be cold reset to update the firmware image.
tnOpsaCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.17		not-accessible	A table of OPSA card specific attributes.
tnOpsaCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.17.1		not-accessible
INT tnOpsaProtectionMode	1.3.6.1.4.1.7483.2.2.3.5.2.17.1.1	INTEGER	read-create	This attribute determines the protection mode.
tn11dpe12eCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.18		not-accessible	A table of 11DPE12E card specific attributes.
tn11dpe12eCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.18.1		not-accessible
INT tn11dpe12eCardRateMode	1.3.6.1.4.1.7483.2.2.3.5.2.18.1.1	INTEGER	read-create	The card rate mode for 11DPE12E.
U32 tn11dpe12eQINQModeTPID1	1.3.6.1.4.1.7483.2.2.3.5.2.18.1.2	Unsigned32	read-create	The Q in Q Mode TPID1 for 11DPE12E. Current configurable range: 0x00 to 0xFFFF.
U32 tn11dpe12eQINQModeTPID2	1.3.6.1.4.1.7483.2.2.3.5.2.18.1.3	Unsigned32	read-create	The Q in Q Mode TPID2 for 11DPE12E. Current configurable range: 0x00 to 0xFFFF.
U32 tn11dpe12eQINQModeTPID3	1.3.6.1.4.1.7483.2.2.3.5.2.18.1.4	Unsigned32	read-create	The Q in Q Mode TPID3 for 11DPE12E. Current configurable range: 0x00 to 0xFFFF.
U32 tn11dpe12eQINQModeTPID4	1.3.6.1.4.1.7483.2.2.3.5.2.18.1.5	Unsigned32	read-create	The Q in Q Mode TPID4 for 11DPE12E. Current configurable range: 0x00 to 0xFFFF.
INT tn11dpe12eQINQModeFlowCm	1.3.6.1.4.1.7483.2.2.3.5.2.18.1.6	INTEGER	read-create	The flow control mode for 11DPE12E.
tn1dpp24mCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.19		not-accessible	A table of 1DPP24M card specific attributes.
tn1dpp24mCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.19.1		not-accessible
INT tn1dpp24mCardFunctionMode	1.3.6.1.4.1.7483.2.2.3.5.2.19.1.1	INTEGER	read-create	1DPP24M with master mode provides 21 E1 client access and one line port (STM-1/OC-3). The master card line port maps up to a maximum of 42 E1 (21 E1 from slave card and 21 E1 from master card) into one STM-1/OC-3. Clock recovered from master pack's line port will be used as the clock source and it will also be distributed to the slave pack through the back plane. 1DPP24M with slave mode provides only 21 E1 client access (line port is not in use), connecting with the master card in the ESSI serial bus through the backplane. Timing recovery is from the master card's L1 port.
INT tn1dpp24mCardImpedance	1.3.6.1.4.1.7483.2.2.3.5.2.19.1.2	INTEGER	read-create	Nominal impedance of E1 interfaces. Valid values are: -75ohm -120ohm.
tn43sca1CardTable	1.3.6.1.4.1.7483.2.2.3.5.2.20		not-accessible	A table of 43SCA1 card specific attributes.
tn43sca1CardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.20.1		not-accessible
INT tn43sca1CardFunctionMode	1.3.6.1.4.1.7483.2.2.3.5.2.20.1.1	INTEGER	read-create	This attribute determines the feature type of the 43SCA1 main firmware image. It affects many fundamental aspects of card and port behavior, including which client signal types are supported.
tnOpsCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.21		not-accessible	A table of OPS optical card specific attributes.
tnOpsCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.21.1		not-accessible
INT tnOpsCardProtectionMode	1.3.6.1.4.1.7483.2.2.3.5.2.21.1.1	INTEGER	read-create	This attribute determines the protection mode. Defaults: OPSA: ochp OPSB: otup.
tn11dpe12aCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.22		not-accessible	A table of 11DPE12A card specific attributes.
tn11dpe12aCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.22.1		not-accessible
INT tn11dpe12aCardRateMode	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.1	INTEGER	read-create	The card rate mode for 11dpe12a.
U32 tn11dpe12aCardQINQModeTPID1	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.2	Unsigned32	read-create	The Q in Q Mode TPID1 for 11dpe12a. Current configurable range: 0x00 to 0xFFFF.
U32 tn11dpe12aCardQINQModeTPID2	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.3	Unsigned32	read-create	The Q in Q Mode TPID2 for 11dpe12a. Current configurable range: 0x00 to 0xFFFF.
U32 tn11dpe12aCardQINQModeTPID3	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.4	Unsigned32	read-create	The Q in Q Mode TPID3 for 11dpe12a. Current configurable range: 0x00 to 0xFFFF.
U32 tn11dpe12aCardQINQModeTPID4	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.5	Unsigned32	read-create	The Q in Q Mode TPID4 for 11dpe12a. Current configurable range: 0x00 to 0xFFFF.
U32 tn11dpe12aCardLBMInterval	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.6	Unsigned32	read-create	The interval between consequent LBM messages. Current configurable range: 0 and [1000, 1100, ..., 10000] in increment of 100.
U32 tn11dpe12aCardLBRTimeout	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.7	Unsigned32	read-create	LBR timeout. Current configurable range: 1 to 30.
INT tn11dpe12aCardFlowCm	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.8	INTEGER	read-create	The flow control mode for 11DPE12A.
U32 tn11dpe12aCardSLRTimeout	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.9	Unsigned32	read-create	SLR timeout. Current configurable range: 1 to 10.
INT tn11dpe12aCardCrossPackServiceSupported	1.3.6.1.4.1.7483.2.2.3.5.2.22.1.10	INTEGER	read-create	The cross pack service supported value for 11DPE12A.
tnCardFunctionModeTable	1.3.6.1.4.1.7483.2.2.3.5.2.23		not-accessible	A table of card function mode.
tnCardFunctionModeEntry	1.3.6.1.4.1.7483.2.2.3.5.2.23.1		not-accessible
INT tnCardFunctionMode	1.3.6.1.4.1.7483.2.2.3.5.2.23.1.1	INTEGER	read-create	This attribute determines the card's firmware image type, and therefore affects many aspects of card and port behavior. When this attribute is changed, the card will be cold reset to update the firmware image. The following values are applicable to the cards specified: 4DPA4 - flexMux, dualTran. Default is flexMux. 43SCA1 - sonetSdh, otu3. Default is sonetSdh. 112SCA1 - hundredGbe, otu4. Default is hundredGbe. 112SNA1 - hundredGbe, otu4. Default is hundredGbe.
tn112pdm11CardTable	1.3.6.1.4.1.7483.2.2.3.5.2.24		not-accessible	A table of 112PDM11 card specific attributes.
tn112pdm11CardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.24.1		not-accessible
U32 tn112pdm11CardMaxDMNumbers	1.3.6.1.4.1.7483.2.2.3.5.2.24.1.1	Unsigned32	read-only	The maximum source delay measurement (DM) number that can be supported.
U32 tn112pdm11CardUsedDMNumbers	1.3.6.1.4.1.7483.2.2.3.5.2.24.1.2	Unsigned32	read-only	The used source delay measurement (DM) number.
I32 tnPtpctlCardAttributeTotal	1.3.6.1.4.1.7483.2.2.3.5.2.25	Integer32	read-only
tnPtpctlCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.26		not-accessible	A table of PTPCTL card specific attributes.
tnPtpctlCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.26.1		not-accessible
TRO tnPtpctlCardEqpsLEDColor	1.3.6.1.4.1.7483.2.2.3.5.2.26.1.1	TropicLEDColorType	read-only	The color of the EQPS status LED.
TRO tnPtpctlCardEqpsLEDState	1.3.6.1.4.1.7483.2.2.3.5.2.26.1.2	TropicLEDStateType	read-only	The state of the EQPS status LED.
TRO tnPtpctlCardPtpLEDColor	1.3.6.1.4.1.7483.2.2.3.5.2.26.1.3	TropicLEDColorType	read-only	The color of the PTP time synchronous status LED.
TRO tnPtpctlCardPtpLEDState	1.3.6.1.4.1.7483.2.2.3.5.2.26.1.4	TropicLEDStateType	read-only	The state of the PTP time synchronous status LED.
I32 tnWtocmaCardAttributeTotal	1.3.6.1.4.1.7483.2.2.3.5.2.27	Integer32	read-only
tnWtocmaCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.28		not-accessible	A table of WTOCMA card specific attributes.
tnWtocmaCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.28.1		not-accessible
TNC tnWtocmaCardOsnrScan	1.3.6.1.4.1.7483.2.2.3.5.2.28.1.1	TnCommand	read-create	Start on-demand OSNR scan. When read back, the value of this attribute is noCmd.
TNC tnWtocmaCardOsnrScanAbort	1.3.6.1.4.1.7483.2.2.3.5.2.28.1.2	TnCommand	read-create	Abort on-demand OSNR scan. When read back, the value of this attribute is noCmd.
INT tnWtocmaCardOsnrScanStatus	1.3.6.1.4.1.7483.2.2.3.5.2.28.1.3	INTEGER	read-only	On-demand OSNR scan status.
INT tnWtocmaCardDspState	1.3.6.1.4.1.7483.2.2.3.5.2.28.1.4	INTEGER	read-only	DSP current state.
I32 tnCruCardAttributeTotal	1.3.6.1.4.1.7483.2.2.3.5.2.29	Integer32	read-only
tnCruCardTable	1.3.6.1.4.1.7483.2.2.3.5.2.30		not-accessible	A table of CRU card specific attributes.
tnCruCardEntry	1.3.6.1.4.1.7483.2.2.3.5.2.30.1		not-accessible
INT tnCruCardActivityState	1.3.6.1.4.1.7483.2.2.3.5.2.30.1.1	INTEGER	read-only	CRU card activity states.
TRO tnCruCardEqpsLEDColor	1.3.6.1.4.1.7483.2.2.3.5.2.30.1.2	TropicLEDColorType	read-only	The color of the CRU EQPS status LED.
TRO tnCruCardEqpsLEDState	1.3.6.1.4.1.7483.2.2.3.5.2.30.1.3	TropicLEDStateType	read-only	The state of the CRU EQPS status LED.
I32 tnIroadmCardConfigAttributeTotal	1.3.6.1.4.1.7483.2.2.3.5.2.31	Integer32	read-only	Total number of attributes in tnIroadmCardConfigTable.
tnIroadmCardConfigTable	1.3.6.1.4.1.7483.2.2.3.5.2.32		not-accessible
tnIroadmCardConfigEntry	1.3.6.1.4.1.7483.2.2.3.5.2.32.1		not-accessible
INT tnIroadmCardConfigOptIntDetection	1.3.6.1.4.1.7483.2.2.3.5.2.32.1.1	INTEGER	read-create
I32 tnIroadmCardConfigOptIntBaseline	1.3.6.1.4.1.7483.2.2.3.5.2.32.1.2	Integer32	read-create	Current configurable range: -100, 100 to 5000.
U32 tnIroadmCardConfigOptIntLossThreshold	1.3.6.1.4.1.7483.2.2.3.5.2.32.1.3	Unsigned32	read-create	Current configurable range: 100 to 500.
U32 tnIroadmCardConfigOptIntPollPeriod	1.3.6.1.4.1.7483.2.2.3.5.2.32.1.4	Unsigned32	read-create	Current configurable range: 20 to 120.
TNC tnIroadmCardConfigOptIntClearAlarm	1.3.6.1.4.1.7483.2.2.3.5.2.32.1.5	TnCommand	read-create
I32 tnIroadmCardInfoAttributeTotal	1.3.6.1.4.1.7483.2.2.3.5.2.33	Integer32	read-only	Total no of attributes in tnIroadmCardInfoTable.
tnIroadmCardInfoTable	1.3.6.1.4.1.7483.2.2.3.5.2.34		not-accessible
tnIroadmCardInfoEntry	1.3.6.1.4.1.7483.2.2.3.5.2.34.1		not-accessible
I32 tnIroadmCardInfoIngressOAMPumpTemperature	1.3.6.1.4.1.7483.2.2.3.5.2.34.1.1	Integer32	read-only
I32 tnIroadmCardInfoIngressOAMPumpBias	1.3.6.1.4.1.7483.2.2.3.5.2.34.1.2	Integer32	read-only	Current range: -100, 100 to 5000.
I32 tnIroadmCardInfoEgressOAMPumpTemperature	1.3.6.1.4.1.7483.2.2.3.5.2.34.1.3	Integer32	read-only	Current range: 100 to 500.
I32 tnIroadmCardInfoEgressOAMPumpBias	1.3.6.1.4.1.7483.2.2.3.5.2.34.1.4	Integer32	read-only	Current range: 20 to 120.
U32 tnIroadmCardInfoOptIntSpanLoss	1.3.6.1.4.1.7483.2.2.3.5.2.34.1.5	Unsigned32	read-only	Current range: 0 to 9900.
I32 tnIsonCardModeAttributeTotal	1.3.6.1.4.1.7483.2.2.3.5.2.35	Integer32	read-only	Total no of attributes in tnIsonCardInfoTable.
tnIsonCardModeTable	1.3.6.1.4.1.7483.2.2.3.5.2.36		not-accessible	A table of ISON card mode specific attributes.
tnIsonCardModeEntry	1.3.6.1.4.1.7483.2.2.3.5.2.36.1		not-accessible
INT tnIsonCardModeSelection	1.3.6.1.4.1.7483.2.2.3.5.2.36.1.1	INTEGER	read-create	ISON Card selection mode.

RFC description

Monitors and manages optical card attributes in Nokia WDM network elements. Tracks wavelength-selective switch, DCM cards, and optical port configurations.

Start monitoring Nokia Tropic WDM optical line card / network element (card oper-state/optical-performance status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-OPTICALCARD-MIB

What Is TROPIC-OPTICALCARD-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description