TROPIC-GMPLS-CPIF-MIB

All MIBs › TROPIC-GMPLS-CPIF-MIB

Organization: Nokia

Last Updated: 2013-06-27

Category: Nokia Optical Transport

Description: Manages Nokia Tropic GMPLS control plane interface configuration and status for optical transport.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-GMPLS-CPIF-MIB?

This module manages GMPLS (Generalized Multi-Protocol Label Switching) control plane interfaces on Nokia's Tropic Networks optical transport platform, defining the configuration and status objects for the interfaces that participate in the GMPLS control plane used to signal and provision optical paths. It exposes control-plane interface configuration (e.g., interface enablement, addressing, and role) and operational status data, rather than raw hardware sensor readings. Its monitoring relevance is primarily to control-plane and software health: administrators use it to verify that GMPLS signaling interfaces are up and correctly configured, since a misconfigured or down control-plane interface can prevent automatic optical path provisioning/restoration even if the underlying hardware is healthy. It builds on IETF GMPLS/MPLS standards concepts (as adapted by Tropic for its optical platform) and interoperates with the companion TROPIC-GMPLS-NOTIFICATION-MIB, which reports control-plane events for these interfaces. It is deployed in carrier DWDM/optical transport networks that use GMPLS-based dynamic control planes for automated circuit provisioning and restoration. Engineers can download the TROPIC-GMPLS-CPIF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-GMPLS-CPIF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia (Tropic Networks) DWDM optical transport network element with GMPLS control plane

Monitoring Examples

No concrete sample objects were provided for this module; based on its documented purpose, an operator would typically poll per-interface configuration and operational-status objects for each GMPLS control-plane interface to confirm signaling adjacencies are established, flagging any interface stuck in a down or misconfigured state that would block automated path setup/restoration.

What Can Be Monitored

GMPLS control-plane interface status
control-plane interface configuration/enablement

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv4
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

From TROPIC-GLOBAL-REG

tnGmplsMIBModules	OBJECT-IDENTITY
tnGmplsObjs	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnGmplsCpifMibModule	1.3.6.1.4.1.7483.1.1.2.6.1			GMPLS Control Plane Interface MIB types.
tnGmplsCpifMIB	1.3.6.1.4.1.7483.2.1.10.1.1
tnGmplsCpifObjs	1.3.6.1.4.1.7483.2.1.10.1.1.1
I32 tnGmplsCpifAttributeTotal	1.3.6.1.4.1.7483.2.1.10.1.1.1.1	Integer32	read-only	Total number of attributes in this MIB file.
tnGmplsCPNbrTable	1.3.6.1.4.1.7483.2.1.10.1.1.1.2		not-accessible	The Control Plane Neighbour Table
tnGmplsCPNbrEntry	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1		not-accessible	An entry in this table represents an GMPLS LSP.
U32 tnGmplsCPNbrIfId	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.1	Unsigned32	not-accessible	Interface index, uniquely identifies this row. This Id maps to the GMPLS CLI interface index of the CPNbr.
STR tnGmplsCPNbrIfName	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.2	DisplayString	read-create	User label.
IPt tnGmplsCPNbrAddrType	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.3	InetAddressType	read-create	IPv4 only
IP tnGmplsCPNbrRemoteRouterAddr	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.4	InetAddress	read-create	Neighbor node id
INT tnGmplsCPNbrEncaps	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.5	INTEGER	read-create	Protocol encapsulation.
IP tnGmplsCPNbrRemoteTEP	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.6	InetAddress	read-create	Remote tunnel end point for out of band (LAN i/f address).
IP tnGmplsCPNbrOspfArea	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.7	IpAddress	read-create	Area Id of the DCN to this neighbour.
INT tnGmplsCPNbrAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.8	INTEGER	read-create	Administrative state.
ADR tnGmplsCPNbrRemoteCPNodeId	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.9	InetAddressIPv4	read-create	Remote Control Plane Node Id.
ROW tnGmplsCPNbrRowStatus	1.3.6.1.4.1.7483.2.1.10.1.1.1.2.1.10	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
tnGmplsRsvpIfTable	1.3.6.1.4.1.7483.2.1.10.1.1.1.3		not-accessible	The Resource Reservation Protocol Interface Table.
tnGmplsRsvpIfEntry	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1		not-accessible	An entry in this table represents an GMPLS LSP.
U32 tnGmplsRsvpIfId	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1.1	Unsigned32	not-accessible	Interface index, uniquely identifies this row. This Id maps to the GMPLS CLI interface index of the CPNbr.
STR tnGmplsRsvpIfName	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1.2	DisplayString	read-create	User label.
INT tnGmplsRsvpIfType	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1.3	INTEGER	read-create	IPv4 only.
INT tnGmplsRsvpIfEncaps	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1.4	INTEGER	read-create	Protocol encapsulation.
U32 tnGmplsRsvpIfCPNbr	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1.5	Unsigned32	read-create	Reference to CPNbr table, the CPNbrIfIndex.
INT tnGmplsRsvpIfAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1.6	INTEGER	read-create	Administrative state.
INT tnGmplsRsvpIfOpState	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1.7	INTEGER	read-only	Operational state.
ROW tnGmplsRsvpIfRowStatus	1.3.6.1.4.1.7483.2.1.10.1.1.1.3.1.8	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
tnGmplsDprIfTable	1.3.6.1.4.1.7483.2.1.10.1.1.1.4		not-accessible	The Data Plane Routing Interface Table.
tnGmplsDprIfEntry	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1		not-accessible	An entry in this table represents an GMPLS LSP.
U32 tnGmplsDprIfId	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.1	Unsigned32	not-accessible	Interface index, uniquely identifies this row. This Id maps to the GMPLS CLI interface index of the CPNbr.
STR tnGmplsDprIfName	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.2	DisplayString	read-create	User label.
INT tnGmplsDprIfType	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.3	INTEGER	read-create	IPv4 only.
INT tnGmplsDprIfEncaps	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.4	INTEGER	read-create	Protocol encapsulation.
U32 tnGmplsDprIfCPNbr	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.5	Unsigned32	read-create	Reference to CPNbr table, the CPNbrIfIndex.
INT tnGmplsDprIfAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.6	INTEGER	read-create	Administrative state.
INT tnGmplsDprIfOpState	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.7	INTEGER	read-only	Operational state.
T/F tnGmplsDprIfNVMismatch	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.8	TruthValue	read-only	Network version mismatch state.
ROW tnGmplsDprIfRowStatus	1.3.6.1.4.1.7483.2.1.10.1.1.1.4.1.9	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
tnGmplsLmpIfTable	1.3.6.1.4.1.7483.2.1.10.1.1.1.5		not-accessible	The Link Management Protocol Interface Table.
tnGmplsLmpIfEntry	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1		not-accessible	An entry in this table represents an GMPLS LSP.
U32 tnGmplsLmpIfId	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.1	Unsigned32	not-accessible	Interface index, uniquely identifies this row. This Id maps to the GMPLS CLI interface index of the CPNbr.
STR tnGmplsLmpIfName	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.2	DisplayString	read-create	User label.
U32 tnGmplsLmpIfCPNbr	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.3	Unsigned32	read-create	Reference to CPNbr table, the CPNbrIfIndex.
T/F tnGmplsLmpIfHelloEnabled	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.4	TruthValue	read-create	Hello protocol on/off.
T/F tnGmplsLmpIfLinkPropCorrEnabled	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.5	TruthValue	read-create	LMP Link property correlation on/off.
T/F tnGmplsLmpIfTraceMonEnabled	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.6	TruthValue	read-create	Hello protocol on/off.
T/F tnGmplsLmpIfEndPointDiscEnabled	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.7	TruthValue	read-create	Hello protocol on/off.
INT tnGmplsLmpIfAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.8	INTEGER	read-create	Administrative state.
INT tnGmplsLmpIfOpState	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.9	INTEGER	read-only	Operational state.
ROW tnGmplsLmpIfRowStatus	1.3.6.1.4.1.7483.2.1.10.1.1.1.5.1.10	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
tnGmplsCpifConf	1.3.6.1.4.1.7483.2.1.10.1.1.3
tnGmplsCpifGroups	1.3.6.1.4.1.7483.2.1.10.1.1.3.1
tnGmplsCpifObjsGroup	1.3.6.1.4.1.7483.2.1.10.1.1.3.1.1
tnGmplsCPNbrGroup	1.3.6.1.4.1.7483.2.1.10.1.1.3.1.2			The GMPLS control plane neighbour group of objects providing for management of GMPLS NE entities.
tnGmplsRsvpGroup	1.3.6.1.4.1.7483.2.1.10.1.1.3.1.3			The GMPLS control plane rsvp group of objects providing for management of GMPLS NE entities.
tnGmplsDprGroup	1.3.6.1.4.1.7483.2.1.10.1.1.3.1.4			The GMPLS datplane plane routing group of objects providing for management of GMPLS NE entities.
tnGmplsLmpGroup	1.3.6.1.4.1.7483.2.1.10.1.1.3.1.5			The GMPLS control plane LMP group of objects providing for management of GMPLS NE entities.
tnGmplsCpifCompliances	1.3.6.1.4.1.7483.2.1.10.1.1.3.2
tnGmplsCpifCompliance	1.3.6.1.4.1.7483.2.1.10.1.1.3.2.1			The compliance statement for SNMPv2 entities which implement GMPLS NE.

RFC description

Manages GMPLS control plane interface configuration and neighbor relationships on Nokia optical transport networks.

Start monitoring Nokia (Tropic Networks) DWDM optical transport network element with GMPLS control plane (control-plane interface admin/oper status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-GMPLS-CPIF-MIB

What Is TROPIC-GMPLS-CPIF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description