TROPIC-GMPLS-DPIF-MIB

All MIBs › TROPIC-GMPLS-DPIF-MIB

Organization: Nokia

Last Updated: 2013-06-27

Category: Nokia Optical Transport

Description: Manages Nokia Tropic GMPLS data plane interface objects for optical transport network provisioning.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TROPIC-GMPLS-DPIF-MIB?

TROPIC-GMPLS-DPIF-MIB is a vendor MIB associated with Nokia's Tropic optical transport platform, defining the type/textual-convention layer for GMPLS (Generalized Multiprotocol Label Switching) Data Plane Interface objects used in optical/transport network provisioning. Because no sample objects were extracted from this module, its scope appears limited to type definitions (TEXTUAL-CONVENTIONs) rather than a full set of runtime tables, with the actual data-plane interface objects likely defined in a companion GMPLS MIB that imports these types. Its monitoring relevance would be indirect, supplying shared data types for GMPLS data-plane interface state (such as label or interface identifiers) rather than exposing pollable hardware/software status objects itself. It is explicitly dependent on the broader GMPLS/MPLS-TE standards framework and on Nokia's Tropic platform MIB suite that consumes these type definitions. It would be deployed as a supporting module alongside Nokia Tropic optical transport network elements using GMPLS-based provisioning. Engineers can download the TROPIC-GMPLS-DPIF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TROPIC-GMPLS-DPIF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia Tropic optical transport network element

Monitoring Examples

No sample objects were provided for this module, and its description indicates it defines shared GMPLS data-plane interface types rather than runtime tables, so a concrete monitoring scenario cannot be described; the actual pollable objects would reside in a companion Tropic GMPLS MIB that imports these type definitions.

Imported Objects

From INET-ADDRESS-MIB

InetAddressIPv4

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

From TROPIC-GLOBAL-REG

tnGmplsMIBModules	OBJECT-IDENTITY
tnGmplsObjs	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnGmplsDpifMibModule	1.3.6.1.4.1.7483.1.1.2.6.2			GMPLS Data Plane Interface MIB types.
tnGmplsDpifMIB	1.3.6.1.4.1.7483.2.1.10.1.2
tnGmplsDpifObjs	1.3.6.1.4.1.7483.2.1.10.1.2.1
I32 tnGmplsDpifAttributeTotal	1.3.6.1.4.1.7483.2.1.10.1.2.1.1	Integer32	read-only	Total number of attributes in this MIB file.
tnGmplsDBLinkTable	1.3.6.1.4.1.7483.2.1.10.1.2.1.2		not-accessible	The GMPLS DataBearer Link Table.
tnGmplsDBLinkEntry	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1		not-accessible	An entry in this table represents an GMPLS Label Switched Path (LSP).
U32 tnGmplsDBLinkIfId	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.1	Unsigned32	not-accessible	Interface Id of the databearer. Refers to the supporting facility of the NE. The format is rrsbbppcc with the following meaning: rr = 2 digits rack s = 1 digit subrack bb = 2 digits board/slot pp = 2 digits port cc = 2 digits channel, default 01.
U32 tnGmplsDBLinkRemoteIfId	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.2	Unsigned32	read-create	Interface Id of the databearer of the remote side.
STR tnGmplsDBLinkName	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.3	DisplayString	read-create	User friendly name
INT tnGmplsDBLinkType	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.4	INTEGER	read-create	Link type.
U32 tnGmplsDBLinkTEId	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.5	Unsigned32	read-create	Reference to the TE link in the TE Link table.
INT tnGmplsDBLinkACD	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.6	INTEGER	read-create	Access Control Domain for resource assignment to control plane or management plane.
T/F tnGmplsDBLinkUseInFiber	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.7	TruthValue	read-create	Allow configuration of InBand communication channels.
U32 tnGmplsDBLinkWTR	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.8	Unsigned32	read-create	Wait to revert time in seconds.
INT tnGmplsDBLinkAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.9	INTEGER	read-create	Administrative state.
INT tnGmplsDBLinkOperationalState	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.10	INTEGER	read-only	Administrative state.
INT tnGmplsDBLinkMaintState	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.11	INTEGER	read-create	Maintenance state.
INT tnGmplsDBLinkAlarmState	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.12	INTEGER	read-only	Current active alarm state. If multiple alarms are active the first alarm is shown.
U32 tnGmplsDBLink3RIndex	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.13	Unsigned32	read-only	Index, reference to the 3R link.
ROW tnGmplsDBLinkRowStatus	1.3.6.1.4.1.7483.2.1.10.1.2.1.2.1.14	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table. Supported values for this table are: active => to activate new data link config notInService => configuration not active notReady => mandatory parameters missing destroy => delete data link createAndGo => create and activate new datalink entry. CreateAndWait of row entries is not allowed.
tnGmplsTELinkTable	1.3.6.1.4.1.7483.2.1.10.1.2.1.3		not-accessible	The GMPLS Traffic Engineering Link Table.
tnGmplsTELinkEntry	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1		not-accessible	An entry in this table represents an GMPLS Label Switched Path (LSP).
U32 tnGmplsTELinkIfId	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.1	Unsigned32	not-accessible	Interface Id of the TElink. Refers to the supporting facility of the NE.
U32 tnGmplsTELinkRemoteIfId	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.2	Unsigned32	read-create	Interface Id of the telink on the remote side.
U32 tnGmplsTELinkRemoteSubnodeId	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.3	Unsigned32	read-create	Remote Data plane node Id
ADR tnGmplsTELinkRemoteCPNodeId	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.4	InetAddressIPv4	read-create	Node Id of the remote side.
ADR tnGmplsTELinkTNA	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.5	InetAddressIPv4	read-create	TNA address in IPv4.
STR tnGmplsTELinkName	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.6	DisplayString	read-create	User friendly name
U32 tnGmplsTELinkMetric	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.7	Unsigned32	read-create	TE Metric.
U32 tnGmplsTELinkColor	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.8	Unsigned32	read-create	Resource color attribute. The bits 29..32 are reserved for GMPLS internal use.
STR tnGmplsTELinkSRLG	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.9	DisplayString	read-create	List of SRLG values separated by ','.
U32 tnGmplsTELinkLatency	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.10	Unsigned32	read-create	Latency attribute.
INT tnGmplsTELinkAdminStatus	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.11	INTEGER	read-create	Administrative state.
INT tnGmplsTELinkOperationalState	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.12	INTEGER	read-only	Administrative state.
INT tnGmplsTELinkMaintState	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.13	INTEGER	read-create	Maintenance state.
INT tnGmplsTELinkAlarmState	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.14	INTEGER	read-only	Current active alarm state. If multiple alarms are active the first one is displayed.
ROW tnGmplsTELinkRowStatus	1.3.6.1.4.1.7483.2.1.10.1.2.1.3.1.15	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table. Supported values for this table are: active => activate new TE link config notInService => configuration not active notReady => mandatory parameters missing destroy => delete TE link createAndGo => create and activate new TE link entry CreateAndWait of row entries is not allowed.
tnGmplsDpifConf	1.3.6.1.4.1.7483.2.1.10.1.2.3
tnGmplsDpifGroups	1.3.6.1.4.1.7483.2.1.10.1.2.3.1
tnGmplsDpifObjsGroup	1.3.6.1.4.1.7483.2.1.10.1.2.3.1.1
tnGmplsDBLinkGroup	1.3.6.1.4.1.7483.2.1.10.1.2.3.1.2			The GMPLS datalink group of objects providing for management of GMPLS NE entities.
tnGmplsTELinkGroup	1.3.6.1.4.1.7483.2.1.10.1.2.3.1.3			The GMPLS dataplane TE link interface group of objects providing for management of GMPLS TE entities.
tnGmplsDpifCompliances	1.3.6.1.4.1.7483.2.1.10.1.2.3.2
tnGmplsDpifCompliance	1.3.6.1.4.1.7483.2.1.10.1.2.3.2.1			The compliance statement for SNMPv2 entities which implement GMPLS NE.

RFC description

GMPLS Data Plane Interface MIB for Nokia providing label switched path and data bearer link management.

Start monitoring Nokia Tropic optical transport network element (GMPLS data-plane interface textual conventions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TROPIC-GMPLS-DPIF-MIB

What Is TROPIC-GMPLS-DPIF-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description