All MIBs › TELDAT-WEBPROBE-MIB
Category: Teldat Router Management
Description: Monitors Teldat router web probe active HTTP/HTTPS measurements, response times, and availability status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TELDAT-WEBPROBE-MIB?
TELDAT-WEBPROBE-MIB is a Teldat enterprise MIB module used to configure and report on active HTTP/HTTPS synthetic monitoring probes run from a Teldat router. It exposes configuration objects for defining target URLs and probe schedules alongside result data such as response times and reachability/availability status. Its core monitoring value is service-level health checking: it lets an administrator confirm that a remote web service is reachable and measure its responsiveness directly from the router's vantage point, effectively using the device as an active-monitoring probe rather than just reporting on its own hardware. It is a self-contained enterprise extension without strong dependency on other standard MIBs beyond the base Teldat enterprise structure. It is typically deployed on Teldat routers at branch or edge sites to continuously verify connectivity and latency to critical web-based services or SD-WAN controllers. Engineers can download the TELDAT-WEBPROBE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-WEBPROBE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Teldat router (active web-probe capable models)
Monitoring Examples
An admin would configure a web probe target and poll its results table for the measured HTTP/HTTPS response time and current availability status, alerting when a probe transitions from reachable to unreachable or when response time exceeds a threshold. This provides early warning of a failing upstream service or degraded WAN path even before generic interface counters show a problem. No sample object names were available in the source excerpt, so table/column names are inferred from the module's stated purpose.
What Can Be Monitored
- HTTP/HTTPS response time
- probe reachability/availability status
- probe target configuration
- probe schedule/interval
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter |
From RFC1213-MIB
| DisplayString |
From TELDAT-MIB
| telproducts | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| telProductsWebProbe | 1.3.6.1.4.1.2007.4.58 | |||
| telProductsWebProbeConfig | 1.3.6.1.4.1.2007.4.58.1 | |||
| telProductsWebProbeMonit | 1.3.6.1.4.1.2007.4.58.2 | |||
| INT telProdWebProbeCfgProbePageType | 1.3.6.1.4.1.2007.4.58.1.1.1.11 | INTEGER | read-write | The value of this variable indicates if the page to download is generic(1) or specific(2). If the page is generic, the content of the response is not parsed. If the page is specific, the probe expects an specific structure in the response |
| INT telProdWebProbeCfgProbeTimeout | 1.3.6.1.4.1.2007.4.58.1.1.1.10 | INTEGER | read-write | Timeout configured for this probe. |
| INT telProdWebProbeConfMaxRedir | 1.3.6.1.4.1.2007.4.58.1.6 | INTEGER | read-write | Configures the maximum number of redirections allowed in the HTTP requests |
| INT telProdWebProbeConfProbeDelete | 1.3.6.1.4.1.2007.4.58.1.1.1.9 | INTEGER | read-write | If the value of this variable is set to 1, this entry will be deleted. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the entry was deleted succesfully; error (3), if the operation failed; the value undefined (4) indicates that delete operations have not been made yet. |
| INT telProdWebProbeConfProbeEnable | 1.3.6.1.4.1.2007.4.58.1.1.1.3 | INTEGER | read-write | The value of this variable indicates if the probe is enabled or disabled, and a SET operation allows to enable/disable the probe whose identifier is specified in the index. This variable can take the values enabled (1) or disabled (2). |
| telProdWebProbeConfProbeEntry | 1.3.6.1.4.1.2007.4.58.1.1.1 | not-accessible | Each entry refers to a probe, and consists of the various essential parameters for it: the probe identifier, the address of the page where the probe must be initially connected in order to initiate the speed measuring process, the type of periodicity and the value of the period the probe boots with, the minimum access speed value below which the measurement is taken into account in order to generate an SNMP event (TRAP) 'Threshold not reached', the number of consecutive measurements that must be produced with the speed below the configured threshold so this SNMP TRAP is generated, a variable to indicate if the SNMP TRAP 'Threshold not reached' is enabled, a variable to delete the probe, another variable to indicate the timeout configured for this probe and the kind of page to request. To add or configure a new probe is enough to use the following index to the last existing probe identifier in the corresponding SET operation, but there is a maximum number of configured probes that must be respected. | |
| INT telProdWebProbeConfProbeEvent | 1.3.6.1.4.1.2007.4.58.1.1.1.8 | INTEGER | read-write | The value of this variable indicates if the 'Threshold not reached' TRAP generation is enabled or disabled, and a SET operation allows to enable/disable the sending of this SNMP event for this probe. This variable can take the values enabled (1) or disabled (2). |
| INT telProdWebProbeConfProbeIndex | 1.3.6.1.4.1.2007.4.58.1.1.1.1 | INTEGER | read-only | Index of the table: probe identifier. |
| INT telProdWebProbeConfProbeNPolls | 1.3.6.1.4.1.2007.4.58.1.1.1.7 | INTEGER | read-write | Number of consecutive measurements that must be produced with the speed below the configured threshold so an SNMP event (TRAP) 'Threshold not reached'. A measurement received above the threshold will restart the counter. |
| INT telProdWebProbeConfProbePeriodType | 1.3.6.1.4.1.2007.4.58.1.1.1.4 | INTEGER | read-write | This variable indicates the type of periodicity: (0) none, (1) minutes, (2) hours, (3) days, (4) months. The value 0 (none) indicates that the probe is not periodic. This is equivalent to disabling the probe. When the device boots, the probe boots with periodicity configured through this variable and the next (value of the period). |
| INT telProdWebProbeConfProbePeriodValue | 1.3.6.1.4.1.2007.4.58.1.1.1.5 | INTEGER | read-write | This variable indicates the value of the period, in minutes, hours, days or months depending on the type of periodicity configured, which is stored in the previous variable. When the device boots, the probe boots with periodicity configured through this variable and the previous (type of periodicity). If the type of periodicity is none (0), the value of this variable has no sense: in GET operations it will be shown as 0 and SET operations are no allowed. |
| telProdWebProbeConfProbeTable | 1.3.6.1.4.1.2007.4.58.1.1 | not-accessible | This table contains all the configured Web probes. Each entry refers to a probe, and consists of the various essential parameters for it: the probe identifier, the address of the page where the probe must be initially connected in order to initiate the speed measuring process, the type of periodicity and the value of the period the probe boots with, the minimum access speed value below which the measurement is taken into account in order to generate an SNMP event (TRAP) 'Threshold not reached', the number of consecutive measurements that must be produced with the speed below the configured threshold so this SNMP TRAP is generated, a variable to indicate if the SNMP TRAP 'Threshold not reached' is enabled, a variable to delete the probe, another variable to indicate the timeout configured for this probe and the kind of page to request. To add or configure a new probe is enough to use the following index to the last existing probe identifier in the corresponding SET operation. | |
| INT telProdWebProbeConfProbeThreshold | 1.3.6.1.4.1.2007.4.58.1.1.1.6 | INTEGER | read-write | Minimum access speed value (in bits per second) below which the measurement is taken into account in order to generate an SNMP event (TRAP) 'Threshold not reached'. |
| STR telProdWebProbeConfProbeUrl | 1.3.6.1.4.1.2007.4.58.1.1.1.2 | DisplayString | read-write | The address of the Web page where the probe must be initially connected in order to initiate the speed measuring process. |
| INT telProdWebProbeConfTCPmss | 1.3.6.1.4.1.2007.4.58.1.5 | INTEGER | read-write | Configures the TCP Maximum Segment Size(MSS) used in the HTTP connections |
| INT telProdWebProbeConfTCPwindow | 1.3.6.1.4.1.2007.4.58.1.4 | INTEGER | read-write | Configures the TCP window size used in the HTTP connections |
| INT telProdWebProbeConfTTrap | 1.3.6.1.4.1.2007.4.58.1.3 | INTEGER | read-write | Configures, in seconds, the periodicity of the PPP connection trap |
| INT telProdWebProbeConfUpdate | 1.3.6.1.4.1.2007.4.58.1.2 | INTEGER | read-write | If the value of this variable is set to 1, the configuration changes made since the system was last re-initialized will take effect. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if it was made succesfully; error (3), if the operation failed; the value undefined (4) indicates that operations of this type have not been made yet. |
| CTR telProdWebProbeMonPPPErrStatsAuthLocal | 1.3.6.1.4.1.2007.4.58.2.4.1.6 | Counter | read-only | Number of local authentication errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsAuthNotSupp | 1.3.6.1.4.1.2007.4.58.2.4.1.8 | Counter | read-only | Number of authentication not supported errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsAuthRemote | 1.3.6.1.4.1.2007.4.58.2.4.1.7 | Counter | read-only | Number of remote authentication errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsBcpLocal | 1.3.6.1.4.1.2007.4.58.2.4.1.14 | Counter | read-only | Number of local BCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsBcpRemote | 1.3.6.1.4.1.2007.4.58.2.4.1.13 | Counter | read-only | Number of remote BCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsCcpLocal | 1.3.6.1.4.1.2007.4.58.2.4.1.10 | Counter | read-only | Number of local CCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsCcpRemote | 1.3.6.1.4.1.2007.4.58.2.4.1.9 | Counter | read-only | Number of remote CCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| telProdWebProbeMonPPPErrStatsEntry | 1.3.6.1.4.1.2007.4.58.2.4.1 | not-accessible | Each entry refers to one of the the possible PPP connections or one of the configured PPP interfaces, and consists of the following parameters: the number of the PPP interface, which is the index of the table, and a serie of parameters which refer to different errors that caused the failure to establish the PPP connection. These parameters are: the number of remote LCP errors, the number of local LCP errors, the number of remote IPCP errors, the number of local IPCP errors, the number of local authentication failures, the number of remote authentication failures, the number of not supported authentication errors, the number of remote CCP errors, the number of local CCP errors, the number of PADO timeouts in PPPoE connections, the number of PADS timeouts in PPPoE connections, the number of local BCP errors and the number of remote BCP errors. | |
| INT telProdWebProbeMonPPPErrStatsIndex | 1.3.6.1.4.1.2007.4.58.2.4.1.1 | INTEGER | read-only | Index of the table: number of the PPP interface. |
| CTR telProdWebProbeMonPPPErrStatsIpcpLocal | 1.3.6.1.4.1.2007.4.58.2.4.1.5 | Counter | read-only | Number of local IPCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsIpcpRemote | 1.3.6.1.4.1.2007.4.58.2.4.1.4 | Counter | read-only | Number of remote IPCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsLcpLocal | 1.3.6.1.4.1.2007.4.58.2.4.1.3 | Counter | read-only | Number of local LCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsLcpRemote | 1.3.6.1.4.1.2007.4.58.2.4.1.2 | Counter | read-only | Number of remote LCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsPPPoENoPados | 1.3.6.1.4.1.2007.4.58.2.4.1.11 | Counter | read-only | Number of PPPoE PADO timeout errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| CTR telProdWebProbeMonPPPErrStatsPPPoENoPadss | 1.3.6.1.4.1.2007.4.58.2.4.1.12 | Counter | read-only | Number of PPPoE PADO timeout errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| telProdWebProbeMonPPPErrStatsTable | 1.3.6.1.4.1.2007.4.58.2.4 | not-accessible | This table stores the conection errors statistics of every PPP connection configured. | |
| INT telProdWebProbeMonProbeChanUpdated | 1.3.6.1.4.1.2007.4.58.2.1.1.17 | INTEGER | read-only | The value of this variable indicates if the configuration changes have been updated. If no changes have produced, this variable will take the value 0 (no-changes); elsewhere, it would take the values waiting-for-update (1) or not-updated (2). |
| INT telProdWebProbeMonProbeConfChanges | 1.3.6.1.4.1.2007.4.58.2.1.1.18 | INTEGER | read-only | This variable indicates the changes made in configuration which have not been updated yet. The allowed values (possible changes) are: none(0), enabled-disabled(1), url(2), url-enabled-disabled(3), period(4), period-enabled-disabled(5), period-url(6), period-url-enabled-disabled(7), threshold(8), threshold-enabled-disabled(9), threshold-url(10), threshold-url-enabled-disabled(11), threshold-period(12), threshold-period-enabled-disabled(13), threshold-period-url(14), threshold-period-url-enabled-disabled(15), npolls(16), npolls-enabled-disabled(17), npolls-url(18), npolls-url-enabled-disabled(19), npolls-period(20), npolls-period-enabled-disabled(21), npolls-period-url(22), npolls-period-url-enabled-disabled(23), npolls-threshold(24), npolls-threshold-enabled-disabled(25), npolls-threshold-url(26), npolls-threshold-url-enabled-disabled(27), npolls-threshold-period(28), npolls-threshold-period-enabled-disabled(29), npolls-threshold-period-url(30), npolls-threshold-period-url-enabled-disabled(31), event(32), event-enable-disable(33), event-url(34), event-url-enable-disable(35), event-period(36), event-period-enable-disable(37), event-period-url(38), event-period-url-enable-disable(39), event-threshold(40), event-threshold-enable-disable(41), event-threshold-url(42), event-threshold-url-enable-disable(43), event-threshold-period(44), event-threshold-period-enable-disable(45), event-threshold-period-url(46), event-threshold-period-url-enable-disable(47), event-npolls(48), event-npolls-enable-disable(49), event-npolls-url(50), event-npolls-url-enable-disable(51), event-npolls-period(52), event-npolls-period-enable-disable(53), event-npolls-period-url(54), event-npolls-period-url-enable-disable(55), event-npolls-threshold(56), event-npolls-threshold-enable-disable(57), event-npolls-threshold-url(58), event-npolls-threshold-url-enable-disable(59), event-npolls-threshold-period(60), event-npolls-threshold-period-enable-disable(61), event-npolls-threshold-period-url(62), event-npolls-threshold-period-url-enable-disable(63), deleted-probe(64), timeout(128), timeout-enabled-disabled(129), timeout-url(130), timeout-url-enabled-disabled(131), timeout-period(132), timeout-period-enabled-disabled(133), timeout-period-url(134), timeout-period-url-enabled-disabled(135), timeout-threshold(136), timeout-threshold-enabled-disabled(137), timeout-threshold-url(138), timeout-threshold-url-enabled-disabled(139), timeout-threshold-period(140), timeout-threshold-period-enabled-disabled(141), timeout-threshold-period-url(142), timeout-threshold-period-url-enabled-disabled(143), timeout-npolls(144), timeout-npolls-enabled-disabled(145), timeout-npolls-url(146), timeout-npolls-url-enabled-disabled(147), timeout-npolls-period(148), timeout-npolls-period-enabled-disabled(149), timeout-npolls-period-url(150), timeout-npolls-period-url-enabled-disabled(151), timeout-npolls-threshold(152), timeout-npolls-threshold-enabled-disabled(153), timeout-npolls-threshold-url(154), timeout-npolls-threshold-url-enabled-disabled(155), timeout-npolls-threshold-period(156), timeout-npolls-threshold-period-enabled-disabled(157), timeout-npolls-threshold-period-url(158), timeout-npolls-threshold-period-url-enabled-disabled(159), timeout-event(160), timeout-event-enable-disable(161), timeout-event-url(162), timeout-event-url-enable-disable(163), timeout-event-period(164), timeout-event-period-enable-disable(165), timeout-event-period-url(166), timeout-event-period-url-enable-disable(167), timeout-event-threshold(168), timeout-event-threshold-enable-disable(169), timeout-event-threshold-url(170), timeout-event-threshold-url-enable-disable(171), timeout-event-threshold-period(172), timeout-event-threshold-period-enable-disable(173), timeout-event-threshold-period-url(174), timeout-event-threshold-period-url-enable-disable(175), timeout-event-npolls(176), timeout-event-npolls-enable-disable(177), timeout-event-npolls-url(178), timeout-event-npolls-url-enable-disable(179), timeout-event-npolls-period(180), timeout-event-npolls-period-enable-disable(181), timeout-event-npolls-period-url(182), timeout-event-npolls-period-url-enable-disable(183), timeout-event-npolls-threshold(184), timeout-event-npolls-threshold-enable-disable(185), timeout-event-npolls-threshold-url(186), timeout-event-npolls-threshold-url-enable-disable(187), timeout-event-npolls-threshold-period(188), timeout-event-npolls-threshold-period-enable-disable(189), timeout-event-npolls-threshold-period-url(190), timeout-event-npolls-threshold-period-url-enable-disable(191), pagetype(256), pagetype-enabled-disabled(257), pagetype-url(258), pagetype-url-enabled-disabled(259), pagetype-period(260), pagetype-period-enabled-disabled(261), pagetype-period-url(262), pagetype-period-url-enabled-disabled(263), pagetype-threshold(264), pagetype-threshold-enabled-disabled(265), pagetype-threshold-url(266), pagetype-threshold-url-enabled-disabled(267), pagetype-threshold-period(268), pagetype-threshold-period-enabled-disabled(269), pagetype-threshold-period-url(270), pagetype-threshold-period-url-enabled-disabled(271), pagetype-npolls(272), pagetype-npolls-enabled-disabled(273), pagetype-npolls-url(274), pagetype-npolls-url-enabled-disabled(275), pagetype-npolls-period(276), pagetype-npolls-period-enabled-disabled(277), pagetype-npolls-period-url(278), pagetype-npolls-period-url-enabled-disabled(279), pagetype-npolls-threshold(280), pagetype-npolls-threshold-enabled-disabled(281), pagetype-npolls-threshold-url(282), pagetype-npolls-threshold-url-enabled-disabled(283), pagetype-npolls-threshold-period(284), pagetype-npolls-threshold-period-enabled-disabled(285), pagetype-npolls-threshold-period-url(286), pagetype-npolls-threshold-period-url-enabled-disabled(287), pagetype-event(288), pagetype-event-enable-disable(289), pagetype-event-url(290), pagetype-event-url-enable-disable(291), pagetype-event-period(292), pagetype-event-period-enable-disable(293), pagetype-event-period-url(294), pagetype-event-period-url-enable-disable(295), pagetype-event-threshold(296), pagetype-event-threshold-enable-disable(297), pagetype-event-threshold-url(298), pagetype-event-threshold-url-enable-disable(299), pagetype-event-threshold-period(300), pagetype-event-threshold-period-enable-disable(301), pagetype-event-threshold-period-url(302), pagetype-event-threshold-period-url-enable-disable(303), pagetype-event-npolls(304), pagetype-event-npolls-enable-disable(305), pagetype-event-npolls-url(306), pagetype-event-npolls-url-enable-disable(307), pagetype-event-npolls-period(308), pagetype-event-npolls-period-enable-disable(309), pagetype-event-npolls-period-url(310), pagetype-event-npolls-period-url-enable-disable(311), pagetype-event-npolls-threshold(312), pagetype-event-npolls-threshold-enable-disable(313), pagetype-event-npolls-threshold-url(314), pagetype-event-npolls-threshold-url-enable-disable(315), pagetype-event-npolls-threshold-period(316), pagetype-event-npolls-threshold-period-enable-disable(317), pagetype-event-npolls-threshold-period-url(318), pagetype-event-npolls-threshold-period-url-enable-disable(319), pagetype-timeout(384), pagetype-timeout-enabled-disabled(385), pagetype-timeout-url(386), pagetype-timeout-url-enabled-disabled(387), pagetype-timeout-period(388), pagetype-timeout-period-enabled-disabled(389), pagetype-timeout-period-url(390), pagetype-timeout-period-url-enabled-disabled(391), pagetype-timeout-threshold(392), pagetype-timeout-threshold-enabled-disabled(393), pagetype-timeout-threshold-url(394), pagetype-timeout-threshold-url-enabled-disabled(395), pagetype-timeout-threshold-period(396), pagetype-timeout-threshold-period-enabled-disabled(397), pagetype-timeout-threshold-period-url(398), pagetype-timeout-threshold-period-url-enabled-disabled(399), pagetype-timeout-npolls(400), pagetype-timeout-npolls-enabled-disabled(401), pagetype-timeout-npolls-url(402), pagetype-timeout-npolls-url-enabled-disabled(403), pagetype-timeout-npolls-period(404), pagetype-timeout-npolls-period-enabled-disabled(405), pagetype-timeout-npolls-period-url(406), pagetype-timeout-npolls-period-url-enabled-disabled(407), pagetype-timeout-npolls-threshold(408), pagetype-timeout-npolls-threshold-enabled-disabled(409), pagetype-timeout-npolls-threshold-url(410), pagetype-timeout-npolls-threshold-url-enabled-disabled(411), pagetype-timeout-npolls-threshold-period(412), pagetype-timeout-npolls-threshold-period-enabled-disabled(413), pagetype-timeout-npolls-threshold-period-url(414), pagetype-timeout-npolls-threshold-period-url-enabl-disabl(415), pagetype-timeout-event(416), pagetype-timeout-event-enable-disable(417), pagetype-timeout-event-url(418), pagetype-timeout-event-url-enable-disable(419), pagetype-timeout-event-period(420), pagetype-timeout-event-period-enable-disable(421), pagetype-timeout-event-period-url(422), pagetype-timeout-event-period-url-enable-disable(423), pagetype-timeout-event-threshold(424), pagetype-timeout-event-threshold-enable-disable(425), pagetype-timeout-event-threshold-url(426), pagetype-timeout-event-threshold-url-enable-disable(427), pagetype-timeout-event-threshold-period(428), pagetype-timeout-event-threshold-period-enable-disable(429), pagetype-timeout-event-threshold-period-url(430), pagetype-timeout-event-threshold-period-url-enable-disable(431), pagetype-timeout-event-npolls(432), pagetype-timeout-event-npolls-enable-disable(433), pagetype-timeout-event-npolls-url(434), pagetype-timeout-event-npolls-url-enable-disable(435), pagetype-timeout-event-npolls-period(436), pagetype-timeout-event-npolls-period-enable-disable(437), pagetype-timeout-event-npolls-period-url(438), pagetype-timeout-event-npolls-period-url-enable-disable(439), pagetype-timeout-event-npolls-threshold(440), pagetype-timeout-event-npolls-threshold-enable-disable(441), pagetype-timeout-event-npolls-threshold-url(442), pagetype-timeout-event-npolls-threshold-url-enable-disable(443), pagetype-timeout-event-npolls-threshold-period(444), pagetype-timeout-event-npolls-threshold-period-enabl-disabl(445), pagetype-timeout-event-npolls-threshold-period-url(446), pagetype-timeout-event-npolls-thresh-period-url-enabl-dsbl(447), max-redir(512), max-redir-enabled-disabled(513), max-redir-url(514), max-redir-url-enabled-disabled(515), max-redir-period(516), max-redir-period-enabled-disabled(517), max-redir-period-url(518), max-redir-period-url-enabled-disabled(519), max-redir-threshold(520), max-redir-threshold-enabled-disabled(521), max-redir-threshold-url(522), max-redir-threshold-url-enabled-disabled(523), max-redir-threshold-period(524), max-redir-threshold-period-enabled-disabled(525), max-redir-threshold-period-url(526), max-redir-threshold-period-url-enabled-disabled(527), max-redir-npolls(528), max-redir-npolls-enabled-disabled(529), max-redir-npolls-url(530), max-redir-npolls-url-enabled-disabled(531), max-redir-npolls-period(532), max-redir-npolls-period-enabled-disabled(533), max-redir-npolls-period-url(534), max-redir-npolls-period-url-enabled-disabled(535), max-redir-npolls-threshold(536), max-redir-npolls-threshold-enabled-disabled(537), max-redir-npolls-threshold-url(538), max-redir-npolls-threshold-url-enabled-disabled(539), max-redir-npolls-threshold-period(540), max-redir-npolls-threshold-period-enabled-disabled(541), max-redir-npolls-threshold-period-url(542), max-redir-npolls-threshold-period-url-enabled-disabled(543), max-redir-event(544), max-redir-event-enable-disable(545), max-redir-event-url(546), max-redir-event-url-enable-disable(547), max-redir-event-period(548), max-redir-event-period-enable-disable(549), max-redir-event-period-url(550), max-redir-event-period-url-enable-disable(551), max-redir-event-threshold(552), max-redir-event-threshold-enable-disable(553), max-redir-event-threshold-url(554), max-redir-event-threshold-url-enable-disable(555), max-redir-event-threshold-period(556), max-redir-event-threshold-period-enable-disable(557), max-redir-event-threshold-period-url(558), max-redir-event-threshold-period-url-enable-disable(559), max-redir-event-npolls(560), max-redir-event-npolls-enable-disable(561), max-redir-event-npolls-url(562), max-redir-event-npolls-url-enable-disable(563), max-redir-event-npolls-period(564), max-redir-event-npolls-period-enable-disable(565), max-redir-event-npolls-period-url(566), max-redir-event-npolls-period-url-enable-disable(567), max-redir-event-npolls-threshold(568), max-redir-event-npolls-threshold-enable-disable(569), max-redir-event-npolls-threshold-url(570), max-redir-event-npolls-threshold-url-enable-disable(571), max-redir-event-npolls-threshold-period(572), max-redir-event-npolls-threshold-period-enable-disable(573), max-redir-event-npolls-threshold-period-url(574), max-redir-event-npolls-threshold-period-url-enable-disable(575), max-redir-timeout(640), max-redir-timeout-enabled-disabled(641), max-redir-timeout-url(642), max-redir-timeout-url-enabled-disabled(643), max-redir-timeout-period(644), max-redir-timeout-period-enabled-disabled(645), max-redir-timeout-period-url(646), max-redir-timeout-period-url-enabled-disabled(647), max-redir-timeout-threshold(648), max-redir-timeout-threshold-enabled-disabled(649), max-redir-timeout-threshold-url(650), max-redir-timeout-threshold-url-enabled-disabled(651), max-redir-timeout-threshold-period(652), max-redir-timeout-threshold-period-enabled-disabled(653), max-redir-timeout-threshold-period-url(654), max-redir-timeout-threshold-period-url-enabled-disabled(655), max-redir-timeout-npolls(656), max-redir-timeout-npolls-enabled-disabled(657), max-redir-timeout-npolls-url(658), max-redir-timeout-npolls-url-enabled-disabled(659), max-redir-timeout-npolls-period(660), max-redir-timeout-npolls-period-enabled-disabled(661), max-redir-timeout-npolls-period-url(662), max-redir-timeout-npolls-period-url-enabled-disabled(663), max-redir-timeout-npolls-threshold(664), max-redir-timeout-npolls-threshold-enabled-disabled(665), max-redir-timeout-npolls-threshold-url(666), max-redir-timeout-npolls-threshold-url-enabled-disabled(667), max-redir-timeout-npolls-threshold-period(668), max-redir-timeout-npolls-threshold-period-enabled-disabled(669), max-redir-timeout-npolls-threshold-period-url(670), max-redir-timeout-npolls-threshold-period-url-enabl-disabl(671), max-redir-timeout-event(672), max-redir-timeout-event-enable-disable(673), max-redir-timeout-event-url(674), max-redir-timeout-event-url-enable-disable(675), max-redir-timeout-event-period(676), max-redir-timeout-event-period-enable-disable(677), max-redir-timeout-event-period-url(678), max-redir-timeout-event-period-url-enable-disable(679), max-redir-timeout-event-threshold(680), max-redir-timeout-event-threshold-enable-disable(681), max-redir-timeout-event-threshold-url(682), max-redir-timeout-event-threshold-url-enable-disable(683), max-redir-timeout-event-threshold-period(684), max-redir-timeout-event-threshold-period-enable-disable(685), max-redir-timeout-event-threshold-period-url(686), max-redir-timeout-event-threshold-period-url-enable-disable(687), max-redir-timeout-event-npolls(688), max-redir-timeout-event-npolls-enable-disable(689), max-redir-timeout-event-npolls-url(690), max-redir-timeout-event-npolls-url-enable-disable(691), max-redir-timeout-event-npolls-period(692), max-redir-timeout-event-npolls-period-enable-disable(693), max-redir-timeout-event-npolls-period-url(694), max-redir-timeout-event-npolls-period-url-enable-disable(695), max-redir-timeout-event-npolls-threshold(696), max-redir-timeout-event-npolls-threshold-enable-disable(697), max-redir-timeout-event-npolls-threshold-url(698), max-redir-timeout-event-npolls-threshold-url-enable-disable(699), max-redir-timeout-event-npolls-threshold-period(700), max-redir-timeout-event-npolls-threshold-period-enabl-dsbl(701), max-redir-timeout-event-npolls-threshold-period-url(702), max-redir-timeout-event-npolls-thresh-period-url-enabl-dsbl(703), max-redir-pagetype(768), max-redir-pagetype-enabled-disabled(769), max-redir-pagetype-url(770), max-redir-pagetype-url-enabled-disabled(771), max-redir-pagetype-period(772), max-redir-pagetype-period-enabled-disabled(773), max-redir-pagetype-period-url(774), max-redir-pagetype-period-url-enabled-disabled(775), max-redir-pagetype-threshold(776), max-redir-pagetype-threshold-enabled-disabled(777), max-redir-pagetype-threshold-url(778), max-redir-pagetype-threshold-url-enabled-disabled(779), max-redir-pagetype-threshold-period(780), max-redir-pagetype-threshold-period-enabled-disabled(781), max-redir-pagetype-threshold-period-url(782), max-redir-pagetype-threshold-period-url-enabled-disabled(783), max-redir-pagetype-npolls(784), max-redir-pagetype-npolls-enabled-disabled(785), max-redir-pagetype-npolls-url(786), max-redir-pagetype-npolls-url-enabled-disabled(787), max-redir-pagetype-npolls-period(788), max-redir-pagetype-npolls-period-enabled-disabled(789), max-redir-pagetype-npolls-period-url(790), max-redir-pagetype-npolls-period-url-enabled-disabled(791), max-redir-pagetype-npolls-threshold(792), max-redir-pagetype-npolls-threshold-enabled-disabled(793), max-redir-pagetype-npolls-threshold-url(794), max-redir-pagetype-npolls-threshold-url-enabled-disabled(795), max-redir-pagetype-npolls-threshold-period(796), max-redir-pagetype-npolls-threshold-period-enabled-disabled(797), max-redir-pagetype-npolls-threshold-period-url(798), max-redir-pagetype-npolls-threshold-period-url-enabled-disabled(799), max-redir-pagetype-event(800), max-redir-pagetype-event-enable-disable(801), max-redir-pagetype-event-url(802), max-redir-pagetype-event-url-enable-disable(803), max-redir-pagetype-event-period(804), max-redir-pagetype-event-period-enable-disable(805), max-redir-pagetype-event-period-url(806), max-redir-pagetype-event-period-url-enable-disable(807), max-redir-pagetype-event-threshold(808), max-redir-pagetype-event-threshold-enable-disable(809), max-redir-pagetype-event-threshold-url(810), max-redir-pagetype-event-threshold-url-enable-disable(811), max-redir-pagetype-event-threshold-period(812), max-redir-pagetype-event-threshold-period-enable-disable(813), max-redir-pagetype-event-threshold-period-url(814), max-redir-pagetype-event-threshold-period-url-enable-disable(815), max-redir-pagetype-event-npolls(816), max-redir-pagetype-event-npolls-enable-disable(817), max-redir-pagetype-event-npolls-url(818), max-redir-pagetype-event-npolls-url-enable-disable(819), max-redir-pagetype-event-npolls-period(820), max-redir-pagetype-event-npolls-period-enable-disable(821), max-redir-pagetype-event-npolls-period-url(822), max-redir-pagetype-event-npolls-period-url-enable-disable(823), max-redir-pagetype-event-npolls-threshold(824), max-redir-pagetype-event-npolls-threshold-enable-disable(825), max-redir-pagetype-event-npolls-threshold-url(826), max-redir-pagetype-event-npolls-threshold-url-enable-disable(827), max-redir-pagetype-event-npolls-threshold-period(828), max-redir-pagetype-event-npolls-threshold-period-enable-disable(829), max-redir-pagetype-event-npolls-threshold-period-url(830), max-redir-pagetype-event-npolls-threshold-period-url-enable-disable(831), max-redir-pagetype-timeout(896), max-redir-pagetype-timeout-enabled-disabled(897), max-redir-pagetype-timeout-url(898), max-redir-pagetype-timeout-url-enabled-disabled(899), max-redir-pagetype-timeout-period(900), max-redir-pagetype-timeout-period-enabled-disabled(901), max-redir-pagetype-timeout-period-url(902), max-redir-pagetype-timeout-period-url-enabled-disabled(903), max-redir-pagetype-timeout-threshold(904), max-redir-pagetype-timeout-threshold-enabled-disabled(905), max-redir-pagetype-timeout-threshold-url(906), max-redir-pagetype-timeout-threshold-url-enabled-disabled(907), max-redir-pagetype-timeout-threshold-period(908), max-redir-pagetype-timeout-threshold-period-enabled-disabled(909), max-redir-pagetype-timeout-threshold-period-url(910), max-redir-pagetype-timeout-threshold-period-url-enabled-disabled(911), max-redir-pagetype-timeout-npolls(912), max-redir-pagetype-timeout-npolls-enabled-disabled(913), max-redir-pagetype-timeout-npolls-url(914), max-redir-pagetype-timeout-npolls-url-enabled-disabled(915), max-redir-pagetype-timeout-npolls-period(916), max-redir-pagetype-timeout-npolls-period-enabled-disabled(917), max-redir-pagetype-timeout-npolls-period-url(918), max-redir-pagetype-timeout-npolls-period-url-enabled-disabled(919), max-redir-pagetype-timeout-npolls-threshold(920), max-redir-pagetype-timeout-npolls-threshold-enabled-disabled(921), max-redir-pagetype-timeout-npolls-threshold-url(922), max-redir-pagetype-timeout-npolls-threshold-url-enabled-disabled(923), max-redir-pagetype-timeout-npolls-threshold-period(924), max-redir-pagetype-timeout-npolls-threshold-period-enabled-disabled(925), max-redir-pagetype-timeout-npolls-threshold-period-url(926), max-redir-pagetype-timeout-npolls-threshold-period-url-enabl-disabl(927), max-redir-pagetype-timeout-event(928), max-redir-pagetype-timeout-event-enable-disable(929), max-redir-pagetype-timeout-event-url(930), max-redir-pagetype-timeout-event-url-enable-disable(931), max-redir-pagetype-timeout-event-period(932), max-redir-pagetype-timeout-event-period-enable-disable(933), max-redir-pagetype-timeout-event-period-url(934), max-redir-pagetype-timeout-event-period-url-enable-disable(935), max-redir-pagetype-timeout-event-threshold(936), max-redir-pagetype-timeout-event-threshold-enable-disable(937), max-redir-pagetype-timeout-event-threshold-url(938), max-redir-pagetype-timeout-event-threshold-url-enable-disable(939), max-redir-pagetype-timeout-event-threshold-period(940), max-redir-pagetype-timeout-event-threshold-period-enable-disable(941), max-redir-pagetype-timeout-event-threshold-period-url(942), max-redir-pagetype-timeout-event-threshold-period-url-enable-disable(943), max-redir-pagetype-timeout-event-npolls(944), max-redir-pagetype-timeout-event-npolls-enable-disable(945), max-redir-pagetype-timeout-event-npolls-url(946), max-redir-pagetype-timeout-event-npolls-url-enable-disable(947), max-redir-pagetype-timeout-event-npolls-period(948), max-redir-pagetype-timeout-event-npolls-period-enable-disable(949), max-redir-pagetype-timeout-event-npolls-period-url(950), max-redir-pagetype-timeout-event-npolls-period-url-enable-disable(951), max-redir-pagetype-timeout-event-npolls-threshold(952), max-redir-pagetype-timeout-event-npolls-threshold-enable-disable(953), max-redir-pagetype-timeout-event-npolls-threshold-url(954), max-redir-pagetype-timeout-event-npolls-threshold-url-enable-disable(955), max-redir-pagetype-timeout-event-npolls-threshold-period(956), max-redir-pagetype-timeout-event-npolls-threshold-period-enabl-dsbl(957), max-redir-pagetype-timeout-event-npolls-threshold-period-url(958), max-redir-pagetype-timeout-event-npolls-thresh-period-url-enabl-dsbl(959). |
| telProdWebProbeMonProbeEntry | 1.3.6.1.4.1.2007.4.58.2.1.1 | not-accessible | Each entry consists of the following parameters: the probe identifier, the probe status, the address of the URL to which the probe is connected, the type of this probe (periodic, immediate, or none if it is still in waiting state), the type of periodicity and the value of the period the probe boots with, the speed threshold configured for the probe, the number of failures that have been produced in the probe (number of times the measured speed is below the threshold), the number of failures permitted, a variable to indicate if this TRAP 'Threshold not reached' is enabled, the type of the last probe, the date and time of the last connection produced, the value of the speed, in bits per second, measured in the last probe carried out, the date and time when next connection must be started, a variable which indicates if the possible configuration changes have been updated and other which specifies these changes produced, the variable which indicates the value of the timeout for this probe and the kind of page to request. | |
| INT telProdWebProbeMonProbeEvent | 1.3.6.1.4.1.2007.4.58.2.1.1.10 | INTEGER | read-only | The value of this variable indicates if the 'Threshold not reached' TRAP generation is enabled or disabled. This variable can take the values enabled (1) or disabled (2). |
| CTR telProdWebProbeMonProbeFailures | 1.3.6.1.4.1.2007.4.58.2.1.1.8 | Counter | read-only | Number of failures that have been produced in the probe, i.e. the number of consecutive times the measured speed has been below the configured threshold. When the number of failures produced is equal to the number of failures permitted, an SNMP event is generated indicating problems in the connection. A measurement received above the threshold will restart the counter. |
| INT telProdWebProbeMonProbeIndex | 1.3.6.1.4.1.2007.4.58.2.1.1.1 | INTEGER | read-only | Index of the table: probe identifier. |
| OCT telProdWebProbeMonProbeInitDate | 1.3.6.1.4.1.2007.4.58.2.1.1.12 | OCTET STRING | read-only | The date of the last connection produced. If no connection has yet been produced, this is shown as 0, and if the type of the last probe, which is stored in the variable telProdWebProbeMonProbeLastProbe, is no-probe (0), no information will be showed. |
| OCT telProdWebProbeMonProbeInitTime | 1.3.6.1.4.1.2007.4.58.2.1.1.13 | OCTET STRING | read-only | The time when the last connection was produced. If no connection has yet been produced, this is shown as 0, and if the type of the last probe, which is stored in the variable telProdWebProbeMonProbeLastProbe, is no-probe (0), no information will be showed. |
| INT telProdWebProbeMonProbeLastProbe | 1.3.6.1.4.1.2007.4.58.2.1.1.11 | INTEGER | read-only | The value of this variable indicates the type of the last probe: no-probe(0), periodic(1), immediate(2). |
| INT telProdWebProbeMonProbeLastSpeed | 1.3.6.1.4.1.2007.4.58.2.1.1.14 | INTEGER | read-only | Speed, in bits per second, measured in the last probe carried out. If the variable which indicates the type of the last probe takes the value 0 (no-probe), the value of the last mesasured speed is shown as 0. |
| OCT telProdWebProbeMonProbeNextDate | 1.3.6.1.4.1.2007.4.58.2.1.1.15 | OCTET STRING | read-only | The date when next connection must be started. If the probe is disabled or its type of periodicity is 0 (none), or its status is executing (2) or pending-execution(4), no information will be showed. |
| OCT telProdWebProbeMonProbeNextTime | 1.3.6.1.4.1.2007.4.58.2.1.1.16 | OCTET STRING | read-only | The time when next connection must be started. If the probe is disabled or its type of periodicity is 0 (none), or its status is executing (2) or pending-execution(4), no information will be showed. |
| INT telProdWebProbeMonProbeNPolls | 1.3.6.1.4.1.2007.4.58.2.1.1.9 | INTEGER | read-only | Number of failures permitted (number of consecutive times the measured speed can be below the configured threshold). When the number of failures produced is equal to the number of failures permitted, an SNMP event (TRAP) is generated indicating problems in the connection. |
| INT telProdWebProbeMonProbePageType | 1.3.6.1.4.1.2007.4.58.2.1.1.20 | INTEGER | read-only | The value of this variable indicates if the page to download is generic(1) or specific(2). If the page is generic, the content of the response is not parsed. If the page is specific, the probe expects an specific structure in the response |
| INT telProdWebProbeMonProbePeriodType | 1.3.6.1.4.1.2007.4.58.2.1.1.5 | INTEGER | read-only | This variable indicates the type of periodicity: (0) none, (1) minutes, (2) hours, (3) days, (4) months. The value 0 (none) indicates that the probe is not periodic. This is equivalent to have the probe disabled. When the device boots, the probe boots with periodicity showed through this variable and the next (value of the period). |
| INT telProdWebProbeMonProbePeriodValue | 1.3.6.1.4.1.2007.4.58.2.1.1.6 | INTEGER | read-only | This variable indicates the value of the period, in minutes, hours, days or months depending on the type of periodicity used, which is stored in the previous variable. When the device boots, the probe boots with periodicity showed through this variable and the previous (type of periodicity). If the type of periodicity is none (0), the value of this variable has no sense and it will be shown as 0. |
| INT telProdWebProbeMonProbeStatus | 1.3.6.1.4.1.2007.4.58.2.1.1.2 | INTEGER | read-only | The probe state. It can be one of the following: waiting(1), pending-execution(2), executing(3), completed-ok(4), completed-with-error (5), request-required(6); if the probe is disabled or its type of periodicity is 0 (none), and it is not an immediate probe, the value of this variable will be 0 (disabled). |
| telProdWebProbeMonProbeTable | 1.3.6.1.4.1.2007.4.58.2.1 | not-accessible | This table contains the most relevant information about the periodic probes being executed. The parameters included in each entry are as follows: the probe identifier (which is the index of the table), the probe status, the address of the URL to which the probe is connected, the type of this probe (periodic, immediate, or none if it is still in waiting state), the type of periodicity and the value of the period the probe boots with, the speed threshold configured for the probe, the number of failures that have been produced in the probe (number of times the measured speed is below the threshold), the number of failures permitted, a variable to indicate if this TRAP 'Threshold not reached' is enabled, the type of the last probe, the date and time of the last connection produced, the value of the speed, in bits per second, measured in the last probe carried out, the date and time when next connection must be started, a variable which indicates if the possible configuration changes have been updated and other which specifies these changes produced, the variable which indicates the value of the timeout for this probe and the kind of page to request. | |
| INT telProdWebProbeMonProbeThreshold | 1.3.6.1.4.1.2007.4.58.2.1.1.7 | INTEGER | read-only | Speed threshold configured for the probe (in bits per second). |
| INT telProdWebProbeMonProbeTimeout | 1.3.6.1.4.1.2007.4.58.2.1.1.19 | INTEGER | read-only | Value of the timeout for this probe. |
| INT telProdWebProbeMonProbeType | 1.3.6.1.4.1.2007.4.58.2.1.1.4 | INTEGER | read-only | This variable indicates if this probe is periodic(1) or immediate(2). If the status of probe is waiting(1), the value of this variable is 0 (probe-waiting). |
| STR telProdWebProbeMonProbeUrl | 1.3.6.1.4.1.2007.4.58.2.1.1.3 | DisplayString | read-only | The address of the Web page or URL to which the probe is connected. |
| INT telProdWebProbeMonResetPPPCommand | 1.3.6.1.4.1.2007.4.58.2.3.1.2 | INTEGER | read-write | If the value of this variable is set to 1, the PPP connection established through the interface given by the index will be disconnect. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the last operation was made succesfully; error (3), if the the operation failed; the value undefined (4) indicates that operations of this type have not been made yet. |
| telProdWebProbeMonResetPPPEntry | 1.3.6.1.4.1.2007.4.58.2.3.1 | not-accessible | Each entry refers to one of the the possible PPP connections or one of the configured PPP interfaces, and consists of two variables: the number of the PPP interface, which is the index of the table, a variable which is used to disconnect the PPP connection when a SET operation to this variable is carried out (and gives it the value 1), and a variable which value indicates the type of the PPP: PPPoA or PPPoE. | |
| INT telProdWebProbeMonResetPPPIndex | 1.3.6.1.4.1.2007.4.58.2.3.1.1 | INTEGER | read-only | Index of the table: number of the PPP interface. |
| telProdWebProbeMonResetPPPTable | 1.3.6.1.4.1.2007.4.58.2.3 | not-accessible | This table allows to disconnect a PPP connection established through the interface whose number is given by the index. Each entry refers to one of the possible PPP connections or one of the configured PPP interfaces, and consists of two variables: the number of the PPP interface, which is the index of the table, a variable which is used to disconnect the PPP connection when a SET operation to this variable is carried out (and gives it the value 1), and a variable which value indicates the type of the PPP: PPPoA or PPPoE. | |
| INT telProdWebProbeMonResetPPPType | 1.3.6.1.4.1.2007.4.58.2.3.1.3 | INTEGER | read-only | The value of this variable indicates the type of the PPP interface correspondig to this entry: PPPoA (1) or PPPoE (2). |
| INT telProdWebProbeMonStartCommand | 1.3.6.1.4.1.2007.4.58.2.2.1.2 | INTEGER | read-write | If the value of this variable is set to 1, the execution of the probe whose identifier takes the value given by the index will start. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the last operation was made succesfully; the value undefined (3) indicates that operations of this type have not been made yet. If the operation failed, this variable could take different values depending on the error cause: not-found-in-SRAM (4), if the probe was in memory but not in a SRAM register; wrong-identifier(5) if the probe identifier introduced was not correct; already-started (6) indicates that the probe which was going to be started was started previously and was in execution. |
| telProdWebProbeMonStartEntry | 1.3.6.1.4.1.2007.4.58.2.2.1 | not-accessible | Each entry refers to one of the configured probes, and consists of two variables: the identifier of the probe, which is the index of the table, and a variable which is used to start the execution of the probe when a SET operation to this variable is made (and gives it the value 1). | |
| INT telProdWebProbeMonStartIndex | 1.3.6.1.4.1.2007.4.58.2.2.1.1 | INTEGER | read-only | Index of the table: probe identifier. |
| telProdWebProbeMonStartTable | 1.3.6.1.4.1.2007.4.58.2.2 | not-accessible | This table allows to start the execution of the probe whose identifier takes the value given by the index. Each entry refers to one of the configured probes, and consists of two variables: the identifier of the probe, which is the index of the table, and a variable which is used to start the execution of the probe when a SET operation to this variable is made (and gives it the value 1). |
RFC description
Configures and monitors web probe functionality for HTTP/HTTPS monitoring and connection statistics in Teldat equipment.
Start monitoring Teldat router, active web-probe capable models (HTTP/HTTPS synthetic-monitoring probe status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.