All MIBs › TELDAT-MON-INTERF-WLAN-MIB
Category: Teldat Router Management, Wireless and Cellular Networking
Description: Monitors Teldat router WLAN interface radio status, associated client count, and wireless traffic statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TELDAT-MON-INTERF-WLAN-MIB?
TELDAT-MON-INTERF-WLAN-MIB is a Teldat-specific monitoring MIB for the WLAN radio interfaces on Teldat routers with built-in Wi-Fi capability, exposing per-radio configuration and operational parameters. It provides data such as radio operating mode, link speed, channel, transmit power, regulatory band and country, RTS threshold, and interface MAC address. Its monitoring value covers both configuration verification and operational status of the wireless hardware: confirming the radio is on the expected channel/band/country regulatory domain and tracking transmit power and speed settings that affect coverage and throughput. It relies on Teldat's standard interface monitoring conventions, likely correlating with IF-MIB interface indices for the WLAN radio. It is deployed on Teldat routers with integrated WLAN access point functionality in branch-office or small-site network deployments. Engineers can download the TELDAT-MON-INTERF-WLAN-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-INTERF-WLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Teldat router with integrated WLAN radio
Monitoring Examples
An administrator would poll telProdNpMonInterfWlanRadioTable, keyed by telProdNpMonInterfWlanRadioIfIndex, to check telProdNpMonInterfWlanRadioIfMode, telProdNpMonInterfWlanRadioIfSpeed, and telProdNpMonInterfWlanRadioIfChannel for the radio's current operating configuration. telProdNpMonInterfWlanRadioIfTxPower and telProdNpMonInterfWlanRadioIfBand/IfCountry would be checked to confirm the radio is operating within the correct regulatory power and frequency limits for its deployment country. An unexpectedly low telProdNpMonInterfWlanRadioIfSpeed or an unexpected telProdNpMonInterfWlanRadioIfChannel value could indicate interference, misconfiguration, or a radio fault.
What Can Be Monitored
- WLAN radio operating mode
- radio link speed
- radio channel
- transmit power
- RTS threshold
- regulatory band and country
This MIB depends on
Related MIBs
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| telProdNpMonInterfWlan | 1.3.6.1.4.1.2007.4.1.2.2.2.24 | |||
| MAC telProdNpMonInterfWlanACLAddress | 1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1.2 | MacAddress | read-only | The MAC Address for the accepted client |
| telProdNpMonInterfWlanACLEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1 | not-accessible | The WLAN Access List based on MAC Addresses entry. Index: telProdNpMonInterfWlanACLIfIndex telProdNpMonInterfWlanACLAddress. | |
| INT telProdNpMonInterfWlanACLIfIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1.1 | INTEGER | read-only | The Interface the MAC Address belongs. |
| telProdNpMonInterfWlanACLTable | 1.3.6.1.4.1.2007.4.1.2.2.2.24.4 | not-accessible | The WLAN Access List based on MAC Addresses | |
| INT telProdNpMonInterfWlanBSSAcl | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.13 | INTEGER | read-only | MAC Media Access Control via MAC Address. |
| INT telProdNpMonInterfWlanBSSAkm | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.5 | INTEGER | read-only | The Authenticated Key Management setting. |
| INT telProdNpMonInterfWlanBSSBeaconPeriod | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.17 | INTEGER | read-only | This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames. |
| MAC telProdNpMonInterfWlanBSSBssId | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.16 | MacAddress | read-only | This object contains the actual current BSSID for the service set. |
| C32 telProdNpMonInterfWlanBSSBytesRx | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.22 | Counter32 | read-only | Received Bytes. |
| C32 telProdNpMonInterfWlanBSSBytesTx | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.21 | Counter32 | read-only | Transmitted Bytes. |
| INT telProdNpMonInterfWlanBSSCipher | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.6 | INTEGER | read-only | The ciphers in use for WPA or WPA2. auto(1) is used for TKIP and AES |
| INT telProdNpMonInterfWlanBSSClientIsolation | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.14 | INTEGER | read-only | Client isolation setting. |
| INT telProdNpMonInterfWlanBSSCurrent | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.23 | INTEGER | read-only | Count of current associated stations |
| INT telProdNpMonInterfWlanBSSDefaultKey | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.7 | INTEGER | read-only | Default key for WEP encryption. This is the key used to transmit data frames if WEP is enabled |
| INT telProdNpMonInterfWlanBSSDTIMPeriod | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.18 | INTEGER | read-only | This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. |
| telProdNpMonInterfWlanBSSEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1 | not-accessible | A base list of objects that are information about BSS data. The index is the number of the interface | |
| INT telProdNpMonInterfWlanBSSHidden | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.15 | INTEGER | read-only | Define whether SSID is hidden (yes(2)) or not (no(1)). |
| STR telProdNpMonInterfWlanBSSId | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.2 | DisplayString | read-only | This attribute reflects the SSID. |
| INT telProdNpMonInterfWlanBSSIfIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.1 | INTEGER | read-only | Unique BSS index. |
| OCT telProdNpMonInterfWlanBSSKey1 | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.8 | OCTET STRING | read-only | Key string for WEP key number 1. |
| OCT telProdNpMonInterfWlanBSSKey2 | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.9 | OCTET STRING | read-only | Key string for WEP key number 2. |
| OCT telProdNpMonInterfWlanBSSKey3 | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.10 | OCTET STRING | read-only | Key string for WEP key number 3. |
| OCT telProdNpMonInterfWlanBSSKey4 | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.11 | OCTET STRING | read-only | Key string for WEP key number 4. |
| INT telProdNpMonInterfWlanBSSMaxAsoc | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.12 | INTEGER | read-only | The number of allowed clients of the requested BSS. |
| C32 telProdNpMonInterfWlanBSSMSDURx | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.20 | Counter32 | read-only | This attribute counts the total number of packets received by this BSS. |
| C32 telProdNpMonInterfWlanBSSMSDUTx | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.19 | Counter32 | read-only | This attribute counts the total number of packets transmitted on this BSS. |
| INT telProdNpMonInterfWlanBSSOpMode | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.24 | INTEGER | read-only | This value specify that the scan properties is used for AP, client or wds. |
| OCT telProdNpMonInterfwlanBSSPassPhrase | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.25 | OCTET STRING | read-only | Passphrase string for WPA-PSK and WPA2-PSK. |
| INT telProdNpMonInterfWlanBSSPrivInvoked | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.3 | INTEGER | read-only | Privacy invoked. If enabled, some level of security is invoked when transmitting data frames. |
| INT telProdNpMonInterfWlanBSSRsn | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.4 | INTEGER | read-only | The Robust Security Network setting. |
| telProdNpMonInterfWlanBSSTable | 1.3.6.1.4.1.2007.4.1.2.2.2.24.2 | not-accessible | Describes a WLAN VSS and the corresponding settings | |
| INT telProdNpMonInterfWlanClientAkm | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.6 | INTEGER | read-only | The Authenticated Key Management setting. |
| INT telProdNpMonInterfWlanClientCipher | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.7 | INTEGER | read-only | The ciphers in use for WPA or WPA2. auto(1) is used for TKIP and AES |
| INT telProdNpMonInterfWlanClientDefaultKey | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.8 | INTEGER | read-only | Default key for WEP encryption. This is the key used to transmit data frames if WEP is enabled |
| telProdNpMonInterfwlanClientEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1 | not-accessible | A base list of objects with information about the networks the WLAN can connect to when acting as a client. The indexes are the number of the WLAN interface and the network index | |
| INT telProdNpMonInterfWlanClientIfIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.1 | INTEGER | read-only | WLAN interface index. |
| OCT telProdNpMonInterfWlanClientKey1 | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.9 | OCTET STRING | read-only | Key string for WEP key number 1. |
| OCT telProdNpMonInterfWlanClientKey2 | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.10 | OCTET STRING | read-only | Key string for WEP key number 2. |
| OCT telProdNpMonInterfWlanClientKey3 | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.11 | OCTET STRING | read-only | Key string for WEP key number 3. |
| OCT telProdNpMonInterfWlanClientKey4 | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.12 | OCTET STRING | read-only | Key string for WEP key number 4. |
| OCT telProdNpMonInterfwlanClientPassPhrase | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.13 | OCTET STRING | read-only | Passphrase string for WPA-PSK and WPA2-PSK. |
| INT telProdNpMonInterfWlanClientPriority | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.3 | INTEGER | read-only | Priority of the network. The higher the priority, the sooner the client tries to associate with it. |
| INT telProdNpMonInterfWlanClientPrivInvoked | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.4 | INTEGER | read-only | Privacy invoked. If enabled, some level of security is invoked when transmitting data frames. |
| INT telProdNpMonInterfWlanClientRsn | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.5 | INTEGER | read-only | The Robust Security Network settings. |
| STR telProdNpMonInterfWlanClientSSID | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.2 | DisplayString | read-only | The Service Set Name |
| telProdNpMonInterfWlanClientTable | 1.3.6.1.4.1.2007.4.1.2.2.2.24.7 | not-accessible | Describes a WLAN Client and the corresponding settings | |
| telProdNpMonInterfWlanRadioEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1 | not-accessible | A base list of objects that are information about Wlan radio data. The index is the number of the interface | |
| MAC telProdNpMonInterfWlanRadioIfAddress | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.9 | MacAddress | read-only | The MAC Address. |
| INT telProdNpMonInterfWlanRadioIfBand | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.7 | INTEGER | read-only | Frequency band. |
| INT telProdNpMonInterfWlanRadioIfChannel | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.4 | INTEGER | read-only | The physical channel |
| STR telProdNpMonInterfWlanRadioIfCountry | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.8 | DisplayString | read-only | This attribute identifies the country in which the station is operating. The first two octets of this string is the two character country code as described in document ISO/IEC 3166-1. The third octet shall be one of the following: 1. an ASCII space character, if the regulations under which the station is operating encompass all environments in the country, 2. an ASCII 'O' character, if the regulations under which the station is operating are for an Outdoor environment only, or 3. an ASCII 'I' character, if the regulations under which the station is operating are for an Indoor environment only. |
| INT telProdNpMonInterfWlanRadioIfFragmentThreshold | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.11 | INTEGER | read-only | This attribute shall specify the mandatory maximum size, in octets, of the PSDU that may be delivered to the PHY. This maximum size does not apply in the case of A-MPDU. An MSDU, A-MSDU or MMPDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU, A-MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 8000 or the aMPDUMaxLength or the aPSDUMaxLength of the attached PHY and shall never exceed the lesser of 8000 or the aMPDUMaxLength or the aPSDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256. |
| INT telProdNpMonInterfWlanRadioIfIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.1 | INTEGER | read-only | Unique radio index. |
| INT telProdNpMonInterfWlanRadioIfMode | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.2 | INTEGER | read-only | Mixed and compatibility modes between various 802.11 substandards. |
| INT telProdNpMonInterfWlanRadioIfRealChannel | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.10 | INTEGER | read-only | The actually selected channel for transmit and receive. In most cases this is the same value as wlanIfChannel, except if automatic channel selection is active. In this case, this variable shows the channel in use. |
| INT telProdNpMonInterfWlanRadioIfRtsThreshold | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.5 | INTEGER | read-only | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed, except as RTS/CTS is used as a cross modulation protection mechanism. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to one shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. |
| INT telProdNpMonInterfWlanRadioIfSpeed | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.3 | INTEGER | read-only | The value defines the bitrate or the coding scheme to use for data frames. |
| INT telProdNpMonInterfWlanRadioIfTxPower | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.6 | INTEGER | read-only | Transmitter output power in dBm. |
| telProdNpMonInterfWlanRadioTable | 1.3.6.1.4.1.2007.4.1.2.2.2.24.1 | not-accessible | The telProdNpMonInterfWlanRadioTable contains information relating to the interfaces available on the system. Each entry corresponds to an available WLAN interface. Entries cannot be added or deleted by the user. Creating entries: Entries are created by the system automatically when a new WLAN module is installed. Deleting entries: Entries are removed by the system after the appropriate WLAN module is removed. | |
| STR telProdNpMonInterfWlanScanResultsBasicRates | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.10 | DisplayString | read-only | This attribute contains one octet for each required basic rate in this BSS, in Mbps units. |
| INT telProdNpMonInterfWlanScanResultsBeaconPeriod | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.8 | INTEGER | read-only | This attribute contains the number of TU that this BSS uses for scheduling Beacon transmissions. |
| MAC telProdNpMonInterfWlanScanResultsBSSID | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.3 | MacAddress | read-only | BSSID of this BSS. |
| INT telProdNpMonInterfWlanScanResultsChannel | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.5 | INTEGER | read-only | The channel this BSS was received on. |
| telProdNpMonInterfWlanScanResultsEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1 | not-accessible | A entry of the table. Index: telProdNpMonInterfWlanScanResultsIfIndex, telProdNpMonInterfWlanScanResultsIndex | |
| STR telProdNpMonInterfWlanScanResultsExtendedRates | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.11 | DisplayString | read-only | This attribute contains one octet for each supported extended rate in this BSS, in Mbps units. |
| INT telProdNpMonInterfWlanScanResultsIfIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.1 | INTEGER | read-only | ifIndex of the WLAN Interface the scan results belong to. |
| INT telProdNpMonInterfWlanScanResultsIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.2 | INTEGER | read-only | Auxiliary index for different BSS entries. |
| WLA telProdNpMonInterfWlanScanResultsNoise | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.7 | WlanRSSI | read-only | This attribute shows the measured noise level in dBm, or 0 when this value is not available. It's the value measured during the last reception of data. |
| STR telProdNpMonInterfWlanScanResultsRates | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.9 | DisplayString | read-only | This attribute contains one octet for each supported rate in this BSS, in Mbps units. |
| WLA telProdNpMonInterfWlanScanResultsSignal | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.6 | WlanRSSI | read-only | Receive signal strength of this BSS. |
| STR telProdNpMonInterfWlanScanResultsSSID | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.4 | DisplayString | read-only | SSID aka network name of this BSS. If broadcasting of SSID is disabled on this BSS, this string may be empty. |
| telProdNpMonInterfWlanScanResultsTable | 1.3.6.1.4.1.2007.4.1.2.2.2.24.5 | not-accessible | This table contains the list of BSS entries found by foreground or background scanning in client mode. | |
| MAC telProdNpMonInterfWlanStationAddress | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.2 | MacAddress | read-only | MAC Address of the Assigned STA. |
| C32 telProdNpMonInterfWlanStationBytesRx | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.9 | Counter32 | read-only | This attribute counts the total number of octets received from this station. |
| C32 telProdNpMonInterfWlanStationBytesTx | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.8 | Counter32 | read-only | This attribute counts the total number of octets transmitted to this station. |
| C32 telProdNpMonInterfWlanStationConnectTime | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.13 | Counter32 | read-only | This attribute records the system uptime at the moment the client successfully finished association. |
| telProdNpMonInterfWlanStationEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1 | not-accessible | A base list of objects that are information about stations. The index is the number of the interface and the MAC address of the station | |
| INT telProdNpMonInterfWlanStationIfIndex | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.1 | INTEGER | read-only | Interface number. |
| C32 telProdNpMonInterfWlanStationMSDURx | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.7 | Counter32 | read-only | This attribute counts the total number of packets received from this station. |
| C32 telProdNpMonInterfWlanStationMSDUTx | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.6 | Counter32 | read-only | This attribute counts the total number of packets transmitted to this station. |
| INT telProdNpMonInterfWlanStationNode | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.5 | INTEGER | read-only | The Node type of the Station. |
| WLA telProdNpMonInterfWlanStationNoise | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.12 | WlanRSSI | read-only | This attribute shows the measured noise level in dBm, or 0 if no connection can be established. |
| WLA telProdNpMonInterfWlanStationRate | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.10 | WlanRate | read-only | This attribute reflects the data rate of the latest packet received from this station, in 500 kbps units. |
| INT telProdNpMonInterfWlanStationSecurity | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.4 | INTEGER | read-only | The Security Option of the Station. |
| WLA telProdNpMonInterfWlanStationSignal | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.11 | WlanRSSI | read-only | This attribute shows the received signal strength in dBm. |
| INT telProdNpMonInterfWlanStationState | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.3 | INTEGER | read-only | Station state. |
| telProdNpMonInterfWlanStationTable | 1.3.6.1.4.1.2007.4.1.2.2.2.24.3 | not-accessible | The telProdNpMonInterfWlanStation contains information relating to the clients currently associated to our access points. Each entry corresponds to an associated client station (STA). Entries cannot be added or deleted by the user. Creating entries: Entries are created by the system automatically when a new STA ia associated. Deleting entries: Entries are removed by the system whenever an associated STA is removed. | |
| INT telProdNpMonInterfWlanWMMAccCat | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.2 | INTEGER | read-only | Access category type, each category is mandatory for a wlanIf. An access category (AC) is a label for the common set of enhanced distributed channel access (EDCA) parameters that are used by a quality of service (QoS) station (QSTA) to contend for the channel in order to transmit medium access control (MAC) service data units (MSDUs) with certain priorities. (More info in '802.11E / 3.123 access category (AC)'). besteffort(1): standard/default priority background(2): low priority video(3): medium priority (higher than 'besteffort') voice(4): high priority |
| INT telProdNpMonInterfWlanWMMAckPolicy | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.8 | INTEGER | read-only | Ack policy for this Access category (default value is 'ack(1)'). |
| INT telProdNpMonInterfWlanWMMACM | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.9 | INTEGER | read-only | ACM (admission control) policy for this Access category i (default value is 'disabled(2)'). |
| INT telProdNpMonInterfWlanWMMaCWmax | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.5 | INTEGER | read-only | Maximum size of contention window. for AC_BK telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmax, for AC_BE telProdNpMonInterfWlanWMMaCWmax = 4*telProdNpMonInterfWlanIfCWmin + 3, for AC_VI telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmin, for AC_VO telProdNpMonInterfWlanWMMaCWmax = (telProdNpMonInterfWlanIfCWmin-1)/2. |
| INT telProdNpMonInterfWlanWMMaCWmin | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.4 | INTEGER | read-only | Minimum size of contention window. for AC_BK and AC_BE telProdNpMonInterfWlanWMMaCWmin = telProdNpMonInterfWlanIfCWmin, for AC_VI telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-1)/2, for AC_VO telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-3)/4. |
| INT telProdNpMonInterfWlanWMMAifsn | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.6 | INTEGER | read-only | Arbitration Inter-Frame Space Number (AIFSN) for this Access category. |
| telProdNpMonInterfWlanWMMEntry | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1 | not-accessible | A entry of the table. Index: telProdNpMonInterfWlanWMMAccCat, telProdNpMonInterfWlanWMMwlanIf, telProdNpMonInterfWlanWMMType | |
| telProdNpMonInterfWlanWMMTable | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6 | not-accessible | Describes a WLAN WMM Access category settings | |
| INT telProdNpMonInterfWlanWMMTxopLimit | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.7 | INTEGER | read-only | 802.11 mode Transmit Opportunity Limit. The TxopLimit value is given in units of 32 microseconds. |
| INT telProdNpMonInterfWlanWMMType | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.3 | INTEGER | read-only | Type to which this telProdNpMonInterfWlanWMMEntry corresponds. Type access-point means the own parameters for WMM are changed. The entries with type station will be provided to the connected stations via WMM-IE. |
| INT telProdNpMonInterfWlanWMMwlanIf | 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.1 | INTEGER | read-only | Radio index the AC belongs to. |
RFC description
Teldat vendor-private MIB for monitoring wireless LAN interface statistics and performance metrics.
Start monitoring Teldat routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.